Truly appreciate your time you put in and shared with us thank you so much ❤

thanks for always giving us the best info STAY BLESSED UP

Absolutely great information I really appreciate about your honest review 👍

I think This may be the reason I may be dealing with inconsistencies with my white heat print transfers. I think it’s because they are stored in my shed. I’ve ruined sooo many shirts. Can’t find many videos on this topic. Thanks for this one

I just started having issues a few days ago where my prints look fine after they come out of the printer, but when I powder it the ink shifts and if I hold the print up to the light I can see tons of holes in the print. I noticed that my humidity is at 61% . Is this the cause?

What about when the printer is not actually printing? Like overnight? As it’s sitting does it need to be above 50

hi friend. greetings from Spain. I found your work very instructive. Lately I'm having a lot of problems with the white ink on my Epson L1800. If I increase the white level in Cadlink it makes puddles in the colors and the white only part looks good but a little runny. If I lower the white level to 70 percent, it looks good on the colors but the white-only area is left with holes. I thought it was humidity or poor quality of the film. but you have confirmed to me in your video that it is a problem of humidity or low temperature. In my workplace at this time of year it is less than 15 degrees Celsius and humidity of 55. Could that be the problem?

Have you noticed different brands of ink causing clogs even with the correct humidity?

Seen your video where you converted Epson 1430. I have AcroRip 10.3. All my colors print but white ink will not print are you able to help me?

What temperature do you have your curing oven at and how long?

Im looking to start tshirt business like you , i am from india , can you tell me where you sell tshirt how you sell them and your selling price per tshirt

If white coming out milky. Can that be caused by humidity?

Do you have any experience with really low humidity? I am in the north in Michigan so it's cold here now and we use a pellet stove to heat my area and it makes everything really dry. My prints look speckled.

I print commercially. Every single place I work/worked at had it dialed to 40%.