Epoxy Floor Coating Over Plywood Subfloor (Amazing Result!)

Рет қаралды 575,447

Күн бұрын

🧰🛠 Tools and Materials Used: amzn.to/3yCdRTY
Learn how to apply an epoxy floor coating over a plywood subfloor with this DIY epoxy floor coating installation!
I applied a metallic epoxy floor coating over my shed's plywood subfloor but this same application method can be used for any plywood subfloor (bathroom, bedroom, basement, etc.).
Below are the steps you will need to follow to effectively apply an epoxy flooring system to a plywood subfloor.
00:00 - Introduction
00:32 - Prepare the Plywood Subfloor for Epoxy Application.
01:28 - Select Epoxy Floor Coating System and Products.
02:10 - Fill all Plywood Gaps, Cracks, etc. with Epoxy Crack Filler
04:39 - Apply Flexible Epoxy Primer
07:24 - Apply Waterborne Epoxy Primer
09:14 - Prepare and Mix Epoxy Color Pigments into Epoxy Resin
11:50 - Mix Part A and Part B of the Epoxy Floor Coating System
13:12 - Apply Epoxy Coating to the Plywood Subfloor Application Area
14:50 - Apply the "Accent Color" Epoxy (if applicable)
17:25 - Apply Protective Urethane Top Coat (Optional)
19:27 - Finishing Touches
I am super happy with the Epoxy Floor Coating result I achieved within my shed. It completely transformed the plywood subfloor into an eye-catching and durable shed floor.
Get the Shed Plans and Course Materials! ⬇️
bit.ly/3PeKr4V
For additional information on applying an epoxy flooring to a plywood subfloor, check out my blog article linked here: atimprovements.com/epoxy-on-w...
In addition to the tools linked above, here is the Epoxy I used:
1. Drill: amzn.to/3JICKkk
2. Drill Mixer: amzn.to/3CcVtlT
3. Latex Gloves: amzn.to/3fQIE9t
4. Painter's Tape: amzn.to/3T4K5Q4
5. For the Epoxy Products Used, check out my Blog Article (atimprovements.com/epoxy-on-w...) and www.spartanepoxies.com/
Check out my other videos in the"Modern Shed Build KZfaq Series".
Introduction to the Modern Shed Series: • I Transformed my Shed ...
Shed Foundation Options: • Shed Foundation Option...
How to Build and Frame a Shed Floor: • How to Build a Shed Fl...
How to Frame Shed Walls: • How to Frame Shed Wall...
How to Frame a Shed Roof: • DIY Shed Roof Framing ...
How to Install Shed Siding: • How to Install Shed Si...
How to Install Shed Sheathing: • Shed Sheathing Install...
How to install Shed Trim: • How to Install Shed Tr...
Inexpensive Shed Window Option (Acrylic): • Inexpensive Shed Windo...
How to Install a Shed Window: • How to Install a Shed ...
How to Install Shed Siding Veneer: • LVP Flooring as Shed S...
How to Install a Roll-Up Door: • How to Install a Roll ...
How to Build a Shed Ramp: • How to Build a Simple ...
How to install asphalt shingles on a shed roof: • How to Install Asphalt...
How to Add Electricity to a Shed: • Shed Electrical Instal...
How to Organize Your Shed Storage: • Shed and Garage Storag...
Be sure to subscribe and hit the notification bell so you don't miss any videos in the Modern Shed Build Series!
If you want to learn how to build the EXACT shed shown in the video, I put together "The Modern Shed Build Course" (bit.ly/3PeKr4V) which includes a materials list🧱, tools list 🛠, and cut list 🪚for each step of the entire shed build process. Basically, this course makes it feel like you built this shed alongside me! Every purchase helps support the channel!
Follow me on Instagram: / atimprovements
Check out my Blog: Atimprovements.com
Subscribe to my KZfaq Channel ⬇️ kzfaq.info...
Check out my Website for additional DIY Content: atimprovements.com
▬▬▬▬▬▬▬▬▬▬▬▬▬
🎥 MY KZfaq GEAR
Camera (Iphone Max): amzn.to/3d5HxSo
Microphone (Maono Condenser Mic): amzn.to/3RCAb7N
Tripod: amzn.to/3Rz5Gj3
Mini Tripod: amzn.to/3Rvt2WM
Lighting: amzn.to/3d4QdZ5
▬▬▬▬▬▬▬▬▬▬▬▬▬
🛠🧰 TOOLS THAT I USE
Carbide Tipped Drill Bit: amzn.to/3S0hdIM
Tapcon Screws: amzn.to/3OxEWxh
Drill: amzn.to/3JICKkk
Tape Measure: amzn.to/3HaTWgE
Circular Saw: amzn.to/3BFotC4
Masonry Drill: amzn.to/36yP1JW
Level: amzn.to/3HowUDn
Hammer: amzn.to/35fIpiT
Chalk Line: amzn.to/3MwSDg8
Clamps: amzn.to/3HLqwpK
Drill: amzn.to/3JICKkk
Sawzall: amzn.to/3HcdeSI
Circular Saw: amzn.to/3BFotC4
Jig saw: amzn.to/3I6lcyd
Air Compressor: amzn.to/34TatJf
Framing Nailer: amzn.to/3JGpBYU
Roofing Nailer: amzn.to/3BEAuYF
Orbital Sander: amzn.to/34UwlUD
Bar Clamps: amzn.to/3JjFrJe
▬▬▬▬▬▬▬▬▬▬▬▬▬
Thank you so much for watching!
I also want to extend a HUGE THANKS to Spartan Epoxies!
*All content on the Andrew Thron Improvements KZfaq channel reflects my own opinions. Please seek out guidance of professionally trained and licensed individuals before making any decisions. Links in the description may be affiliate links.

Пікірлер: 348

@MaryCumbersnatch Жыл бұрын

We put industrial epoxy (I forget which) over a US penny floor in our kitchen. I was too cheap to buy those expensive shoes for a one-time project. I took dollar store flip-flops, traced around them on a piece of scrap plywood, cut out the shapes with a jigsaw, then attached the flip-flops to the wood with leftover drywall screws through the foam, pointy end to the floor. I made one pair for myself, and one for my husband. They worked a treat and cost $2 total instead of $100/pair.

@AA-zq1sx 10 ай бұрын

Why go throgh all the trouble of attaching the plywood? Could have just used the $1 flip flops and tossed them afterwards.

@MaryCumbersnatch 10 ай бұрын

@@AA-zq1sx the screws won't hold in cheap foam flip flops, and we didn't want to lose our shoes in the middle of the epoxy pour.

@master6676 7 ай бұрын

Great idea, thanks for sharing

@MaryCumbersnatch 7 ай бұрын

@@master6676 you're welcome!

@Rometor 6 ай бұрын

They are about $12

@everythingsavailable Жыл бұрын

Dude thank you so much. Being a young homeowner no one wants to give me solid advice or help because they think I’m some stupid kid. KZfaqrs like you keep my home in a great looking space and can’t wait to have these in my shed!

@AndrewThronImprovements Жыл бұрын

Glad it helped! Good luck with all your projects and congrats on the home!

@SupreemSPGamer Жыл бұрын

@@AndrewThronImprovements how much did it cost ya? Thanks!

@Oregonhero Жыл бұрын

Hey also a young home owner and I just wanted to say killer video, and super informative. Not to mention funny lol #flakefree

@woozy607 5 ай бұрын

Metallic Epoxy looks great when u put it down but a year later it looks like crap unless u buff it and maintain it, it’s not very durable

@stormysocks 22 күн бұрын

I'm a grandmother, KZfaq is my go to for everything

@joekostanza4478 6 ай бұрын

No one explained like this guy wow he’s too good

@AndrewThronImprovements 6 ай бұрын

Glad it was helpful!

@npursuit Жыл бұрын

I've been on epoxy binge for the past few days. Of all the different ones, your design outcomes are top notch! Thanks for posting this!

@AndrewThronImprovements 11 ай бұрын

Appreciate it!

@robertdupree2451 10 ай бұрын

Would love to know how its holding up, Great video thanks for the help!

@brandoncostner7437 24 күн бұрын

Same

@gt1601 8 ай бұрын

That's exactly the same color and look of my Leggari counter tops we did a couple of years ago. Looks awesome.

@AndrewThronImprovements 8 ай бұрын

Thanks!

@tracywodonga8112 Жыл бұрын

This is not something I would ever do - looks very expensive and complicated! But wow, this was one of the most incredibly satisfying videos I have ever watched! Thanks for sharing!

@michaeleshbaugh6797 Жыл бұрын

Really he just showed you step by step lol

@tomharrell9575 9 ай бұрын

It's cheaper than 99¢ 12x12 stick on tile and is waterproof as well as more durable and easy to repair. Remember that stick on tile has to follow the arrow on the bottom so any cuts take up a whole tile and the rest is useless or the pattern doesn't match.

@indymodz177 9 ай бұрын

@@tomharrell9575 I agree the epoxy has way more value but from the pricing from the link he has shows a little over $500 for the kit to do 150sqft. you could do laminate for that price let alone pretty much any stick on tile for far less.

@tomharrell9575 9 ай бұрын

@@indymodz177 stick-on flooring pills up vinyl flooring gets holes and gouges and wears out quickly. There is a reason why commercial Labs pour epoxy.I'm not to mention they're not the only people in the business it can't be done much cheaper.I think those folks have just been doing it for awhile and they're proud of their product and think that you should pay for something that's of what they believe is higher quality.

@woozy607 5 ай бұрын

@@tomharrell9575 metallic epoxy does not hold up, it look great when u apply but once u start using it, you can see every imperfection, your footprint, bike tire marks, dog scratches, anything show up on there.

@queen_jaylo222 Жыл бұрын

Nice video and results! I would recommend using construction paper along the perimeter with the tape to protect the walls. But overall you did a great job on this floor! 🥰💚✨

@bobbyabainza4421 8 ай бұрын

I watch many tutorials and For me you're the best thank you for teaching us ❤❤..

@lilmre5 Жыл бұрын

THIS IS AMAZING. We are first time homeowners on a concrete slab home, desperately trying to get rid of this old dirty carpet. THANK YOU 🙏🙏🙏

@AndrewThronImprovements 11 ай бұрын

Thanks and good luck!!

@breadclann8343 Жыл бұрын

I watched so many videos on applying epoxy an yours is the most user friendly I’ve seen 👍🏽👍🏽👍🏽👍🏽

@AndrewThronImprovements Жыл бұрын

Glad to hear it! Thanks for watching and good luck with your project!

@LisaCunninghamLieveEnterprises Жыл бұрын

Most definitely!

@dmarkellos3445 Жыл бұрын

Dude!!!.....I'm into the 1st minute of this and I already love it....YES!!!

@AndrewThronImprovements 11 ай бұрын

Appreciate it!

@joycevaughn5913 7 ай бұрын

Thank you so much for this video. I'm removing all carpeting and didn't know you could use epoxy over wood (thought concrete only). I'm doing all my floors in white.

@AndrewThronImprovements 6 ай бұрын

Thanks for watching and good luck!

@stillhavecommonsense6875 5 ай бұрын

How'd it go?

@joycevaughn5913 5 ай бұрын

@@stillhavecommonsense6875 Still working. Should have been finished by now but I've been putting in a lot of extra hours at work these past two months.

@patricksmith3135 Жыл бұрын

You guys do it faster every time. Love your shed.

@AndrewThronImprovements 11 ай бұрын

Thanks Patrick! Appreciate you 🙏🙏

@spartanepoxies3798 Жыл бұрын

Great job Andrew. Wow! Your shed is nice enough to live in! Very detailed instructions too, and i'm sure this will help a lot of folks apply epoxy! It's super easy and so fun! Can't wait to see your next video!

@AndrewThronImprovements Жыл бұрын

Thanks! I am super happy with how it turned out! Appreciate your help and thanks for watching!

@robpittstop1797 Жыл бұрын

Dont you have facebook? I would like to discuss on facebook messager about the colors for the dining room in spring. Thank you.

@marklevenson 5 ай бұрын

may do this in my bathrooms and kitchen in my renovation property looks great

@itstime7506 2 ай бұрын

You just made the coolest shed .. 😎 my kids would want me to make it their cottage its so good looking!! Thank you for sharing your valuable information.

@LisaCunninghamLieveEnterprises Жыл бұрын

You know, who would have "thunk" this? We have mobile home rentals and I am getting so tired of replacing carpet and flooring. I told my hubby there has to be another solution. Here it is! How big was your space and how many man hours did you put in? It's a lot of work. Great job! Loved watching your video and your steps are great!

@justinmarikastinson7400 7 күн бұрын

I searched for this to see if it was possible and possibly a cheaper alternative for our mobile home too

@AxelWalters 7 ай бұрын

Absolutely incredible video, hit every point without dragging anything out. 10/10 Boss. 👍

@AndrewThronImprovements 7 ай бұрын

Appreciate it bro!

@penelopeclearwater4454 Жыл бұрын

I was so creative in my childhood trailer with particle board flooring! The carpet was gone by 2003 and you already know I was on a budget living there Han solo!

@borota71 7 ай бұрын

Great tips on the joints.

@InnocentCougar-fg7zo 2 ай бұрын

This is SUPER COOL MIGHT DO MY BEDROOMS WHEN I I GET BACK HOME

@TheHexeract 3 ай бұрын

That shed is amazing,

@toyatsymonds9324 7 ай бұрын

🎳 love the methodical arrangement ; patience is a virtue

@paulalbin1547 Ай бұрын

Excellent tutorial, and very much appreciated. I'm using Spartan products over a 290 sq ft OSB floor in my woodshop and if anyone's interested I can speak to getting that material ready for epoxy. (Plot spoiler: I wish I had plywood instead. But you work with what you got.). Before anything else I used Spartan CF100 crack filler for any gaps between sheets and countersunk nails (should have been screws, but I learned that too late). Spartan recommends applying KILZ2 (not 3, for whatever reason) before laying down the Flex. Needed two gallons. Next the Flex, which I had trouble spreading out and distributing evenly maybe because I didn't have a rubber notched squeegee, only a notched metal one for concrete...useless. So regular straight edge rubber is what I used. **One thing you might want to stress is how much time you have to spread the stuff before it starts to set and becomes super viscous.** Don't dilly-dally. I barely made it. Also, Spartan indicated one gallon would be enough to cover my 290 sq ft but in hindsight I wish I'd had two. It's good enough, I guess. I'm applying the WB primer today. Will let you know how the rest of the project goes. BTW I'm not doing metallic, just the flake "cast" as they call it mixed in with the Clear. Also adding a can of Spartan's non-skid. At this time I'm not planning on HPU top coat. Will let you know how it goes. Total cost of Spartan materials: about $1000 (2024). Not cheap, but good.

@thesoulofmemories Жыл бұрын

High quality DIY project video for sure. Good job. Thanks for the video.

@AndrewThronImprovements 11 ай бұрын

Thanks for watching!!!

@danielwilson1435 11 ай бұрын

Awesome well done this tutorial help me with what I was looking for. Thank you so much buddy.

@leenaidoo8202 Жыл бұрын

Great explanation made it seem so simple great work done 👏🏽 🔥🔥

@AndrewThronImprovements 11 ай бұрын

Appreciate it!

@NicoleMs.Country 8 ай бұрын

Wow… Beautiful

@perfectioninheaven Жыл бұрын

Im going to be honest I thought you ruined it with those swirls as you were doing them, but it actually turned our rather impressive and i really liked it. Thank you for sharing Andrew. Looks really good.

@AndrewThronImprovements 11 ай бұрын

Haha I did too as I was going it! But I’m happy with how it came out. I just trusted the process and went for it

@hugoboss300 Жыл бұрын

Great Job, I have to say I enjoy watching your content and learning

@AndrewThronImprovements 11 ай бұрын

Thanks Hugo! Appreciate it!

@borota71 7 ай бұрын

Very good talk through very helpful.

@AndrewThronImprovements 6 ай бұрын

Glad it was helpful! Thanks for watching!

@aongusaongus4371 8 ай бұрын

I'd like to do the walls as well. If possible

@o-dstudio7190 Жыл бұрын

Great , informative video - Thank you for great work, looking forward to your next one

@livemorelovely4258 8 ай бұрын

How long did it take for crack filler to dry?

@elisherellis6955 10 ай бұрын

Very very beautiful man. I want to do my garage floor like that the same way

@AndrewThronImprovements 10 ай бұрын

Appreciate! You should! Just consider adding something to make it non-slip.

@judichristopher4604 Жыл бұрын

WOW... So Beautiful... EXCELLENT JOB... I have those same floors in my Vintage RV... This video is a God-send... Love this video... Great job...

@AndrewThronImprovements 11 ай бұрын

Thanks Judi!

@celiafernandez6065 3 ай бұрын

Hi Judi can I see the floors in your RV? I am thinking of doing that in mine? Thought I was crazy lol

@judichristopher4604 3 ай бұрын

@@celiafernandez6065 You're not Crazy... Go For It. I do not have the pictures anymore... I sold the RV and my old phone died when it fell in my Coffee!!! LOL

@patricksmith3135 Жыл бұрын

Outstanding job Andrew! The color choice is perfect. My daughter used blues on her concrete floor for a similar look. I thought you built your shed on a concrete base; guess I missed something. My back aches for you, however, was there no longer handles available for that floor rolling job? :) Bt, you are young with a different perspective. It is an amazing metamorphosis however you look at it: style, electrified, storage friendly and beautiful to look at. Thanks for the show and I'm looking forward to the next one. Patrick

@AndrewThronImprovements Жыл бұрын

I appreciate it, Patrick! I built a plywood shed base frame on TOP of the concrete slab actually - but I could have just build the shed slab-on-grade. And I hear you on the back lol but it's mainly my knees these days haha. Appreciate you watching and for the continued support of the channel!

@patricksmith3135 Жыл бұрын

@@AndrewThronImprovements I really feel your pain WRT your knees. Mine have both been replaced ergo no pain, unless I kneel. Imagine the odd looks at Mass when I do not kneel with the others. I have to really turn up my Halo and forge on. The contractor pads don't fit and can't be adjusted for me. Eventually I'll find some that fit, stay in place etc. I will remain faithful ATI fan and patiently wait for a full blown ATI channel with all your talents showcased for all to see. Just set up your investment scheme now so you don't have to delay filming when all the $$$ begins to come in :). Are the Oysters any good this season?

@spekkyBarsteward Жыл бұрын

Looks absolutely fantastic 👌

@AndrewThronImprovements 11 ай бұрын

Thanks!

@annh3599 11 ай бұрын

Thanks Andrew, cool floor!

@StephanieMyersOnline Жыл бұрын

I was looking for a video like this 12 months ago!

@AndrewThronImprovements Жыл бұрын

Haha for the next epoxy project then. Hope your project turned out well

@StephanieMyersOnline Жыл бұрын

@@AndrewThronImprovements I ended up doing tile instead and it turned out great

@christdriven8790 7 ай бұрын

Can you do this over OSB board?

@EvansAmahwa-ri6ik 6 ай бұрын

Please can you help me know which type of machines I nerd for a such project, good job

@AJKlos 7 ай бұрын

Amazing

@bobbytogores4902 7 ай бұрын

Can I do this on top of OSB sheating? I am justing asking because that's what I have and I hope I don"t have to replace it. Thank you

@punkyshrewster2736 Жыл бұрын

Could this work on a second floor bathroom if I lay plywood over the subflooring?

@user-en7rn1lt5l 10 ай бұрын

We're thinking about doing this on our exterior back deck. Is there anything else we need to know about exterior application?

@divinesdoor222Tiktok Жыл бұрын

absolutely divine

@AndrewThronImprovements 11 ай бұрын

Thanks!!

@jeanninephillian4138 Жыл бұрын

That was very cool. A lot of layers and patience. Would you do this again or just lay flooring?

@AndrewThronImprovements 11 ай бұрын

I would but not for such a small area! Maybe for a 2 car garage

@metaldetectingwiththesilva8311 11 ай бұрын

Wow! Just Wow!!!! Looks amazing!

@AndrewThronImprovements 11 ай бұрын

I appreciate it! Thanks for the support 🙏

@lynnchoots6200 Жыл бұрын

So no grinding is needed it only applies to concrete? & flex proxy product is only for wood & wouldn’t be needed for concrete ? When you were applying your white Epoxy how did you wait until adding the black epoxy?? Is there a color chart you may know for on what colors would be great to use as a design just how you used this black & white ? BTW your code was the most helpful thank you for this I don’t really comment but you are different & actually spreads a wealth of knowledge thanks for giving back !

@cryptoshicryptomoto Жыл бұрын

Thank you for sharing I had no idea what Epoxy was. How much did you spend on all the materials to complete project? I would love to try it myself for my 12 x12 bedroom..

@riderZ873 6 ай бұрын

Hey, hows it holdin g up after a year? I wanted the same for my plywood floor shed and contacted a professional who refused to apply epoxy floor to a plywood shed due to the movement that could be in the floor and temperature changes. Instead he recommended polyurethane floor due to its elasticity and resistance to temperature changes. Your thoughts after a year?

@outaboutwithmikedonna305 Жыл бұрын

Brilliant vlog thank you.

@AndrewThronImprovements 11 ай бұрын

Thanks!

@AnakOrang11 Ай бұрын

Can i use this method for ceiling its would be so wowwww❤

@beccaandcharliesworld5571 6 ай бұрын

I really want to put a floor like that in my kitchen however it scares me...lolol Do you have enough time before it starts to harden? Your videos are awesome . I came across one on u-tube and began to watch one after the other. Boy do I have a lot of work ahead. You make it look pretty easy although,... I am sure these jobs are harder than it looks 😮 Well back to your videos. I absolutely love them. Tyfs 😊

@clevewilks4312 Жыл бұрын

Awesome job my brother. Can you let us know around about the total cost of this project. I'd like to way my options. Thanks and keep the videos coming

@user-ls2jg7vl2h Жыл бұрын

Fr. I was looking at this video hoping it would be cheaper than wood. But it seems just as much or even more expensive

@joserendon7029 Жыл бұрын

I'm glad I came across this video and now i subscribe

@AndrewThronImprovements 11 ай бұрын

I appreciate it!!

@gregory8863 Жыл бұрын

Excellent job

@AndrewThronImprovements Жыл бұрын

Thanks Gregory! I appreciate it!

@tmodd2032 Жыл бұрын

Will this product work on the exterior? Sunlight and freeze/thaw cycles?

@o-dstudio7190 Жыл бұрын

Andrew we want to do white gloss floor - would you point please to the right product Thank you for your time

@smokinbutts2 8 ай бұрын

Would it be OK for a enclosed trailer?

@momkatmax 2 ай бұрын

91% isopropyl alcohol is great for getting that sanding dust off the floor. Use a spray bottle. We have a couple of really friendly cats in the neighborhood and I had a picture in my mind of doing tjis, turning around and seeing MeowMeow stomping around to say hello. Gotta love him!

@lwalto 6 ай бұрын

Did you apply this to pressure treated plywood?

@northernbabe8787 11 ай бұрын

BEAUTIFUL

@AndrewThronImprovements 11 ай бұрын

Thanks!!

@taybrews Жыл бұрын

I don't have a plywood floor, I have spruce floor boards so there are gaps along every board. Do I need to fill each crack before I can move to the next step?

@MarcoLiftz 11 ай бұрын

That’s so dope man you made it look easy brother let’s go

@AndrewThronImprovements 11 ай бұрын

Appreciate it!

@djdenicola926 9 ай бұрын

Can you put garage epoxy paint over a wood deck? I am trying to get my large deck a few more years of wear before I have to replace it.

@jerrycasana1157 11 ай бұрын

Thanks for sharing bro.

@DutchFreezeR 8 ай бұрын

Love the results how is the epoxy holding up with the working of the wood underneath?

@AndrewThronImprovements 8 ай бұрын

So far so good! I’m happy with it. Thanks for watching!

@DutchFreezeR 8 ай бұрын

@@AndrewThronImprovements Sounds good, thanks for the feedback. Loved this vid, will check your other stuff as well!!

@MoOmran-zr5rf 10 ай бұрын

Thank you so much

@AndrewConway Жыл бұрын

Nice, But is it tough??? I'd like to do this to my Shop which will have tons of tools and heavy things are going to fall.

@TimRoden Жыл бұрын

I love the floor. But I'm curious how much it cost to do the entire thing? Maybe you mentioned it somewhere and I missed it. Thank you!

@INFRNL1 Жыл бұрын

I'm sure it wasn't cheap. Great idea though. I'm going to have to look into something like this, even if it's a more basic approach. But my shed is 14x20, quite a bit more material

@AC-kn3yi Жыл бұрын

Nice job 👍🏽

@AndrewThronImprovements Жыл бұрын

I appreciate it! Thanks for watching!

@judyconte6566 Жыл бұрын

Brand new subscriber and I would love to know what was the square footage of the shed and how much Where the overall cost ?????

@philspag375 11 ай бұрын

Great video, how is it holding up?

@timdaniels2094 Жыл бұрын

Thanks!

@AndrewThronImprovements Жыл бұрын

Appreciate it, Tim! Thanks for supporting!!

@Hierrito 26 күн бұрын

Great job

@fremthegoat9461 11 ай бұрын

Best video out there!!!!! Thx

@AndrewThronImprovements 11 ай бұрын

Appreciate it! Thanks for watching!

@tamekahunter3707 Жыл бұрын

Just beautiful. Is there a way you can help me order what I need to do a 35 sq ft bathroom. I'm having trouble locating everything and estimating the right amount on the website.

@UsernameUnkwn21 Жыл бұрын

Call the websites customer service

@donaldsmith283 Ай бұрын

Thank you.😊😊😊😊😊😊😊

@thedigitalshack 4 ай бұрын

Do you think this would work on a boat floor. Our forward cabin has the carpet removed and want to use an epoxy floor with a blue pigment. The forward cabin is around 52.65 SqFt

@privuser9616 11 ай бұрын

Did you thing about using a Polyaspartic floor coating instead of Epoxy ?

@michaelgormel7223 Жыл бұрын

Top coat should always have full length rolls

@melatabera1478 Жыл бұрын

what type of epoxy used for floor? and what type of epoxy can use for resin art pls tell me

@deborahdanhauer8525 Жыл бұрын

Excellent! Are there temperature restrictions for applying epoxy? I assume there would be on the cold end, but are there any on the hot end? I live in the humid south.🐝🤗❤️

@spartanepoxies3798 Жыл бұрын

Hello Deborah. Recommended application temperatures are 60 to 90 Degrees F with relative humidity below 85% for best results. We sell a lot of epoxy to folks in the south. Especially Florida!

@AndrewThronImprovements Жыл бұрын

Hi Deborah - as Spartan Epoxy commented below, I believe there is an optimal application temperature range. However, I think it holds up pretty well in almost all temperatures after it has cured. Thanks for watching!

@deborahdanhauer8525 Жыл бұрын

@@AndrewThronImprovements Ok, thanks so much🐝🤗❤️

@AndrewThronImprovements Жыл бұрын

@@deborahdanhauer8525 Welcome! good luck with your project 👍

@deborahdanhauer8525 Жыл бұрын

@@AndrewThronImprovements 🤗

@itzdante5047 2 ай бұрын

I know this is a old video, I’m wanting to epoxy a spare room in my house. Should I place a set of thin playwood on the sub floor in my room?

@RB-es1vx Ай бұрын

No sanding before the waterproof base epoxy?

@mariuspmi5597 Жыл бұрын

Good job 💪Floor total cost for square meter ?

@craigwalker9474 11 ай бұрын

Appreciate you

@AndrewThronImprovements 11 ай бұрын

Appreciate you watching!

@Miss.trixx1 6 ай бұрын

Pls help lol can I buy any brand of epoxy primer ? And then also any brand of epoxy resin ? I’m trying to do black with gold so would I need a black primer ?

@1jayfoolish 2 ай бұрын

Does the flex product comes with the kit?

@Mr1985Badass Жыл бұрын

My shed is a 10x12. How much would it cost for all the products you used?

@rontribble414 4 ай бұрын

Thank u 🙏

@hopeforthebest8302 Жыл бұрын

This looks amazing! 👌🏽 Is it too slippery?

@AndrewThronImprovements Жыл бұрын

Hi! It definitely get's a bit slippery if wet.

@d.herman9961 Жыл бұрын

Did you sand the epoxy filler used for the cracks/screw heads?

@AndrewThronImprovements 11 ай бұрын

I didn’t - I just applied a thick enough layer of epoxy to cover it

@warrenlowe676 5 ай бұрын

@@AndrewThronImprovements No need to sand the plywood the open the pores for the first epoxy coat? Like with concrete, you must grind it. Just curious.