Door restoration. Adding Height to this Old Pine Door.

Рет қаралды 71,870

2 жыл бұрын

Thank you for joining me on this one, A similar video to the external door repair video here - • Rotten Door, Full Repa...
I am splicing the Stiles of this door and adding height to both Stiles and the bottom rail. Not as quick as screwing a piece of pine to the door bottom but a much better and correct way to do such a repair. While it may seem a costly thing to do, finding another matching door the right size would take an awful lot more time!
Here is a few links that may be of interest
Reasonable quality, reasonably priced multitool blades - amzn.to/3t5Z3Lg
PU Glue I used - Wurth - eshop.wurth.co.uk/Product-cat...
My personal Preference Pu Glue Woodweld - www.constructionchemicals.co....
BMI Panel Tape - amzn.to/35OARo6
If you’d like to support the channel so we can make more videos please consider becoming one of our Patrons or sending a one off donation Via PayPal
PayPal Donation - paypal.me/OliverBradshaw
Patreon is a simple way for people to support the channel with a minimal monthly subscription.
If you'd like to support us go to our Patreon page here - / bradshawjoinery
Or you can buy me a beer here - BuyMeACoffee.com/BRADSHAWJOINERY
Help support the channel when shopping on Amazon, if you click this link below before buying anything on amazon, I will receive a small percentage of the sale price. It will not cost you any more, so please help me out if you can.
UK: amazon.co.uk/?tag=bradshawjoi...
US: amazon.com/?tag=bradshawjoi0c-21
INSTAGRAM ► / bradshawjoinery
FACEBOOK ► / bradshawjoinery
WEBSITE ► BradshawJoinery.co.uk
qpwoeirutyghfjdkslazmxncnv90
#Joinery #Woodworking

Пікірлер: 222

@conscience-commenter 2 жыл бұрын

Thank you for taking the time with that undersized door . Most people would have chucked it . You properly restored it for many more years of use . It may look like an average pine door but is forever " The Bradshaw door ".

@BradshawJoinery 2 жыл бұрын

Thankyou, it certainly will be and hopefully live on for many years!

@woodpurposedmechanic8299 Жыл бұрын

I built three of these doors for my old house. When we sold it to flippers we asked it they would use them or throw them away. They let us take them rather than throw them away. I hope that someday someone takes as much care for my doors as you have for this one.

@BradshawJoinery Жыл бұрын

Nice one, What a shame. Im lucky to have clients that appreciate the beautiful things.

@royordway9157 2 жыл бұрын

That is some nice work. I'm a new subscriber from Bath, Maine, US. I have been doing carpentry for 47 years.I have done a few jobs like this but not many. You Sir are a real craftsman. I'm glad I stumbled across your channel.

@BradshawJoinery 2 жыл бұрын

Ive just visited Bath, but the Uk version haha. Thankyou for the Kind words!

@davidgroves7342 2 жыл бұрын

Love the Double Wadkin disclaimer 🤣 🤣 🤣 Amazing work as usual! Thanks for sharing 🙏

@BradshawJoinery 2 жыл бұрын

Haha! Not going to lie I'm in love 🤣🤣

@popcornlover948 10 ай бұрын

I could watch your stuff all day every day. Thank you for what you do.

@ianwatson9096 2 жыл бұрын

Thanks for another great lesson. Also, thanks for introducing me to PU glue in gun form. I've used bottles of PU before, but there are so many advantages to using it with a gun. I didn't even know it existed in that form until you showed us. Keep up the great videos.

@BradshawJoinery 2 жыл бұрын

Thankyou Ian, yes "what glue is that" seems to be a common question. I didn't realise it wasn't so well known, and now it's mentioned most seem to use the bottled version which is just the devil's own juice...

@normancoutts 2 жыл бұрын

I had no idea that work of this quality and requiring such skills still happened. Great to watch. All the very best to you.

@BradshawJoinery 2 жыл бұрын

Tha kyou Norman that's great to hear. All the best to you

@peetkoolstra3891 2 жыл бұрын

Great to see that there are still crafrsman how knows to do this kind of restore jobs. Unfortunatly there are less people with this gift and plesure in this work.

@BradshawJoinery 2 жыл бұрын

Thankyou, yes there are less trained people now, hardly any Proper joinery apprenticeships available or places making proper joinery/mastering the trade.

@stevefromlondon9175 2 жыл бұрын

As I said before so nice to see a skill still alive in our throw-away world Regards Steve UK London

@BradshawJoinery 2 жыл бұрын

Cheers Steve! Its not cheap which is why it is dying out i guess

@dougsaunders8109 2 жыл бұрын

Lovely job Ollie as always. Look on Otis face is the same as our dog gives when it is raining!

@BradshawJoinery 2 жыл бұрын

Cheers Doug, Yeah haha, hed sat there so long he didnt quite believe me when i said walkies

@realbartlett8882 Жыл бұрын

To oxidize that fresh wood you could try brushing on a potassium peregrinate solution. Should darken it enough to blend in.

@BradshawJoinery Жыл бұрын

Thanks matey, ill remeber that one

@WayneMacDonald1 2 жыл бұрын

Lovely fix! Thanks for explaining the reason for the beveled angle on the joint. Makes perfect sense but I'd not have thought of it.

@BradshawJoinery 2 жыл бұрын

Cheers Wayne! 👍

@leftwichprojects 2 жыл бұрын

Another great video Ollie, a lovely repair job on that door 👌

@BradshawJoinery 2 жыл бұрын

Thankyou Jason 👌👍

@montedaestrada3563 2 жыл бұрын

Love your restoration projects.

@BradshawJoinery 2 жыл бұрын

Thankyou, they do seem to be very popular 🙌

@andreacordonier9257 Жыл бұрын

I have eight doors of a similar vintage to extend, so this was fantastic! I'm a little light on the Festool gear I'm going to have to beg/borrow/steal from friends and work my Fein.Thanks tons, Andrea

@BradshawJoinery Жыл бұрын

THankyou Andrea, thats brilliant to hear.

@gordonagent7037 2 жыл бұрын

I’m slowly working through your playlist and as with this post, your work is incredibly well done to a very high standard, which is an absolute credit to you as a tradie who takes pride in his craft and to the satisfaction of the clients expectation. Thanks for all the tips along the way. Take care

@BradshawJoinery 2 жыл бұрын

Thankyou Gordon, good to hear, I try my best! Thankyou for the kind words

@lisacole690 Ай бұрын

Beautiful work 😮

@alberttibbets6567 2 жыл бұрын

It came out so nicely. Thanks.

@BradshawJoinery 2 жыл бұрын

Cheers Albert!

@MHTutorials3D 2 жыл бұрын

Great video as always

@BradshawJoinery 2 жыл бұрын

Cheers Mike 🙌

@tonyworkswood 2 жыл бұрын

Great job Ollie enjoyed watching. It's good to see alternative methods not seen before. Tony

@BradshawJoinery 2 жыл бұрын

Cheers Tony! 👍

@yt66228 2 жыл бұрын

Amazing beautiful work! A true craftsman!

@BradshawJoinery 2 жыл бұрын

Thankyou so much Paul 👍

@1myfriendjohn 2 жыл бұрын

Beatiful work as always man.

@BradshawJoinery 2 жыл бұрын

Thanks matey 🙌👍

@2255buck 2 жыл бұрын

Beautiful work !

@BradshawJoinery 2 жыл бұрын

Thankyou Joe

@jimbartley9125 2 жыл бұрын

Very nice to see a quality repair. The door will be good for the next hundred years. Well done. Very informative.

@BradshawJoinery 2 жыл бұрын

Cheers Jim, hopefully! It will make a nice piece

@bobbg9041 Жыл бұрын

I love it he owns a track saw usescit, radial arm saw uses it, really nice panel saw and uses it. Do you know how many shops don't use the panel saw anymore or refuse to use a radial arm saw in the USA. Id use all of them tools and a cnc mill if I had it. You've got a nice shop and looks like doors are your thing. Becuse you've got the tools do make short work of it and do a really good job.

@BradshawJoinery Жыл бұрын

Haha no point owning a tool and it not get used! I literally do all sorts, Generally limited by my shop size or if i can handle it on my own lol! Thanks for watching

@wallybeep Жыл бұрын

I loved this. I am in the States and often travel in the UK. You DO have many shorter doors there. As it happens, a prior owner shortened 8 doors here at my house of comparable vintage. A shame, but I need to correct now that her carpet has been removed. This has been very helpful . Great job, sir!.

@BradshawJoinery Жыл бұрын

A Normal door is 1981mm but many older houses have been reworked etc and doors get trimmed down... very old cottages the doors are really low!

@markfiges999 2 жыл бұрын

A nice bit of PROPER woodwork.

@BradshawJoinery 2 жыл бұрын

Cheers Mark! 👌

@raydriver7300 2 жыл бұрын

I’ve just found you and already I am a fan. It’s so nice to meet a Brit who makes housing joints and not rabbits. I’m so jealous of your Festool kit. Great job 🌞

@BradshawJoinery 2 жыл бұрын

Cheers Ray. Your subscriber 30001 👍😎

@raydriver7300 2 жыл бұрын

On the way to 40,000. Best wishes 🌞

@michaelplays2449 2 жыл бұрын

Great video, very enjoyable thank you !!!!

@BradshawJoinery 2 жыл бұрын

Cheers Michael

@TheNorthernmunky 2 жыл бұрын

Awesome as always pal!! Keep em coming - Logan

@BradshawJoinery 2 жыл бұрын

Cheers Logan!

@benjaqsonworkshop9974 2 жыл бұрын

Great to see how you use even the simplest of jigs and guides to create a perfect looking joint. Thank you.

@BradshawJoinery 2 жыл бұрын

Cheers Ben!

@122MLJ 10 ай бұрын

Amazing talent 😮

@dyoooooooooon 2 жыл бұрын

What a fantastic video. Both informational and entertaining.

@BradshawJoinery 2 жыл бұрын

Thankyou Very much!

@lesterdewey7644 2 жыл бұрын

Great explanation with lovely workmanship Thanks Ollie

@BradshawJoinery 2 жыл бұрын

Cheers for that Lester

@martinbrice9802 2 жыл бұрын

Mate that’s a quality repair love watching your work thanks for posting 👍🏽 so nice to see old doors being restored and used again. 😄

@BradshawJoinery 2 жыл бұрын

Thankyou Martin! Appreciate it. I love keeping things alive too!

@montewoods4766 2 жыл бұрын

Very nice workmanship!

@BradshawJoinery 2 жыл бұрын

Cheers Monte

@Cradley684 2 жыл бұрын

Another great job, great restoration, have a nice day !!!.

@BradshawJoinery 2 жыл бұрын

Thankyou very Much Brian! Appreciate the support :)

@michaelchapman4269 Жыл бұрын

I’d rather have a door like that than a new one! Beautiful work as always

@BradshawJoinery Жыл бұрын

Cheers Michael. Yeah i love the old pine doors too.

@Sibbe2560 2 жыл бұрын

Skills all over the place. Love watching this…👍👍

@BradshawJoinery 2 жыл бұрын

Cheers matey

@liambrophy7574 2 жыл бұрын

Lovely job the dog part was brilliant

@BradshawJoinery 2 жыл бұрын

Thankyou Liam! Haha it was about 8pm 🤣

@markrussell9719 2 жыл бұрын

Great job Ollie - Otis is cute.

@BradshawJoinery 2 жыл бұрын

Cheers Mark! Too cute, gets away with all sorts

@sheepskullcaver 2 жыл бұрын

Fantastic job proper craftsman

@BradshawJoinery 2 жыл бұрын

Cheers for that 🙌👍

@lissataylor12345 2 жыл бұрын

Beautiful!

@BradshawJoinery 2 жыл бұрын

Thankyou Lisa! :)

@evedickson2496 2 жыл бұрын

Great video, and the "Hot Fuzz" reference was the icing on the cake 😁😁

@BradshawJoinery 2 жыл бұрын

Haha Thanks Eve, glad you enjoyed!

@HSkraekelig 2 жыл бұрын

Brilliant repair. I'm inspired to use my new multitool in ways I would not have thought of before. Thanks!

@BradshawJoinery 2 жыл бұрын

Cheers matey, yes its a great tool!

@carllamb6711 2 жыл бұрын

Perfection at its best I could watch you all day iv learnt so much from your videos thank you 👍👍👍👍

@BradshawJoinery 2 жыл бұрын

Thankyou Carl 💪🙌

@neilw4881 2 жыл бұрын

We are running out of superlatives for you Sir! Class 👍

@BradshawJoinery 2 жыл бұрын

Haha 🤣 seem to be getting some good feedback. Cannot thank you enough

@joshscunthorpejoinery Жыл бұрын

Would be fantastic to workalong side some one like yourself, I would learn so much, its another side to.joinery I never get involved in, regretfully realy inspiring.👍 top work as allways.

@BradshawJoinery Жыл бұрын

Cheers Josh, Trouble is there is such a broad spectrum of work, its a good 5-7 years of experience before you get to grips with it all, then you can start mastering it.

@paultay23 2 жыл бұрын

I say this every Video Ollie...masterclass again...I might even get the opportunity to put this into action one day...Cheers Paul

@BradshawJoinery 2 жыл бұрын

Haha thankyou for the support Paul! 👌 Hopefully it goes well if you do, it's not all that difficult tbh!

@baloo021063 2 жыл бұрын

brings back memories👍👍.jobs like this was what I served my time on, not to forget the best window ever designed the sash n case window, long as the painter didn't paint them shut tho lol, another great video fella cheers Ross

@BradshawJoinery 2 жыл бұрын

Yes I have a few sash windows at my parents to repair. I made the sashes about 4 years ago 😂 still not got there

@2373stevieb 2 жыл бұрын

Easy with the “walkies” Mr Bradshaw please. My Lab thought he was of for a trot around the block at 2:30 this morning when he heard that word mentioned Lol. Great job as always.

@BradshawJoinery 2 жыл бұрын

Hahaha brilliant. That made me chuckle!

@dsdragoon Жыл бұрын

I like the way you modified the door.

@BradshawJoinery Жыл бұрын

thanks±!

@user-fq4qk9wz5k 6 ай бұрын

Great work as usual giving a new lease of life to a classic old panelled pine door u give us lots of tips so it seems fair to reciprocate. To help blend the colourisation of the new pine to the old u can use of all things a tea bag ( I’ve done it many times ) not a soaking wet one a damp one will do it might raise the grain slightly but u can sand it back and u really do have control over the tone with a humble old tea bag not to mention the cuppa whilst working or of course there is the alternative u could call in a french polisher but then the expense creeps up

@handyjim 2 жыл бұрын

excellent job

@BradshawJoinery 2 жыл бұрын

Thanks Jim

@rick91443 2 жыл бұрын

Beautiful work, as usual...cheers...rr Normandy, Fra.

@BradshawJoinery 2 жыл бұрын

Thankyou Richard :)

@cliveclapham6451 2 жыл бұрын

Ottis 😱🎯 the shop dog 👍👍👍 nice job l like to see old stuff repaired and re-purposced give meaning an value in this throw away world. 👍👍👍

@BradshawJoinery 2 жыл бұрын

Abso friggin lutley! I say the story of a joiner who's repaired and cared for that old door is worth more than the same time spent making a new one... Imo. It's the story that gives things value. And then having a video of the work being done as well... Priceless? 🤣

@cliveclapham6451 2 жыл бұрын

@@BradshawJoinery 🤔🎯🎯🎯🎯🎯🎯

@hermenegildorodriguez6876 2 жыл бұрын

EXCELENTE RESTAURACIÓN .. DIGNA DE UN PROFESIONAL

@BradshawJoinery 2 жыл бұрын

Thankyou Very much! 👌

@jimc4731 2 жыл бұрын

The lock will be too high?🤫 Keep up the good work! JIM 🤩

@BradshawJoinery 2 жыл бұрын

Haha, Balls! Cheers buddy

@DovetailTimberworks 2 жыл бұрын

Very nice clean repair, to a good old door that deserved it. Always hard to match color tone with old wood, but I expect some careful die work and you could get it closer. Unfortunately that flashing collar on your pup stole the show on ya!

@BradshawJoinery 2 жыл бұрын

Haha! Thought someone might pick up on that! It slows the traffic when they see blue flashing lights 👌🤣

@BradshawJoinery 2 жыл бұрын

Yeah I used an antique pine die after and it worked a treat

@daves4026 2 жыл бұрын

Awesome video. Would appreciate a video on how to use that saw. It’s same as the one my builders merchant and local B&Q use.

@BradshawJoinery 2 жыл бұрын

Thanks Dave, yes a lot of these .odels were in B&Q stores. This came from one, not previous owner but at some point

@Settez123 Жыл бұрын

great video. Would love to see a little PU glue for dummies video from you. I've never used it but you sing its praises in a lot of your videos so would be great to see a video on the subject

@BradshawJoinery Жыл бұрын

I have been thinking about this. I will endeavour to do one, but time is my enemy currently

@simoncarney9944 2 жыл бұрын

Another great job Ollie. Nice to use old timber for the repair, seasoned through age so it’s done it’s shrinking. I can see you’re going to cost me money again with the cutter blades this time! 😂

@BradshawJoinery 2 жыл бұрын

Haha cheers again Simon! The blades are good for the money but nowt special. Cheaper on eBay I think... 😉 The very best blades are festool speed max ones. Incredible them!

@TheToolnut 2 жыл бұрын

@@BradshawJoinery Top notch craftsmanship Sir 👍🔨🇮🇪 Do you know if those Festool osm blades fit a Bosch osm?

@freebornjohn2687 Жыл бұрын

I've got to take the rotten bottom of an old door and replace it with new wood. To avoid it looking like a new board all the way across I'm going to cut a false line into the board to continue down the line where the original joint is.

@BradshawJoinery Жыл бұрын

Yeah thatll work!

@johnpeplow3985 2 жыл бұрын

I would never have given it a thought about making the slope in the wood at the joint to stop the rain from running into it. Good job I’m not any good with woodwork.

@BradshawJoinery 2 жыл бұрын

Thanks John! Yeah little details like that help, if there was to be movement, it's kind of a failsafe!

@TheHeavyend81 2 ай бұрын

No doubt this is going to be an internal door so not likely to have rain on it but I still think the angle cut in makes for a far better professional looking job which somehow makes it look stronger. Great video and a fantastic job. Can you provide a link of the door after it has been waxed and hung.

@bobbg9041 Жыл бұрын

After stretching it ya put wood hardener on it so it stays put at its new size.

@BradshawJoinery Жыл бұрын

If only that worked with all wood!

@dkg30 2 жыл бұрын

A great fix and so refreshing to see your commitment to doing a professional job. Can I ask what software you use to produce your drawings?

@BradshawJoinery 2 жыл бұрын

Thankyou! I use SketchUp, then use Layout to create the 2d drawings

@jcsrst 2 жыл бұрын

As a rot repair specialist it fills my heart with joy to see such a well done job 😊

@BradshawJoinery 2 жыл бұрын

Thankyou 🙌🙌🙌

@garygilbert1526 2 жыл бұрын

It would be great to see a video ( if you haven't already made one ?) about your Wadkin crosscut saw .Thank you !

@BradshawJoinery 2 жыл бұрын

Cheers Gary, yeah I filmed getting it in place just need to film the dust extraction alterations and then I'll upload it

@ChristianChallis Жыл бұрын

Thanks for the videos they are amazing they have inspired me to lengthen three doors and the frames. Tech question: what size dominoes did you use on this door 40mmX 8mm or bigger? Many thanks.

@BradshawJoinery Жыл бұрын

thats Awesome to hear! I tend to only use 5 x 30 or 10x50. so they are 10 x 50 i think.

@andrewclarkehomeimprovement 2 жыл бұрын

Incredible. On my current job, I need to repair the bottom of a door where it's been 'fixed' with cardboard and filler! How does YT know what I need to know? Many thanks for sharing in such a timely manner!

@BradshawJoinery 2 жыл бұрын

Cheers Andrew! Pleased its helped you out

@megaman2016 5 ай бұрын

Can you put a mortice lock through the middle rail on these types of mortice and tennon doors?

@BradshawJoinery 5 ай бұрын

Ummmm, ideally no, it take one tenon out if necessary, but ideally not both if can be avoided.

@mauserkk98 2 жыл бұрын

Saved another one from the skip .

@BradshawJoinery 2 жыл бұрын

Absolutely 👌

@nicklloyd-jones 2 жыл бұрын

Nicely done. Are you going to fill the groove that's in the bottom rail?

@BradshawJoinery 2 жыл бұрын

Well spotted, it ended up about 7mm deep and there may be a small amount to come off the door so I didn't feel the need to do it! 🥴

@rossmckenzie2283 2 жыл бұрын

Nice work, but... why didn't you fill the slot across the new bottom piece as you said you would?

@BradshawJoinery 2 жыл бұрын

No I didn't, well spotted 😂, it ended up about 6mm, so I didn't seem it necessary tbh!

@randallthomas5207 2 жыл бұрын

For the rail, I think I would have used a dovetail router bit, and set both the interior and top of the edges of both patches to the 14-degree of the router bit. It wouldn’t have occurred to me to do like you did. But it really shouldn’t make a different strength or appearance wise. To widen the style I probably would have made a groove in the bottom of the existing and added a spline. But, again it shouldn’t make much difference in the end. Just a difference of method.

@BradshawJoinery 2 жыл бұрын

Yeah could do! I'm cautious of old doors and nails so don't use your best router bit. The problem with dovetail bits is you have to guarantee the height of the router doesn't alter when cutting so easy to get a wobble in the edge. The best way is with the track saw set to the depth then finish with the multitool 👍

@whomadethatsaltysoup 2 жыл бұрын

Thanks for sharing this very interesting little project. Excellent work and very clever use of the multitool. Just a quick question regarding the blade you use in the plunge saw to perform the rip cut. I've been using thin kerf 24tpi blades, but have found they just don't last very long, tend to wander, and can leave significant burn marks, especially on hardwood doors. Any advice would be appreciated.

@BradshawJoinery 2 жыл бұрын

Tricky one, but the problem namely lies in the blade quality. Rip cutting wants to be alternate bevel with a positive rake, in a 160mm blade 24 teeth is about right but like you I've always found the 24t blades "tinny" to the ear and struggle to get a nice cut. Id try a higher tooth ATB with a thicker plate if you can find it. My HK 85 rips beautifully with a 2.4mm plate blade. Thick blade and plenty of power will solve your issues but most small track saws aren't capable of it unfortunately. They are designed as panel saws with triple chip blades..

@whomadethatsaltysoup 2 жыл бұрын

@@BradshawJoinery Thanks for getting back to me! I was using the 36v Makita, but went back to using the 110v corded one. I've got several tracks, and have one set dedicated to the cordless, and the other to the corded. Yes, I'll definitely be avoiding the thin kerf blades going forward. 👍

@Justinofalltrades1 2 жыл бұрын

What king of clamps are those? they look really good

@BradshawJoinery 2 жыл бұрын

They are really good tbh. T bar clamps 56" ideally you want the Record version but they are frighteningly expensive. Hold God Second hand value though

@asw19B100 2 жыл бұрын

We used to call it door more😉

@BradshawJoinery 2 жыл бұрын

Haha! 👌

@johnomahoney565 2 жыл бұрын

Nice work! Will you bevel the door for hanging or will that be necessary in your case?

@BradshawJoinery 2 жыл бұрын

Yeah I did, use a 2mm packer to one side of the door and EST planer to cut just under 2mm👍

@johnomahoney565 2 жыл бұрын

@@BradshawJoinery Ahh cool, thanks for that. Great content on your site, fair play!!

@anthonyromano8565 2 жыл бұрын

Not bad at all.

@BradshawJoinery 2 жыл бұрын

Thankyou Anthony!

@aytonbob Жыл бұрын

Great work, why waste a good door.

@BradshawJoinery Жыл бұрын

Thankyou Robertt!

@williamcampbell-gray754 2 жыл бұрын

Why the wall saw not a sliding table? Is it space or do you prefer them?

@BradshawJoinery 2 жыл бұрын

Space was the initial reason but for a lot of jobs it's actually better..! I wouldn't be without it now!

@williamcampbell-gray754 2 жыл бұрын

@@BradshawJoinery wow that’s really interesting, I suppose the only major downside is it is not as ergonomic as you are not above the workpiece? You sort of have to bend down a lot? From recently watching your videos though I had no idea how versatile they can be!

@tarap5618 Жыл бұрын

Could you do similar process if you needed to add to the width? Ex. an interior barn door design

@BradshawJoinery Жыл бұрын

Yeah, adding width is easy as it's a straight join allt the way with the grain of the Stiles

@tarap5618 Жыл бұрын

@@BradshawJoinery Thank you!!!

@mattcable6379 2 жыл бұрын

You arse... I can't fit a single CC in my shop and you've got two! Out interest, how much room behind does the arm stick out? Love the video buddy. And a great tip on the starlock - the bosch ones from Screfix are about over a tenner! M.

@BradshawJoinery 2 жыл бұрын

🤣🤣 I'm not rubbing it in, but then new one is absolutely minty.... Without a full restoration your not gonna get better Blades are good, they are cheaper on eBay, I just earn a few pence from Amazon hence the link to there 🤣👍

@mattcable6379 2 жыл бұрын

@@BradshawJoinery How far out the back does the arm protrude? I miss my old BRA, but always wanted a CC .

@Kapt6911 2 жыл бұрын

May i ask what adhesive you are using for the repair that is dispensed in a caucking gun?

@BradshawJoinery 2 жыл бұрын

Hi, I've added the links In the description. Wood weld is probably your best bet but the adhesive is called Polyurethane

@user-ex9hc6cn9x 2 жыл бұрын

شكراً جزيلاً من أي بلد انت

@BradshawJoinery 2 жыл бұрын

Not sure on that one, but thanks

@tedwpx123 2 жыл бұрын

👍👍

@BradshawJoinery 2 жыл бұрын

Cheers Ted 👍

@keanMechanic 2 жыл бұрын

That’s your option on those key blades?

@BradshawJoinery 2 жыл бұрын

What's my opinion? Cheap and ok. The Festool blades are actually very good for the price I think so for best work get them. Sthele version is probably the best

@silverfox8801 2 жыл бұрын

Just watched the shipping container episode. What was it for? Just storage?

@BradshawJoinery 2 жыл бұрын

It's to store timber about to be used and completed jobs in an acclimated environment before installation. It's made a massive difference to the quality of my finished work after installation I get absolutely minimal movement from the timber.

@silverfox8801 2 жыл бұрын

@@BradshawJoinery yeah just saw the other episode. How much did it cost total??

@BradshawJoinery 2 жыл бұрын

About £6k I think, £2150 for container, same for insulation then some electrics and the OSB/battens. Would be alot more now 🤣

@vanzipper6486 2 жыл бұрын

👍

@BradshawJoinery 2 жыл бұрын

Cheers van zipper

@koolaid11289 8 ай бұрын

Hi, I have an old door 32 inch x 80 inch) that I want to use in a 36 inch x 81 inch opening. I need to add material to its width and height. I was hoping to poly it to show off the wood rather than painting it to cover the patch. How can I do it so the door looks good after I apply the poly?

@BradshawJoinery 8 ай бұрын

try to keep the grain in the same orientation as it is. i.e dont add a batten on the bottom under the end grain. adding 4" to the width is alot! it may look bulky on the stiles

@koolaid11289 8 ай бұрын

@@BradshawJoinery we had the idea to make a picture frame (miter the corners) around the door. Do you think this would work?

@BradshawJoinery 8 ай бұрын

@@koolaid11289 it will work but may look a little DIY! Mitres will be tricky to make work when fitting the door too. I would keep the Stiles one full length top to bottom whatever you do

@carolinegoodliffe2226 Жыл бұрын

I have a door that needs renovating and making wider. Would you be able to help me please?

@BradshawJoinery Жыл бұрын

Hi Caroline, Unfortunately i have so much work local to me (and youtube) i am not taking on any orders currently.

@johnnelson5611 2 жыл бұрын

Which PU glue do you use?

@BradshawJoinery 2 жыл бұрын

Hi John, this is Wurth but I prefer WoodWeld

@deemauk2591 2 жыл бұрын

Got to ask, why didn’t you just shorten the styles a little more and then replace the bottom rail in its entirety?

@jcsrst 2 жыл бұрын

If it's not broke don't fix it. Structural integrity.

@jimc4731 2 жыл бұрын

Possibly didn't have any old matching wood? JIM

@BradshawJoinery 2 жыл бұрын

Having some remaining joint leaves strength in the original door and I don't have to worry about panel grooves etc, I also didn't need wide timber for this repair and s full bottom rail in old pine is hard to find. So in short, it's less work this way, stronger and the materials were available 👍

@davidaldrich3488 2 жыл бұрын

Struggling here a little Why not replace the entire bottom piece Repair leftover mortise on both sides or remove the old mortise completely while replacing all of bottom piece If it was to be painted maybe not but I heard you say it was to be a natural finish Ty

@BradshawJoinery 2 жыл бұрын

Just not touching the panel areas saves alot of time, and less timber required. Plus the more of the original left the better, I think it doesn't catch your eye as much

@alvintechnology49 2 жыл бұрын

Hello friend👍👀

@BradshawJoinery 2 жыл бұрын

Hallo!

@melvindenny8962 2 жыл бұрын

Looks like it was planned that way.

@BradshawJoinery 2 жыл бұрын

Cheers Melvin

@erniewhite4768 2 жыл бұрын

How much it costs to repair such a door?

@BradshawJoinery 2 жыл бұрын

£650 was the Invoice

@llamedosr7843 2 жыл бұрын

Gotta get myself a festool tracksaw, my evolution doesn't compare. You might say it doesn't cut it

@BradshawJoinery 2 жыл бұрын

They are real nice to use. I think the latest model with the thinner blade has sorted out the underpowered nature some didn't like about the ts55. I've always got on well with it