Dyson SV 11- Brush doesn't spin after cleaning... Next step!

No video

Dyson SV 11- Brush doesn't spin after cleaning... Next step!

Рет қаралды 49,050

Күн бұрын

If you have cleaned out your Dyson Power Head p/n 248485 and it still does not want to spin, try cleaning or lubricate the bearing in the brush centering bushing.

Пікірлер: 27

@mjb7198 Ай бұрын

Omg thank you so much! Did everything clean the connectors the hair on the brush and nothing worked ! I was about to throw the Dyson away until I came across your video. Used some wd40 and It worked ! I can’t thank you enough for saving me a lot of money😊

@DuaneSheehan Ай бұрын

Glad that it got your brush spinning again for very little time spent working on it! Way to go!!!

@itsalexikk 5 ай бұрын

Thank you for your video! I lubricated the bearing, but then I had to manually spin the turning mechanism (at the opposite end) and keep turning the vacuum on and off (carefully). That somehow worked, in case anyone is struggling!

@ruthgiannandreaful 6 ай бұрын

Bro I must have watched a dozen videos and none of them had the issue I was having. THIS is what I was looking for! Thank you so much it fixed my problem!!

@akcd907 6 ай бұрын

Glad it helped you out! It's great I could share the info.

@alexissutyak2493 3 ай бұрын

Thank you!!! Was at my wits end watching by videos that suggested cleaning it- you saved us!

@LaJewel 9 ай бұрын

Finally - this is the model I have. It's cleaned out everywhere else. This is a major design flaw.

@lorenzoferrajoli9012 Ай бұрын

Thank you very much I well lubricated that particular piece as you very well indicated in the video, it worked perfectly on my Dyson V7 which had this problem. I thank you very much for sharing this information. have a good life :)

@user-mk9id4ko9t 11 ай бұрын

Thank you for your advice! Now it works!!!! 💙😃

@anchorpoint009 5 ай бұрын

This was the problem with mine- helped alot. Thank you !

@misterleif 2 жыл бұрын

This fixed it! You're a genius! Spent hours cruising KZfaq looking for a fix. Was just about to give up when I found yours. Thanks!

@akcd907 2 жыл бұрын

Hey Leif, glad it helped you out and got your Dyson up and running. That is what is so nice about KZfaq... people helping each other! I have found many "fixes" on KZfaq myself, you just have to know how to ask for what you're looking for and the answer is there!

@anastasiiaikramova1824 6 ай бұрын

That’s what I need 👍Thank you

@akcd907 6 ай бұрын

Your welcome.

@rosannam1113 10 ай бұрын

Thank you underrated hero!

@Leo-pc7nr Жыл бұрын

salve questo analogo motore l'ho smontato tutto perchè si era inchiodato completamente solo che nel rimontarlo mi sono distratto e non ricordo se i tre ingranaggi in plastica che ruotano all'ingranaggio principale, devono perfettamente allinearsi con i tre supportini che si trovano all'interno del contenitore in plastica. Hai forse un video ove posso vedere correttamente la ricomposizione? hi, I disassembled this similar engine completely because it was nailed down completely, only that when I reassembled it I got distracted and I don't remember if the three plastic gears that rotate on the main gear must perfectly align with the three supports that are inside of the plastic container. Do you perhaps have a video where I can correctly see the exact recomposition of the ENT? I thank you