BMW e46 DISA repair - PERMANENT FIX!!

Рет қаралды 33,304

4 жыл бұрын

This video is about repairing the DISA valve on a BMW M54 engine but can be used as a reference for other engines. Repairing your DISA is a great way to restore power and make your engine run smooth. Signs of a failing DISA are pour fuel economy, rough running/idling, and loss of power. This video goes over step by step on how to fix these issues using german auto solution's DISA repair kit. They make a kit for both the 2.5l and 3.0l. KIT LINKED BELOW.
LINK TO BUY DISA REPAIR KIT: germanautosolutions.com/store...
PDF Instructions: germanautosolutions.com/suppo...
SMASH that LIKE button and subscribe!
LINK TO BUY CARLY BMW: bit.ly/2DnmrL1
Check out ECS Tuning for all your Euro part needs. Use my affiliate to help the channel: bit.ly/2JqszXb
LINK TO BUY SHINE ARMOR: shinearmor3062.grsm.io/evango...
HELP SUPPORT THE CHANNEL: www.paypal.me/evangoyuk
#BMW #e46 #DISA This description contains affiliate links. If you buy a product through my custom link, I will earn a small commission at no extra cost to you. This video is for entertainment purposes only. Evan Goyuk assumes no liability for any repairs or modifications performed by the viewer as a result of the information contained in this video.

Пікірлер: 41

@daverose1533 2 жыл бұрын

Your tip to use a bolt to help remove the flap was a life saver 👍

@joeysplats3209 10 ай бұрын

I just installed a DISA rebuild kit from German Auto Solutions and it was simple and straightforward, using the step-by-step instructions on their website. The product is quality and their customer service is great. If you have 100K miles on your E46, you should rebuild or replace your OEM DISA.

@alex_munk8302 4 жыл бұрын

Oh my god 😂😂😂 that’s literally everything wrong with my car. I’m gunna order the kit and fix this issue. Thank you Evan

@sbrave 2 жыл бұрын

You sounded better outside

@Smellyal8r 5 ай бұрын

Nothing hypothetical here, this THE ACTUAL stuff

@oscardeltoro898 6 ай бұрын

Researching this before I tackle mines. No codes other than p0171/p0174. Car was down for 3 years sitting outside so it's more of a resto maintenance wise. I can somewhat confirm my pin has not entered the chambers however I do hear metal clicking around somewhere upon cranking and then it disappears.

@pedrodiaz6558 3 жыл бұрын

You don’t have to lubricate the disa valve (the part that goes inside the intake) before right? It’s just a doubt before installing mine

@tengzturiagaiii3185 9 ай бұрын

So mine, when i go it out. I checked the flaps. Moved it how it supposred tonopen and close. It seem normal. Its still intact. So is that mean is still good?

@Neo-ih2fh Жыл бұрын

hey brother, if i forgot to put a crazy amount of lube in the hole. Will this damage anything? I did Lube the base of the crank very well, and slid in nicely. Please let me know. I swear it just sounds different.

@elvrboy 4 жыл бұрын

about a month ago my car started idling very rough for a week, it wasn’t drivable, soon i started hearing some loud knock noise inside the intake manifold. lucky the disa valve flap and pin were barely on still, got a new disa!

@EvanGoyuk 4 жыл бұрын

Wow this can be very scary

@elvrboy 4 жыл бұрын

Evan Goyuk yeah man i’m so glad i found the issue before the pin fell into one of the intake manifolds and blow my engine

@pyjamasparty1337 2 жыл бұрын

Was the yellow lever broken in half?

@youonlyliveonce2556 7 ай бұрын

Don't forget to cover the lower intake boot , you really don't want nothing to go in there while working on your car

@joegatlin2788 4 жыл бұрын

Hey Evan I have a 2006 e46 330ci zhp coupe with 255,000 miles and it rans like a new car

@EvanGoyuk 4 жыл бұрын

That’s awesome to hear!!

@Bautista999 Жыл бұрын

Is the o ring still suppose to be visible ?

@Bautista999 Жыл бұрын

After install

@aidancadogan7998 2 жыл бұрын

How long is the original disa valve supposed to last?

@C330ZSP Жыл бұрын

Do not let it get to 100k without replacing, be careful if you dont

@joeysplats3209 10 ай бұрын

@@C330ZSP when I read about the potential problems with a DISA that has a lot miles on it, I immediately found a high-quality company that sells a good rebuild kit. (German Auto Solutions) My DISA, at 160,000 miles, was still in great shape but the risk of that pin falling into the manifold is just too big for me. Now I don't have to worry about it and my E46 has a bit more pep. I also got a new coolant cap.

@bogusienombre355 3 жыл бұрын

I hear that single pop sound after I turn off engine. Is that normal operation?

@Soph_is_delu 10 ай бұрын

I have this to.

@jagfox2457 2 жыл бұрын

When I took the DISA valve out, the pin was missing. what should I do to find it

@yncpollo Жыл бұрын

Hey did you ever find out please let me know

@jagfox2457 Жыл бұрын

@@yncpollo I used a Borescope and a magnet to get it out. It was jammed stuck on the entry way to one of the cylinders inside the manifold so be very careful

@yncpollo Жыл бұрын

@@jagfox2457 forsure thanks for the reply

@yncpollo Жыл бұрын

@@jagfox2457 did you have to remove anything ?? Fuck I’m trynna replace mine tomorrow but that screw shit got me paranoid

@jagfox2457 Жыл бұрын

@@yncpollo I just took out the DISA valve and stuck the borescope inside the manifold. if its too deep in there then id suggest removing the entire intake manifold off but you most likely wont have to. Good luck

@Bimmerboiz1 2 жыл бұрын

Wow this videos audio is really bad bro

@bogusienombre355 3 жыл бұрын

How's the disa holding up in 2021?

@JohnstonPettigrew 2 ай бұрын

He doesn't answer questions.....he has gone on to own 10 BMW retailers all over the nation.

@joeimbesi5361 4 жыл бұрын

On another note, I have an 01 330 coupe with 58,000 km. Occasionally, a gear like symbol(*) appears in the gear indicator gauge. When this happens the car will only run in third and fourth gear. If the * appears and I turn the key on and off, the * goes away and the car runs normally. My mechanic thinks it might be the park indicator switch. Has anyone else had this happen?

@Eratiik 3 жыл бұрын

Mine did this a few times before when I first purchased it, same year and model, i put it down to me turning the car off and on again when it was in tiptronic mode. (Mine was auto)

@krispychickengamer9950 Жыл бұрын

You should’ve just stayed filming outside. Seems like there’s more wind inside than outside

@FilmedbyDani 4 жыл бұрын

You should do a video of the floor is lava

@FilmedbyDani 4 жыл бұрын

Can I be in your videos love your little sister Danica

@JohnstonPettigrew 2 ай бұрын

sound murderer.......

@sscharlemagne2060 10 ай бұрын

Really bad video there is poor sound very bad light the man cant even speak well. there is far better videos to watch about this subject.

@oscardeltoro898 6 ай бұрын

Unsure how this comment is of any help to anyone other than causing critique to the creator. Unsure if you have ever taken a jab at recording yourself and uploading content but something like this would require hours of setting up and reviewing your videos. This would also be critical that you have it "perfect" while disassembling, while checking your own voice and maintaining yourself on the topic lastly making sure you dont mess up on video or mistakenly break the part. Doubt you'll read it or care, more than likely you'll tell me to go screw myself in an attempt to save face.