This!

Hi RON. Das schreit nach einem neuen Video. Mal ausprobieren ob man die LED konfigurieren kann das sie stehende oder durchdrehende Räder anzeigen. Wie in einem GTE Fahrzeug.

@@christiankumpel3912 Man kann Wheel Spin, Wheel Lock, ABS, TC, DRS, Pit Limiter und gelbe/grüne/rote/blaue/weiße Flaggen mit den FlagLEDs anzeigen lassen, wenn die Sim das in deren Telemetrie Daten ausgiebt und man ein Wheel mit FlagLEDs hat (bisher nur das Formula v2). www.fanatec.com/forum/discussion/1125/fanalab-share-your-favorite-profiles#latest Hier habe ich für sehr viele Autos (alle Autos in ACC und alle Autos in F1 2019 sowie 25 spezifische Autos in iRacing) entsprechende Profile mit perfekt abgestimmten LEDs gemacht, kannst dir ja mal anschauen ;)

Yes

Shifter is not shown in the Lab because you can not adjust anything for the Shifter

There is a full PDF manual btw. Default tuning menu settings for each game you can find in the Fanatec Forum

@@MixedRealitySimRacing a PDF? Can you post a link here? The forum is kind of confusing

@@dubtube6691 No answer, feels Bad man

1. Not on the wheel base side, but with FanaLab you can save an unlimited amount of presets. 2. No, only if you know something about electronics and mod them.

Buttkickers are your best friends. One on the pedal box & one on the seat.

@@BenjaminKus I have ButtKickers, but the vib motors per pedal would be nice for ABS if it actually worked well enough.

@@MixedRealitySimRacing How can you save multiple profiles? I'm only able to do 5.

@@Mikey6048 within the FanaLab software you can safe as much as you want

Or ABS kicking in?

No

You can also just install the newer one

Does work with the ClubSport Wheelbase.

@@KevinBorell not only that, working basically with every Fanatec wheel base, including CSL.

@@momorious have you set it up on anything other than a DD wheel? I'm running v2.5 would like some feedback

Which base?

@belevezero Put road effects to 0

Just select a different Setup before you save.

Only Sony can answer that question.

Since version 1.99.03 this is possible, yes.

You can have several hundreds of profiles for every game.

We're working on it - we have some bugs to iron out with the new website, please bear with us.

Alternative link added in description.

Not needed but much improves your experience

Not possible. It's pc exclusive

Yes.

@@domb_fanatec2826 it's not I downloaded and can only get Drive 347 to work on my system.That drivert doesn't' support Fanalab latest version. I contacted support and they said maybe in the future some people get it to work some don't that's why its a beta driver.

Das kann man bereits. Einfach ein anderes setup laden, die Tuning Menü settings wieder so einstellen wie man es gern hätte und dann das vorhandene Profil einfach überschreiben. So kann man in sekundenschnelle das Set von 1 auf 5 wechseln. Alternativ die pws Datei im AppData Pfad öffnen und dort manuell das Set ändern.

@@momorious Für den den 1. Lösungsweg den Du beschreibst muss man jedoch zwingend ein Profil öffnen welches bereits auf Set 5 war. Dieses dann abändern und erneut speichern. Dieser Weg ist doch Sinnlos, da erstellt man doch gleich ein neues Profil auf Set 5. Den Weg mit dem manuellen editieren des Profiles gehe ich jetzt und funktioniert auch aber die Software wäre ja eigentlich dazu da, einem den Workflow zu erleichtern und da FanaLab noch Beta ist sollte man doch solche Feinheiten miteinbeziehen. Es kann doch nicht so schwierig sein ein Schalter zu implementieren wo man die Sets neu zuweisen kann.

Which game?

@@momorious it doesn't detect iRacing rfactor2 Assets Corsa F1 2019

It's in your download folder, install it and start the desktop shortcut. There is also a full PDF manual on the product page

Yes, in the "settings" at the very top.

@@momorious Checked all around there and i see nothing :(

nevermind found it. i had to update to 1.12. however now i cant open it cuz my drivers lol

@@Jahovan1887 that's because you have installed FanaLab and the driver to different locations. You have to install both at their default install patch at Drive C. Only then FanaLab will find the driver

That's already possible since a few months with a recent firmware. By pressing the power button for a short time of under 1 sec the FFB will be disabled. Pressing it again re-enables the FFB again.

@@momorious I know, I want it to stop when I hit the button. Not hold down the little tiny power button down by my feet.

@@OhItsThat but that's not possible and won't come because the electrical design is designed differently. Only way to kill FFB only is to press the power button. The red E-Stop button will always kill the power.

@@OhItsThat On recent beta firmwares it only requires a single tap. If you hold down the button you will turn off the base entirely. I recommend that you mount the Killswitch within arm's reach so that it is easier to use this feature.

DomB_Fanatec I keep it down by my leg so I can hit with my leg and not my injured hands.....in theory....If the wheels going nuts I don’t wanna stick my face into it reaching down to find the little power button to kill the ffb. I was just hoping it could be added to the big red button like other dd wheels on the market. If it can’t it can’t.

and i cant set the brake force to more than minimum

DB TJP Same for me too.

Must be in the download folder like usual.

@@MixedRealitySimRacing i got it installed but nothing, no link no map what so ever ?

It creates a shortcut on the desktop

So went back to fanatec download page and noticed I was downloading the driver again, even though I was in the fanalab section. Now downloaded the beta. Thank you.

Your issue is not related to this FanaLab video.

Contact support if you have issues with your hardware.

It should be possible yes.

@@domb_fanatec2826 When ?

@@tobbebergman7583 I can't provide an ETA, but FanaLab is in constant development.

@@domb_fanatec2826 OK Thanks !

We've added an alternative link in the description.

This can be done using JoyToKey. I suggest that anyone who wants this feature integrated into FanaLab should write their feedback in the FanaLab thread on the Fanatec forum.

I want to use it, too, for the PS4. How can I store the information so that it is used in PS4 games? For example the LEDs or LCD Display?

No. It's pc exclusive.

If GT Sport is coming to PC then yes, because it's not possible to run software like this on a closed system console.

No.

Forza 7 on PC could be possible but GT Sport is impossible because it's only available on PS4 and there such programs doesn't work.

Assetto corsa

@@2Old4Forza gd choice

We're working on it - we have some bugs to iron out with the new website, please bear with us.

Alternative link added in description.

@@domb_fanatec2826 Thanks, but since beta 1.12 rotary dials (McLaren GT3) are no longer working in ACC. They're detected and working in the ACC setup menu, but as you step into the car they don't work!

@@Mexmex1975 FanaLab should not have any impact on this functionality.

What part of it is not working?

@@MixedRealitySimRacing everything, it asks for a driver that doesn't exist for my CSW ???

@@tobbebergman7583 it exists on the FanaLab page, just download it.

@@MixedRealitySimRacing Thanks -I did download it and the Fanalab beta but I can't say I noticed any difference from the previous driver 328 in AC or ACC ? I can't seem to find any info on the 345 driver anywhere !! ??

Hi Brandon, thanks for your feedback. To address your points: '6 months too late' - we would've liked to have the software available sooner, but stability and compatibility was the priority. And we certainly didn't want to delay the Podium launch for FanaLab - the Tuning Menu features meant that additional software tuning was deemed to be not essential for the direct drive systems to launch. FanaLab has a long development roadmap ahead. 'Taking money way in advance of delivery' - this is not a forced requirement. Podium bases are currently in stock in all regions. 'Skipped deadlines' - launch dates are always an estimate and can slip for many different reasons. It's not something we take lightly. As compensation for the lengthy delay of the Podium launch, we provided our pre-order customers a limited edition steering wheel or webshop voucher. 'Bad customer service' - without specific examples it's difficult to comment on that (and if it involves a particular case it's not appropriate to detail on KZfaq). The support infrastructure is improving all the time.

DomB_Fanatec that’s all well and good, just wanted to provide my customer experience. I really do wish you the best, but it is very frustrating when you say things like “Fanalab launches by the end of May” and then skip that deadline without any sort of notice whatsoever. It does not speak to your regard for your customer base. This market is blowing up. Up your support game and I’d fully expect you to have a firm grip on the sim hardware space. But you have to do it in advance, not after the fact damage control. KZfaq comments are not a great place to win favor. Demonstrate care for you customers, shake the bad rep you have on warranty repairs and you will own the sim world.

You will never be able to feel the exact replica of any type of car. The overall goal here is to have a feeling through the wheel which is believable. The task is generally up to the game to produce the realistic output and pass that output to the wheel. The quality of the wheel determines how good you get that feeling. So these wheel settings are generally there for you to adjust it to your liking.

That was with the old version, the high cpu utilization was already fixed weeks ago with the current version.

@@momorious I was using 1.12, closed the app and smooth gaming so uninstall

That's impossible right now. Either you have a simple closed system like a console or you have unlimited complex possibilities on PC.

No.

I have problems to understand what you want to tell us

Mixed Reality Sim Racing I have a few people in my team who sold their DD2 to purchase a simucube because the forces they use keep breaking the steering wheels available by fanatec. Further more they all acknowledge the software available does not improve the feel as fanatec claims.I tried this for myself and to me the DD2 felt like a 10% improvement in feeling and 50% improvement in strength in comparison to the club sport v2.5. I believe the software is yet to bring out the potential here unlike simucube

Can you describe why you think so? It's an mmensely useful powerful tool imo.

No. It's pc exclusive.

What was the problem?

When I went to run it, if I remember correctly it said I need the driver. But I had use the driver on the site annnnnd went to the forums for the latest driver I believe. But after restarting the computer it kept saying something about the driver.

@@Tyborg425 you need at least 345 as a driver and I know there is an issue if driver or FanaLab is not installed on C drive.

Mixed Reality Sim Racing that’s the problem, I have it on Another drive. I will try again later. Thank you.