How To Re-Gel Coat A Boat - DIY Cheapest & Easiest

No video

How To Re-Gel Coat A Boat - DIY Cheapest & Easiest

Рет қаралды 237,814

Күн бұрын

Gel coating seems to be a big Mystery to many people! It doesn't have to be! I will show you the TIPS and TRICKS, along with gelcoat HACKS that we use in our Boat building and boat repair business to get professional level results time after time. There is a process that needs to be followed, and a basic understanding of the materials is needed. That is why this is a full-length video, with every step from surface prep to the last coat included. It is very important to follow the steps, or you may not be happy with the results! So, join us in our boat shop as we make this boat look like new again! If you find this video helpful, please remember to subscribe, like comment, and share! Thanks for watching!
________________________________________________________________________________________________
www.fiberglasswarehouse.com use code FISHBUMPTV for 15%off your 1st order.
patreon.com/FishBumpTv
_________________________________________________________________________________________________
Amazon Affiliate Links:
3M Half Face Reusable Respirator amzn.to/3wAAWc2
Respirator Cartridgeamzn.to/3wNYtpG
Fiberglass Warehouse Gel Coat no wax amzn.to/3PXfyUY
Wax Additive amzn.to/49DgwwO
Styrene Monomer amzn.to/3Q17OBj
Bosch Grinder 4.5 in amzn.to/3HgniN7
Bosch Grinder 5 in amzn.to/3NZz42e
Dewalt Grinder amzn.to/3vvMIE2
3M Cubitron II Fibre Disc amzn.to/48uzdml
Mixing Containers amzn.to/45qafTs
MEK Peroxide Dispensing bottle amzn.to/47A3rEH
Gel Coat Cups amzn.to/3shBQrA
Tray Liners amzn.to/47E7xvj
Paint Trayamzn.to/44eMdtI
Work Light amzn.to/3J1m3lB
Respirator amzn.to/3RXQUUt
Tyvek Suit amzn.to/3RXWoh... Cups amzn.to/41Y3CY7
Brushes amzn.to/3RZlbCs
Acetone - amzn.to/3tMTUes
Heavy duty drum fan - amzn.to/48K6aej
Gloves - amzn.to/41OpwNk
Shop Towels amzn.to/3vsRdiC
Paint brushes amzn.to/48K8aDv
Safety Glasses amzn.to/3vSSqN7
As an Amazon Associate, I earn from qualifying purchases.
_________________________________________________________________________________________________
how to fix chipped gelcoat, how to restore gelcoat on fiberglass boat, prepping fiberglass for gelcoat, gelcoat or paint for boat, how to apply gelcoat to fiberglass, how to do fiberglass repair on a boat, how to repair fiberglass boat transom, gel coat Gelcoating gelcoat fiberglass gelcoat repair shower repair RV gelcoat repair boat gelcoat best gelcoat repair video boat building how to use gelcoat gelcoat work
fiberglass fiberglassing how to fiber glass how to fiberglass fiberglass over plywood fiberglassing plywood fiberglassing tips and tricks best way to fiberglass marine plywood fiberglassing plywood resin coating boat repair with plywood boat floor replaced with plywood boat transom replaced with plywood boat stringers replaced with plywood plywood in a boat is plywood good in a boat weatherproof plywood boat repair boat building building boats with plywood custom built boats

Пікірлер: 447

@FishBumpTV 4 ай бұрын

We have made Patreon ( www.patreon.com/FishBumpTv ) available for members who are interested in consultations on their projects. Thank you for your support!

@davideckman5203 Ай бұрын

You're one of the most informative channels on this by far. Thanks!

@FishBumpTV Ай бұрын

Wow! Thank you very much!

@Bigtplease 7 ай бұрын

Love learning from someone who enjoys what they do . Your years of experience show in your ability to do the work rapidly without waste of effort and all the while telling us everything we need to know . All we have to do is listen. Thanks for giving back what you have learned.

@FishBumpTV 7 ай бұрын

Wow, thank you!

@user-vu4yw8fl6d 2 ай бұрын

Incredibly helpful for someone new to working with fiberglass boats!

@FishBumpTV 2 ай бұрын

Glad it was helpful! Thanks for watching and commenting!

@wendygeorgedial7079 5 ай бұрын

Good call on the mask. In future videos you might consider mentioning organic vapor cartridges for the paint and acetone. Many folks would not realize that there are mask cartridges specific to the airborne hazard; particulate cartridge for dusty work, organic vapor for paints and chemicals, etc. I'm planning to gel coat my canoe so I'm paying close attention. Thank you.

@FishBumpTV 5 ай бұрын

Thanks for the suggestion and I appreciate you watching!

@anthlaron 4 ай бұрын

Great videos. I appreciate when you do cover the tips that would be otherwise obvious to an experienced person, because skipping over the obvious is often the issue that makes a simple project more difficult. The way you are constantly teaching as you go about the project is very helpful. Keep up the great work!

@FishBumpTV 4 ай бұрын

Wow, thanks so much! I appreciate your thoughts and suggestions!

@lonadkins9682 29 күн бұрын

Thank you for all of the tips, will be my first time re-gel coating a boat!

@Cptnbond 7 ай бұрын

The channel is growing fast since it's excellent. Your comment shows great knowledge, and I congratulate your fantastic cameraman. Cheers.

@FishBumpTV 7 ай бұрын

Wow, Thank you so much!!

@Jimmyfisher121 3 ай бұрын

I am a complete novice on boats and this is making the project I have taken on much less scary as hell down to just worried, I bought a FairLine Vixen 1979 and to be honest she is in not bad a condition for her age, however at 63 years old, disabled, army veteran my family are thinking I am crazy but they are trying to be nice about it, my 2 adult sons are doing their best to help but both have kids and all the ones with kids know, it is very time consuming and working just becomes, well some of you know how it is, wish me luck and Thank you again for giving us and me the courage to fight the good fight and help the old girl back to condition to sail the seven seas, well one that is really close to the coast if I am honest, the Sea Fox will sail again.

@FishBumpTV 3 ай бұрын

Glad the videos are helping to answer some questions and relieve some of the stress you are having! It is a learning process for sure, even if you have experience with fiberglass, each project will have its own challenges! But it is very rewarding to see a older boat brought back to life! I wish you the very best with your restoration project, and appreciate you watching and commenting!

@Jimmyfisher121 3 ай бұрын

@@FishBumpTV Thank you.

@JohnC2u 2 ай бұрын

Can a similar process be followed to fill spider cracking around decking and topside? Or is there a link to another video you can share? Thank you

@danahawthorne1633 3 ай бұрын

Thanks Captain Joe. Love your teaching.

@FishBumpTV 2 ай бұрын

You are very welcome! I appreciate your comment!

@jmac6242 9 күн бұрын

Great content, excellent video. Look forward to more, knowledge is power. Can't have too much!

@FishBumpTV 9 күн бұрын

Thanks! More quality fiberglass and gelcoat videos coming soon!

@alexsails80 7 ай бұрын

Awesome narrative - show and tell in a real shop environment. Lots of people can relate to your processes which are totally doable as a diy.

@FishBumpTV 7 ай бұрын

Thanks so much! Glad you are enjoying the videos!

@kenfyoozed387 7 ай бұрын

Uncle Joe, great video. This is what I needed to know to regelcoat my Blazer Bay. I loved their part where you said every man needs three boats. Amanda said we can’t hangs out now because of that!😂

@FishBumpTV 7 ай бұрын

Haha! That's too funny! Glad to help!

@Knape-vz5ml Ай бұрын

You are giving great working info,for anybody that is planning to do any fiberglass work.

@Artist_Kevin 4 ай бұрын

6:37 definitely. Looking at investing in a 1980s trawler "handyman special" and all of the fiberglass, jell coat and repair videos are very useful and informative.

@FishBumpTV 4 ай бұрын

I have always thought it would be great to own a trawler! Glad you are enjoying the the videos, and hope they are helpful with whatever you end up working on!

@doug2202 7 ай бұрын

Love the videos capt. Looking forward to to some higher end re gel coating. Would love to see how Togo from the waxed coat to shine

@FishBumpTV 7 ай бұрын

Thanks so much! I will try to get something along those lines out for you guys!

@jaisonlee007 7 ай бұрын

Video suggestion… a video on how you seal and glass your PVC rigging tubes into your bulkheads and stringers. I noticed you have a unique way of doing it.

@FishBumpTV 7 ай бұрын

Working on that right now, so stay tuned!

@jaisonlee007 7 ай бұрын

Awesome because I’m right about at that point now in my boat build. I’ve used this channel to to get me this far in my first boat build!

@richardlinebackii8558 3 ай бұрын

Thanks for the video. I have 0 knowledge about freshening up boats. I have a tiny 2 seater speed boat my late uncle gave me when I was a kid. It's called the rescue ranger because at 7 I would go out and toe broke down boats and jetskis with it. I'm going to dig in and get it back in the water this year or next. Thanks for explaining everything instead of just a time laps.

@FishBumpTV 3 ай бұрын

Glad it was helpful! Thanks for watching and taking the time to share and comment! I wish you the best with your 2 seater restoration!

@paulwelch5570 Ай бұрын

Trying to watch a lot on gel coating before I do a boat great video

@FishBumpTV Ай бұрын

Thanks, glad to help!

@qsarkiss Ай бұрын

i refit my 40 footer (an Oyster SJ41 for those 80's boat enjoyer like me) with all the tips i learnt here, because i love the capacity of Gel coat. So useful to have the process, the tools, the conponents, an understandable english (i am not an English native) and the tricks in a same place. As in one of your video, you said we could bring our 2 cents : the best tools i discover to clean the gel coat excess (when filling my stress crack) is the Bahco Scraper (maybe there is other scraper, but this 650 mm Scraper worked perfectly for me), very smoothly used, it is just marvelous : i smoothly scrapped all the gel coat excess on my hull in one afternoon), thanks for the trick with the blue tape to mark all the tiny spot to be treated.

@FishBumpTV Ай бұрын

Glad you are enjoying the videos and I appreciate your 2 cents on the scraper!

@WereAllThatBored 7 ай бұрын

Another benefit of switching to a pan is that it thins the pot depth and will slow down the kick. Old boat builder I know used to pour his epoxy and poly into a cookie sheet to thin the depth out.

@FishBumpTV 7 ай бұрын

Yes, that is right, thanks for watching and commenting!

@54cwalt 5 ай бұрын

First time sail boat buyer (fixer upper). Thank you for showing the basics and explaining steps to novice boaters.

@FishBumpTV 5 ай бұрын

Welcome to the channel! Glad to help!

@markmac9515 7 ай бұрын

Perfect timing, just in the middle of re gelcoating my boat.

@FishBumpTV 7 ай бұрын

Awesome! Best of luck with your project!

@ericcope8216 Ай бұрын

Great video, thank you. I just pulled a 8x20 skiff out of the woods, been sitting there for 10 years. You'll be hearing from me!

@FishBumpTV Ай бұрын

Thanks for watching and commenting!

@racerxv6valvoline424 Ай бұрын

Came across this just today. I have been wanting to get into glassing and gel coating and you make this look so easy. you are very easy to listen to and you explain this in terms that us padawans can understand. Thank you for this video and looking forward to more content. I did Sub to the site and did like the video.

@FishBumpTV Ай бұрын

Awesome! Welcome to the channel and thanks for subscribing!

@raystomberski4480 5 ай бұрын

You do a great job on info and videos on this, I will be watching all the videos thanks

@FishBumpTV 5 ай бұрын

Awesome, thank you!

@larrybenson3514 7 ай бұрын

I'm getting ready to change my 30 ft boat frome single inboard to twin outboard. I have to build up transom ,close up holes from prop shaft and rudder. Then install gas tank and redo deck. Thanks for all the information in your videos.

@FishBumpTV 7 ай бұрын

You are very welcome! Best of luck with your project!

@TropicTrdr 2 ай бұрын

First time visitor here who is considering fixing up a cheap used boat where I live in Florida. I definitely like that color since I'm retired from the Navy! I forgot about those brush hairs; we clamped the metal bristle band with pliers before using them but there's probably a better hack by now. I think the coatings have come a long way since I painted the Boston Whaler I had 30 years ago.

@FishBumpTV 2 ай бұрын

Welcome to the channel! Yes, I have always liked Grey boats, they just look tough! Thanks for watching and commenting!

@henryatencio221 7 ай бұрын

Excellent videos capt! keep them coming...Thanks

@FishBumpTV 7 ай бұрын

Much thanks! Will do!

@FishBumpTV 7 ай бұрын

Much thanks! Will do!

@kevynvossen2027 4 ай бұрын

Love your channel super helpful about to start doing my own fiberglass and get coat attempts on my boat for the first time and definitely ending up on your channel more than anyone elses. going to start with spider cracks and work my way up to making a new bulkhead.

@FishBumpTV 4 ай бұрын

Wow, thanks so much! Best of luck with your project!

@dwayneroberts6616 3 ай бұрын

I'll be doing the same. I'm that guy that has to repair a fairly deep crack that I think is a impact crack. It's under the boat so I'll be doing a lot of over head work. I plan on using a dremel to grind the crack out to widen it and grind until I hit fiber glass or the crack is gone. I'm hoping the glass is okay so I can just use a polyester filler and gelcoat paste to repair. I was hoping to use gelcoat paste to refill the crack if I don't have to do any glass work. I just don't know if that's okay? It seems like it would be. All I'd be doing is using the same material gelcoat that I removed.

@raybrennan3096 6 күн бұрын

Been watching your boat build great job! Learning a lot from you Mark, Jordan and nice to see occasional Mom sightings taken an interest in your channel. I did just like and subscribed and shared your channel with some like minded friends of mine hear @ Point Pleasant The Jersey shore. Thanks

@FishBumpTV 6 күн бұрын

Thanks so much for watching and subscribing! We have alot planned for the channel, and new videos coming soon, so stay tuned!

@scottmcadams9355 Ай бұрын

Just subscribed, I am learning to repair small areas on my boat. Holes, chips and cracks in gelcoat. You are doing a great job with being very informative and explaining the work so it's not too intimidating . Keep up the great job. Scott (Skeeter)

@FishBumpTV Ай бұрын

Awesome, welcome to the channel!

@ginfizz20 Ай бұрын

Last time I said I'd heard of gelcoat but didn't know much about it. Thanks to your posting I'm getting a handle on it. Thanks !!

@FishBumpTV Ай бұрын

Glad the videos are helping you with a better understanding of gelcoat! Thanks for watching

@JohnWillTV 7 ай бұрын

Keep the content coming brother your the man!

@FishBumpTV 7 ай бұрын

Yes Sir! More vids on the way!

@josephhiggins4087 7 ай бұрын

Joe your channel is brilliant, I cant wait to get glassing roll on the spring.

@FishBumpTV 7 ай бұрын

Wow, Thank you so much! Best of luck with your projects!

@Lukegolliday2 6 ай бұрын

Wow, this is great. I previously re-gelcoated a 19 ft skiff. Your view on the final end goal and tips along the way were spot on. Keep this up! Very realistic and to the point, love it!

@FishBumpTV 6 ай бұрын

Glad it was helpful! Thanks for the comment!

@Tomthatmetaldetectingguy 2 ай бұрын

Wow. The amount of knowledge you crammed into that video is crazy! I got a 13' wagner powerskiff for free a few months ago (first boat). The 40hp engine was shot. I got a good deal on a 23' yamaha f50b scratch n dent. Now I've re-done lights, wiring, trailer as well re-done. Then I started replacing screws and circle hatch o-rings. Now I'm thinking the rail around the perimeter (rubber) needs replacing, and I have some cracks at the rail area. So here I am🤣 first video on paint. Great one! Looking forward to the ones I'm about to watch. Also, inside the circle hatch at the bow storage/anchor area, inside the hull, below deck, I looked in with a light and it looks like the fiberglass on the inside angle of the keel? Line? Front vertical center is peeling/delaminating. Is this worrisome? Boat is 2000 wagner powerboat. Which is a hobie powerskiff clone. Thanks for the wisdom 💪🙏

@FishBumpTV 2 ай бұрын

Sounds like a great project boat! I don't really like to see any fiberglass peeling or delaminating, but it usually isn't that big of a deal. I would use a grinder to remove the damaged or delaminated glass, then rebuild it with fresh fiberglass and resin. I have been really impressed with the vinyl Ester resin that I have been getting from fiberglass warehouse. They also have a discount code for fish bump tv viewers that should save you some money. I hope this helps and best wishes with your boat project!

@user-fk6cx6xw1u 7 ай бұрын

Fish bump family Awesome video and this is a absolute YES indeed more videos are so helpful tips and experience into the fiberglass/gelcoat application Thanks for your time!

@FishBumpTV 7 ай бұрын

You got it! Thanks so much for watching!

@tomislavoscarsson9502 2 ай бұрын

Thi is so helpful for a beginner diy small boat owner. I will probably do this to my newly bought boat. And i searched to intenet for esey and helpful explanation on how to. This clip does make sense and explains it in a nice way too a beginner like me.

@FishBumpTV 2 ай бұрын

Glad it was helpful!

@user-fk6cx6xw1u 7 ай бұрын

Capt Joe in my last comment was hoping to see videos working with expanding close cell foam and really love to see some fiberglassing CSM over fir plywood you know old school glassing Thank y'all so much for your sharing family legacy God bless moving forward!

@FishBumpTV 7 ай бұрын

Great suggestion! I will try to add that to the mix. I appreciate you watching and commenting!

@prestonlong4352 6 ай бұрын

Great video, I like the pace. To the point descriptions and explanations and don't show every detail dragging the video out for hours.

@FishBumpTV 6 ай бұрын

I appreciate that! Thanks for watching

@camcutcnc 6 ай бұрын

Hello, You asked for comments on content, so I love what you are doing and I am subscribed of course. There is almost nothing out there on chopper gun use. I purchased a small chopper only gun and am building it out to spray resin an catalyst separately. that is 3 streams. I build 1932 and 1934 Ford hot rods. They are small cars, but big enough that I am tired of hand layup. The small chopper system seems like the ticket. I am guessing that a lot of other people would be interested too. Sometimes you don't know that you need something until you see it in action. The first time I saw a CNC milling milling machine running, All I could say for 3 days was WOW !! Now I have 8 CNC machines. Great channel !!

@FishBumpTV 6 ай бұрын

Thanks for watching, glad you are enjoying the videos! I will try to do something with our chopper rig for you guys. I appreciate the suggestion.

@c.a.mcneil7599 6 ай бұрын

You do a great job explaining your application process

@nickwatson2786 7 ай бұрын

This channel is awesome .. will recommend it to my friends

@FishBumpTV 7 ай бұрын

Thank you, that is much appreciated!

@ZEROOOOOOOOOOOOOOO00 19 күн бұрын

New viewer here.........looking to learn how to do fiberglass and gelcoat repair. Carry on.

@FishBumpTV 18 күн бұрын

Great! Welcome to the channel and thanks for watching!

@chrome-andy 7 ай бұрын

Great stuff. Always follow the three P’s.

@FishBumpTV 7 ай бұрын

Thanks so much!

@michaelkokkola3681 2 ай бұрын

Correction every boater neads a houseboat, ski boat, surf boat and a sail boat with of course a dingy

@FishBumpTV 2 ай бұрын

Haha, I like it! Thanks for watching and commenting!

@christianlatuso4616 Ай бұрын

I regret selling this boat everyday! But I’m happy it’s getting the love it needed

@FishBumpTV Ай бұрын

It's a great little boat! You could always get another one and fix it up! Thanks for watching

@leenhamoen4171 4 ай бұрын

Im fixing a mini dutch spitfire with a 5hp 2stroke motor for my son for this summer and your video's are going to help me allot. thankyou for your simpel straight forward no nonsens explaining of the work i need to put in and some of the costs it will be to fix it the right way. 👌👌👍👍🤙🤙

@FishBumpTV 4 ай бұрын

Nice! Sounds like a great project! Thanks for watching and commenting

@bigpistol2 6 ай бұрын

Another video suggestion, what's the best way to repair spider cracks in gelcoat? My boat is full of them!

@FishBumpTV 6 ай бұрын

I will try to do a video on that soon for you guys. Thanks for the suggestion!

@MrDangadave 7 ай бұрын

Just one suggestion, could you put up metric measurements and temps in the post edit. Most of the world tends to measure in units of 100 and not in hands and feet, horse shoes, acorns. 😂. I'm learning so much so thank you from Australia 🦘🦘🦘

@FishBumpTV 7 ай бұрын

We are working on that for you guys! Thanks for watching

@fretinit 6 ай бұрын

Keep up the great videos! Awesome content

@FishBumpTV 6 ай бұрын

Thanks! Will do!

@bigartscustomrods Ай бұрын

Excellent videos they help alot , Thank you !!

@FishBumpTV Ай бұрын

Glad to help! Thank you for watching!

@Knot_Guilty 2 ай бұрын

Thank you. I’ll be gel coating the under side of my center console in August. It has some scrapes along the V on the underside.

@FishBumpTV 2 ай бұрын

Glad the videos are helpful!

@treyt6765 7 ай бұрын

Love it! Keep the how to do videos coming !!

@FishBumpTV 7 ай бұрын

Thank you! Will do!

@jittabugwallace7486 2 ай бұрын

Just subscribed. Picked up a 15ft hightide this week. Needs a good bit of love and care but I'd really like to restore her. Definitely digging the content. Happy I can roll on my gelcoat. Gonna do a full strip and restore on the gelcoat this winter. Has a '98 70hp yamaha 2 stroke. Gonna get it running this weekend. Keep the content rolling. I need all the guidance I can get. This is uncharted waters for me.

@FishBumpTV 2 ай бұрын

Fantastic, welcome to the channel! I wish you the very best with your hightide project boat!

@mymobile5014 Ай бұрын

I now have some silicone cups and stirring sticks. I also bought a silicone mat. It means once I've used a cup and a stick, I put them to one side and once the resin has cured it simply peels right off. Also for using putty and small amounts of resin for touching up, the mat has the same ease of cleaning. I don't have to buy and store numerous cups and sticks etc, there's very little waste, and tbh it means my workspace is neater and easier to manage.

@FishBumpTV Ай бұрын

Very cool! That's a great tip! Thanks for your comment

@johnyhawgleg 6 ай бұрын

I just found the channel and subscribed. I have done work with fiberglass and different fillers in the past. I did not know however that you could repair/regelcoat fiberglass. I have just painted over my repairs or the whole vehicle/boat. I have learned a lot from the videos that I’ve watched already.

@FishBumpTV 6 ай бұрын

Welcome to the channel, and thank you for subscribing!

@HarryLevinson 2 ай бұрын

Your videos are great. I love all the detail and tips.

@FishBumpTV 2 ай бұрын

Glad you are enjoying the videos!

@GUCR44 2 ай бұрын

I just subscribed to the channel... Learning alot of cool stuff. Thanks man Rolfie

@FishBumpTV 2 ай бұрын

Thanks for the sub!

@tommyphillips7335 7 ай бұрын

Looks great as always capt.

@FishBumpTV 7 ай бұрын

Thanks Mr Tommy! I appreciate that!

@619DUB 7 ай бұрын

Awesome content! Very informative, best of all, No drama for my moma and 100% business 🤘🏻🍻 a lavalier lapel mic would help! But nonetheless, it's great content your putting on! Thanks

@FishBumpTV 7 ай бұрын

Thank You Much! We try not to waste your time with a bunch of Fluff! I appreciate the tip, as the channel grows I can spend a little more money on nicer gear for you guys. A lapel mic would be nice!

@cmenacez8748 4 ай бұрын

Great video man, trying to learn this stuff for my Parker 1801 very thorough and helps a bunch!

@FishBumpTV 4 ай бұрын

Thanks! I have always liked Parker boats. Best of luck with your project!

@user-so4df2rd9t 7 ай бұрын

Really enjoying your videos! Lot of useful tips. I too would be really interested in seeing some more heigh end stuff. Sort of close to gel coat out of a mold finish. Keep up the good work!

@FishBumpTV 7 ай бұрын

Thanks! I appreciate the suggestion!

@ianbell5611 4 ай бұрын

Great video. Lovin the blue tap trick on the roller 👍

@FishBumpTV 4 ай бұрын

Thanks, glad it was helpful!

@makingcookingfixing 7 ай бұрын

Great videos Captain!

@FishBumpTV 7 ай бұрын

Thanks so much! I really appreciate you watching and commenting!

@bustinbass78 6 ай бұрын

Great video. I'm building knowledge to repair my shower surround. The wax additives was eye opening to me. I had to reasearch its purpose.

@FishBumpTV 6 ай бұрын

Glad it was helpful! Thanks for watching

@streamin2605 7 ай бұрын

Just ran across your channel. You've got some good content for sure. Alot of people enjoy the learning aspect of it vs just lets say spray with chop and roll it out. Also some people are scared to do the fiberglass/gel coat just for the fact of not knowing. Its fairly simple just knowing the basics as your teaching. Keep on making the videos like this, there very informative.

@FishBumpTV 7 ай бұрын

Thanks, will do! I appreciate your thoughts!

@seanmarrero3461 6 ай бұрын

Thank you for all this information I will be doing my boat gelcoat

@FishBumpTV 6 ай бұрын

Glad to help, and best of luck!

@jamesdewart1772 6 ай бұрын

Excellent video. Awesome work. I will definitely follow your guidelines where I’m ready for this. Subscribed and closely watching.

@FishBumpTV 6 ай бұрын

Welcome aboard, and thanks for watching!

@MrDangadave 7 ай бұрын

Great channel 💯. Building my knowledge base for the big winter refit

@FishBumpTV 7 ай бұрын

Great to hear! Thanks for the comment!

@stevencroft4850 7 ай бұрын

New viewer here, looking for tips on how to do a small metal flake repair on my old ranger. Lots of good advice here, thanks for putting the video together

@FishBumpTV 7 ай бұрын

Welcome to the channel! We don't really do much metal flake work but I will try to do some research on that for you guys. Thanks for watching!

@sethbarnes7608 6 ай бұрын

Love to see a video on PROPERLY glossing an older wooden boat. You see plenty of guys doing it, well, not necessarily well.

@FishBumpTV 6 ай бұрын

Great suggestion!

@Laserman99 3 ай бұрын

Getting ready to restore our family’s old bass boat. Would love to see a video on repainting a boat that had metal flake.

@FishBumpTV 3 ай бұрын

Thanks for watching, and thanks for the suggestion!

@user-hw3gj4hy4b 6 ай бұрын

I would love to see a segment on stringer repair and laminating procedure and process with both poly and epoxy. Details on how many layers of material and best way to overlap material

@FishBumpTV 6 ай бұрын

Thanks for the suggestion!

@debrisbox 6 ай бұрын

Hey Captain Joe, I just bought an '85 Bluewater Coastal Cruiser, she is beautiful! however her name was changed a couple years ago and on the stern and you can clearly see where the old name was removed from in the gelcoat. You can actually feel where the letters were. I would like to see a video of an efficient way to restore the stern so you can't see the previous lettering. My guess is wet sanding? You are doing a great job with your channel. I finally actually want to do fiberglass repair. I hope for you and your family that this Channel is working for you and your company. Great job! Tony

@FishBumpTV 6 ай бұрын

Congrats on your purchase! Yes, wet sanding with a rigid block and 600 grit, then 800 and 1200 to finish. Then compound and polish, followed by wax should do the trick. Best of luck!

@brandywineangler6748 7 ай бұрын

Definitely enjoy the recent content

@FishBumpTV 7 ай бұрын

Thank you much!

@raygreen9339 7 ай бұрын

Excellent Video. Thanks

@FishBumpTV 7 ай бұрын

You are welcome!

@notagoodusernameleft 7 ай бұрын

Love your approach.

@FishBumpTV 7 ай бұрын

Thanks so much!

@daryllarson9615 6 ай бұрын

love the insight on gel coat Maintenance!

@FishBumpTV 6 ай бұрын

Thanks, glad you enjoyed it!

@jamesparker6017 2 ай бұрын

Coral Gables 🌴🇺🇸 Going to be doing the re jel on my classic 19ft Donzi Hornet deck. Had planned to spray but will follow your lead. Appreciate it 👌 🏄

@FishBumpTV 2 ай бұрын

Thanks for watching! Just remember that this was more of a utility skiff and that a roller is going to give the gelcoat a texture. Sprayed or brushed gelcoat is going to be smoother. You might want to try some test panels first to see what works best for you and your application.

@southbayproducts5371 Ай бұрын

Great stuff Thank you Sir.

@FishBumpTV Ай бұрын

Glad you enjoyed it! Thanks for watching!

@user-fk6cx6xw1u 7 ай бұрын

Capt Joe Thanks for your reply! Would really like to see how glassing a wood transom properly sealing plywood as well as glassing techniques to get the best possible bond to the sides and bottom of the hull tabing in y'all know old school glassing techniques hopefully y'all have enough time for something like this appreciate y'all sharing family legacy!

@FishBumpTV 7 ай бұрын

Great suggestion! I will try to work on that for you guys.

@briefandpointless1255 6 ай бұрын

great vid .. thanks .. once i open a can of pt. i like to punch a few holes in the valley-of-the-rim .. so that when putting the lid back on .. any pt. left in the rim will be forced back into the bucket .. and not squish/squirt out and away of the bucket ...

@FishBumpTV 6 ай бұрын

Thanks, great tip!

@MitchCrumley-is2fq 7 ай бұрын

As always great job and great information

@FishBumpTV 7 ай бұрын

Thanks so much, glad you enjoyed it!

@jeremijalava882 4 ай бұрын

Hey fish bump! Love your work and it has really helped me getting through my first boat renovation, im in the stage of doing some gelcoat and and was wondering if it is possible to gelcoat over the old polyester hull? I have mailing some companies here in finland where i am at and theyre saying that putting polyester gelcoat over the old hull is a bad idea and that i should use a primer, what are your suggestions?

@FishBumpTV 4 ай бұрын

Thanks ! Glad you are enjoying the videos all the way from Finland! Yes, you can gelcoat over a polyester hull< it is just a lot of work if you want the gelcoat to be glossy. It would have to be applied to the hull, then wet sanded and polished to make it shine. Some might say that painting with a marine paint system would be easier. Thanks again for watching!

@MrJFoster1984 6 ай бұрын

Thanks for this video. Enjoying watching along. 👍

@FishBumpTV 6 ай бұрын

Glad you enjoyed it!

@MichaelGarcia-ww9cr 7 ай бұрын

I've been watching your channel and I've learned so much. A few years ago I started on my own boat project and I think it came out fairly well for a newbie. Many older boats have a gelcoat webbing. There are not too many videos on how someone can do webbing on a boat. I think this would be a great little boat to do webbing on. Is there a chance you can make a video on webbing.

@FishBumpTV 7 ай бұрын

Thanks so much for watching! That's a great suggestion, but the owner wanted to go back with a solid Grey. We have done splatter finish many times before, I will video that next time we do one.

@ronf.109 7 ай бұрын

Great instructional video Joe!

@FishBumpTV 7 ай бұрын

Glad you liked it! I sure do appreciate the comment!

@dustsmoke Ай бұрын

I recommend ending videos like this by pulling it out into the sun so we can get a good look at the finished job

@FishBumpTV Ай бұрын

Thanks for the suggestion and for watching!

@bradheath2592 2 ай бұрын

GREAT CONTENT

@FishBumpTV 2 ай бұрын

Thank you!

@skee3000 2 ай бұрын

Thank you for making these videos

@FishBumpTV 2 ай бұрын

Glad you like them! I appreciate you watching!

@gabrielfernandez2904 2 ай бұрын

Love all your videos. I have learned a lot. Question: How can I get a no shine finish with gel coat . I will like a flat black color. Thanks.

@FishBumpTV 2 ай бұрын

Glad you are enjoying the videos! If you add wax to your gelcoat, and you don't wetsand or polish it you will have a flat finish. You might want to do a test panel to be sure this is what you ate looking for. I hope this helps and thanks for watching!

@johnwalsh6237 Ай бұрын

Great video on rolling gel coat!! When mixing silica with gel coat to repair dings, how deep can you use it? I have a few layup voids that are 1/8” to 1/4” deep I need to fill. Thank you for your videos, they are helping a lot with my refit!

@FishBumpTV Ай бұрын

Thanks! A 1/4 of an inch is probably as deep as I would typically go. Any deeper and some fiberglass or filler is probably a good idea. Hope this helps!

@dusty4208 6 ай бұрын

How do you get the shiny look after you gel coat? Is there a clear coat gel coat that applies the same way? Thanks love the channel. I’m a new subscriber. I have a camper with gel coat that is dull and oxidized,. Not sure I can save the black color. Gonna try wet sanding and rubbing it out first.

@FishBumpTV 6 ай бұрын

To get gelcoat to shine, it either has to come out of a mold, or it has to be wet sanded and polished. It is a pretty labor intensive process. I would definitely try restoring your gelcoat first. We have a video detailing the gelcoat restoration process here on the channel. Hope that helps, and thanks for watching!

@user-mv3sr8zq2t 6 ай бұрын

OUTSTANDING

@FishBumpTV 6 ай бұрын

Much appreciated!

@jvkew 7 ай бұрын

This a great how to do it show. Thanks.

@FishBumpTV 7 ай бұрын

You're welcome! Thanks for the comment!

@richardpippin6159 3 ай бұрын

I’m liking this video for my 1967 Hinterhoeller sailboat. The gelcoat is bad. The boat says in a slip year to year. Thanks

@FishBumpTV 3 ай бұрын

Glad to help! Just remember that if you want the gelcoat to be smooth and glossy it will need to be wet sanded and polished out. You might even want to try wet sanding and polishing the old gelcoat first, just to see if it can be restored. We have a video on a dark green gelcoat hull that turned out very good. I hope this helps and thanks for watching!