Thank you for watching our video. The fault code you refer to is a rich mixture fault. There could be many reasons for this. Regarding your squeaking noise, the fuel pump fitted your vehicle engine is similar to the example shown in this video and can be removed in a similar way for inspection.

every 30.000 should be ok

Thank you for watching our video, if you have replaced the seal for the fuel pump and you think the oil leak is around the high pressure fuel pump area, check the pump and all other engine parts where oil leaks could occur and repair accordingly. e.g. cam cover gasket.

Same here found the solution?

Thank you for watching our video. The high pressure fuel pump fitted to the 1.8 is driven by the camshaft similar to the 2.0. However, it is a different fuel pump and follower to the one shown in this video.

Thank you for watching our video, to answer your questions. it would be worth while checking the fuel pump cam follower as a precaution as a good case of preventive maintenance on your vehicle. The fuel pump retaining bolts have a vehicle manufactures recommended setting of 10Nm which is featured in this video.

Thank you for watching our video. The common fault codes associated with the fault in this video are P2293, P0087 and P1093. P1063 could be related to a fuel sensor issue, it would be recommended to check the fuel pressure to start with to diagnose the issue.

Did you fix the issue? I have the same fault code. I will be replacing the cam follower I don't know if I should also change the sensor?

@@mk5gti yeah I fix it. The Car stall occasionally without warning, very horrible. Found out Engine speed sensor is the culprit and need to replace. Nothing to do with fuel pump. Now its running smoothly. This is the sensor location for my reference. kzfaq.info/get/bejne/f7p4f9aIxp7aYas.html

Thank you for watching our video. Replacing the fuel pump will not cause an issue with perfectly serviceable injectors. However, if the diagnosis of the failed fuel pump is due to internal contamination e.g. metal or engine oil then the complete fuel system requires to analysed to see what is required to be replaced.

@@febi.bilstein ah ty brilliant yea Ihe is a really good mechanic and thus far he didn't mention a catastrophic failure so maybe I've dodged a bullet other than obviously needing the new hpfp, he said the injectors are all working fine so I guess no metal shavings are present, thanks for the reply really appreciate it

Thank you for watching our video. Changing the engine oil is only best practice when replaceing a engine component.

Thank you for watching our video. The high pressure fuel pump camshaft follower featured in this video is a common wear item. The failure rate will vary from vehicle to vehicle. Factors such as regular engine oil servicing will improve wear rate. There was also an update to the follower case hardening to this part which was improved in production in 2007.

Need to prime it I believe using vcds

Thank you for watching our video. To try and reply on the subject of your misfiring engine, this is not easy with the information supplied. A engine misfire can be electrical, fuel or mechanical related and trying to track down this fault can take a lot of time and effort as this is an intermittent fault. All fault codes and data need to analysed and a emission test needs to be carried out. Also when the misfire occurs you need to determine if the misfire happens at idle, under load or cruising. I wish I could give you an easy instant answer, but there are to many variables to give you a simple answer.

febi.bilstein it happens between two and three rpms and idle roughly and shakes between 2&3 rpms besides that's it drives ok but I'm trying to fix it before it gets worst

Thank you for the extra information, but this is only telling when it happens, as I suggested in my last reply this issue needs to be diagnosed correctly and methodically.

febi.bilstein check your coil pack connectors if it’s broken that can be a problem, your spark plugs or coil packs itself that’s what I know lol

Edsel Martinez injector

Thank you for watching our video and your opinion on our disclaimer. Because KZfaq is a form of social media, we are obliged to add disclaimers in our videos to make the viewer aware they require experience and knowledge to carry out any repairs and maintenance on vehicles.