Penis.

Pete in a robe chopping off limbs with a sheath hanging from the towel belt. My dude is back.

crypt : an underground room or vault beneath a church, used as a chapel or burial place, ergo, The Knife Crypt. Bricky has been assimilated. He is Borg.

Interesting thing is this knife which cost 450$ comes from country where minimum wage is less than 500€ (ex. taxes). So basicly it is real SURVIVAL knife. You spend your whole wage to buy a knife and try to survive the whole month with it.

You know what’s hilarious? That Pete had to go up to his wife and say “hey, would you mind recording me chopping at a tree in our backyard while I’m in my bathrobe and then ask me what I’m doing?”

It's good to see that Brickie has crawled its way thru rock veins to the new Knife Lab, even digivoluting to Rocky

The backdrop in the new Knife Lab/Kink Dungeon is really nice :) Congrats on the new property

A video from Pete and AKB on the same day? And both are excellent and entertaining? That's a good day for sure!

I feel like the TRC is Symphonic Death Metal whereas the SRK is a bit more Post Grindcore.

The AKB tshirt was a great touch

Pete in his version of "Cast Away". - Surviving

I like all the new filming possibilities and "exotic" locations at the new place. A basement lab, AND a sprawling metal shed. Plus a backyard "wilderness" area, complete w chickens, and of course those majestic beige water tanks.. You've got quite the expanded domain there Pete. Cheers~

I have the kabar jarosz choppa is the same but bigger ! Best buy ever made!

I just got the F1 sized TRC K-1S last week and it’s *chef’s kiss*. Definitely has sold me on the brand and an Apocalypse in the apo finish is on my list of “to get”s.

_Hey, Pete, what are you doing?_ _Survivin'_ LOL, that cracked me up because it hit a bit too close to home. My experience with elmax has been excellent, I really like that steel for a variety of tasks. Really enjoyed the new Knife Lab and of course the surprise appearance of -Bricky- Rocky.

With all those palm branches you could totally get your bushcraft on and build your very own survival Tiki Bar gazebo

So glad you're back and doing your thing. Great vid Pete😊👍

Putting Brickie up there is quite clever. Great job Pete.

How is it possible that your videos keep getting better? I was in stitches all the way through.

I know you were going for Gandalf, but brickies arrival feels more like the return of the king

Not trying to sound posh BUT my Cold Steel SRK is CPM 3V AND was made in Italy! Also I bought a Martindale Australian Army machete for under $40aud. It nails palm fronds!

Pete has the best reviews in this field, Being the average knife appreciating man himself, but still experienced enough to give qualified demonstrations and information about all these knifes and steels, just what most of us out here search for and really need!

So happy for the new dose of chaotic good that is Pete.

I'd take the srk and a junglas 10" for all that cash tbh.

"SURVIVIN' " barely Pete, barely

Trimming trees how you did in the beginning is how they end up stressed. The short little branches that grow out far below the crown are water sprouts. They are expressed when stressed, and are a warning the tree might not last if conditions dont change. Does it really matter? Eh, your trees will probably be fine. Am I a tool who studies trees? Well, yeah... But you might really enjoy the utility of something like a silky pocketboy for tasks like that

Thumbs up simply for the intro “what you doing” “survivin”.

I ran into the same problem with a $400 Fiddleback Forge knife. It looks so beautiful!!!

It's nice to see rocky again. I feel your pain on the palms. Nearly everyone on the gulf coast thinks palm trees when landscaping. There are other trees out there.

Just because it's a robe don't mean it's not tactical.

Elmax, have a love hate relationship with elmax steel. You know, love to hate it, but hate to love it. I make knifes as a hobby, and did a few in elmax, its a pretty brittle steel, definitely not for chopping knifes. The only stainless steel I would make as a survival knife/chopping knife that works is AEB-L or Nitro-V. Tried to chop through a mailbox some weeks ago with a chopper I made with one made in Nitro-v, took a chip, but nothing massive compared to what I did with it. And it works great, in fact AEB-L and those type of stainless steels, are better and tougher then a lot of carbon steels out there. But elmax, last knife I made had to temper it for almost 12 hours, and its a lot less chippy and brittle now. That TRC is thick sauce, and at a knife that size would work as a survival knife, if it was any longer and bigger, then Elmax is a no go for chopping. Its impact resistance is for shit.

Thanks for the review and keep up the great work! They should go for 3V I guess... Much love from Switzerland

80vrv2 is very underrated , winkler makes one of the best heattreats , edge holding isnt the same obvious but is so easy to sharpen in the field its mind blowing

“Hey Pete? What you doing?” “Survivin’” 😂

I would rather use high carbon steel knife for that kind of use. Having chips in a blade that expensive would be kinda heartbreaking. But I respect your willingness to use the knife to the fullest, regardless of the price.

Hey Pete, maybe it's the holiday spirits talking, but you seem like a fellow who I'm bummed out is in my life only digitally. Just signed up for your Patreon, thanks for the hilarious and useful content. Best of luck to the Family!

Amazing knife. Amazing finish. 👍

I missed seeing Crusadax! Seriously, one heck of a knife there. Being a folder guy, that's one fixie I would buy and use. Great steel and love the size.

Pete your reviews were missed, glad to have you back! ...do we need to start a go-fund-me for a new table?

brickie is the hero 2021 needs

It's interesting that the Apocalypse pressed the right buttons when the AX-1 didn't. It would have been great to see you do a head-to-head between the knives.

Audi and Mitsubishi philosophy example! With you on that one!

Way off track here but you could bury the fronds in Hugel culture fashion to enhance the soil. Awesome video! Hilarious and informative!

Wow, your tan is amazing. I have the same tan, but you pull it off much better

Rocky turning on Pete for accommodating his request though... it's like trying to reason with a brick wa...OOOOOOOOOOOOOOOOHH.

Glad you’re back, and “rocky”. Are you planning a review of the new worksharp sharpener?

You can not deny Bricky.

I have all three of the TRC apocalyptic series their well-built knifes

I went on a corona induced spending spree and bought the south pole biohazard finish, mille cuori and apocalypse biohazard finish. All amazing knives and im still happy with my purchase. Finish and materials on these knives makes them value for money in my book. Cheers from Melbourne.

It is a Great vídeo!!!!! Very good!!! Please could you compare the TRC Apocalypse VS Bark River Fobos legion VS Fallkniven A1, It would be Very Nice!!! I am a big Fan from Brazil!

Always loved this thing, wanted a DBK version bad tbh

Hi Peter I just thought I'd let you know I've had a lt wright jx2 jessmuk cpm 3v, and I found very bad edge problems, just from doing small tasks such as carving feather sticks etc, I've got a knife in m390 and that is a lot better in my experience

Love the shirt, the yellow one!

I'm still saving up for a WCSK

I really like this TRC compared size by side with bark river knives bravo Survivor or Crusader.. please make it!

Pete is being a legend as always

I enjoyed the lil vid in the middle haha and you've confirmed for me that the SRK is the best size and price for a gift for a mate of mine cheers .unless you have a better option ... I could pay up to 200 but needs a finger guard he's new to knives .

I own the previous version of the knife. They have made some changes it seems. Mine does not have jimping (spine / handle) and is in M390.

I don’t know why I am getting Advance Knife Bro vibes at times. 😅 17:12 🤣omg

I didn’t believe in the utility of the towel robe, until my wife bought me one. They are fucking fantastic, warm, comfy, and you don’t need to put on pants! Good choice mate

Have you ever seen the TFK T17 Designed by Eric Outer of the Outer limitless channel? His knife looks a lot like that but has an ergonomic handle with customizable scales. It's also less expensive and you can choose among a couple or few different steels. The blade style is also customizable. Everyday Tactical Vids did a three series set of videos on the knife.

Looks like it'll cut stuff. Good for you Pete, my fixed blades spend 98% of their life in a drawer.

love that blade

Great review Pete awesome knife. Only one question do you have to leave a light on in the knife lab is Brickie afraid of the dark?

Best intro ever...what ye doin...SURVIVIN...take a bow man :D

If you sit a couple inches higher you will have much better leverage and less shoulder hurt with those cuts. Do try and be wary of repetitive stress injuries

Kinda gives off a Busse vibe .Good looking knife .

The TOPS ATM is a great knife for chopping things

"Long hair cat of the plant kingdom" just as zucchini is the mosquito of the vegetable world. Brian at KME is a good guy!

Great to see a knife in your hand again. How did the move go for the kitties?

I think that chicken was laughing at your pink shirt lol just kidding awesome video as always

I have this knife in g10 and the elmax was a big factor to me since you don't want a knife that big with a stainless steel that's a pain in the ass to sharpen also loved the persona 5 music

My fave nutso knife is an A2 fixed blade with a 1/4” thick blade. Just … such a beast dude. It’s very satisfying with how much heft it has. Do I need this thing as I WFH and open Amazon packages? I’d say YES, YES I DO.

For around 1/2 the price you can get an LT Wright illuminous 5 in 3-v. It's an indestructible beast I tell you. I just can't bring myself to spend that much although it is nice Pete.

It’s like staring into my potential future and I love it.

He’s back in the saddle 😁

👍🏼 for the AKB shirt

Palm trees are for people who don't like raking up leaves.

It’s probably not the case over there, but here in California, people will pay a lot to take a mature palm tree off you. I know people that have gotten two unsolicited offers of around $10k for the tree in their front yard. Also heard of people stealing trees from public land or while people are on vacation

How's it stand up to the halfbreed large bush knife?

The opening to this is where I see myself in 10 years.

I was ok until the potatoes. Now I'm hungry! The SRK is also in 3V bringing it much closer.

It also looks cool

Cold Steel makes the SRK in 2 other steels besides SK5 , and the fit & finish on both of those knives (San Mai and 3V steel) are 10x's better than the SK5 version. In the US the San Mai version is about $120 and the 3V is about $170 and Both are worth the extra money...👍👍

Disappointing that the scales are not easily replaceable.

Rocky had some good points

That QSP knife looks like a Bison QS134. Trusty little bushcraft knife (if you don't abuse it). :)

Love all the Persona/Fire Emblem soundtrack integration.

Sun safety Pete !

I like how the segment after Forged in Penis was Tip to Tang, followed up by Size Comparisons.

I'm gun shy about buying knives right now. The last two knives I bought arrived messed up. Maybe a fixed blade is what I need to get next. Can't mess that up.

some options to peruse: The Knife Dungeon; The Knife Crypt; The Blade Bunker; The Underground Madlab; The Nether Lab

Ever encounter weird or scary Aussie spiders or snakes? Looking at you tugging on the palm tree and generaly tooling about in the yard I had this thought.

Its said, in Australia, In that tree, there are 178 bugs hidden in there, that will kill you.

The dbk boys did the 5 knuckle shuffle over this one to.

Just get an esse 6 from knife connection and then strip the powder coat and add a patena. Will get same results with less than half the price in my opinion.

11:40 Test it on dispatching one of those chickens.

Lagunas battle theme is still my favorite.

Stefon's guide to youtube: "This is the hottest video in town. It has a man chopping palm trees in a robe, an insulting rock, and some wicked tan lines"

Better ergos in the FKMD, Lionsteel, and Viper lines at the £150-£175 range... But, beauty is in the eye of the beholder...