Heck yeah Aurora Giga Deep Dive! Glad to see you updated to the latest firmware. Was told there is another update in the works to fix a few new minor issues. But really happy that extruder randomly crashing into the bed issue has been sorted

Oh yes, brings back great memories of adjusting the bed height and burying the nozzle into the coating :)

You have to print a life size Aurora !

I have no desire to watch any other 3D printer reviews; if you two beautiful people didn't review it, I simply wouldn't buy it. I hope the 3D printer manufacturers realize how lucky they are to have you!

best review of the giga. no need for face time. seeing the machine is more important than the reviewer. more competent than other reviewers

HOLY MOLY That is huge! This machine would be fun if you have a 3D scanner, sit down on the print beds and scan yourself sitting there, then print out a life-size model of yourself sitting on the machine, how cool wouldn't that be?

The wheel idea is something that should have come as standard. Good idea for sure. Excellent review.

I absolutely love how you put the actual work into giving the most honest and unbiased feedback and reviews. Everyone should strive to match your work, you really are the gold standard! Please know that so many of us have really appreciated your hard work and dedication to giving us the knowledge base on what to buy and how to use it as well! Great job, can’t thank you enough!

You are the GOLD STANDARD of 3D printer reviews!!! Keep up the GREAT WORK YOUNGN'!!!

It could have been so good....but everything went cheap...I don't understand why they didn't design this around an enclosure since that is certainly needed. The location of that USB drive is really bad. You're correct - a machine this big will want big nozzles and some big flow rate. It's too bad they didn't consult with someone like Slice Engineering to put a Mosquito Magnum in there or the like. It'll be neat to see what the community mods this thing into.

Sigh.. scratching the bed on the first print is a right of passage for most printers.

I miss the opening "todaaay". It's iconic. Great review as always.

Wow the two of you are incredible! Now I can print my grandkids their DC doll-house and castle super duper size. Thank you for the great service and effort you put into this keep the info flowing 💪

Your reviews are really well done, Thank you!

Love your reviews, thanks for sharing!

Great review, been wanting to see this printer.

Congratulations on your success in getting the giant to work!!! As far as I've seen, you're the first reviewer to succeed!!! Eat your heart out, Joel.... hahaha. Another fine review! Well done!

You did not make a mistake by not connecting the filament sensor, the design logic needs to be reversed so that if the filament sensor cabling is not connected, it shows that the filament has run out. This is simple failure, logic design.

I was waiting for this review

Excellent review. As usual.

YES I HAVE BEEN WAITING FOR THIS REVIEW AND IT DIDNT DISAPPOINT THANK YOU SO MUCH

Great video. It was very good to see someone having good success with this printer. I always felt it had great potential if Elegoo could get past all the previous issues so many others have had. Even though i dont have room for a printer this big or the money to get it, it would be a lot of fun to print some big items on. Love all your videos and always my goto source for checking on Pros and Cons of printers.

Everything is always on point. Can't get enough!

another thoroughly delightful video, Thank you.

What a great and thorough review! Thanks!

❤❤❤❤ I love we are seeing some updates from the first round of testing to this one 🎉 good job @Elegoo Now we just need an update on when backers will start seeing machines. 👍

Another informative and excellent review!👍

As always nicely reviewed.. Interesting to see the size compared to full size you and your brother 😉

Great review as always. Good points ❤

finally elegoo Giga with our little angel Aurora 😍😍😍😍😍😍😍😍 i was waiting for this review , u did a great job to explain the entire machine . 😍😍😍😍😍😍 appreciated it was amazing . 🥰 the most beautiful part when both of u helping each other assembling the machine ..cuz all the printers that u reviewed before u were the only one who assembling them > great job aurora 💗 big love from Iraqi 3D print community 💕

Hi Aurora - thats a massive printer, 31 x 31 x 39 inches, wow. Thanks for sharing with us. Always good work. i could see the potential benefit of multiple print heads.

Quite literally, every flaw of the Neptune 4 cranked up to 11. Good job, Elegoo!

I remember asking myself last week when you were going to review this printer 😅. "Hm... Nice reviews, but what does Aurora think?" 😂

Glad they finally make 3d printers this big because now I can make that 24 inch 3d printable pipe wrench I always wanted to make 😀

I was hoping you would review this ☺️

What an awesome machine!

Thumbnail made me think you printed yourself with it haha. Interesting to see some of the same issues other reviewer had still exist, but also the fixes that were added.

Great review!!! Of course I am a little jealous that you got such a huge printer but I think most people would be as well.

Great review as always :). P.S Thanks for reminding me to update the firmware in my Elegoo printer 😅.

Another superb review. Especially for bigger printers variable extruders would be useful if possible. Where flow rate adjusts with nozzle size adjusts with geometric detail and placement.

Thank you for your review. I am certain KAMP would be the perfect upgrade for this machine.

Eyyy! We see the kuya for the first time~

Amazing review. I just wish you were able to print the whole oscar statue to test the full z-height. Great video though

Interesting thanks. Good for large sculptures, furniture and architectural geometries only a 3D printer can make.

Sounds like you had more luck than Joel. Great review as always!

Aurora the brave ❤ - Repurposed a 2500$ printer as a sitting area 😊

3:15 ohhh I believe I've seen this! this is the one thing that makes this printer interesting to me

¡Esto sí es una review! 👌👍👏👏👏👏👏👏💯💯

Based on my experiences with my RatRig V-Core 3.1 500 I would say having 5k acceleration on this huge printer is very respectable. I don't use more than 5k accel for printing moves on my 500x500x500 printer either. I use 10k for travel moves. Setting it for more seems to lead to occasional missed steps. Elegoo seems to have used a thicker and stiffer gantry for the X-axis than the V-core stock one but that makes it heavier too. So it is a fight between having enough spare torque on the steppers to overcome at least slight drag of the nozzle on imperfect print while at full acceleration on one hand and having stiff enough gantry to avoid forcing the input shaper to modify the acceleration too much on the other hand. I would say Elegoo did a decent job here and got a good compromise for such a huge printer.

For carboard spools one can print rims to support the edges

I was not expecting the tolerance test to do that well lol

Greate review as always. But is the belt at the head, realy hold together with zipties?

I was an early bird Kickstarter backer... we got them for $1250! That was a fantastic deal in my opinion!

Its a monster. I would love to have one. No idea what I would do with it. I do a lot of prototyping and fixtures on my MAX and it is pretty nice.

Was the pei damage in the beginning your mistake, or the calibration settings?

8:05 I wish Elegoo makes the SD card reader more accessible to the bottom or the top of the panel instead of cracking the panel open. 12:02 20,000 mm per second? I would like to see that in action! 14:40 I guess I was expecting more for something at 1mm nozzle. Shows how much I know about 3d printing. 19:07 Is that a Grammy? 17:38 Ah, it's an Oscar. I forgot that a Grammy looks like a record player. Ooops.

You need to get tronxy3d to send you guys one of their veho800 to review

This Oscar should have been printed with a gold silk PLA 😁😁😁

Thank you for your thorough review. Your upclose shots are very informative. Really nice editing. Just a question: Do you have an airfilter/ air purifier in your garage for all your printers? Thank you so much 😀

This is cheaper than a prusa, amazing 😂

Support for AMS-like multicolor addons like CoPrint would be great for large object continuous printing using just regular 1kg spools instead of large ones.

So much for info..Tronxy VEHO series has larger 3d printers

Was wondering if you were going to do a review. Gonna need another garage for that one plus your others.

Your honeycomb box looks _tiny_ on that monster!

Great review! Do you have a link for the furniture movers that you used?

Pls place the white oscar print in the background as Decoration for future videos :D

I always say to manufacturers "send to Aurora". What's next? Tronxy Veho Pro 600 v2 (klipper). 800 version will be much later.

Was there a first layer sheet? Did I just miss it? That’s the main thing I was looking forward to seeing lol

👏👏👏👏

Another great and extremely thorough review. No one does it better and I really like the pros and cons lists you do for all of them. I think Elegoo released this too soon and really made some poor choices for hardware and setup. It should have had a top of the line hotend and there is no way a printer with this large of a print bed should have to be manually adjusted with set screws. That is unbelievable to me with all the other printers being entirely automatic for both the bed and Z offset. At this price point of $2500 there isn't much excuse for that. The components they are using are certainly not top of the line and other than the frame itself, I think the design choices are very lacking. I was so excited when I first heard about this printer and they hype certainly doesn't match the end result. I would never pay this much money for a printer with manual bed and Z offset. I am not an Elegoo hater, and I do like many of their other printers and their Rapid series filament is awesome.

0:27 You know its a massive printer when she sits in it lmao 11:21 FYI Bottom Half of the screen has incorrect printer names

Great Job as always. I was nice to see more of you also and it helped to scale the size of the printer. I wonder how would you rate this printer. i was a bit supprised when this came out as I am in the process of making my oun for a project I am working on and now seeing this review i wonder if i should just buy this instead. I spent 2700$ for my Phrozen so i think this is a steal and I am sure i can make adaptations . Say hello to your brother as he seems to enjoy much of the hard work. I had a different idea to increase the speed of this printer but we will see if they take you advice. They are out of stock by the way so if you ever want to make room and sell this i am interested. have a good one. Looking to hear your rating. You are Aweson as always. Thanks.

Have you printed anything else big yet? Giant Claymore? an actual bench? gigantic cali dragon?

Flying Bear Reborn 3, Clipper etc is out

Aurora you should print a giant lithophane.

For big prints this printer would benefit greatly from finding out the actual limits on max flow and acceleration

My Cura does not have the volumetric.

Forget the Hello Kitty army, time for a Helios Kitty army! 🤣

I have always thought that input shaper should be measured at multiple heights, let's hope this becomes standard.

What wheels did you use, and are they lockable?

The orange storm giga just isnt ready yet if it cant go slow and max z height without soooo many artifacts is that the real max z height

Tronxy has a competitor 3d printer in the market.

If the 1mm nozzle maxes out the flow rate then I assume a 0.8 nozzle would print in the same time with a better quality.

If it can do 30mm3 with a 0.4mm nozzle, switching to 1mm nozzle could have dome much more flow i would safely assume 45mm3 or more.

Great review as always! 30mm³/s is rediculously slow for this kind of printer, especially using a 1mm nozzle. Have you reached out to Elegoo?

small spelling error at 11:22 "Prisa XL" should probably be "Prusa XL". nothing major though, great video!

why does a printer of this size have a 0.4mm nozzle??

Actually, I think they should slow down heating of the bed. At least for 115V. Going near the limit of the power you can get from one line isn`t great. Alternativly they should use 3 phases to connect the printer to an outlet for ovens. At my home (in Germany, so 230V) renovating my kitchen I actually used a Perilex plug for my oven (Perilex is a 3-phase+neutral+ground connector for 3*16 Amps, esp for ovens) to be prepared for the future. Even it means to buy takeout food for a few days on a big print, this might be better than to overload your electrical system. For 1mm nozzles: Imho there is one function missing on all modern slicers: Different layerheight for outer layers. Why isn´t it possible to use 0.6mm layerheight for a print, but with printing outer layer first with a layerhight of 0.2mm for theese (so the printer would print 3 outer layers on top of each other, with 0.2mm laayerheight each, than the inside of the object with 0.6mm). This would increase the printing time only for the outside perimeter. But as you only can see the outside layer afterwards anyway, this should improve the quality by a lot. Combine this with variable layerhight to get more detail at the top, and you would get great results with only modare increased printing time. Also this printer definitly needs a toolchanger. Not (only) for multimaterial, but for different nozzle sizes. If - for example - you print a landscape, print the bottom with a big nozzle, but change the nozzle if you go upwards for more details. For the design of the printer: It should be more modular. The base, the top, left, right and back side should be made as seperate parts with each having a few thumbscrews (and of course plugs) to connect them together. So you could assemble and disassemble the printer in maybe 20 minutes (+calibrating after assembly). A printer this size does not fit through normal doors.

Why no mains powered beds? Also 30 cubic millimetres per second is pretty bad if it doesn’t increase with really large nozzles. That’s something I’d change in the settings to see how far you can push it. 60W is pretty small too, considering a 70W heater will fit in a normal V6 heater, let alone something like a volcano.

It's getting to be, how big is to big? I saw the video and with. the clips of you sitting in the printer, that was funny. I know you are not a very big person, but that printer is huge, though, there are bigger ones available at a significant price. Dave

Whats next a 800x800x1000mm Resin Printer by Elegoo YellowStorm Terra? comes in 2x skids . I can finnaly build parts for my EV yeah

Now that this thing has shown up, who has to leave their car outdoors from now on? :)

It’s cool but I don’t think anyone should buy one It just feels like an unfinished product and there’s definitely an early adopter tax. I can’t really think of too many applications where a single large piece would be a requirement that a non giga-sized printer couldn’t handle.

they should have had it have multiple nozzles that can get swapped out, and they needed to have tandem printing in the base modelf or them to have a reasonable upgrade path. to have multiple nozzles able work on the same print they would need the nozzle area to go toward 6 axis, instead of 1. if instead of having a sqware top, they were able to rotate the top, and dropped the head like a crane with a magent underneath the print bed, they could have had a clean and easy upgrade path, but it would cost way more to tack that on after the fact. so i call BS on them upgrading it instead of making a model 2. for customer facing product, you need to make the upgrade path be accessible to the largest portion of the public. once you get near the level of expertise that they would need to be able to design the product to use it, sales fall off.

The price of an error when printing on the whole table, hara-kiri

Someone should design a crane attachment for the hot end and maybe add some arcade controls that send g-code to turn it into a claw machine... just temporarily for fun...

Speed doesn't bother me too much, it's driving the nozzle into the bed that bothers me.

The screen being glued into the housing isn't the biggest deal ever, as I'm assuming if you need a new one they will include the housing also. But it is a huge bummer if you wanted to print your own screen housing to modify the machine. I really would like to see manufacturers get away from using glue on these machines.

I really can't understand why they didn't make it a coreXY

5 kg rolls mandatory, should come with a warning: Will eat all of your printer chow.