Man you’re a beast! I tried to wrestle my tire on and it took 3-4 hours of wrestling in between beer breaks. By the end I was drunk as shit and fell on my face on my garage floor

Thank you, thank you, Roy -- for not just offering practical information, but humor that helped me persevere as I wrestled with my tire! I got my tire on the rim using your technique -- plus vice grips to hold one end down. You rock!

I think I enjoyed your commentary as much as the instructions. Thanks for video and the humor

Back tires on a mower - 24X9.50-12. Couldn't have done it without your video, but hope to never have to do it again. I swear I could hear that Rocky song when the last tire went over the rim. Thank you for this superb instructional and entertaining video.

Love your dry humour! Excellent.

Good Video Roy, I have a smaller " Big Green " myself, and she needs new tires for this mowing season. I do all my repair work on my mower , including replacing a burnt valve in the head and replacing the shifter in the gearbox. I love doing my own repairs, and greatly appreciate other folks who do the same. Good job and Thanks for doing this .

I appreciate you’re work and time In putting these videos out. I have a BX (first “tractor”) but I still enjoy you and your “green” tractor videos. 😀

Video ending with beautiful country music !!!... Good job country man !!!

Thank you for the instruction and the pep talk about getting things done independently. I appreciate you.

Great video, was able to change my old Murray tires with a new set of mud tires. You and your music helped me get it done.. Great job..

I'm fixing a flat on my 13-year-old 'little red' garden tractor right now. I've ordered an inner tube and have been working on getting the old tube out of there. Tubeless, but it is the same rear tire that flattened years ago and I took it to a shop in the next town to fix. I know from the lower cost they charged me that they put in a cheap tube that leaked at the base of the valve a few years later. Broke the bead by standing on the rim and moving a foot, and then both, off the rim to the edge and bounced. Tomorrow I'll soap it up and work on getting the rim loose. It was a pleasure seeing someone finally looking after their equipment and tools. I've watched too many of these videos where equipment and tools were so rusty it was painful to watch. I'm in my 70s, on my own, and inherited my Dad's workshop and tools, so will do it myself this time; it will just take me longer. Have repaired my own appliances for years because of my remote location and figured out the experts were just guessing their way through the repairs. I found I can do that too. Thanks for the help.

Dude, thumbs up on this video. It was informative, and the commentary had me cracking up! Thank you!

I've never seen the bucket maneuver, genius!

Great video saved me much frustration. Worked well on my atv tires which are a pain to break and reseal the beads.This really helped.

Lol this is the best vid I’ve seen on KZfaq on how to change a tire for lawn tractor , I’ve got a Husqvarna 54” garden tractor I’ve got to change the front tires on it, I’ve got also a 54” John Deere garden tractor that I love! Thank for making the vid fun and understandable!

Outstanding music choice. Thanks for the helpful video!

Hahha! Dadgummut. That was the best narrator and music to go with a tire change.

Great video! Best one I’ve see so far! The 5 gallon bucket & blocks are a great idea for supporting the rim. Sparked an idea for building a similar mount that’s stable… thx! I need to swap my tires in the spring.

i didn't think I'd be entertained while watching a tire changing video. Thanks for the information and the laugh.

This was fun to watch and you made me smile more than once!

The smaller tires are a bear. I have 15" rims on my LX277 and had a heck of a time putting on new front tires. I finally did it, but it wasn't easy. I also installed tubes in them because I'm tired of Chinese tires leaking (and dry rotting for that matter). And I learned something, too. I knew that there was a town in Pa., named Carlisle. I didn't realize it was now located in China. Thanks for the video!

You have the perfect voice to narrate a Disney movie!💚

Great video ! The 5 gallon bucket really helps

Great video. I remember once I was trying to get my tire back on the rim after installing a new inner tube. Boy that tire whipped my butt. I was in the garage sweating. Finally gave up and took it too a buddy of mine. But I think I can get it.

Love your channel. thank you for the video

Thanks for the video! You just saved me some money! After watching your video I went out and did a larger tractor tire and it didn’t take me all blooming day like it normally does. Thank you! Great tips!

Very well done!

Thanks!! Nice video - informative and entertaining too :)

thanks for posting about tire changing it was very helpful i was looking for a good video about this for my lawn tractor thanks royrector

Excellent information on mower/ATV tire change...take care Roy Rector

Enjoyed video. Your sense of humor helps. Don't even have a tractor, or even a lawn.

you know there is a real nice tire changing machine at harbor freight for

Good video. I changed the front tires on my mower. It was a bit of a struggle but I didnt have a tire tool. I will take the back tires to a tire shop. I can have them mounted for less than the price of a tire tool. Thank you.

Excellently done... Thanks, jd

Thanks, this will help getting my 24x12-12 Ag tires on my Deere

Excellent video! The 5 gal bucket was too large for Lawnmower tires so I used a piece of 6x6. Fix a flat has caused the rims to rust excessively, so I had to sand and paint them to stop the rust!

I love it, Im not the only one using a classic torque wrench!!!!!

Thanks... that was a lot more help than the other two vids I watched ;))

Funniest tire changing video ever. Thanks for the knowledge, I'm ready to tackle my own AG tire install rather that going down to the tire shop.

Nice hat! I get a free one each time I buy a commercial mower. I'm up to 4 now. Thank you for sharing!!!

I love the way you talk LOL not in a weird way just I think it's kind of cool

Thank you very helpful!

Thank you so much for this video! I couldn’t figure out how to put the c clamp on, thanks so much

Great information. Really fun too.

Awesome tire video ever

Real nice video. Thanks!

Hello you good people over there, it was a wery good video thanks.. henrik , denmark

Great help. Thank you.

Very good video. For old tractors (or northern vehicles in general) I use a sealant on the tire face where it contacts the rim. Remove rust and paint that surface if it is rusty. Hi tack works good to seal the tire,but there are products just for that.

Good job over all ... special note however ... all four of your tires have "directional" tread and must be installed on the rim correctly for the position each tire will occupy...the best way to insure a proper install is to mark each tire with a chaulk arrow in advance indicating rotation direction and location on the vehicle...cheers and nice machine...JOHN DEERE RULES!!!

Love your intro, great job

Awesome video!!

Thanks for the tutorial, it was fun!

love the accent!! Thanks for the vid!

thx sir !!i got lots of help from you video ,thx very much !!!!!!!!!!!!!

Informative and hysterical.

Use a bead lock OTC 5733or OTC 5731 to hold the top bead. There rubber on the tool when you clamp the tool to the wheel. Nice video. Take your time like this man it will all work out fine!!!

Lol perfect choice of music 👌

Nicely done. :)

Hi I got a John Deere L100 wanting to put on Ag tires, my size are 20x 8.00-8 but can't find that size, my buddy told me a 20x 10.0-8 will work wanted to check with you lol and your videos are really helpful

Not thinking I started using my mower without checking the tires. Broke the bead and lost all the air. Was going to buy a new pre-mounted. Watch the video And re mounted it inless time then it would have taken me to drive to the store. You saved me 40 bucks and about 45 min.

Good video. It takes some tenacity but the job gets done. You installed directional tires and got them right as far as I could see but it is worth mentioning to be sure you are putting them on the right way before you go through the wrestling match. I prefer to wear gloves doing this job but I have thin skin on my hands at my age.

You’re a genius

Thanks, man!

Was watching this for the back tires of a quad. I swear, it wasn't the instruction tht got mine on, it was the Rocky theme!

anybody told you to use a vise grip on the rim for the hard to get on bead. Stops the rubber from escaping on the second rim bead.

i wish breaking the bead was that easy :) "where there is a wheel there is a way " LOL

I love the beginning 😂

Great video

The greatest KISS method I've seen in a long time..

Hey Roy great videos. I just got a 2013 JD x738 4x4 love it. Wish I had more attachments like you. What size and brand tires front and rear did you put on?

Thanks for the video. It helped me a lot. As a side note, if you don’t do a cover/parody of Alice’s Restaurant you are severely ignoring a gift. Hahaha. Sound just like Arlo Guthrie when you’re talking. Haha

kickass video

baby bites when spooning on tires, thats and old mans secret that retired after years of experience from working on small garden tractor tires to scraper tires. vise grips will also help from having the tire spin around the rim when its slippery

Those were some pretty rims. "Were."

Well I thought that was quite entertaining, I had to watch the whole thing, yikes watch out for the flying tire iron.......good stuff.

Thanks man

pretty nice tires there, wonder if one like that would fit on my 1997 John Deere 325 that i got for $150 with a bad motor in it that knocks. plan on overhauling the motor, but those rims there look just like the ones on my 325...wonder if that kind of tire would work on mine?

Vice Grips work well when putting the top bead on...clamp them to the wheel and they will hold the tire from coming back off

You need to make more videos! :) This was a sweet vid though!

Good transition at 5:50 :)

Nice video there, I would recomment of using two tyrebars next time, That screwdriver is dangerous

Good instruction and down home music

Are you the guy that does the Motel 8 commercials? We'll leave the light on for you!

Get a Ken bead holder .Good vid.

NICE TIRES ....RETIRED LARRY

It is just water and liquid dish washing soap, like you use when you hand wash the dishes. I just filled a regular cup about half full of water, gave it a good squirt of soap and stirred it up.

Actually, the ride is not bad at all. I originally thought it would be a little rough, but I really can't tell much difference in the ride, but a big big difference in traction, especially for the front end loader.

you can use the rim itself to take the back bead off.just take the tire tool and put it between the bead and the rim and push up.

❤

Excellent, I enjoyed you and your explanation... I have a question??? What editing program did you use to create this video?

Here is a tip you can take the tires off and back on the rims without taking the wheels off the tractor a lot easier. The wheels still on tractor are held steady just pry off tire and back on

Hey Roy, now that you have had the bar tires on for awhile what do you think of them? Do you like them better then the ones you had on before? I'm in hilly land and not sure if I should get the ones you had that you replaced with the bar tires or the bar tires for my 1026R JD. Have the R-4's on which is what it came with and I don't like them for the ground I have, it's hilly here in north east Tn. Let me know would you? Levi...

would i be able to ask were you got these tires from, what the exact make of them is and if its ok how much it was for the set of four.....im looking to put ags on my JD x500 garden tractor

Great video, I have my new rear tires and wanted to see how difficult this could be. My question is, once you get the new tire on the rim, how do you get the bead sealed enough to fill the tire with air? I can figure out how to seat it so it will fill...

good job. suggest buying another tire tool for $20 at tractor supply. What was the torque amount you used per your tractor?

Great video.....But has anyone ever told you that you sound exactly like Arlo Guthrie? Play "Alice's Restaurant." I'm not kidding.....

Tire bead poppin' police.... :)

lol he cracks me up

@stydell311 Its gonna fly now How does it ride with those tires? I'm considering them for my 317