Ender 3 V3 SE - The Best Printer for Beginners (Under $200!?)
Рет қаралды 126,807
Күн бұрынCreality Ender 3 SE V3 SE (on sale for $199): shareasale.com/r.cfm?b=201599...
On Amazon: amzn.to/44bVqCU
Bambu Lab P1S: shareasale.com/r.cfm?b=228215...
Creality K1 Max: shareasale.com/r.cfm?b=237420...
The links in this video description are affiliate links. I may earn a commission based on sales through these links.
Creality have sent printers to me for review free of charge.
My Store: nathansellsrobots.com
Patreon: / nathanbuildsrobots
Discord Channel: / discord
Podcast: www.perfectfirstlayer.com
S Tier Printers:
Bambu Lab P1S: shareasale.com/r.cfm?b=228215...
Creality Ender 3 V3 SE: shareasale.com/r.cfm?b=201599...
Elegoo Neptune 4: shareasale.com/r.cfm?b=235104...
QidiTech X-Plus 3 vs qidi tech x plus x smart x max
Ender 3 Vs Bambu Lab vs Creality X1C vs Ender 3 vs P1S vs P1S
Best beginner printer
A Tier Printers:
Bambu Lab AMS: shareasale.com/r.cfm?b=228215...
Ender 2 Pro: shareasale.com/r.cfm?b=201599...
amzn.to/3s3T6jQ
Creality K1: shareasale.com/r.cfm?b=201599...
amzn.to/47iNx1q
0:00 Intro and Assembly
3:18 Features Overview
7:55 Hotend Disassembly
11:18 Firmware and UI
12:55 Auto Calibration
15:56 Speed and Sound Analysis
21:04 Print Montage
22:34 Conclusion
@nathankean7968 11 ай бұрын
Im so jealous of the new comers to 3d printing. They have it so much easier than we did just a few short years ago.
@NathanBuildsRobots 11 ай бұрын
Back in my day, we had to manually level the bed every time we ran a print!
@seanwoods647 11 ай бұрын
The bed was warped. Uphill. Both ways!
@3DPUK-TECH-CHANNEL 11 ай бұрын
them good old days, to be fair i do prefer some manual interventions still... its all to simple until it goes really wrong. @@NathanBuildsRobots
@OKManNoOne 11 ай бұрын
is it better to start with basic ender 3 to learn basics or is it not impotent when some aspect are automated?
@seanwoods647 11 ай бұрын
If you are starting from no experience at all, and no background in electronics or material science, I'd be careful about which Ender 3. The newer ones (s1 and after) have a lot of creature comforts and better quality control. @@OKManNoOne
@Wilhuff_T 6 ай бұрын
21:10 "Lets listen to the printer" ,proceeds to add some music. Brilliant.
@Almost_Made_It 4 ай бұрын
“Let’s check out the print quality” Proceeds to print way faster than would be typical, doesn’t finish the print, breaks the print, and doesn’t show us the print. Can I have my 25 minutes back?
@seanwoods647 11 ай бұрын
I have to say, having had printers with touch screens and printers with knobs, I find I prefer the knobs. There is something existentially satisfying about something simple well done. It looks like they took everything that was annoying about learning to 3d print, and built something cheap that works out of the box.
@NathanBuildsRobots 11 ай бұрын
Yeah, I'm really excited about this printer. $1000 mega printers are cool and all, but this is, in my opinion, more appropriate for more people, and offers the best value on the market right now.
@seanwoods647 11 ай бұрын
Most of my fun with 3d printing is talking shop with other makers, and introducing new people to the art. A name brand $200 printer that is decent quality and simple to use makes me kind of giddy about the future. That's in the price range of a doting grandparent.@@NathanBuildsRobots
@Trashalchemy 11 ай бұрын
@@NathanBuildsRobots This thing makes the Prusa Mk4 look like even more of a way to part fools from their money.
@seanwoods647 11 ай бұрын
@@Trashalchemy Despite getting my start with Creality printers, there's still room on my shelf for a future Prusa. But more as a "this is a quality device that is a joy to work with" sort of niche as opposed to a "cranking out crochet bowls on Etsy" sort of niche. I really want to own one with the material handler, just so I can do multi-color prints beyond the present techniques I'm using. (Either filament change at a certain layer, or break the model into multiple parts, each with a different material.) I have a book series/tabletop RPG coming out that I want to make miniatures for. And it's a world where ships are held together with moxie and literal magic, so I need different colors and textures to pull it off. Brass plumbing. Stainless steel structural members. Ceramic looking armor plates. Charred engine nozzles. Etc.
@BitterCynical 11 ай бұрын
Same opinion about knob vs touch. The touchscreen fad needs to die. Buttons are far more responsive and reliable. A capacitive touchscreen becomes unusable with a single droplet of water on it and even on my phone which suffers from the "must have zero bezels" fad, just putting one of those soft cases on it makes the screen buggy and unresponsive. Other types of touchscreens aren't any better compared to simple mechanical buttons that can be pressed as many times per second as your fingers can manage. Having to pause even for just a third of a second between each input on a touchscreen is just an annoying worse experience.
@drewmiller9036 11 ай бұрын
$200 is a crazy price for something like this.
@NathanBuildsRobots 11 ай бұрын
It makes a lot of sense though. Printer companies are increasingly starting to build ecosystems where they recruit customers to their banks with good low cost printers the. Hope they upgrade later to high end stuff. At least I think that’s what creality is thinking with this new lineup of an awesome Ender 3 and higher price point K1
@Gripfastvids 11 ай бұрын
I bought this printer and have had it about a week. All I can say being a total rookie is it is easy to print!. With this model I have some of the upgrades and bells and whistles of more expensive models at an INCREDIBLE PRICE! I am already geeking out and looking how I can upgrade my V3 SE...so yeah...if Creality is trying to bring more customers in and and have them spend more money in their "ecosystem" they definitely nailed it.
@TylerLL2112 11 ай бұрын
Wow… I am absolutely blown away for what this offers out of the box for $200! This should help many more newcomers stick with 3D printing and not lose out to frustration.
@NathanBuildsRobots 11 ай бұрын
Yeah, the loadcell in the base is a brilliant little addition, and I’m glad they’ve included it without charging a premium
@officialWWM 7 ай бұрын
Makes you wonder how they make any money out of it!
@ryaninwa5375 11 ай бұрын
I am glad to see you showed the bottom of the printer as that highlights a big reason why they may be able to offer this level of feature at this price point. Where the old printers were assembled within a frame of aluminum extrusions, this is assembled with a few stamped pieces of metal that attach together likely so easily that the process can be automated. I have minor concern over stiffness at high print speeds, but if it can really do 250mm/sec with some quality at any time then I don't mind.
@MrGomeazy 10 ай бұрын
I love these review videos! I genuinely love the bed hair like he just woke up and recorded this video before eating breakfast lol. Keep up the good work!
@mamatuja 11 ай бұрын
"We have our z axis moving up and down." 🤔 That's an amazing feature.😂😂😂
@NathanBuildsRobots 11 ай бұрын
Never been done before!
@Weird-Oh 11 ай бұрын
Thanks for the overview. I’m eagerly awaiting mine to arrive tomorrow! It is my first 3d printer, so I’m glad to see that the ease of setup wasn’t just overhyped marketing.
@ddade11 11 ай бұрын
How was your initial setup and printing with your new Ender 3 V3 SE?
@Weird-Oh 11 ай бұрын
Unfortunately, my package was intercepted before I could get to it. Thankfully Amazon is sending a replacement, but it won’t arrive until Sunday. I can’t wait to get it going, I’ll let you know how it goes once it arrives.
@bizarro_bread 10 ай бұрын
@@Weird-OhLet me know if it’s worth!
@crich1218 8 ай бұрын
@@Weird-Ohhow did it go?
@GlassCanvas 11 ай бұрын
I got the printer 4 days ago and it is awesome. Very nice prints about 2-3 time faster (According to slicer programs) than prior ender machines. Auto Z offset and leveling. is great. Very pleased with it.
@VektorVirus 11 ай бұрын
This is better than the K1 I returned 😅
@Trashalchemy 11 ай бұрын
What kind of slicer settings/profile are you using?
@marcello8176 11 ай бұрын
printing speed? Inside/outside wall speed?
@GlassCanvas 11 ай бұрын
@@marcello8176 using Creality Print defaults. Print speed 180mm/s. Outer wall 60, inner wall 90
@GlassCanvas 11 ай бұрын
@@TrashalchemyI posted an answer but I don’t see it
@shrug53 10 ай бұрын
Thank you so much for such a clear and honest review. I am ordering one of these today!
11 ай бұрын
Your videos are great, i watched almost every single one from past year and would watch them again, simply for your pronunciation of word machine :)
@3D_Nexus 11 ай бұрын
Interesting Printer - Thanks for the reveiw
@4dspice 11 ай бұрын
Finally a printer absolutely worth shilling for!!
@anarekist 10 ай бұрын
def want one now, and retrofit the older ones with these new ideas
@jamisonlm3 11 ай бұрын
It does look like a fairly solid little printer for them money. Looking forward to the next video to see what it looks like under the bottom panel. On a side note, the bamboo labs screen looks like they stuck a mid 2000s mp3 player on their printer.
@NathanBuildsRobots 11 ай бұрын
Lmao pre-iPod, pre-zune. It’s really kind of insulting for them to put such a cheap screen on there
@ThantiK 11 ай бұрын
Nice well balanced first look at this machine.
@MKS_Design 10 ай бұрын
now we need the all metal hot end/extruder upgrade video for the new ender3. thanks for the review.
@wfldfire 3 ай бұрын
I picked one up as my first printer. The first one had some firmware issues and the SD slot was broken. So after about a week of printing I returned it. The second one was great. Everything I wanted in a beginner printer. I've put about 3 kg through it with very minimal maintenance. Still learning but I'm delighted.
@GlassCanvas 11 ай бұрын
Nathan, Thanks for the review. If you can, can you please look at adding a runout sensor, perhaps using a WIFI SD card (All I want is to upload files, nothing else) and what the USC-C is for. It's my first 3D printer. I did quite a lot of reading and KZfaq reviews including your channel. It really helped.
@TheNewBloodDan 8 ай бұрын
The relocation of the x limit switch gave me an idea for modelling a mount on my printer!
@aberodriguez4149 11 ай бұрын
Nice review and the assembling process much more user friendly for a beginner. I did not see a filament run out sensor if one was to add it would it take the user to do some complicated software tinkering, a true beginner would mostly shy away from this. Thanks for sharing this is quite impressive, happy testing.
@jeremiahjessel6174 8 ай бұрын
Great review! Thanks!
@TheWhitde 11 ай бұрын
great review dude... much appreciated. Very clear... no useless padding. I have original Ebder 3 with Lerdge MB replacement. Thinking of getting one of these to replace it and salvaging my Lerdge MB for my old up 2 Plus. Big seller with this for me is the much smaller footprint and cable management. Also the self leveling looks great. Not having to mod a new machine out of the box is a huge thing. Screen looks great.
@TBerq 11 ай бұрын
Thank you for the review. Can you compare this printer to Elegoo Neptune 4 for a beginner?
@btschuster04 10 ай бұрын
How easy or difficult would it be to add a filament runout sensor to this? Is there a spot on the mainboard for the sensor to plug in?
@marcello8176 11 ай бұрын
Thanks for the great review man, but i have a question, can u change the ptfe tube inside the extruder with a capricorn ? I'm using the capricorn ptfe on my ender 3 neo and i'm able to print also in ABS very well
@Mrdsmith500 6 ай бұрын
Great review.
@jeremygalloway1348 11 ай бұрын
Nathan, yes...time for modder board v2(maybe an easier to keep up with name...MB V3 for the SE). I just got into 3d printing about 2 weeks ago, with a 3 S1...and your channel/work is among my favorite. With this printer, entry into 3d printing will be easier on every level, every aspect. Less expense, easier setup, smaller form factor...while still being moddable for folks that are wanting that. All great for kids(and parents footing bill for the learning/experience). All of those points means more desire for your modder board. I picture these in schools more frequently, and your modder board is a perfect learning aid for those who dont know soldering and component selection/hookup. Easy peazy. So yes please get back to the drawing board! Keep up the good content!
@gavin1215 11 ай бұрын
Ordered one from Creality directly. Hopefully it ships soon.
@NiallDeBarra 10 ай бұрын
Looking forward to seeing how you improve the hotend/heatbreak
@Martin-bx1et 11 ай бұрын
Given your comments on the ptfe hotend and inadequate parts cooling it would be very interesting to see a comparison with the Sovol SV07 (especially with the wifi, independent dual Z drive and klipper). I have an original Ender 3 and am generally happy with this style of printer but I would really appreciate a greater turn of speed either of these two machines promise.
@seanwoods647 11 ай бұрын
I think Creality already has a partial answer to that with their Sonicpad. Rather than add a brain and smart screen to each printer, have one nice brain and smart screen that can run 4 printers. I'm running one now for my Ender 3 pro and my 5 S1, and I'm really enjoying having a drop-in Klipper implementation for both.
@TheImprovisations 10 ай бұрын
How does the Anycubic Kobra 2 Neo stack up to this? It has the PEI bed plate from the start and is a little bit cheaper than this. What it does seem to lack is the fancy extra threaded behind the frame post for it to climb up and down in the Z-axis.
@IronWolfStudio 10 ай бұрын
so the stock e3v3SE has full auto bed leveling auto z offset and direct drive so the question is what will the e3v3SE max/pro/plus will have ? at this point only upgrades to the printer would be making e3v3SE max have a touch screen and maybe 2 motor for z axis or complete switch for linear rails on all axis (very unlikely) any idea what they might change in the max/pro/plus variant if one was to be made in the future?
@Leviathan3DPrinting 10 ай бұрын
Would you mind doing a teardown of how the X axis is put together on this machine. I have been unable to find any photos online of how the belts are routed and it looks like a really cool design. I'm always a fan of your deep dives into each printer you show on the channel. It helps me to learn more about different engineering concepts and implementation. Keep it up! ❤
@crnalajna 11 ай бұрын
I bought it few days ago and hope it will arrive soon but still waiting for your second and real print review Nathan, and disassembly :)
@atlasvibes969 11 ай бұрын
Why wouldn't you recommend a ender for a beginner? Care to explain? What do you recommend?
@marutiroma6295 11 ай бұрын
Hi Nathan, thanks for your professional video as always! Can you tell me what the maximum noise level is? It's very important for me. Until next time!
@jacksonstiller8894 11 ай бұрын
I have this thing and I love it have not had any problems yet
@adelhied034 11 ай бұрын
nice review. love that noice level but the part cooling fan is less to be desirable running that 250mm/s
@NathanBuildsRobots 11 ай бұрын
Yup, definitely could use a fan upgrade. Its stock config is fine and usable though.
@SamMG23 10 ай бұрын
I got one of these and I am struggling Immensely with the gantry not being level. Because of the custom profile they have designed there is no way to add a gantry stabilizer like in the earlier ender 3 models. Also, the way the gantry connects to the base allows for no adjustment its either tight or loose which means you cannot level the gantry. It’s a great printer in every other way but if you have this issue it just stops any prints from being accurate. If anyone knows how to fix this issue, I’m all ears?
@lrochfort 6 ай бұрын
How does this compare to the Flying Bear Ghost 6? Does the CoreXY setup there offer an advantage that outweighs the bed level and z-offset features on offer here?
@nyox999 11 ай бұрын
been waiting for a printer forever, was just about to buy the ender 3 v2 when I saw the SE got released. Directly bought it for 200€
@andrewusenko6326 11 ай бұрын
Hi. Saw some of your videos with printers for beginners. What to ask, what will be better Elegoo Neptune 4 or Ender 3 V3 SE?
@KensCounselingCouch 11 ай бұрын
@NathanBuildsRobots I've been trying to figure out if there is a way to install my own load cell on my 3v2 & e5pro & what changes I would have to do in Marlin configurations to get it to calculate the z-offset. I've tried finding mods and other people using it, but i have only found it being done for regular bed leveling like the Cr6se, not for z-offset like here. If you or anyone has any insight if this can be done, I'd greatly appreciate it. Great video! Might end up getting this as my next budget 3d printer while i wait to get a K1!
@manish17788 8 ай бұрын
Which option is better ender v3 se for 242 CAD or bambulab a1 mini for 389 CAD?
@TimoWolle 8 ай бұрын
Would you buy the Neptune 4 pro für 260€ or the ender 3 SE for 197€ or ender 3 KE for 299€?
@carter240 11 ай бұрын
I’ve had my since 2021 and have loved it. I didn’t know anything about printers and lucked out with the most modifiable one on the market. I hope the v3 is the same way, Creality’s new gen printers seem to not have as many options as the 3 and 3v2 though. The way I see it, the E3V2 is a Toyota Supra. Slow (by todays standards) and boring but once you mod it a little it really becomes a great printer. I haven’t had to touch my bed leveling knobs in over a year. I set the mesh and left it. I can literally hit print and come back to a finished model. I’m shopping for my next printer (~$1500 to spend) and I’m hesitant to buy anything fancy. The Ender has treated me so well I have entertained the thought of buying 1 or 2 more E3V2’s, duplicating all the mods so they’re all the exact same and calling it a day. 3-4 finely tuned Enders will surely print faster than 1 P1S or K1 Max…right? …Right?
@NathanBuildsRobots 11 ай бұрын
I’ve been thinking about what 4 of these Ender 3 V3 SE running off a single sonic pad would look like. I don’t need that many printers but it would be pretty inexpensive and have huge output
@tomri2251 11 ай бұрын
my brother got rid of 5 ender 3s to replace them with one Bambu Lab x1cc and he said it’s great so far
@lucasxia2232 11 ай бұрын
Nice video ! I'm new to 3D printing and was wondering if Creality ender 3 v3 se is better than elegoo neptune 4, what's your opinon on it ?
@R.B_B 9 ай бұрын
The PTFE tube in the extruder. Can be changed to other material to print PTU, ABS and CF?
@lifeinthefishbowl 11 ай бұрын
Ordered mine on the 14th. Hopefully it comes in a reasonable time. 🤞
@user-zq4xk1dm6n 11 ай бұрын
What kind of PLA is that ? I'm considering placing an order for this machine as well as some extra PLA - but i see they sell Hyper PLA as well as Ender PLA - what to go for and will anything do the speeds shown here ?
@Pugwash. 11 ай бұрын
It looks like some good improvements. I still have my E3 V2 but recently bought an Ender 5 S1 slightly cheaper than creality are now offering it in their sale.
@seanwoods647 11 ай бұрын
How are you liking the 5s1? I've had one for a few months now. And despite expectations, my 3 pro is STILL my goto machine. The 5 makes a lot of impressive noise, and throws itself around hard enough that I've had to lay it on the floor. But for all that "speed" I ended up having to run it at basically the same levels as my 3 pro to get equivilent quality. Even after switching to Klipper and the Sonicpad. The taller gantry is nice for when I want to fill the plate with copies of a print I want to produce one-at-a-time. There is also one skyscraper I sell on Etsy that really never printed well on a bed slinger.
@Pugwash. 11 ай бұрын
Love it. @@seanwoods647 I did install Klipper and fit a 4.3" klipperscreen into the now-dead screen location but otherwise finding the stock mechanics all good.
@matthewsmedley2521 11 ай бұрын
Does anybody know if there is compatability for a runout sensor?
@SeenAndCheese 11 ай бұрын
In regards to your steel reinforcement video, I think you need to do a feasibility test where you make multiple handles with varying numbers of sheets of reinforcement. You may be on to something but will never know for certain if your amount of reinforcement is below what makes this viable. Ex: currently, you have one layer of reinforcement per 10 layers, but does changing to per 7 layers or per 3 layers make it stronger? I believe it would although there will be a point of diminishing loss there as well.
@d.jensen5153 11 ай бұрын
So the test gcode file (the cat) had some insane linear speed specified and left it to the printer and printer settings to determine the actual speed used?? Or does the speed setting in Cura slicer not actually influence anything?
@GlassCanvas 11 ай бұрын
Sensor-less homing bangs and stresses the mechanical parts and puts more electrical load on the drivers. It's actually a cheap way to do things and less reliable. I prefer the limit switches.The two screws go on the top of the machine at the bottom of the right Z axis bracket - Loosen all the screw put the two screw in and then tighten them in sequence so it all seats properly.
@petadang 10 ай бұрын
As someone whose looking to get into this hobby. Would the ender 3 neo v2 be a better option or this new 3v3?
@Rubicon2024 11 ай бұрын
Hey im a beginner in printing and I currently have a ender 3 Neo but it has so many problems that I simply can’t handle due to me being a beginner and looking for a new printer and was thinking about this one just wondering what u guys think.
@Kinsfire 9 ай бұрын
Have you had a chance to work on the deeper dive into this machine? I like the machine, but am thinking of converting over to Klipper on it.
@user-sn5yv9ke8f 11 ай бұрын
I got my s1 for $200 at micro center when they had a sale, works great
@mattkon1808 9 ай бұрын
Hi, can I ask you which one is better, this one or anycubic kobra 2 2023?
@lifetech101 11 ай бұрын
How flat is the bed? I know it is compensating with the auto leveling but just curious.
@ImSoMagic 11 ай бұрын
Really interesting! I like the Z auto offset and the minimalist design, I almost regret preordering my Neptune 4 pro.
@NathanBuildsRobots 11 ай бұрын
Neptune has more advanced features and klipper, both are great value, this one is just cheaper and a little more stripped down.
@atlasvibes969 11 ай бұрын
@@NathanBuildsRobotswhich would you recommend? Ender 3 v3 se or neptune 4 pro?
@joeking433 11 ай бұрын
You made the better choice.
@ilikecringe 8 ай бұрын
@@atlasvibes969 Neptune
@Trashalchemy 11 ай бұрын
I clicked buy so fast. Gonna test this out in the farm, and I honestly expect it to be my new go-to. So sick of having to mod the heck out of kingroons and e3v2s to get them to this spec, and this just comes the way I need it for way less money? Take it all.
@JamStph 9 ай бұрын
The only question that I have is, when are they going to have a profile on the sonic pad for it?
@Wetmonkie 7 ай бұрын
I cant find the V3 SE in cura?!? How do I make a profile for it
@basileus9343 11 ай бұрын
Just a fresh Ender 3 S1 owner here coping for an automatic Z offset retrofit for my printer to be available in the future
@Trashalchemy 11 ай бұрын
RIP :(
@NathanBuildsRobots 11 ай бұрын
Ender 3 S1 wonder got done dirty
@FPRua 8 ай бұрын
Besides the prices, what printer do you recommend between Ender 3 V3 SE an Ender 3 S1 Pro?
@lolyouwontfindme6070 10 ай бұрын
I’m thinking of buying this one soon, it’s a great bang for the buck, and it’ll go nicely with my bambu labs p1p, my bambu labs is in the office but I’m thinking this one would go nice in my bedroom on top of my mini fridge lol, I currently have an Ender 3 (an original one not an S1 sadly) on top of my mini fridge and I spend more time fixing the damned thing rather than printing, I was thinking of replacing it with a Ankermake M5C, but now that this came out? I think this will be my replacement for the old Ender 3 lol
@xixRaviinxix 9 ай бұрын
I need to replace my Hotend on mine as well as the connectors any ideas?
@calpin_dk 10 ай бұрын
Just discovered your channel and thanks for the excellent overview and reviews of the various 3d printers. I'm new to the world of 3d printing and I'm looking to purchase my first machine. I've looked extensively on the Ender 3 S1 Pro which is kind of my budget limit but now I found this video :). I don't mind tinkering with stuff and I have an old Shapeoko 2 CNC machine which I've had great success with. That said, as I'm getting older, I just want to stuff to work without too much hassle. Is this printer something you would recommend? (I would think so based on the title of this video)
@knzmc 9 ай бұрын
Maybe this reply is coming too late, but I am also new to the world of 3D printing and have decided to get this machine even though I could afford something more expensive. I've spent hours looking at reviews and the Ender 3 V3 SE is getting really consistent great reviews. And I figure it's less risky of a commitment if you're unsure exactly what you'll want to do, and how much time and effort you will spend on the printing :)
@calpin_dk 9 ай бұрын
Thanks for your reply and no, it’s not too late as I haven’t bought anything yet :). I’m going to hold off getting a printer until the end of the year. I’ve found the Ender 3 V3 KE quite interesting as well. I’m even considering a Prusa MK4 but that’s in a totally different price range. Enjoy your V3 SE :)
@windysynth 8 ай бұрын
Can this print flexible filaments? (Great video, thank you so much!)
@frankhovis 8 ай бұрын
Does it take a USB flash drive? I've not seen any other review mention it can.
@glenelkenfarm5577 9 ай бұрын
Can you do a video on how to successfully do a colour Filament change mid print? Thanks!
@itzdeniedbeastmode9 11 ай бұрын
Iv literally straight up gave up on my anycubic kobra neo and got one of these coming tomorrow because of the amount of problems its got its crazy and its meant to be brand new turns out the psu blown in the 3d printer and its also got really bad z wobble so im discarding the anycubic kobra neo for this beast cant wait to test 🙃
@sjlyons50 11 ай бұрын
Double check the hotend for PTFE lining. My E3 S1 was supposed to be PTFE lined, but for whatever reason, it wasn't - discovered when I replaced the hotend for a new all metal one.
@shenanigans8apeach 7 ай бұрын
Where the fk you get an s1 for a $150¿
@sjlyons50 7 ай бұрын
@shenanigans815 the comment was in regard to the sprite extruder Nathan mentioned this printer comes with, as this is also in the S1 printer.
@matthewturner7143 10 ай бұрын
So I just this week bought a ender 3 pro on Amazon for 219. Now this ender 3. Version 3 SE is also listed on Amazon for 219. I'm assuming I should return this ender 3 pro and exchange for the V3 SE correct? Or Am I missing something?
@DouglasFish 11 ай бұрын
My 3s1 on sale at $150 sounded insane. This at $200 MSRP? wow!
@kilianlindlbauer8277 11 ай бұрын
Pretty impressive pricing and feature wise very similar to a anycubic kobra 2 (auto z, two leadscrews and one stepper, quick, marlin based machine). I think this could even replace the 100 dollar microcenter ender 3p with the features given. Are the bed bearings greased? They sound a bit grindy. Really good job on the overall design, making it more compact with the changes they made. Im curious what Mainboard creality has put in and if they finally managed to make one with uart/spi drivers, since the microstepping sounds a little rough just like on the kobra 2. I also got one for the screens: Creality: puts on really nice screen on 200 dollar machine Bambu: puts on crappy screen because user aren't using it anyway. Meanwhile the ankermake m5c: no screen, so people cant complain about bad screens
@NathanBuildsRobots 11 ай бұрын
Lol. Bearings were pre-greased. I’m betting the Mainboard is the same as the Ender 3S1, but I really should open it up and take a look. Wouldn’t be surprised if they made some minor changes
@seanwoods647 11 ай бұрын
My kids still call my Ender 3 pro "squeaky". When I started 3d printing, it sounded like someone was drowning a robot in my office. At this point it's still my go-to printer. Of course it's more mod than factory at this point. The Printer of Theseus.
@rohitppatil 10 ай бұрын
How does this printer compare with the Ender 3 S1 Pro?
@sierraecho884 11 ай бұрын
I really like what I see, the design choices are really well calculated. No double Z motors which nobody needs anyways from a design or engineering point of view. Keep it simple, small and cheap. I like the PTFE lined hotends since it´s not an exlosed printer and they are way cheaper and easier to handle they also print way better PLA & PETG. Part cooling sucks and cold end cooling sucks. 30mm fans are simply dumb. Soo small and loud. My question would be, does it run the same software as the Elegoo 4 does ? Is it fast ?
@NathanBuildsRobots 11 ай бұрын
Neptune 4 is running klipper, and I believe this is running marlin. It's not AS fast as the Neptune 4, but for the price reduction, I think I'd be tempted to go the Ender 3 route. Plus the modding scene is going to be crazy for these machines as always.
@sierraecho884 11 ай бұрын
@@NathanBuildsRobots Yeah, IDK. I personally would prefer Neptune 4 in this case to be honest. Price is very similar and I want a printer with pressure advance etc. to improve print quality a little further. The speed advantage is also great. However you are right the price to performance ratio is great and the auto Z calibration is also great, way less hassle.
@erikvf7 8 ай бұрын
Ender 3 v3 or KP3D Pro S1, despite the auto leveling?
@peterstoltz3296 9 ай бұрын
I have seen these videos couple of times now and I have just started to 3d print I bought a ender 3 v3 se because of this video so one question I got about the printer, can use a c cable to my laptop to send prints to the printer from my laptop ??
@Impuritan1 5 ай бұрын
Did you ever figure this out? I’m wondering if you can and use OctoPrint to control it.
@DrFod 11 ай бұрын
I wish I had waited for this instead of getting a V2 Neo two months ago. Cheaper, faster and easier to setup and manage makes it a no-brainer over the other Ender 3 models.
@cabbagebap350 11 ай бұрын
I’ve just sold my v2 neo to buy this until I can afford a Bambu lab p1s I’m currently waiting for the delivery and I’m very excited
@petadang 10 ай бұрын
What's makes this new unit better than the neo v2? Debating on getting the neo but just noticed the new v3
@shenanigans8apeach 7 ай бұрын
I can't stand creality for this. So fkn confusing.
@pbft.j 11 ай бұрын
I'd love to toss Klipper on this baby. Would love a head to head comparison with the Ender 3 S1. The bed leveling is nice but I'm wondering if there's anything the S1 has that this one doesn't. Maybe the S1 can be modded a bit easier? (we'll see)
@NathanBuildsRobots 11 ай бұрын
I think it would be a killer farm setup to get 1 sonic pad and 4X of these Ender V3 SE Could all be had for under $1000
@artvist1438 11 ай бұрын
I NEED AN URGENT ANSWER! I pre-ordered the Ender 3 V3 SE a few days ago. The printer will reach me on September 25-30. Before ordering this printer, I was planning to buy the "Eleego Neptune 4/3 Pro" printer because its price seemed excellent compared to its competitors. The thing that kept me from buying Eleego Neptune 4/3 Pro was that users on the internet had a lot of problems, but for some reason it made more sense to buy now. Do you think I should return the Ender 3 V3 SE I bought?
@NathanBuildsRobots 11 ай бұрын
No, Ender 3 V3 SE is a good printer
@aldozamora1289 11 ай бұрын
Can you test if you can use Klipper via USB and a computer for us? I’m in between this and the Neptune but if this can run klipper via usb I think I might get this
@NathanBuildsRobots 11 ай бұрын
Will look into it. I'll bet they planned on having this be Sonic Pad compatible, so they plan on the USB-C being a serial port.
@YoSpiff 11 ай бұрын
I'm curious how they are doing an automated Z offset. ETA: It appears that when the nozzle contacts the bed, it senses the extra torque on the motor so knows the nozzle has hit the bed.
@NathanBuildsRobots 11 ай бұрын
There is a loadcell at the front right corner of the bed. It’s the same thing that is used in a kitchen scale
@jericho347 8 ай бұрын
Do you have any guides I'm curious about the slot on the board labeled led
@whatisyouremailid 11 ай бұрын
Is the breakout board on the extruder the same as the Ender3 S1 Pro?
@SlippingFlipping 11 ай бұрын
NOW I KNOW! Thank you for the video but my 1st printer just a month ago is a ender 3 v2 neo (whatever neo is), and I will never buy another ender now knowing what I know now. The new v3 look like ankermaker M5C but in a mini version. I'm guessing v3 neo will be bigger and still little cute. edit: love how you tell it like it is tho! BL touch and no manual bed level? Ender users know how important just manual bed level is.
@garydurn7983 10 ай бұрын
Big thanks for this. It sounds like just the machine for my next production batch. Did you settle on some speed settings that optimised speed? Cheers
@NathanBuildsRobots 10 ай бұрын
I haven’t printed with it too much, it’s taken apart and I’m working on some custom mods that I’ll share later. But in terms of speed, there should be decent profiles for it out there
@garydurn7983 10 ай бұрын
👍👍@@NathanBuildsRobots
@ksavage681 11 ай бұрын
How many iterations for them to get it right? This one is still missing touch screen and filament sensor. For 50 dollars more, get that other printer with those features and Klipper too.
@NathanBuildsRobots 11 ай бұрын
You don’t need any of those features, and this is less expensive
@hatorihanzo3431 7 ай бұрын
Does the quality go down the faster it goes?
@MrBaskins2010 11 ай бұрын
willl wait for the max version to drop, i smell the liquidation of S1s in the future to hopefully simply the lineup
@NathanBuildsRobots 11 ай бұрын
Knowing creality... They will keep selling all the prior crap even though it doesn't make sense. It's a basic theory in retail. Offer a bunch of choices, assuming people select them randomly you capture more $$$. Smart/price conscious consumers will buy the higher value/cheaper stuff at the lower price points, but for every person that makes the "mistake" of buying the non-optimal option, that is more money in your pocket. Sad but true state of affairs. Just look at your ketchup options next time you're at the grocery store.
@seanwoods647 11 ай бұрын
@@NathanBuildsRobots Our local Microcenter has several aisles of 3d printers, accessories, filaments, etc. And it's not as well organized as the condiment aisle at my local supermarket. I have to check if they finally sold the pile (literally a pile) of Ender 3 pros that they kept marking down. Of course the reason for the chaos is a steady stream of consumers... so they must be doing something right.
@zombiehunter1152 10 ай бұрын
It’s a nice looking printer
@shrug53 9 ай бұрын
Question, even if I set my slicer at 200mm/s it only seems to print at about 100mm/s. The only way I get the higher speed is by using "tune" on the screen. Am I doing something wrong in the Creality slicer or is that just a default? Will I always need to use the screen to get the higher speeds? Thanks
@NathanBuildsRobots 9 ай бұрын
Creality print is good but ☝️ have noticed there are some settings are defined multiple places You might need to check filament settings and print profile settings
@MrTurtlefan2 10 ай бұрын
I will order this version when Black Friday/Cyber Monday, comes around. maybe sooner
@parkergallinger4165 11 ай бұрын
which is better, this or the neptune 4 pro?
@LinayatIlyas 7 ай бұрын
What do you think between this and the Kobra 2 neo?
Major Hardware
Рет қаралды 33 М.
Aurora Tech
Рет қаралды 49 М.
MaviGadget
Рет қаралды 1,5 МЛН