I just bought a parts caster with this bridge on it and almost went cross eyed trying to figure it out. This was a great video and it showed everything I needed to know. Thanks.

I also have a kd design bridge. I've never had issues with it at all. If anything it's better than most. Cheers for the upload

Finally someone who has uploaded a useful video about this bridge. Every other video I found was useless. I've not bought one yet but this videonhas answered all my questions about it. Be buying one now for sure. Cheers.

Thank you so much for taking the time to make this video. Just ordered a eart with this bridge

Bought a strandberg style kit that's the same body style as yours, thank you for the instructional video this is the first headless bridge I've ever messed with and I was completely confused till I found your video hahah

Thank you for changing the color, it's beautiful

Thanks for this instructional video. This solved a stuck G string saddle I had. I agree that some people are bashing on EART and the bridge, but not realizing how to properly set it up. Once that is done, it's very good. Hopefully EART at least put some documentation in with the guitar or on their website so people can find the info.

thank you for the video. I am receiving one tmr and i am confident that I can set up the guitar as soon as I see it.

This is a HUGE help - and I’m going to share your video! This same bridge is on the Zivix Jamstik Studio (which is an ALP Leaf 100 with minor mods and Zivix’s MIDI electronics). It seems like a lot of headless guitars brands are installing this very same bridge. It really is a great bridge for tuning stability, but nobody seems to offer solid, clear instructions - not the guitar brands using them, nor KD. I don’t even see a KD manufacturer website besides for some of their products being sold on Amazon (which I found out from another KZfaqr who purchased a similar variant of this bridge to install on a guitar about a month ago). Anyway, I figured this all out the hard way. I was about ready to tear my hair out, but I didn’t give up. I wish I had seen this video before I attempted a string change - two strings (g and high e) were choking out and very tight after putting on D’addario XT 9-42, the high e brass saddle was wiggling around on on, plus my low E needed an intonation adjustment. So I bravely got my tools and just tried stuff until I hit gold lol. It’s worth adding that the intonation won’t be right if the brass saddles aren’t raised all the way up. That’s gonna make the break angle just right along with loading the string ms. I couldn’t move my saddles any more, so I toyed with the string height - voila, pitch perfect intonation! The JamStik Studio pickups also seem to be from the same manufacturer. They are marked KD with a picture of a Diamond just below the letters. Do you know anything about KD and where they’re located? I was trying to get more info because I’m a nerd like that, but I couldn’t find any. They’re actually pretty good pickups! Anyway, gonna go pass your video along to the Jamstik FB group and that guy I mentioned above who purchased the bridge on Amazon. Thanks SO much!

Also I just ordered a GW2. Thanks for the informative video. It has eased my anxiety about this bridge aspect-mostly I got the Eart to use as a travel guitar since I have plently of others , about a dozen of mine are project guitars or built from kits with my upgrades. Cheers : )

Thanks bro 🎸 Just got mine & this vid helped allot! Keep on keeping on brother 🍻

Thank you so much for this video! I just got an Eart GW2 and all of the strings I was able to get consistently tuned except the 6 string... I started having upset feelings and considering taking it into a shop but then I googled and found your video. I noticed that based on the set up the string height on the 6th string was wayyyy too low, so I adjusted it to be much higher and boom. Now it stays in tune like the rest of the strings! I just ordered a MusicNomad MN602 as well so I can better learn how to measure. Thanks so much for this vid

Great informative video. Make me more confident on getting this bridge!

Very helpful video and well explained. Thanks!

THANK YOU for posting this video. I broke hi E string on Grote Headless guitar that has the same bridge. Could not figure out how to change the string. Just ordered, today, Harley Benton headless w/ SS Frets and easy adjustment bridge. Never going back to traditional style guitars, except for nostalgia. Headless guitars RULE

Thanks for doing this it's a huge help, the angle of the camera is great. I do appreciate thorough explanations, much better than insufficient, however if I have one critique it would be that you talked a LOT for example you said let's get to it but you had already talked for 3 minutes! I know you wanted to get some things in but just keep it tight! Also you explained a couple things twice as if you weren't sure we got it the first time. Once again this was very helpful I hope you don't mind my suggestions.

Great video. I've just bought one so I'll be using your tips 👍🎸

I am buying myself an eart W2 in about a week's time and this video is really good, my firstheadless and i couldn't quite wrap my head around this bridge

Great video again

Thanks man for the detailed explanation. But now i kinda want a small tuner i can put on the headstock so that i can use it with b bender and other type of whammy thing. Have you tried abm 3800c?

Changed the strings on mine today as I had serious intonation problems on frets 12+ (that I haven't noticed since I wasn't really soloing) and noticed the following: 1) Intonation was good up to the 12th fret 2) Frets 13 to 24 were off the more you'd go up the fretboard (so 24th fret was like -20 cents off) I'm not a pro when it comes to setting up an instrument but couldn't really find any relevant answer on the internet so what I did was I kept decreasing string length, even if the intonation on the 12th fret was spot on, until I got an acceptable intonation on the 24th (which is like +- 5 cents). Writing this comment in case there's a poor soul who got tormented like me over shitty intonation without having an answer on the internet.

Thanks for the tutorial I just bought this for a skateboard slide guitar that I'm building and I had no clue how to string it and of courses it came with no instructions.

Hellz yea ! Thanks for the breakdown

that was very helpful i built a headless guitar had to take the saddles off just to get the screws in that hold it to the body not a very good design the jack plug had to go into the cavity not long enough to put a nut on the end they really didn't think this thrue had to tap it in the hole its a very tight fit if it ever comes loose ill change that and make it right.

Thanks a ton bro!

I don't wanna be weird but I wish I could pay you to follow me and explain everything in layman's terms the way you did. 😂 Absolutely perfect video you're a good teacher. Thanks, just bought one, didn't come with that cool magnetic tool tho...

Dude thanks so much for this

at the top of wheel is more stable than the bottom because roller must roll more easier during bends for returning string in previos position

I just got one of these guitars! Do you really have to drop the rollers to re-string? Seems like once they are set I wouldn't want to have to reset the height at each string change. Thanks for your video.

I’d love to see the alexi Flying V :)

Can you make a video on how to install that type of bridge, because someone put a ground wire under the bridge and in others they don't

So glad to see a vid on these bridges thank you so much man for real im planing on putting one on a squier strat I noticed the string spacing is a little different but i think itl work have you or have any body out there put one of these on a strat style guitar? Thanks again

Thank you. This should keep me from getting discouraged when I read the reviews. Zzounds sent me a Les Paul with a shattered neck and replaced it with a guitar with the headstock snapped off. Then they ghosted me! So, I think I'm gonna have to convert it to a headless?

My GW2 is in the mail and this is a very useful video. I'm sure I'll figure it out once I actually change the strings for the first time, but how much string do you actually cut when changing strings? Or rather how far past the hole in the bridge do you need it to go before cutting, to get those 2 winds you mentioned?

Did you do mess around with the tuners to get them to move that easily or is because there was no string in there? (kinda having a hard time fine tuning by hand, I always gotta use the lil' thinghie for tuning).

what size is that allan key you are using. I am trying to adjust my heights but my allan key is too big

Where did you get this one? I like the volume and toggle only setup.

What’s the thickest string that can fit in the low E wheel? I’m considering one of these but I commonly tune to drop C & lower, thanks!

Is there a limit to the string gauge I can use on this bridge? Iv heard mixed feedback but would love your perspective. Thank you so much! 🙏🏽

Is there any upgrade replacements available for these bridges??

Seems the way you do it requires you to set string radius every time you change strings. No problem if you are constantly changing string Guage but if you are using same gauge you are adding a lot of wear and tear to bridge.

I have buzz coming from my bridge - I have the same style bridge, any recommendations?

I like the colour theme of eart headless but just not a fan of bridge style, is there a way to change the of the guitar with stranberg style bridge??

I have the bass version of this bridge did you have grounding issues when you got the guitar and does bridge seem to high on that guitar does on my bass

I just got one and I’m having bad rattle on the D and B saddles when I play those strings. It sounds like fret buzz but it’s definitely coming from the bridge. Any ideas? Thanks.

Second video and still no mention of the screws at the rear of the bridge. What do they do?

The only thing left to find out is if this unit is conductive enough for grounding ?

Anyone know what size saddle intonation screws these have? Mine is missing on the G string. It stays in place with the string holding it down... Who knows for how long. Thanks in advance!

For some reason my strings won’t go any lower I unlocked it just like u said

Hey I tried lowering the saddles but they won’t move down, any ideas?

looks like i adjust my action to max high, but it still always buzz, does it means the guitar has some problem?

i have bad intontation issues with the bottom e string, when i fret the 12th fret the string goes sharp, but theres no more room for the saddle to move downward. any suggestions?

Does anyone know how to raise the neck pickup / humbucker When i turn clockwise it lowers when i turn counterclock it just loosens the screw :( HELP

Where did you get the winder ?

The Flying V

But, do the intonation!!

You don't need to repeat things so often, rather explain in a systematic and clear way.

My man...way too talkative. Wrap under not over. Got it. 2-3 wraps. Got it. On and on and on...good lord.