Engraving large items

Рет қаралды 19,624

Жыл бұрын

My latest method for securely engraving oversized items with the XTool D1. I use an existing jig to create the most secure method yet. Although the jig modification does require some tools, it is very useful for oversized pieces. The sculpfun enclosure was donated to me for a previous video, at that time I wasn't sure if I had a need for it. I finally put it to work.
For templates that I have made, check out my Etsy shop. I build files for projects and tools for the XTool D1.
www.etsy.com/shop/TheClackShack
The links below are affiliate links that will direct you to the product in this video. If you use this link for a purchase, I will receive a commission from the purchase. I remain unbiased and honest in my assessment as always.
XTool Website
www.xtool.com/?ref=TheClackSh...
Amazon links
D1 bundle that I have on Amazon:
amzn.to/3sJRPMC
Sculpfun laser enclosure
amzn.to/3RlQdTV

Пікірлер: 50

@teresa6775 7 ай бұрын

You do SO much and spend SO much time teaching and showing others how to use their engravers...and you do it all expecting nothing in return. Kudos to you and thank you !!

@TheClackShack 7 ай бұрын

You are so welcome!

@fjrempel Жыл бұрын

Was looking forward to seeing the finished project. Really enjoyed the video - thanks.

@TheClackShack Жыл бұрын

Glad you like it..

@AlienLeader4 Жыл бұрын

Thanks for all the information. keep up the great work.

@TheClackShack Жыл бұрын

Thanks, I enjoy the opportunity

@rebeccacaron8982 Жыл бұрын

Thank you….I have a new XTool pro and I’m learning how to use it….👏🏻👏🏻👏🏻

@TheClackShack Жыл бұрын

Hope you enjoy it.

@highperformancebassboats Жыл бұрын

Thanx for sharing. I'm learning a lot from you!

@TheClackShack Жыл бұрын

Thanks for watching. I am glad it helps

@jefferymccaleb7536 Жыл бұрын

Great video and knowledge! Thanks

@TheClackShack Жыл бұрын

Thanks

@gerritgeldenhuys2763 3 ай бұрын

Never heard of a stove cover before.

@TheClackShack 3 ай бұрын

I sell lots..

@jlathem56 Жыл бұрын

Cool project. And it's nice to hear another Alabamian's accent. I guess it's been too long since I have been home.

@TheClackShack Жыл бұрын

I didn’t know I had an accent…lol

@jlathem56 Жыл бұрын

@@TheClackShack - LOL. I am from Alabama too and I didn't realize I had one too until I moved to Illinois for 8 years. There must have been 1 or 2 people a month ask em where I was from because they couldn't place the accent. Lol

@jesgonzalez1986 Жыл бұрын

I really enjoy your videos and have learned a lot! However I've never worked on ammo cans. What would you recommend as far as settings using the 10watt?

@TheClackShack Жыл бұрын

They engrave very similar to a tumbler. I run 60mms at 100%

@jesgonzalez1986 Жыл бұрын

@@TheClackShack thank you! Is it just one pass?

@TheClackShack Жыл бұрын

@@jesgonzalez1986 , I ran 2 just to be sure all of the paint came off

@jesgonzalez1986 Жыл бұрын

@@TheClackShack Copy that. Thank you sir.

@neilberkeley5469 Жыл бұрын

Great video as usual What are your preferred setting for pine boards for a nice deep engraving? Thank you

@TheClackShack Жыл бұрын

With my 10 watt, I run 40mm/s at 100%

@neilberkeley5469 Жыл бұрын

@@TheClackShack thank you 👍

@debschoen5581 Жыл бұрын

Great show!! Say how long till Maymay's ink bandit be made to buy? It looks awesome!!!

@TheClackShack Жыл бұрын

Very soon!

@geraldlamothe6091 Жыл бұрын

Nice job...If you put a wood sealer before staining you would get a more even coat over your work piece...Cheers!

@TheClackShack Жыл бұрын

The variations in the grain is what they love. Apparently without it, it doesn’t look rustic… That’s the way they like them.

@geraldlamothe6091 Жыл бұрын

@@TheClackShack All I can say is...Keep giving them what they love!!!In my part of the world they like the modern but still rustic look...Meaning they want it all even, with a rustic look...I prefer your way but, it does not sell well where I live...

@mape556 Жыл бұрын

Hi Clack Shack, Do you know how to lower the xTool D1 diode lower than the lowest setting? I have a smoke enclosure that raises the D1 by 4.77mm (3/16 inch) which means if I try to laser a large item by sitting the D1 inside the enclosure on top of what I need to engrave, it's 3.55mm (3/64 inch) too high when the D1 is in the lowest setting. Any suggestions?

@TheClackShack Жыл бұрын

You could shorten the legs or bring the work surface up.

@lorenzorivera6612 7 ай бұрын

Really hoping you could help, why does my d1pro 20w onky allow me to cut items around 12"x12"....the size of the honeycpmb is 24"x24' but i can use that area for some reason. Any help would be greatly appreciated

@TheClackShack 7 ай бұрын

What software are you using?

@TheClackShack 7 ай бұрын

message me here so I can send pics and we can correct it. KZfaq isn;t really set up for messaging

@jakerazmataz852 Жыл бұрын

Is your air assist strong enough to blow off the work?

@TheClackShack Жыл бұрын

Not sure I understand the question. It does not move the workpiece if that what you mean.

@pattimaystone8953 Жыл бұрын

I want one of Maymay's Ink bandits! When can we order them???

@TheClackShack Жыл бұрын

They are coming.. She hit me at a very busy time. hopefully soon. Thanks

@Silentcriessouthtx Жыл бұрын

Hey, I am doing a birch square drum. Laserbox. Any help? Really don't wanna mess this up for the client.

@TheClackShack Жыл бұрын

Take your time, I have engraved some really expensive pieces and it is nerve wrecking.

@torowazup1 Жыл бұрын

👍🏼👍🏼👍🏼👍🏼👍🏼👌🏼🍎😎

@TheClackShack Жыл бұрын

Thanks.

@torowazup1 Жыл бұрын

@@TheClackShack left you a message on Etsy.

@Eric-bh6ie Жыл бұрын

we call it 'cut throat's" where I'm from lol js costumer's looking for a product will pay for it regardless. so why cut urself short? you'll just find urself working more and harder. no offence bud

@TheClackShack Жыл бұрын

Not sure what you are talking about but ok..

@gilbertboyer9936 Жыл бұрын

Yak yak, waffle waffle. Man this is not a good video. We've seen everything but engraving a large item. We've seen woodworking and mostly your back. Please bud, a word of advise, please look at how some of the other guys do a video presentation. A good example would be Paw Paw's workshop. He is focused, precise and to the point. Sorry for the bad review.

@TheClackShack Жыл бұрын

I do me, sorry you don’t like it.