FAST™ Quick Tech: Installing The EZ-EFI 2.0®

Рет қаралды 317,558

10 жыл бұрын

David Freiburger with Hot Rod Magazine installs the new FAST™ EZ-EFI 2.0®. The EZ-EFI 2.0® works with engines making up to 1200 horsepower and features eight injectors. Here David walks viewers through the installation process and shows off all the capabilities of the FAST™ EZ-EFI 2.0®.

Пікірлер: 171

@spikeafrica 10 жыл бұрын

He really has a gift at speaking clearly and making it easy to understand what he is doing. You need him to explain more installs for you.

@PgUpPerformance 10 жыл бұрын

"If you're a tweeker like me..." well put DF

@jamestraupel2135 9 жыл бұрын

....and the hood is off. Gotta love Freiburger and Roadkill :-)

@RamblinAround 10 жыл бұрын

Looks like a great system....nice job explaining things. I can't wait to see how it runs at the track.

@tonymarbulz1575 6 жыл бұрын

My favorite tweeker.

@mattmopar440 10 жыл бұрын

This system is amazing

@Barkeaters99live 10 жыл бұрын

Great video and good option for my 74' Charger.

@kdknitro 10 жыл бұрын

This should be an option in every car for tech guys. I still love this whole system.

@richsipe 10 жыл бұрын

Love the classic Freiburger rollin' with no hood for the calibration trip.

@DavidOsborne_sprdave 10 жыл бұрын

Closed loop for hotrods. Right on.

@badsanta518 9 жыл бұрын

very much like the thundermax I have on my motorcycle. It looks like an excellent system.

@danamuise4117 8 жыл бұрын

I need one of these!

@oldchevysonthefoothills694 8 жыл бұрын

That car is awesome!

@FASTEFI 8 жыл бұрын

We think so too! Thanks for watching.

@stanleystalvey6185 9 жыл бұрын

Best tech video ever. Like to have this for my custom conversion to van tow my RV trailer and race car trailer climbing 12,000 feet through the mountains cross country.. Should work quite nicely..

@FASTEFI 9 жыл бұрын

Glad it was helpful, Stanley! Thanks so much for watching.

@robbalex1963 10 жыл бұрын

David Freiburger, Great video. Thanks for the initial setup tip. "running phat".

@robbalex1963 10 жыл бұрын

He really has a gift at speaking clearly and making it easy to understand what he is doing. You need him to explain more installs for you.

@johntanner27 9 жыл бұрын

David is the man

@3rdGenGuy 10 жыл бұрын

A few of my friends just put 454 TBI systems on their cars. $300 total parts from the junkyard. eliminates any and all off-road carburetor problems. with a 22% increase in MPG.

@sick_1955 8 жыл бұрын

will be using on a old 350 chevy

@TheGarageWithDennis 10 жыл бұрын

Great video, always wondered if DF would yank the Dominator...looks like he found a replacement.

@RexCars1 10 жыл бұрын

Love it.!!! ( and thank you for using the " BLACK " fuel hardware and not the Blingy stuff ).. Very Cool for sure

@opl500 9 жыл бұрын

Cool, it does CAN

@vw4x4 10 жыл бұрын

This is really cool..

@NickyBoyInc 9 жыл бұрын

Well done.. I have had great luck with FAST and there parent aftermarket Brands like Comp and others. The wait to talk to a tech line person can be long put they are helpful when you do get them on the phone.. KZfaq has helped to improve and grow the aftermarket no question..

@FASTEFI 9 жыл бұрын

Thanks Nick - we're glad to have you as a customer!

@jaredgt500 10 жыл бұрын

classic roadkill style driving it with no hood hell yeah!

@ronaldcolman6211 10 жыл бұрын

Its got all the right sensors, I would think the tune would be up to the user though. Blow through systems aren't too bad.

@jbchev396 9 жыл бұрын

I'm still waiting for the drag strip testing with the EZ-EFI 2.0, any idea when it may happen?

@007longbeach 10 жыл бұрын

I know what I want for Christmas... For my 1968 Chevelle, but first I have to finish the 4 wheel disk breaks! LOL

@eighty4buick 4 жыл бұрын

Check out Blasphemi in the background. That car has really changed over the years🤘🏽🤘🏽

@rompn4x 10 жыл бұрын

I remember when my buddy bought the Edelbrock pro flo efi for his big block truck about 8 yrs ago. He never used it and lost half the parts lol.

@Compcams1976 10 жыл бұрын

Thanks for watching and for your nice words! We'll certainly pass along your input about the touchscreen as well. Thanks again!

@zekeoutdoors 7 жыл бұрын

you guys should do an install video on the fast 1.0 on a stock muscle car. like on the wagon you guys did but with more information and dyno runs and what not

@NSJham 8 жыл бұрын

I have a 77' TA 403 Olds would this be a huge upgrade over my qjet..

@nickoeden 10 жыл бұрын

What ignition box and coil did you use with the dual sync distributor for this segment??

@billyferguson5881 4 жыл бұрын

Great video sir!! Quick question I have a 1986 Chevrolet C 10 small block 350 I’m installing the MSD EFI And one of my questions that I’m trying to get a straight answer to is the PVC valve how should I plumbed that? MSD told me not to run it to the throttlebody? What would your recommendation be?

@cmsracing 10 жыл бұрын

Just wish they wernt sooo expensive!

@azextremesports 10 жыл бұрын

Nice I wish I had the money to buy one

@JoshsCarCorner 10 жыл бұрын

Freiberger is an awesome presenter! If Hot Rod ever falls through, he's got a career in how to videos!

@Fumble 6 жыл бұрын

Do these fit the tube-design K&N Cold Air Intakes?

@803brando 10 жыл бұрын

would love it if it had a plug in for the gm fly by wire gas pedal.

@vanhornjim 10 жыл бұрын

would really like to see the install for the gm ls ez-efi 2.0 is this kit able to accept turbo

@TMXPOZURZ 10 жыл бұрын

i gotta get one of these for my 66 catalina 389.the old 2 barrel just wont cut it.

@nicholasskific4795 5 жыл бұрын

I would love to know dave’s nitrous system and how he has it set up

@dannyaustin7124 8 жыл бұрын

how do you hook the fuel system up to nos with the 2.0

@tdsviper 10 жыл бұрын

Will there be a update with Freiburger. The before and after @ the dragstrip??

@GreenJeep1998 10 жыл бұрын

That system is impressive, and I like the ability to switch between Gasoline and E85 too. While I don't currently own anything that can use this system, I am curious what these cost?

@IvanQuaglia 7 жыл бұрын

there is some EFI kit for 4 or 6 cylinder old engines ?

@tompa96jed 8 жыл бұрын

hi i got a question to u guys. ive got an oldsmobile custom cruiser with an 305 tbi motor what do i need to do to make the fast efi work on my motor im gonna change the motor to an 383 stroker but do i have to do something more to the fuel system?

@ChapmanAutomotive 9 жыл бұрын

will it work with a msd distributor /6al if i dont want it to control timing?

@RegulatorJoe 9 жыл бұрын

Would this system added HP if replacing a stock carb?

@ronaldcolman6211 10 жыл бұрын

Higher detonation resistance despite lower overall efficiency. If you have a big enough carb or injectors you can actually make more power before things go boom.

@opl500 9 жыл бұрын

Will it handle turbocharging or supercharging?

@leo78744 Жыл бұрын

Can this be plugged up to a SnapOn scanner to run diagnostics and troubleshoot powering off and tranny slipping?

@Lancemechanics 10 жыл бұрын

Having a return system for fuel actually heats up the fuel Your constantly bringing it from the tank to the engine heating it up and returning it. Returnless is where you keep your fuel cool. it goes from the tank to the carb. doesn't heat up much.

@thane411 10 жыл бұрын

This system looks great! I can't decide between the throttle body system and the multi-port kit. What are the pros and cons?

@Compcams1976 10 жыл бұрын

Multi-port is usually a little more efficient, but it doe not create a significant difference in performance.Throttle body setups can be more versatile because they fit more common carburetor intake manifolds. Hope this help, thank you!

@302esky 9 жыл бұрын

can you use this item on a weiand 174 supercharger on a 331 ford windsor

@FASTEFI 9 жыл бұрын

opl500 - The EZ 2.0 does not work with turbocharged or supercharged applications, only our XFI systems currently have that capability. Thank you.

@247sizzurtsippin 7 жыл бұрын

FAST (Fuel Air Spark Technology) it's been two years since your post on this... is there going to be a fuel injected carburetor style of set up as a replacement for a blow thru carb? I like not having to run an intercooler thanks to the carb but are you guys making a product like this? Otherwise the only other option is to fabricate a port fuel injection manifold. Which then would require more plumbing for the turbo...

@SteveP-vm1uc 7 жыл бұрын

Hey Dave, how about an update on the FAST system??

@408dodgeram 9 жыл бұрын

i have a 408 small block mopar with a big solid roller and im have trouble keeping it idling right. it will idle fine for about 5 min. then it goes rich and dies. When you try to start it back up you have to hold throttle about half open. I know it he can get it to run correct on that hemi i shouldn't have any problems getting mine to run right. What was done to get this hemi to idle with low vacuum

@GOODTYNESOUTDOOR 9 жыл бұрын

Will this work on ford inline 6 motor

@CBiskitone 7 жыл бұрын

Can this work with forced induction?

@dannyaustin7124 8 жыл бұрын

i would love to see how you installed your nos with thus system

@FASTEFI 8 жыл бұрын

Feel free to give our tech guys a call, they'll have a few questions about your engine and what kind of nitrous kit you run. The number is 1.877.334.8355. Thanks for your interest!

@Moronicsmurf 10 жыл бұрын

I really wished there a video like this showing how to hook up a MSD 6AL-2 box with the EZ-EFI 2.0 ... Its damn confusing really..

@c3dk 10 жыл бұрын

I have MSD 8572 with AL6 box in my 69 Corvette. If I buy the 2.0 would I then have to buy a new distributor, if I would like to run full EZ-EFI timing control?

@Compcams1976 10 жыл бұрын

Yes, you are correct that you will have to buy a new distributor to run full EZ-EFI timing control. You can check out all of the FAST Dual-Sync Distributors here: www.fuelairspark.com/fas/ignition-systems-components/dual-sync-distributors. Thank you.

@FourrierTransform 8 жыл бұрын

Thinking about swapping to EFI from my little Solex 28-32 DIDTA and I'm looking for kits like this basically... I doubt this one would work though? Any help directing my research would be appreciated. Thanks! Great video btw

@FASTEFI 8 жыл бұрын

+samuel pare Thanks for watching! If you get in touch with our tech guys by calling 1-877-334-8355 or emailing tech@fuelairspark.com they will be happy to help you out.

@magicturtleofearth9905 10 жыл бұрын

I hope to se that HotRod in the back finished : )

@Zchef85 10 жыл бұрын

pumping the fuel does heat it up, but drawing in cold gasoline from the tank cools it down.

@gearheaddave9639 9 жыл бұрын

COMP Cams Will this work on my Oldsmobile 425?

@Hitmans30a 10 жыл бұрын

Because you can make more power with it ,

@sick_1955 8 жыл бұрын

what will the whole setup set me back bro

@renguz31 10 жыл бұрын

Amazing product! must be veryy good and fun and easy to install. The touch screen seems to be not too good, maybe if they can make an App so you can run it with an iPhone or cheap iPod or whatever tablet could be good, since they (apple) have a very good touch screen, just a MINOR detail! BUT LOOKS LIKE AN AMAZING EFI SYSTEM!

@owatajrkiam 9 жыл бұрын

while i would love one of these setups for my 69' Dodge with a 418" small block stroker,,i'm still old school and i know what it takes to get a Termoquad run like it should.

@TheCrazysox 8 жыл бұрын

+glen cyr my hat comes off to you sir, few people are around these days who know how to properly tune a carb. I would like to turbo or blow my 318 and this seems to be an easy solution to switch between daily driving and stip hits.

@bjbuschman2 2 жыл бұрын

418?????????????

@owatajrkiam 2 жыл бұрын

@@bjbuschman2 Stroker small block. 69' 340 .040 block w 4.0" steel Callies crank = 418"s

@bjbuschman2 2 жыл бұрын

@@owatajrkiam 58 years and never heard of a 418.I guess with the right build anything is possible.Iv'e learned something new.

@RegulatorJoe 8 жыл бұрын

Would this work on my 460 ig block I really want it to try it out

@Compcams1976 8 жыл бұрын

+Joe's Home Theater Absolutely! Feel free to get with our tech guys at tech@fuelairspark.com or 877-334-8355 for more info. Thanks for your interest!

@FPAUTO 9 жыл бұрын

is there a way to make this system work with a wankel rotary engine, 2 ignition advances, 1 for leading 1 for trailing ignition?

@Compcams1976 9 жыл бұрын

EZ 2.0 will bolt anywhere that a square bore carb will. However, EZ 2.0 requires a clean RPM signal and in this application, an ignition system that operates without input from the EFI ecu (like w/a carb). Something like this will allow a Holley carb to bolt to a rotary (atkinsrotary.com/store/images/P/16476.jpg) and EZ is setup tp replace a Holley carburetor. Hope this helps - thank you.

@enginelife8449 8 жыл бұрын

+COMP Cams does this work on turbo engines and do they get tuned as easily without using a laptop???

@andrenordin2199 7 жыл бұрын

ENGINELIFE

@Califormula 10 жыл бұрын

Can you run a turbo with this Fast setup?

@Compcams1976 10 жыл бұрын

With this system you actually can run nitrous but not turbo. Thank you.

@sirjammer 10 жыл бұрын

did I hear correctly that you only need one controller for two throttle body's? So, can I run two throttle body's on a 12-71 blower, or would I only need one?

@Compcams1976 10 жыл бұрын

For a blown engine, you will need to run an XFI computer. The EZ 2.0 is not compatible with a supercharged engine. At this time, an XFI 2.0 would be the best ECU to run with a dual EZ 2.0 throttle body setup. It can easily run all 16 injectors. Hope this helps - thank you.

@sirjammer 10 жыл бұрын

helps a lot, thanks!

@MrChristmas89 9 жыл бұрын

Would this system work on my bronco or is it ment for more for muscle cars and what not

@Compcams1976 9 жыл бұрын

The EZ-EFI 2.0 could certainly work on a Bronco. Thank you.

@WaterLines333 9 жыл бұрын

COMP Cams I have a question, would it work with a First Gen Chevy Small block? I ask because my dad's thinking about putting an engine management system on it, but a first gen block is a bit behind the times.

@Compcams1976 9 жыл бұрын

Definitely - First Gen Chevys are one of the prime markets for our EZ line!

@cbiggreen45 8 жыл бұрын

+COMP Cams hey is there a system that you would recommend for l-300 ford? doing a 79 f-100 and want to use efi. looking to make a smooth cruising truck that will still get 18 mpg or better.

@1954malberts 10 жыл бұрын

Frieburger should have his own show on Spike.

@Twaffia 9 жыл бұрын

Would it work on a 400 small block ford pickup?

@FASTEFI 9 жыл бұрын

Yes it will!

@1Jaudiel1 9 жыл бұрын

does it have to be a FAST distributor? if so which FAST distributors work with the 2.0?

@FASTEFI 9 жыл бұрын

jaudiel castellanos It does not have to be a FAST distributor. The system will work with any distributor that works with a carburetor, as well as a few other options. Your best bet is to call our tech line at 877-334-8355, or email tech@fuelairspark.com to discuss. Hope this helps. Thank you.

@steveskouson9620 6 жыл бұрын

Just saw a car in the background. The Crusher Camaro, still with the OLD Blown big block. That just dated this for me. steve

@Bulletstop75 10 жыл бұрын

y u no HD?

@King-qv1pd 7 жыл бұрын

Freiburge or anyone else, does anyone know if you need two sensors in the Exhaust or is it just one?

@FASTEFI 7 жыл бұрын

We'd recommend contacting the FAST tech line at 877-334-8355

@King-qv1pd 7 жыл бұрын

Thanks guys. Oh will Fi tech also work with cam gears or do I need a timing chain?

@nicholasskific4795 9 жыл бұрын

Would this system work for a 528 mopar stroker?

@FASTEFI 9 жыл бұрын

Nicholas Skific - Yes, the EZ 2.0 can absolutely work on a 528 Mopar stroker engine! Just make sure it makes at least 8-10" of vacuum at idle. Thank you.

@nicholasskific4795 9 жыл бұрын

FAST (Fuel Air Spark Technology) Thank you for the information

@177SCmaro 9 жыл бұрын

I know you can run E85 with these systems but how about E85 and a supercharger? I've got a small block chevy with a 850 Proform carb feeding a little Weiand 177 supercharger that currently runs on E85 and makes 550-600HP. Could this system be used on such an engine?

@FASTEFI 9 жыл бұрын

Unfortunately the EZ-EFI 2.0 does not support any kind of boost, to do so you will need to step up to an XFI system. Hope this helps - thank you.

@177SCmaro 9 жыл бұрын

FAST (Fuel Air Spark Technology) Yes, but the XFI system is multi-point, isn't it? I'd rather keep the injectors upstream of the supercharger so the alcohol (E85) can keep it cool. Are there any plans to modify or add the option with the EZ system to support boost along with E85 in the future? It doesn't seem like it would take much. Just a boost-compatible MAP/boost sensor and some software, right?

@FASTEFI 9 жыл бұрын

As of right now we don't know of any plans to add boost compatibility to the EZ systems, however, our engineers are working on new concepts every day. You are also welcome to email your suggestion and any other ideas to buildit@compcams.com. Thank you.

@302esky 9 жыл бұрын

177SCmaro MSD Atomic does but only up to 550hp

@177SCmaro 9 жыл бұрын

302esky That's awesome but I don't think that's quite big enough for my motor. Close though. Maybe in time MSD will step it up for higher HP cars?

@tonybroyles2615 3 жыл бұрын

I just don't understand why nobody tells the cost for things. That to me is a big selling point. I have a 440 roadrunner. Would like to have some idea of the cost

@jonathanangel2444 9 жыл бұрын

00:50 Snap-on product placement. 01:27 Where is the Snap-on product placement?!?! Magic I tell you! Magic!

@MRNOBODY023 10 жыл бұрын

how much vaccum do you have on his car, and need to run this system

@Compcams1976 10 жыл бұрын

We like to see a minimum of 8" of vacuum at idle for both the EZ-EFI and EZ-EFI 2.0 systems to work properly. Thank you.

@MRNOBODY023 10 жыл бұрын

COMP Cams 484 cubes and "big solid cam" hard to believe this car has min of 8" of vacuum

@cindys1819 6 жыл бұрын

I want to see what happens when the first EMP event happens or if they just drive into any strong magnetic or RF or electro static field......Good Night!

@andrewerickson7962 5 жыл бұрын

You really think that an emp event is a common occurrence in the hotrodding world or real life in fact what do you think is making your prius go?

@lsrengines 10 жыл бұрын

Isn't a Frieburger video unless the hoods off.

@TheLiquidKnight 10 жыл бұрын

Will it fit engines bigger than two liters (2.0)? ;)

@v8rwd731 9 жыл бұрын

I would like to own a 485 hemi that can rev to 7500 lol. What an animal.

@stanleystalvey6185 9 жыл бұрын

we hope that you have one someday. Dream big.! Make it happen..

@v8rwd731 9 жыл бұрын

Stanley Stalvey Yep! Once Im done with college I am going to get a really nice old muscle car.

@stanleystalvey6185 9 жыл бұрын

Regardless of condition, always look for "one owner" cars that were garage kept for life. You'll get the best results this way and always be happy with your purchase.. Most repairs on cars like this will be minor or cosmetic.. EBay is an excellent source because of the extensive photographs..

@v8rwd731 9 жыл бұрын

Stanley Stalvey I think you are right about that. My current car has a lot of previous owners and is riddled with problems. 1999 mustang GT that's been through a few early 20s owners lol. Its a good car to learn on though. I just did my first engine replacement and I also converted it to run on a carburetor just because I like the simplicity of a carb. EFI is too expensive to fix

@Zchef85 10 жыл бұрын

because it's over 100 octane.

@v8rwd731 9 жыл бұрын

14:28 "if you're a tweaker like me"......... lol

@zekeoutdoors 7 жыл бұрын

I think I'm going to get the ez efi but not the 2.0 for my 340 swinger. sick of messing with carbs

@Irocnrollz 10 жыл бұрын

Damn, no burnouts =(

@TheGilbertsonfamily 10 жыл бұрын

but why on earth would you run E85 on a high performance vehicle?

@ronaldcolman6211 10 жыл бұрын

Because its Frieburger, there's no hood present. Of course.

@r0unders1 10 жыл бұрын

Maybe now this thing can get into the NINES ?!?!?!?

@bladeproject1 10 жыл бұрын

Out of tank fuel pump is noisy. In tank pump is best. Fuel lines they provide are cheap and of course not enough. Only enough line for feed not return. Better to get FI fuel hose and FI clamps at any auto parts store.