www.joyoaudio.com / joyotech Product Reviews by Kyle Ragan @docwho7 on Twitter Member of the band Screams And Whispers www.reverbnation.com/screamsandwhispers Look us up on facebook or @sandwband on Twitter
Пікірлер: 69
@glendoggett96708 ай бұрын
You could use matching color dot stickers on a pedal and in the loop. Nice review and good explanation. Very convenient to be able to hit one button to turn on/off multiple pedals at once.
@fabou138 жыл бұрын
just got the same. Thanks for your advise
@mojorisen748 жыл бұрын
Just got it, super easy to program!
@uptownphotography Жыл бұрын
Nice video and informative... Well done. Phil NYC / Jersey Shore Area
@MikkoTolonen7 жыл бұрын
Any idea what is the signal path on that? from 1 to 8? So if I want a setting where OD is to be before delay, I should put my OD on loop#1 and delay on one of the later loops 2-8 ?. Or is it like that effect comes first that you choose first when programming ?
@DannyBoneZz6 жыл бұрын
Very informative, thank you!
@AllThingsWeatherly6 жыл бұрын
That's the goal! Glad you subscribed! Welcome!
@justinpalmer60982 жыл бұрын
Hi! Sorry, I know this is an old video. It looks like you have more than 8 pedals on your board. Do you have multiple pedals in any of the loops or are some pedals running outside of the switcher?
@Vin123manАй бұрын
Thanks for the video. When in bypass is it the same as going clean through the amp.
@follydentoom17217 жыл бұрын
Can you also have 8 loops in front of the amp?
@shyamseepersad75996 жыл бұрын
Hey man. So I've only recently started learning avoid effects and pedal boards and now have a small-ish board of my own (6 pedals). I also do back UK vocals for my band and the whole tap dance routine I have as well. My question is this, my amp has a looper to the back but I run all my effects from guitar=>pedal chain=>loop return (bypassing the pre-amp). Where in the chain would you recommend this unit being placed?
@AllThingsWeatherly6 жыл бұрын
You can use it in that manner. Personally I like gain pedals in front of the amp and modulation in the loop
@jebstv48356 жыл бұрын
can i tweak the knobs on each pedal. and change it i the other bank?
@Waxycarunkle8 жыл бұрын
Great video. Question: does it affect tone at all? Would you recommend a buffer before or after?
I have the ends of those cables you used to wire the board together but dont know how to attach the actual cable to them, anyone have a link for a tutorial like that?
@Vin123manАй бұрын
Another question. I stack a clean boost before an overdrive- will the pxl8 allow for that when I set it up
@dratband8 жыл бұрын
I used a label maker to mark what each loops pedal was.
@mattgilbert73472 жыл бұрын
How many loops per patch can you have? How many patches total?
@ILoveTheShakers7 жыл бұрын
how long have you had this unit? I've read reviews that these units can freeze on stage/crash... any experience with that? Do you tour with it?
@ILoveTheShakers7 жыл бұрын
also if you have a delay unit in a loop, when you change the preset to one without the delay, does the delay cut hard or do the trails fade out?
@notcampbell7480 Жыл бұрын
Hi, great video! I'm wondering if it's possible to turn on individual pedals using their own foot switch despite them still being connected to the switcher. For example like how you have the phaser, I'm wondering if you can use still turn it on and off with its foot switch even though it is connected to the switcher and get the phase sound. Thanks
@diegocastanedafiestas1574 Жыл бұрын
...
@Linux4UnMe5 жыл бұрын
Oh crap... I bought one after watching your video... but I have a problem. I need to put my modulation pedals AFTER the amp... I usually SEND from the amp fx loop into modulations then return to the back of the amp's fx return loop. Can't get it to work so far with this... hmmmm... any ideas?
@Linux4UnMe5 жыл бұрын
@UC14DlmB3lFoDSMwACOpKXcg Nar I had to upgrade to the pxl live version... Got midi too.
@leonardofogo7 жыл бұрын
Hi Man, I have a CRAZY question!?!?!?!? I have an amp with a FX loop at the back, and Id like to use the PXL8 to control my pedals going in the input of the amp as well as on the FX loop. My idea is to use one of the JOYOs loops for the preamp of my amp. Id like to use/sacrifice “LOOP 5” on the joyo as such; JOYO SEND in the Amp INPUT, and the FX SEND from my amp in the JOYO RETURN. Id keep loop 5 ON my Joyo on at all times. And the output of the JOYO would go to the FX Return of my amp. Is that gonna work or I’m missing something very obvious?
@AllThingsWeatherly6 жыл бұрын
Sounds like it could work. Pretty smart idea!
@timothykim856 Жыл бұрын
Can I use two joyos with 16 pedals, then connect the two joyo's together?
@charlesstevens4056 жыл бұрын
Do you buy your pedals at Dollar General or something?
@kentwyngaard88033 жыл бұрын
Hey man, I know this is 5 years later but which patch cables were you using in this video with the looper? I see its pancake type style. Lots of people claim that the pancake style won't fit next to each other. But you've managed to do it. Please let me know what cables you are using. Thanks!
@AllThingsWeatherly3 жыл бұрын
Those were all made by me. i just ordered the connectors from amazon.
@kentwyngaard88033 жыл бұрын
@@AllThingsWeatherly thanks for the quick response. Do you still use the PXL unit after 5 years?
@AllThingsWeatherly3 жыл бұрын
@@kentwyngaard8803 i do not. Primarily because i switched over to a headrush rig for live use.
@kentwyngaard88033 жыл бұрын
@@AllThingsWeatherly ah okay I see. Were there any problems with the unit up until you made the change to the Headrush? Clicks, pops etc?
@jarynzr8 жыл бұрын
hi nice tutorial, but can you program to interchange the pedal? example if you want a preset of a pedal A > B, and another preset going to pedal B > A
@jarynzr8 жыл бұрын
Thanks so much for your answer!
@MidAgeGuitar7 жыл бұрын
You reviewed Buzz Electronics looper too.. which one is best? This or buzz? Thanks.
@MidAgeGuitar7 жыл бұрын
Thanks for the reply.. I need banks but the thing I like about the buzz.. it's built like a tank and looks good. I looked on the website and it said it has banks? But there is no display so I don't know how you would know what bank you're on ?
@iplayloud26 жыл бұрын
Would be crucial to know if it's buffered or true bypass.
@FretFriendGWaL2 жыл бұрын
Each loop is true bypass...
@mattgilbert73472 жыл бұрын
Is there an input or output buffer?
@DusterBuglas7 жыл бұрын
Can you program it to switch between your amps channels? Would love to not have to use my amps footswitch when switching from clean to distortion.
@TomMcCormickGuitar7 жыл бұрын
Check out their pxl pro model. It has triggers for amp switching capabilities!
@DreidMusicalX5 жыл бұрын
I have a question. How does this hook up actually? I mean I run certain effects thru the front of my amp and distortions thru my effects loop. How does this hook up to keep that configuration?
@kentwyngaard88034 жыл бұрын
You will need to buy the PXL Pro to have the time based effects run through your FX loop
@sebastianeriksen61183 жыл бұрын
Or you could put the amps preamp through one of the loops
@AlessioMartorelli886 жыл бұрын
Hey! What cables are you using to connect the pedals to the looper? I think I had a look at those flat-head patch cables and I was sure they wouldn't fit next to each other on the PXL8. Thanks!
@AlessioMartorelli886 жыл бұрын
Not listed there right now but thanks for the info. Just so that everyone else interested can reach the link, it's mispelled: premiumaudiocables.com is the right one! Cheers
@kentwyngaard88033 жыл бұрын
@@AlessioMartorelli88 Thanks. I had this same question
@bmmer0077 жыл бұрын
Hi. Wondering how do you use the other pedals on your board if you can connect only 8 of them? Can you still use them? Also, this is a great pedal board, what brand is it please? Thanks for the review and tips!
@jdiggitty7 жыл бұрын
You can connect multiple pedals within a loop. For instance, say loop 2 has all your different distortion/fuzz pedals in it. Loop 3 all chorus and delay. At 7:02 you can see his whole pedal board. All the pedals with the same color sticker are in the same loop. (unless I completely misunderstand what he's saying) The video here is a bit confusing and he over-simplifies things. You still would have to select the individual pedal you want/don't want within the loop. These are the boards I use. All zip tied. www.chemistrydesignwerks.com/holeyboards/copy-of-holeyboard-next-series
@Connor_Bowles6 жыл бұрын
Does it matter which pedals go in which inputs also how would i go about use a tuning pedal with it
@AllThingsWeatherly6 жыл бұрын
No
@wasdwasd123213 жыл бұрын
Getting noise from loops that are deselected, ie my drum pedal can be heard at a lower volume even though I'm bypassing that loop. Wtf.
@SixStringVillain6 жыл бұрын
Can you control pedals both in the front of the amp and in the fx loop at the same time ?
@AllThingsWeatherly6 жыл бұрын
No
@mortenagerlinpetersen18555 жыл бұрын
Yes, at least on the pro version the 8 send/returns are split in two groups so you can wire one group in front of the amp and the other in the effects loop
@TheReclus3 Жыл бұрын
I would be grateful if someone could help me how to connect my Joyo Preamp House with Joyo PXL 8, thank you!
@BluesLicks1016 жыл бұрын
Its not a looper. That is a misnomer: A looper is a audio repetition system, such as the Boomerang, or JamMan.
@Boujonzu4 жыл бұрын
A true bypass looper is completely different to an audio loop pedal
@justinsane25256 жыл бұрын
exuse me... it's possible to program a preset with 5 or 6 pedal contemporany? or the limit is 4? RISPONDI