Dryer Heating Element Multimeter Test

Рет қаралды 1,440

2 ай бұрын

Dryer not working? How do I test a dryer heating element? In this video, we show how to test a dryer heating element with a multimeter. A continuity or resistance test will determine if there is a continuous path inside the wires. Without continuity the heating element will not working, and the dryer will not heat.
AMRE Supply provides homeowners, service contractors, and property management with the parts and knowledge needed to get the best performance out of any property. Stocking the largest selection of appliance parts, heating, plumbing, lighting, and janitorial supplies, AMRE ships almost anywhere in Canada within 24 - 48 hours. Expert help is available online, over the phone or in person at one of the many locations across Canada.
Connect with AMRE Supply
Website - www.amresupply.com/
Facebook - / amresupply
Twitter - / amresupply
Instagram - / amresupply

Пікірлер: 4

@joewiddup9753 2 ай бұрын

Looks like a Samsung element. It's important to visually inspect them. A rare failure can happen when the wire breaks and both ends come in contact with the center plate. It will still heat and run, but the drying sensor never shuts off the dryer because it thinks the stray voltage is a wet clothing signal. You could theoretically get shocked by touching the frame and another ground because the ground plane is now the electrical return, but i have never heard of it.

@AmreSupply 2 ай бұрын

Thanks for sharing, those are good points. We don't have a full series on washer and dryer troubleshooting but we'll be including details like the visual inspection and testing for shorts as those can both cause problems. We'll be approaching this in the same way that we filmed our series on ovens: kzfaq.info/sun/PLCo9SMjkdWBzSdZB9Un3GKKI0Iohlpf9a