Super glad to see someone new in the aftermarket world of OBS fords. Can't wait to see what else you come out with!
@blowingdiesel2 жыл бұрын
Thanks man! Super exited for what’s to come
@montanasnow4062 жыл бұрын
@@blowingdiesel iv been building and restoring them for almost 9 years, thr aftermarket was getting slim there for a little bit.
@blowingdiesel2 жыл бұрын
Oh for sure this last few years they have been getting a lot of love I wish I could have started sooner
@robertfisk83442 жыл бұрын
Have you tried pulling your condenser out and rinsing it cuz there's no air filter in the cab and over the years they do build up a lot of dirt and grime I have a super duty I don't know if yours is the same but you can unbolt it with all the hoses still connected pull it Forward and rinse it. Cuz I just recently did it to mine and man what a difference it made on my truck plus you can rinse the evaporator in the front of the truck pretty much the idea is you're trying to transfer your heat between the two points and if one of the other is clogged up or not flowing good it will definitely suffer in performance just the tip thanks for the video
@gobo161 Жыл бұрын
I just cut one hose going to the heater core and put a manual ball valve in it… I open it during the winter
@blowingdiesel Жыл бұрын
That’s another way of doing it, I just like doing it this way a lot more because it’s once and done I don’t gotta deal with it again
@lobokris28972 жыл бұрын
Got the same rear window on my 90 😮💨 super rare
@blowingdiesel2 жыл бұрын
Lucky!!
@johnross89392 жыл бұрын
What is the window from?
@lobokris28972 жыл бұрын
@@johnross8939 Ford F-350 roll-a-long trucks and big foot edition had them roll-a-long and marke3 also had a 3 piece window electric
@robertfisk83442 жыл бұрын
That window is really really cool wish I could do that to my truck other than that your brackets look absolutely be on professional really really nice stuff and got to say I love the fact that you put a lot of attention to detail into all of your work that's a rare quality to have these days keep up the great work
@edgarnieto8132 жыл бұрын
This is first video I watch from you love the channel already buddy! God bless you/ family and your business👍🏼
@blowingdiesel2 жыл бұрын
Thank you I really appreciate that! Same for you
@penas111ify2 жыл бұрын
Gonna get the kit for my 91 here soon
@blowingdiesel2 жыл бұрын
Heck yeah brother thank you!
@bigfordmano52 жыл бұрын
You always show all the new obs mods 🍻
@blowingdiesel2 жыл бұрын
Thanks brother
@chrisoliver80152 жыл бұрын
When your ready to look into stereo setups check out obs interiors. Do really nice work
@blowingdiesel2 жыл бұрын
Oh yeah they do some amazing work!
@USFlagPoleGuy2 жыл бұрын
Great Channel. I'm running a 94.5 F350 with a new rebuild
@blowingdiesel2 жыл бұрын
Thank you! And that’s awesome!
@dougr79722 жыл бұрын
Just ordered your coil buckets, can’t wait to install them
@blowingdiesel2 жыл бұрын
Thank you I really appreciate your support send some pictures once they are on 👍🏼
@anthonygonzales89902 жыл бұрын
Thanks for the great content!
@lukelawson45052 жыл бұрын
I've been looking for that rear glass forever lol
@blowingdiesel2 жыл бұрын
I didn’t even know it was a thing 😂 but now I want it
@johnnyohness Жыл бұрын
Love your videos and your OBS innovations. I have a 94 250 turbo diesel. The only thing I could recommend is please speak a little slower as it's hard to understand you sometimes. You also need to do a voice-over on the AC install as it was a bad mad mic maybe. Otherwise appreciate your channel.
@codymcbride67932 жыл бұрын
Tight video’s bro!
@blowingdiesel2 жыл бұрын
Thanks
@edwardtabanico93472 жыл бұрын
Can’t wait to order that axle swap kit for my 96 obs
@blowingdiesel2 жыл бұрын
When you’re ready brother you know where to get it 👊👊
@stonedragon32332 жыл бұрын
Thanks for your channel!
@flonga23022 жыл бұрын
Badass kit man
@blowingdiesel2 жыл бұрын
Thank you definitely very proud of it!
@terrybaptist795 Жыл бұрын
How showing how to install ac condesnsor thermostat pusher fans on the front the ac air conditioning condenser?
@drummerman11662 жыл бұрын
Hell yeah man! Freakin killed it!
@blowingdiesel2 жыл бұрын
Thanks brother!! Your truck really made the video!
@kalebnaylor75292 жыл бұрын
Love the channel! It’s hard to find someone that want to put the time in for these trucks
@theautodidacticman_ Жыл бұрын
When are you going to run propane injection in your truck? I just bought a complete kit for my 97f350 and will be installing it this weekend. Hopefully it’s worth all the hype I’ve been hearing.
@blowingdiesel Жыл бұрын
Not sure, to be honest the only time I’ve seen someone running it is the guy from powerstroke help but let me know how it goes 👍🏼
@iantiry22714 ай бұрын
I'm interested in some door plates
@armandopimentel6022 жыл бұрын
Hey bro I have a 1994 f150 4x4 shortbed 5.8l and Wana do a solid front axle swap and a front leaf spring conversion can it be done to a gas V8 and if so I'm lost on the difference in gear ratio what gear ratio would be best of a 05 f250?
@blowingdiesel2 жыл бұрын
Send me an email brother and we can talk more about it blowingdiesel@gmail.com
@armandopimentel6022 жыл бұрын
@@blowingdiesel I will thanks for replying
@armandopimentel6022 жыл бұрын
@@blowingdiesel hey bro what solid axles swap would be better for the 1994 f150 5.8l and what would I need would a leaf spring swap be to ruff for the shortbed?
@edgarnieto8132 жыл бұрын
Have you checked your pressures on the Freon while it’s running? Seems like it needs more in it.
@blowingdiesel2 жыл бұрын
Yup I actually just did that and it seems to be right where it should be
@buddyluv54 ай бұрын
I installed this in my 2002 7.3 it only works on ac? Not on Max ac? Is that normal