Finally a how to that doesn't blow up my house I'm already on my 3rd home

1 year ago a man put out a simple yet informative video for those who wanted to complete a simple yet daunting task. As of today I too have completed this task with the confidence that I will not blow my house up. Thanks for a clean and to the point video.

FYI for those finding this now, you DO NOT use pipe dope on a flare fitting. It can interfere with the fitting seating properly and actually cause a leak. I can see in this video he did use it on that fitting as well but didn't mention it. Don't use it, its designed to be used without tape or dope.

Thank you! This fully explains why Lowes wanted $354 to do this job and why I can't justify spending over half again as much as the range for this simple procedure.

Bought my parents a new stove and I had to install it myself. Well this video made it easy peasy. Wouldn't have figured out the adapter situation had I not watched this. Thank you!!!

Just a note there are three types of adapters in different sizes that allow you to connect your gas line to stove/oven. For example, the newer yellow gas line has its own adapter it comes with BUT you need to change your gas line stem/cap- it will not connect . The old silver gas line as shown in the video has its own adapter which you can buy to attach your NEW stove. Go to your Home Depot and they will find the right piece it’s $5-6. So you don’t need to change your gas stem/switch line.

And thats how you do a clean no non-sense, to the point how to do video.

Thank you and every awesome person like you that posts "Howto" videos that help the rest of us. You people are truly great.

Thank you for this video. You just saved me $200. I going to watch your daughter cooking show. I love seeing the next generation. With new ideas

I have the same exact stove. The manufacturer says to place a wrench on the inlet nut on the other side of the regulator when tightening the supply line. This will ensure that there is no stress placed on the inlet valve. Just my 2 cents, but a very informative video.

That "egg in a hole" concoction your daughter was making we used to call "Egg in the nest" when we were young-uns.

An excellent 'how to ' video. My gas stove needed to be replaced. Had never done this before and the step by step directions were superb. Thank you.

Almost gave up finding a video I could actually follow and understand!! This was PERFECT!! As a single Mom, DIY is a must, but was scared out of my mind to deal with a gas line! This video kept things simple and calmed my nerves!! Thank you so much!!

There were many How-To’s but it was this one that fully illustrated the “not blowing up your house” point, and that’s why I watched.

Thanks, dude! We just moved into an apartment that had a neglectful occupant. There is a sketchy stove here, and the oven won't even turn on. I saw a nice unit, but I was a bit concerned about safety. This video has removed *layers* of concern! 💯

Great vid! Maybe also turn gas on and off after shutting gas on old stove to clear any residual gas and give urself peace of mind

Excellent! Concise and loved how you plugged your daughters cooking show...adorable

Thank you, do it yourself, dad. I'm putting in a new stoyesterday, and this is helping me tremendouslee. Keep doing what you're doing

that is amazing. I literally just got the same stove and have to hook it up. Glad I found this channel

Wife wants a new stove and we’re planning on buying. I’m paranoid cause I have no clue what I’m doing. This video was very very helpful and easy to follow. Thanks again !!

All the other videos I've seen on this made me think I should just pay someone the $300... but, after your video I will attempt the installation my self in my new construction home. Seems simple enough, really is plug and play.

Literally the title hooked me in immediately! 😂 that’s exactly what I want to do

Love the hand guide razorblade use. Classic dad DIY move.

Always put in new hose. Reason is they are compression fitting and one use only for safety critical applications. Reusing compression fittings is asking for trouble, whether it is gas line or water line. Hilarious that video title says how not to blow up the house Change the hose. It is better to be safe than sorry

Thread sealant is a great idea but do not use white Teflon tape for gas.....use the yellow Teflon made for gas.

Thank you for your great assistance video. Only issue was the gas piping adapter. Lowes only carried 1/2"-1/2" or 3/4"-3/4"; and, my existing line was 3/4" with the stove having a 1/2". needed a 3/4"-1/2" adapter. Before viewing your video, I tried to remove the adapter from my 18+ year old slide-in range and couldn't get it to budge. After viewing your video and finding the problem at Lowes, I returned home and tried to remove it again. Since the oven ignitor had outlived its life, I exerted enough pressure to get it off. Cleaned the adapter and reinstalled. Worked perfectly thanks to your video assistance.

Use a 2nd wrench to hold the flare fitting while you tighten the flex connector to keep it from spinning

You are very helpful and easy to follow your instructions. Thank you for your time and efforts and it’s appreciated.

Cool video was actually a little nervous about replacing my stove this weekend lol. Especially with the gas don't want to blow my house up thank you for the content . Have a good weekend and stay safe Jimmy from Massachusetts

THANK YOU FOR SHARING. MY HUSBAND JUST HAD A MELTDOWN BECAUSE THE STOVE DIDN'T LIGHT. I FIXED IT , OUR SECRET OK. LOL

Great job, father and daughter. Thanks for sharing.

Man is a legend. Now i dont have to worry about my house blowing up!👍👍

Thanks, I just got a new stove, and the gas line scares me. This helps me alot.

very simple video! getting nervous Best Buy will not be showing up to install our new range so prepping if I need to tell them to just drop it off and I'll handle the hook up!

I have the same old stove and bought the exact same new one. What a coincidence. And now I’m looking to see if I am brave enough to install 😂

You should have replaced the gas line because there is a compression fitting on the female connection to the stove. Once its been compressed (fitted to old stove) its now compromised. Just a safety thing for me. Otherwise, good video; spoke clearly, kept it simple and the video angles were good.

Very straight forward without the needless comedy or small talk. Good Job!

Im about to do this. Wish me luck!

Great video! Gonna install the exact same stove tomorrow, thanks for the video.

You made a mistake as careful as your were. After you shut off the gas line you need to open up the valve to the stove and let it spark and burn off and or let the gas escape from anything that's left in the line.

Thank you. That was very clear and simple. There were two steps that were implied, but not explicitly shown: attaching the hose to the adapter on the stove, and attaching it to the valve on the wall. It's not a big deal, but installing a gas line is a little anxiety producing, so the more steps shown the better.

Great video, and awesome getting the family involved.

Nice Job! But its Recommended that you use a new Flexible gas line!! your using your old gas line on your new Stove!! just a word of Caution!!

Thank you, you just saved me 150 bucks.

Thought you "had" to replace old flex line?

Thank you! You delivery was awesome!

Thank you! I'm installing one tomorrow by myself and this helped me so much!!!!

I thought I had to look this up lol this is easy as pie

Before u unbolt the gas, the gas must be purged, also must check if gas supply is halted. Do this by running one of the stove burners untill it flames out and wont restart

That’s how easy it is to do in every house 🏡 !! Woow never knew that

Subscribed dude, amazing narration, straight to the point.. Loved the video.

Super good video. This is the most thorough installation video I've seen

Thanks for the video bro! I bet I could do this myself but my wife won't let me. Now I have to pay someone $120 to install it and it looks so easy. Maybe I'm in the wrong line of work!

First time ever doing this thanks u made it simple

Thank you

Wish I would’ve seen this video before I blew up my house!

You are great at giving info to me and everybody else

Thank you very much. It is very easy to follow up. 😃

Nice job. I'll be doing the same thing tomorrow and this helped

Thanks 🎉

Thanks for this - clear, safe and easy to follow.

Thank you for this video! It was massively helpful.

Recommend putting in a new gas line when you replace the stove. It's inexpensive (about $35).

Thank you so much, you saved us £85!

Use 2 wrenches when tightening the gas line, one to tighten the flare fitting. And another for holding the gas valve so it doesint turn aswell.

Thank you soooo much!!! I just bought a stove and was about to install it❤

Hey Kaylee!!! I thought I was the ONLY one that knew the egg in the hole sandwich! 😛

Thought you’re not suppose to use the sealant on flared fittings?

Thank you for showing how to disconnect the gas connector from the stove....the second fitting is the one to remove. If tight hold the first fitting with channel locks steady while loosening the second fitting. 😊

Thanks, 👍

Thank youm always good to review before attempting to do this yourself

This is super helpful. Thank you

thank you sir

Simple video, helped me a bunch

Not to be a know it all but you are supposed to replace the flex line on any new appliance installation

Thanks!

Big thumbs up just because my alive and haven't exploded in my house! hahaha

Always a good idea to put the pipe dope on the fittings for gas lines.

1:05 great idea! 3:04 lots of great ideas thank you!

Thanks for sharing. Looks easier than I thought. I subscribed. ❤

Very good job. Awesome video

We just bought a stove and was told to always replace the gas line when you’re putting in a new stove

The se one you put the cushion on the feet of the stove I gained confidence in this video! Hahah

It’s recommended to use a new universal gas connector kit. I installed a new stove in my fiancée’s condo unit after watching this video

Thank you for this awesome video. Very helpful!

Thanks dad!

What about the residual gas in hose after closing valve? Where do I get the adapter? This video is awesome thank you

205 People blew up their house...

Overall a good how-to video. However, I would have replaced the old flexible line with a new flexible line...but I would have also made sure that the new line didn't get all twisted and kinked when I tightening the fitting. Also...since it was demonstrated using two wrenches to loosen the fittings when removing the old line...why weren't two wrenches used when attaching the new line?!? Personally this is more important because you don't want to put unnecessary torque on your new stove's regulator or other gas line parts. That's kind of inconsistent.

Good job!

Thank you, 👍🏿

I was riddled with anxiety wondering if you were gonna wipe the pipe dope off your finger.

Egg in a hole are good af. I remember the day my pops made it for me the first time.

Cool video. I already have a yellow gas line to hook up my new stove to, but I'm not sure if I'll need an adapter and I'd rather not buy a kit full of adapters as well as the gas line I already have. I'd prefer to buy just the adapter if it's available and I need it.

Should you also spray the pipe coming in from the wall, to check for leaks?

This video is very much appreciated. Thanks!

Love the wood floor!!! If you were my neighbor, I’d ask if you can help me install the stove lol

Thanks man

Do you put the T+2 pipe dope on the adapter you installed where it connects to the gas line? Do you put T+2 on the 1/4 turn gas shutoff where it connects to the flexible gas line? You did not show this in you video.

family all quit and tariffed bahaha classic dads