FITTING 285/75/16 TYRES STEP BY STEP | 2024 79 SERIES LANDCRUISER BUILD PART 1

Рет қаралды 21,537

6 ай бұрын

Nothing is ever simple and this was no different. Our previous shape 79 series Landcruiser was able to handle 33 inch tyres easily, but with the new 2024 updated front end, there seems to be less clearance now. In this episode, we discover that it can be done with a bit of DIY bravery.
Wheels: 16inch x 9inch wide -12mm offset
Tyres: 285/75/16 M/T
USE OUR CODE "SMARTTOURINGSYSTEMS" FOR A 5% DISCOUNT WHEN YOU PURCHASE FROM THE WHEEL DEAL - www.thewheeldeal.com.au

Пікірлер: 46

@zoezoe610 6 ай бұрын

It is amazing how a set of tyres gives a car a total different presence and look. Looks mint. A ally bar powder coated black would get you by.

@fatmanoverlanding 3 ай бұрын

Toyota did the same for the 300 Series. They made the OEM tyre one size smaller, thus making it harder to fit 33's.

@patrickstephens1164 6 ай бұрын

I can just hear the Toyota dealer now,,,, ‘geez mate your have just voided your warranty, you modified the vehicle’

@smarttouringsystems-garage 6 ай бұрын

Yeah probably 😜

@patrickstephens1164 6 ай бұрын

@@smarttouringsystems-garage good luck with the cruiser, I’ve had my 79 dual cab for ten years now, great cars, but Toyota dealers are something i don’t want to deal with ever again.

@craigtomkinson2837 6 ай бұрын

Cool Ep Guys

@jeffgreaves1559 6 ай бұрын

Great vid guy's love your work

@smarttouringsystems-garage 6 ай бұрын

Thanks for watching

@markh6676 20 күн бұрын

Top info mate, do you jack the car up using the radius arms, or diff shaft & pumpkin with the trolley jack?

@smarttouringsystems-garage 20 күн бұрын

Hi Mark. I can’t remember mate. But I know I’ve done either in the past 👍🏼

@courtneymccagh3815 11 күн бұрын

Gday mate. Prob getting the same wheels as ya with the -12 offset. Couldnt quite see but re the front tyres…… do they sit inside the flares? Asking because I’m going for post rego gvm and the engineer will be looking at that for compliance. Cheers in advance n love the vids 👍

@smarttouringsystems-garage 10 күн бұрын

They are touch and go, but mine was engineered with the wheels and tires on it and passed no problem.

@notsnakez1725 4 ай бұрын

Hey mate. Can I fit these wheels without a lift if I cut the mud guards the way you did it? And if they fit would they scrap when lower the tyre pressure? Thanks

@smarttouringsystems-garage 4 ай бұрын

To be honest, they are still a tight fit once the guard has been cut and depending on brand of tire will be very close when turning into a driveway and the suspension compresses. Lowering tire pressure would not affect it to much though.

@v8greg79 6 ай бұрын

They look way cool on the new shape

@smarttouringsystems-garage 6 ай бұрын

Cheers for watching mate.

@inert11 3 ай бұрын

nice upload im about to get one of these BTW whats the milwaukee tool there its one I dont have looks useful. keep up the 79 uploads thanks

@smarttouringsystems-garage 3 ай бұрын

Cheers mate. Yeah it’s a right angle Milwaukee die grinder and has been invaluable with the Lazarus build.

@danielbrady8151 6 ай бұрын

Need to get you a hoist. Save you getting squashed when the jack gives way.

@smarttouringsystems-garage 6 ай бұрын

Fair call! and yes I would love one.

@courtneymccagh3815 3 ай бұрын

Gday mate. Cheers for all ya vids n info. Rims look sick. What are they? Cheers!

@smarttouringsystems-garage 3 ай бұрын

Thanks for watching mate. ROH Assults 16x9 in a -12 offset

@jonathandoncovio3442 5 ай бұрын

Did you get scrub anywhere else? I have put these on my 76 but at full lock in 2nd turning a corner I can feel a vibration, not sure if it’s the front wheel mudflap that needs a trim also?

@smarttouringsystems-garage 5 ай бұрын

Yeah if you hit a gutter at full Lock they just touch the back of the front quarter

@rowenktm 5 ай бұрын

Hey mate, didn't you have a wheel deal discount code on this one? Or was it another video. Ready to buy some..

@smarttouringsystems-garage 5 ай бұрын

Yeah mate use the code smarttouringsystems to receive 5% off 👍🏼

@ARCHIES_79_LC 3 ай бұрын

Hi mate, just a quick question with the neg 12 offset rims is there any poke on the front and rear wheels? Especially the rear with the Toyota tray? Thanks in advance 👍

@smarttouringsystems-garage 3 ай бұрын

Hi Archie. Tiny bit of poke for n the front. Without the rear housing to correct the track it would still be well under at the rear. With the track correction Italy’s perfect mate. 0 offset would still look good to tough, -12 is prob on the borderline of legal in my opinion.

@ARCHIES_79_LC 3 ай бұрын

@@smarttouringsystems-garage Thanks heaps mate for the quick reply on an old video. Appreciate it 👍 I’ll see how I go but I reckon neg 12 will look better with the wide stance, just might have to get those guards that TC Boxes make.

@alanjones8603 Ай бұрын

What 16” alloy wheels are they ?

@smarttouringsystems-garage Ай бұрын

ROH assault in a neg 12

@fathomtheundertaker4356 6 ай бұрын

I was going to swap my 33's from old 78 to new 78, looks like I need to do this mod, thanks for the vid. Do you know if the guard flares of the new 79 fit on the new 78? Aint putting on wider wheels till I get new flares and mud flaps

@smarttouringsystems-garage 6 ай бұрын

Hey mate thanks for tuning in. Not sure about the flares sorry.

@lovelawns 6 ай бұрын

Hey mate, great video. Not sure I can bring myself to chop up the front bumper but no GVM kits available yet.. What offset did you go for -12 it looks like? Cheers bro.

@smarttouringsystems-garage 6 ай бұрын

Yeah mate neg 12. Thanks for watching.

@lovelawns 6 ай бұрын

@@smarttouringsystems-garage cheers mate 🤙🏻

@hurelllucieer6225 6 ай бұрын

Dobinsons have gvm upgrades available for this new update