Ebike powered by my extra drill battery.

Рет қаралды 86,545

4 жыл бұрын

Today's lithium drill batteries contain a lot of power! Can they be put to use on items other than drills? YES! kind of.
If you enjoy my content and would like to help out with buying tools and supplies for more experiments, feel to check out my new Patreon page at : www.patreon.com/user?u=29534705
Music:
'Dolce Vita' by Peyruis is under a Creative Commons license Attribution 3.0 Unported (CC BY 3.0)
Music promoted by BreakingCopyright: • 'Dolce Vita' by Peyrui...

Пікірлер: 59

@TheUniversalid 3 жыл бұрын

I personally recommend buying the Bafang bbshd and buy power tool adaptors. You can use 20/60v max makita 18v batteries or m18 batteries. My 3,600w bbshd (luna ludicrous v1 controller) and 3x M18 12.0ah batteries in series (peaks at 63v) and a bridge rectifier that can handle 100a (1.2v drop to make the system work) and pow! I have a 4+ hp ebike with power tool batteries.

@AlQaeda198 2 жыл бұрын

You should make a video about it

@perfect10northgate51 2 жыл бұрын

Good luck with it are intended to give you an 9am appointment for a couple

@innovativeintelligence4172 2 жыл бұрын

Cool Bike you should make the plywood box out of plexi glass

@meetoo4368 3 жыл бұрын

Just hook it straight up like normall to existing ebike controller just stay under 62v and you can use any 18v in series or 60v power tool battery combo,no issues

@Cesar-cm4if Жыл бұрын

Agreed! Something else to keep in mind while riding ebikes are helmets, most people wear cpsc helmets, when they should be wearing nta helmets like xnito or bern hudson

@terryw7921 4 жыл бұрын

Do you need a inline fuse too do this ,or is it ok,

@ahah1785 4 жыл бұрын

2020 and we still have no cheap hi quality lithium batteries... this is pretty much the only choice to avoid those horrid chinese lithium packs... or way overpriced prebuilt ones just because it the new hip thing... makes me sick.

@barry_g8443 Жыл бұрын

Excellent investigation

@rwm1980 2 жыл бұрын

Damn dude that's an expensive drill

@DarioFoley-qu8ns 10 ай бұрын

Expensive but does the job well

@MrTacoMan247 3 жыл бұрын

Wal-Marts hart tool has a 40v line of batteries that would be perfect for that

@bobcatt2294 2 жыл бұрын

Wal-Mart = cheap Chinese.

@MrTacoMan247 2 жыл бұрын

@@bobcatt2294 hart is made by Milwaukee

@bobcatt2294 2 жыл бұрын

@@MrTacoMan247 Great - thank you.

@williamwindex3890 2 жыл бұрын

Watching this cause I just used a craftsman 60volt and parts of the weed eater to make it snap in.. 48-60v controller . Simplest thumb throttle . I'll up load the video tomorrow after the first test

@levapalestine Ай бұрын

video?

@sharadrokade9841 3 ай бұрын

Good

@toddperrah8933 3 жыл бұрын

The wood is classic

@adamkostan1582 3 жыл бұрын

Nice video -thumb up n sub -keep them coming

@rjbikes1237 2 жыл бұрын

how do youse connect all those led acid batteries toegether too power it

@KiwiMaker 2 жыл бұрын

Add them in series to get 48v

@rjbikes1237 2 жыл бұрын

@@KiwiMaker thank you what charger did you use and did you use a fuse kit for your controller

@front2427 2 жыл бұрын

I have dewalt batteries, how do I safely connect them in series for 36 v ,what method of connection that is secure?

@rickybailey7123 3 жыл бұрын

That was cool saved me alot of burning my tools up thanks for the video dud life saver!!! 2 👍 up !!

@bobcatt2294 2 жыл бұрын

I would start with using 24 v dc batteries and then hook them up in series. Stay away from 18 v - go with anything that are increments of 12 v like 24 and 48 and on. Thumbs up.

@KiwiMaker 2 жыл бұрын

Yes good idea, I was just hoping I could use some batteries that I already had 😃

@md.nazirmahamud7337 4 жыл бұрын

How much price $??

@patrickday4206 Жыл бұрын

Be careful not to run the batteries to low

@alaukikdeepboparai8131 Жыл бұрын

Why not?

@patrickday4206 Жыл бұрын

@@alaukikdeepboparai8131 there is a point where it won't charge back up sometimes

@infonator1 4 жыл бұрын

Isn't 60 volts a little too much for 48 volt battery. I thought that 54 volts was about as much for 48 volt battery???

@KiwiMaker 4 жыл бұрын

The 54v and 60v are the same battery, just labeled differently depending on the country.

@sunoncream1118 7 ай бұрын

ive done it.. on ma very old (+-10yr) 36volt 16amp peak ebike.. 3d printed adaptor to hold battery as 3p2s , and so the battery is already some 2p5s , that so make a total of 6p10s of 2200mah li ion.. for 180 eur total, (adavantage vs china is cell are 3yr under guarantee:)

@YourOwnWay 2 жыл бұрын

Genius ideas! Do you have a video on how to make the e-bike?

@patrickday4206 Жыл бұрын

Just ran it to low just need to open it up and charge cells dewalt has the low voltage shut off in the tool

@KiwiMaker Жыл бұрын

Ohhh that makes sense! im just used to the bms charge controller being on the battery itself.

@Chronicize03 Жыл бұрын

Can I use a portable lithium power bank directly to the motor?

@sunoncream1118 5 ай бұрын

lol usb ebike? XD

@thayalansuntharalingam1051 Жыл бұрын

350w probably ideal for ebike you got a motorcycle hubmotor

@KiwiMaker Жыл бұрын

Haha yeah its pretty powerful :)

@toddperrah8933 3 жыл бұрын

Slot weight if ask me

@SimonStuff2000 3 жыл бұрын

I don't understand,why I need a controller?

@williamwindex3890 2 жыл бұрын

The hub motor has a chip inside.. it needs 5volt source and also has its own three smaller hall wires that get signal from it

@rodr5243 Жыл бұрын

Check your pins in the battery. When. You insert the shade bits it widens the contacts in the battery & the tool pi s are very thin. Just bend the battery pins back to original space & it will work. I done this to jump my truck & same results after using spade terminals- or you would seen smoke & smelled melted solder from the battery to actually damage it. Just my thoughts.

@KiwiMaker Жыл бұрын

Oh good tip! That would make sense