the signal path runs from right to left in the looper, so just wire your pedals in the correct order, rightmost pedal first, leftmost last.

5 years after, can you finally do that or not?

Bigswampbushcraft I too want to know this

Interested if indeed these are different companies or repacking of guts by same company and rebranding for different markets. I think all of these are the same company: Mosky, Nux, Joyo, Tom'sLine, Donner to name a few.

Lindsay Telman Hey Lindsay, the PXLs can't do stereo, but the MOEN switchers, GEC9 and GEC 8 Live have the last too in Stereo, but that only gives you one stereo loop. The new Boos Looper has the last TWO loops stereo, but it is also 700 dollars!

@@EytschPi42 I've been thinking about the same question. Would it not be possible to send Loop 1 to the left amp and Loop 2 to the right amp? Further, would it also not be possible to split your stereo device into channel 4 on loop 1 and channel 8 on loop 2 and thus get a stereo output?

yes

could you solve it?

@@leonemesis87I would like to know too. Why do people ask questions then never communicate their solution. Ugh. Did you figure it out?

@@iRemainNameless I never solved the problem, sorry. It happened once and then, totally random. Then I got tired, sold the unit and most of my FX pedals, and bought a Quad Cortex.

I don't hear any pops... it depends on the pedal... if the pedal pops when you engage it, the looper can't fix that... but I don#t see a problem there because you usually also play right when you switch and the guitar sound is masking the pop.

right

It is hard to know without knowing how you get your pedals setted. You could use it in a loop after a noisy overdrive (you can put more than 1 pedal per loop). You could also use a dedicated loop and activate it only when playing with gain by putting it in the post preamp loop. There are also super gain settings with multiple gates possible.

Justin Lanyon-Olver It should work with the blues deluxe... how many switching functions does it have?

EytschPi42 It has two switches, reverb and channel switch. But the normal cable for the footswitch is a mono cable....and there are lights on it so it must send power down the mono jack somehow. Ive tried using an insert cable with no luck, it either changes just reverb or just the channel depending on where I put left and right.....

??

I had a problem with the switcher on a monojack 1/4" control for a Fender Super Sonic. Turns out it wasn't a simple "make-it/break-it" switch. The switch had different resistors at each switch, and the amp reacted different to the different resistance levels and knew by that when to switch whatever off and on. It was a pain to fix, but that also means it wouldn't work with this type of switcher, at least not directly. You could build a box with those values of resistor in it and basically translate the action of the foot switch....or replace the footswitches on your Fender switch with 1/4" jacks and run a cable to each position. Ugly I know.

No, you don't have to have an FX loop... the PRO and LIVE can take advantage of that, but you can also put all the pedals in front of the amp, no problem !

EytschPi42 so without the looper, and i place my pedals in line from Guitar -> Comps -> OD -> Revb -> Del -> Amp then by placing them in same order but WITH the looper pedal/rail i effectively am creating a Loop in Series? do i have this right?? Thanks!

nmssis I don't know what you mean by A LOOP IN SERIES... you are just putting each peal in a lop to have individual access to it... they are still in front of you r amp, nothing really changed, it is just a better signal and more convenient... I would also put the reverb last, behind the delay !

EytschPi42 Crappers! You just clarified everything for me. Thank You!! subscribed!

You can't order them, you actually have to make them yourselves... with standard 1/4" and DIN plugs...

EytschPi42 So... where do you get the copper and the rubber for making the cables, and the metal for plugs, and the molding forms for the plugs? Do you have your own foundry?

EytschPi42 What I asked the first time, is where order the stuff for making your own cables ;)

Jon Iver Eira Tellefsen you are funny.... all I meant was that I solder them and therefore "make my own cables". Here are the links to the materials: Cable - Sommer BLACK ZILK www.thomann.de/de/sommer_cable_the_spirit_black_zilk.htm Plugs: www.thomann.de/de/hicon_flunderklinkenstecker_winkel.htm www.thomann.de/de/neutrik_nys_201.htm www.thomann.de/de/neutrik_np_2cm_b.htm

EytschPi42 Learned being funny from you :) But off course, Thomann. Where else??? :) Thanks! I´m still a Thomann-virgin, but thinking of popping the cherry pretty soon. Gonna buy the red Harley Benton-amp, and the acoustic you tested with your friend :)

Same one

Try www.tonfan.de or Amazon

EytschPi42 I will do that. :) Henning, one question: The blue Tele in the background looks really great, what model is that?,Could you play that guitar in one of your next videos? That would be cool. ;)

Dan Decker Hey Dan... that is a Yamaha Tele, but sadly, it doesn't sound very much like a Tele and I was kinda disappointed with it... I can play it, but it is not the kind of quality guitar I would want to use to feature any kind of pedal.

EytschPi42 Ah ok, i understand, thats a good reason, so stick with the guitars you like. Sound > than the look of a guitar. :)

Laut Joyo wird es schon ausgeliefert. Musst ein bisschen rumforschen wer es hat, oder bei Joyo per Email fragen.

EytschPi42 hast du ne Anleitung? für pxl live?

einhong Jap, hab ich... muss noch durchsteigen, aber alles wie PXL Pro plus die MIDI section.

+Harsh Agarwal yes, you can.... you can put several drives in there for example and then chose which drive you want to use for one of your presets... or groups that are always on together.... anything goes...

+EytschPi42 thanks a lot sir

cristian albarracin Well, I don't speak spanish, so, sadly, no, I can't do that.

@@EytschPi42 Actually if you just type out your English or German dialog then KZfaq could do the translation automatically into whatever language fairly accurately. Less accurate if it has to guess what you just said, so that is why it is useful to supply KZfaq with a script across the bottom.