Eastonmade; A Big Huge Deck

Рет қаралды 7,409

7 ай бұрын

Really appreciate all the comments on the last video guys. It was a lot of fun getting all the guess', but so far nobody got it right. Watch the video to find out what the new options were.
Thanks for all the feedback and support folks. It's very much appreciated. It's great that we are building such a strong community around our products where everyone can share their ideas and thoughts. Hit the like and SUBSCRIBE button if you haven't done so yet and I'll keep you in tune with what's going on in the firewood industry. Hope to see you all on the next one!!!
Give us a call for more information!!!
613-812-3213 Log Splitter Sales/Service
Check out these awesome KZfaq Channels!!!
Like our videos? Check these guys out!!!! If I missed you and you want your channel on the list drop a comment below and I'll add it on the next video.
Eastonmade Ultra
Glenn @oldschoolmillenial / oldschoolmillennial
Chris @inthewoodyard / inthewoodyard
Joe @joesfirewoodvideos / joesfirewoodvideosii
justin @lifesapprentice / @lifes_apprentice
Eastonmade Axis
Buckin billy @buckinbillyray / buckinbillyraysmith
Joe @ohiowoodburner / @ohiowoodburner
Adam @hometownacres / hometownacres
mike @KNLfirewood / @knlfirewood
Gord @gpoutdoors / gpoutdoors
Dan @armsfamilyhomestead / @armsfamilyhomestead
Brittany and Francis @BandFFirewood / @bfoutdooradventures
Neil @neilkochdigdriveDIY / @digdrivediy
Eastonmade 5-11
Gord @GPoutdoors / gpoutdoors
Eastonmade 9-16
Ben @survivingcountrylife / @survivingcountrylife7069
Paul @williamsonridgeoutdoors / williamsonridgeoutdoors
Eastonmade 12-22
Harry @thedriftlesshomestead / thedriftlesshomestead
Chuck and Deb @ironandoaksawmill / ironoaksawmill
Brade @savagefirewood / @savagefirewood
Reuben @earthandbloom / @earthandbloom
Todd @struckacordfirewood / @toddpac1
Eastonmade 22-28
Gord @GPoutdoors / gpoutdoors
Doug @offgridwithdougandstacy kzfaq.info?searc...
Eastonmade 22MB
Chris @inthewoodyard / inthewoodyard
Eastonmade 48C
Kevin @skidderkev / skidderkev
HTTPS://www.eastonmadewoodsplitters.com
#Logsplitter #firewood #logging #treecare #arborist #chainsaw #sawmill #forestry #homesteading #offgrid #heavyequipment #firewoodprocessor #logger

Пікірлер: 23

@bossDmaster 7 ай бұрын

I can only pretend to be an expert, but it looks like the new roller spacing really increased efficiency.

@buckinfirewood 7 ай бұрын

Think you guys are onto something there... The logs seem to be much easier to handle.. alot less "pickarooning" going on means alot more product at the end of the day... Looking good my friend

@tommyrichmond1293 7 ай бұрын

Love that deck hey when you run a deck full you be ready for break

@davidedwards3734 7 ай бұрын

Listening to your customers is Great! Glad you aren't afraid to make their ideas happen!! Stay Hydrated and Have a Safe Day

@killinskindlingfirewood1851 7 ай бұрын

I think Chris will enjoy his new 60c processor and disc cleaner for his yard. 😎🪵👍 I like the longer deck, though it does take away the ability to move it from place to place.

@GPOutdoors 7 ай бұрын

Always improving the products - Nice mods Andrew!

@bwillan 7 ай бұрын

The longer/deeper log deck will be a sigh of relief to those that run the processor solo or have an equipment operator that is a little slow to keep up with the speed of the processor.

@SkidderKev 7 ай бұрын

i really like that new roller design. it was a big issue for us too.

@BevanMoffatt 7 ай бұрын

Longer deck is a good idea. Ever thought of making a longer deck like that and have it fold somewhere in the middle for transportation? Like take the outer legs right off flip the end piece right over with a machine then lift it up to move down the road

@BevanMoffatt 7 ай бұрын

Then u could have a max length deck no bolts to take out no chains to take off just pull the pins like the legs and flip it up in half

@buckinfirewood 7 ай бұрын

Happy birthday BTW

@mikebickerton7356 7 ай бұрын

👍

@BertsCustomCuts 7 ай бұрын

Wont be long and you'll decide to put the disc cleaner on a trailer frame for mobility too. Narrowed up between the rollers looks like it works really good.

@gerryspang5917 7 ай бұрын

I think the narrower space between the rollers is a real bonus, can the old processor be retro fitted or is it a huge change? enjoy your videos and often thought about the smaller diameter wood, and notice Chris sometimes cuts. A couple of. Smaller pieces and tries to push them through but not very well. Cheers my friend.

@LeBlancfirewood 7 ай бұрын

Love how your always improving

@3cl1 7 ай бұрын

What a cool business you have, Andrew.

@buckinfirewood 7 ай бұрын

The smallest log I got was 1.25 " on the butt.. and 0.75" on the top.. 18 foot long...lol... We use it to clean out the birch bark from the Grizzly on the 30 foot bells conveyor....lol...

@skeets6060 7 ай бұрын

Ya done good! Question have you ever thought about going the other way. By that I mean smaller to the one man processers, like the Wallenstein? It might be a full market , but I thought I would ask, if I can cut in the woods and leave the trees lay stacked and then run back with a dump trailer and split into the trailer , I have saveed time, money ,fuel ,and my old body a couple steps, aint as fast as the big boys but you know.

@darrellobrien4416 7 ай бұрын

As an idea will a "v" load deck where lags are loaded into the "v" then conveyor lift logs to the saw conveyor work?

@EastonmadeWoodSplitters 7 ай бұрын

It may work

@kevinbrewer2141 7 ай бұрын

Those rollers closer together seem to work well with large and small pieces. You are always improving the machines in the industry. I've been watching a lot of videos on many other machines and think that you make one of the best machines. I did, however, like the way Dyna did the wheels on their folding convoy. That live deck is huge.

@EverythingElliott 7 ай бұрын

"The deck is YUGE, never been a better deck, its the best deck." -Donald Trump (probably)

@ethanpemberton9011 7 ай бұрын

I totally failed. For following Chris and Brad religiously and also being at the paul bunyan show. I payed to much attention to the business of the machine than the support side of it.