Subscribe for Daily Ford Truck Videos: bit.ly/2pReEeg​ Check Out More 2021 F-150 Videos: amtrucks.at/38ko35O

Perfect timing for my soon to be bought tires. We appreciate the details & research! 'Preciate y'all!

Great video! I just got a 2022 F-150 and was talking to a guy at the offroad shop about pretty much the exact setup you determined to have a lot of rub. I think the 33" would look great as well, and no rub problems.

0 OFFSET! Love it Justin! Thanks man!

Glad to see all leveling kits for previous models Will fit in a, 2021 im about to order in a 2inch leveling kit

great video! nicely explained

Sweet video, love the comparison of the tire set up's . Save the average guy a lot of money and headaches !!!!

Looking Good Thank you for the info!

I tell you Justin those new F-150s look pretty sweet making me want one. I would have to have 250 with at least 3 .55 Gears of course

Thanks for the video. I am curious the height of the highest point of the cab leveled on the 33”s. Assuming the highest point is probably at the two antennas on the back of the cab? Garage is only 6’6”

I'd like to see 285/75s (34.8x11.5) with without lift as those were recommended in earlier video.

Thanks a lot! I’m on the fence on 33’s or 35’s. What type of modifications?

Thanks for this video

i would really love to see some negative offset on the 33’s. maybe a 10 wide wheel

Man, I wished you guys would have done a detailed step by step install on the leveling kit. There are only a couple of videos available and none show how to disconnect the new 4WD axle from the hub. :-(

From the looks of your above video it barely touches the plastic which you could trim with a pair of scissors.. can't really see the rear crash bar but it looks like a pretty easy fit? By the way what size are those rims are those 18in and 20in or what? And are they 9 wide or 10 wide? Great video by the way thanks. My main concern was hitting the spring perch on the strut on the inner. So I am assuming the 35 1250 with a 0 offset does not hit the spring perch on the strut?

Thanks for info👍

How about show us how it fits after trimming.

I would like to see how big of a tire we can get no rubbing or trimming also

Would like to see a nice 34" X 10.5 combo on 20" wheels!

What is the reason for taking off the axle nut? Sometimes I see the dust cap pulled off and nut spun off but the nuckle stays mounted

You don’t need a level, a lift or aftermarket rims to run 35s on an F-150. The rubbing problems are usually a function of added width rather than circumference coupled with modified wider rims/rims with non-standard offset/backspacing. I run a set of Kenda Klever R/T in a 35x10.5r17s on the stock rims with no lift and I have no issues.

I did a 2 inch and 33's with negative 12 offset. Didn't seem to rub , then I found a killer pothole that threw the front end off. Had it aligned 3 times and it rubs the front and rear crash bars. Any ideas before I trim the crash bars?

What tires are those? I have those same Fuel Vapor 20” wheels, sitting in Toyo Open Country 34’s. All on a 2.5” level

I just got 35s put on my leveled 2021 F150 a couple of days ago. They fit with with the smallest bit of rub on the front passenger rear crash bar. Using a hydraulic RAM i was able to push the rear crash bars back a couple of inches and I didn't have to do any cutting or trimming on at all. It can also be done with a bottle jack and bar or strong length of wood. Feel free to leave me contact info if you want more details. The tires are Ridge Grapplers 295/65/20 on a 8.5 inch wide rim with a +35 offset and I have a 2 inch level. The tires are 35.1 inches and 11.6 wide.

Solid video. My question would be....When does it start to not rub when upping the offset back towards stock? 6mm? 12mm? 20mm?

I have a 2.25” readylift level on my 21’ platinum and fit 295/60/20 nitto ridge grapplers, fuel blitz wheels 20x9 +20. No rubbing or mods.

I have a 2.5 leveling kit on a 2013 Ford F150 XL and running 315/70R17 that are 34.4 inch tall tires on the factory steel wheel and there is a bit of rubbing on the front plastic rubber shield but that is it. While off road and bumpy roads nothing rubs.

What’s the tire and wheel set up for the 33’s?

33’s look fine. Good job 👏

Great Video! It would be awesome if y'all did some of these fitting videos with F150 FX4 trucks. Many leveling kits and all kinds of parts don't work with FX4 F150s. So WHAT DOES work? Would be great to see some of your set ups! The mammoth looks good, but I still see some front end rake. I'm not one for cutting or trimming, so I'd play around with adjusting offset and tire size first; just me. Great set ups and cool video!

How did you solve the issue of the leveling kit being backwards????

how did it drive with the leveling kit? any issues?

Great video! Those 33s do look good. Next up, raptor wheel to bring the offset back in check and try those 35s again maybe? Just borrow the wheels from your Raptor if you still have the stock set-up (can't remember if you do)

I’d like to see 2.5” level with 35” and a stock offset. Show us how to get maybe a 34.8” to fit without rubbing or trimming. A lot of us want a 35” tire without a 4-6” lift. I hear it possible maybe 11 wide instead of 12.5. Let’s make it happen.

What is the wheel and tire set up on the truck in this video?

I would absolutely make the minimal modifications needed for it. I’m running a 35/12.5/17 on my 2011 f150 with a Rough Country 2” leveling kit. I did have to do some in my opinion minor trimming. But with the Fuel Sledge D595 and a -12 offset it’s got a little poke and looks great.

How about LT285/65R20 Stock versus 2.5" lift?

So you didn't need to add the upper control arms ? Or did the truck have them already

Maybe an offset changes this? Seems like a few trucks out there sit on 20” sport rims w 35” AT’s on a 2.5” level? I’m confused

hi, does this also apply on a 22 XLT model?

if I want 33'' tires on my 2.5'' leveled F150 what aspect ratio do I order for my 20'' stock rims...will 33''x12.5x20 fit

Will 35s fit with a 3.5 SST lift kit with the crash bars removed?

I would love to see you guys do a video about the longevity of a front suspension with a 2.5 inch strut spacer. I think how long your truck will last with these installed is a worthwhile video subject.

Is the only parts rubbing is the crash bar and that plastic in front of the tire

Will a 3 inch leveling kit and/or a spacer help?

It looks like a 3" leveling kit would make those 35s work.

I already made my choice. 35's are on the way. And the Sawzall is coming out with the grinder and some primer.

What if u put a 4” life-kit would it work with the 35” ?

What mods to get away with 35? Where was it rubbing?

what if it was a -19mm offfset and the fronnt crash bars removed with icon coil over suspension with upper control arms?

would a person be able to run 33x12.5 on stock rims with 2.5 inch level?

Can you put 35's on a 2020 F150 Lariat with a short lift ? Are the crash bars in the way?

Run a +18mm offset, should fit.

I am looking on doing 3 inch front...4 inch block in back wich is 2.5 taller in back once you remove factory blocks....I still want some rake on the truck since I tow alot ...you think 3inch front...4 back and 1.5 wheel spacers on a factory rim could I get the 35s under it...I did 2.5 and 3 on my last f150 With 305s and looked good but the tires just looked small and this f150 is Alot bigger...yours looked good with 33s but I have the.larger bed and long ass wheelbase I really think I need 35s but it dont want to spend 3k on a 4 inch suspension lift....if ya get a chance let me know your thoughts...THANKS MAN!!

Hello , does anyone know if the stock Ford levelling kit is 2.5?

Great to see that some things don't work.

Can you guys do exhausts next? The MBRP 3 and 4 inch exhausts are out for the 2021's now! Same with Magnaflow catbacks.

Does the 2.5 still have a small rake

I have a 2021 sport 4x4. 295/65r20 on stock wheels 0 rub

Good stuff. Am hoping you can answer a few question for me. I'm new to all these but thanks to KZfaq am learning a lot. I am going back and forth between getting a full size suv like a gmc yukon at4 or denali, or an f150 platinum or raptor, leaning to the f150's. I'd like to level the f150 or lift the suv, say 2-3"s, and add bigger tires. Love the 35's, at least on the f150's, though the 37's on the raptor if i go that route would be awesome. In any case, I see f150's leveled with 2", 2.5" and 3", so which actually levels an f150, and if it's the 2", and you do a 3" level, does that mean you add a 1" lift in the rear, or are you left with it dancing around level but not being exactly level depending on which number of inches you get? And two, the yukons and tahoes and escalades have adjustable air suspension and magna ride. How will a lift on such an suv affect those, affect the air ride? If normal minimal road clearance is 8", and in 4H you can go to 9" and 4L to 10", if you add a 2" lift, does that also raise the air ride, so that normal road clearance becomes 10", 4H can go to 11" and 4L to 12", or if not, does the lift screw up the effectiveness of the air ride? Or is there something to be done to raise the air ride also, and does that cause problems? Thanks. I'm not sure who to ask or where to go to learn about this air ride question.

I have 2021 Powerbost with 33x12.50R20 a 2in level kit and minor shave to inner front bumper. Still rubb at wheel lock. Turns are no problem, but hard u-turns is a rub! Help me! Do I cut lil into support beam bar😱 next?!?!?

That's Odd. How about using the Stock Wheels? I have a 2.5" Leveled 2020 F150 running Nitto Ridge Grappler's 35x12.5x20 on Stock Wheels with no rubbing at all. I think the offset is what your problem is. Why are you determined to use a ZERO Offset for your video? There are many other options out there that WILL FIT. I think Stock Ford 20" Sport Wheels are a +44 offset. I think your video is a bit misleading for people who don't understand what offset is. (Your You-Tube question is, Will 35's fit on a 2021 F150 with 2.5" level Kit?) The real answer is YES but, you have to use the right offset.

would the 09-14 f-150's be the same with 2.5" level and 35's?

What about 34s? Would they work?

What are the specs on those rims?

A little trimming and all is good that's light work

Thoughts on a 34" tire with a 0 offset rim with a 2.5" leveling kit? I'm assuming there will be some rubbing but is it minor plastic trimming or major crash bar trimming?

What size rims?

Thanks for the very informative video. Just got a 2023 f150. If i lift it 4 in, will the 35s fit w/o rubbing?

With the sport 20 inch rims, they are stock 33s that come with it if I’m not mistaken. 275/60/r20.

Yes man

What do you guys think of your V-8 with the cylinder deactivation? any issues so far? Do you notice at all when the cylinders turn off?

Do it with stocks and 35s

34" / 295/70's seem to be best big tire without the fuss of cutting for these trucks

I put 33.7 on my 2017 f150 no problem. No need to change my steering geometry

I love those rims but can't seem to find them anywhere. Anyone know what they are called or where I can find them?

If it rubs at stock height its gonna rub with a level when suspension cylces

Curious if this same set up would work with a 35x11.5x20?

That's why you go with 3in level

Curious about 34x10.5 BFG all terrain KO2's on stock rims with a 2" lift. They measure out at 33.5". Do you think they would fit with no rubbing?

Any f150 guys with a level having to add camber shims?

Did the 2.5 inch leveling kit make the front higher than the back? Just checking, want to buy this leveling kit for my 2021 f150

I just came from 33x11.50 20 to 35 12.50x20 yes they rub, waiting on level kit, 20x9 wheel +1mm offset I'll be doing the install this weekend I'll let ya know if they rub after that...2013 f150 btw

What about 35x11.5

35x11.5x20 no rub the problem is the width not the height

The problem is the use of the clown mall crawler wheels. Look into a true off-road spec wheel, 17” 8.5 inch wide wheel. For a better example look into method wheels. Your welcome

Would 34's fit with the same set up?

Try 35/11.5R20’s instead of 12.5’s

Make mods for 35.

35x10.50 is the way go(295/65r20 with the original wheels)

It rubs a lot for a week after that you’re good stock no lift

Or do all terrain tires so it doesn’t rub

3” level on stock wheels with 35x12.5 no rub

Make the mods

If the tires don't fit, you must acquit!

Get rid of the zero offset garbage. Plus 12mm works great.

The 2" level on 35s, how will or does it effect mpg's?

Trim away baby

Stock offset and 35’s work ?