Fixing a Troy-Bilt TB516 EC Edger [Broken Fuel Lines, Too Much Oil]

No video

Fixing a Troy-Bilt TB516 EC Edger [Broken Fuel Lines, Too Much Oil]

Рет қаралды 17,158

Күн бұрын

This video troubleshoots a Troy-Bilt TB516EC walk-behind edger that was found on the side of the road. The edger included a note stating it needed new fuel lines. It was also discovered that the unit was also overfilled with engine oil, which contributed to other issues.
Replacement Fuel Lines for Most Applications amzn.to/3hHifJ6 (Amazon Affiliate Link)
Enjoy, Like and Subscribe!
Disclosure: This KZfaq video is provided for informational purposes only. If you choose to try one of the suggestions made in this video, you do so at your own risk. Please ensure that you take all proper safety measures before attempting any project. As an Amazon Associate I earn from qualifying purchases (at the links above), however this video is not endorsed by any company, nor have I received any of the featured products as promotional items. I'm just an ordinary DIY'er sharing my experiences.

Пікірлер: 27

@AbedElkassih 3 ай бұрын

I have the same machine (bought used) but the fuel lines are at the bottom of the carburetor not the top like yours, I replaced the fuel lines as you greatly explained, but the bulb will not such fuel no matter how many times I squeezed it. Any expert suggestions? please! model TB516 EC. and thank you for the excellent video.

@BlackHoleDIY 3 ай бұрын

Hi Abed. Is it possible you have the fuel lines reversed on the carbruetor? Try switching the lines and see if that works.

@craig3342 2 жыл бұрын

Excellent video, with clear explanations. Thank you. Very helpful.

@BlackHoleDIY 2 жыл бұрын

Hi Craig. Thank you so much for taking the time to leave a comment. It means a lot.

@craig3342 2 жыл бұрын

@@BlackHoleDIY my comment only acknowledges your thorough knowledge of these types of repair and ability to explain in easy terms. You making the video was time consuming and a credit to those who guided you this far.

@sleve_mcdichael_ 3 жыл бұрын

I have the same edger I bought new. At first I wasn't sure about it with the short pull on the rope start making it difficult to start, but after I got the drill adapter to start it, its is my favorite edger.

@GreyRockOne 2 жыл бұрын

Nice work, I have the TB515, looks the same, working on replacing the fuel lines as you read this. I think on the oil fill decal it says how much and what kind of oil to fill it with, here is a quote from the manual: Refill the crankcase with 3.04 fluid ounce (90 ml or 3/8 cup) of SAE 30 SF, SG, SH oil. Good job! Thanks

@BlackHoleDIY 2 жыл бұрын

Hi John. I really appreciate it. Thank you for sharing the information on the oil!

@RickProefke 3 ай бұрын

Hi, Thanks for the video, I have the same issues, you said fuel line is 3/16 OD, What is the ID please. 3/32 or 1/8 ID ? And mine also has fuel lines on the bottom of the carb. Did they make some with updraft carb, or did someone else take it apart and put it back together wrong? Thanks for your help.

@BlackHoleDIY 3 ай бұрын

Hi Rick. Should be 3/32 ID. Interesting question about the carb orientation. I'm not sure, although it is a bit odd that the fuel lines cross in front of the purge bulb. I'll have to take another look and see if the carb will orient with the fuel barbs at the bottom.

@davidstrohm5918 3 жыл бұрын

yes i have that edger i bought for $5.00. It was missing the blade and belt.It also needed fuel lines .Your video helped me solve those issues .For five bucks it turned out to be a great find.I am subscribed and ready for more lessons.Thank you and The Merriest Xmas for you and your family Ho Ho Ho Dave Strohm

@BlackHoleDIY 3 жыл бұрын

Thank you, Dave. Merry Christmas!

@rmcnamara57 Жыл бұрын

Just found one of these on the side of the road, said it’s free but leaks oil through the air filter. Apparently the top oil fill hole wasn’t the best design choice as plenty of people overfill the oil.

@montellwilliams811 Жыл бұрын

Thank you 👍

@BlackHoleDIY Жыл бұрын

You're welcome, Montell!

@anthonytriolo3643 Жыл бұрын

The hose you are using is larger of the original ,open the hole one or two size over .I had the same problem.

@passdabacon2595 3 жыл бұрын

Problem I have on a curbside 29cc Craftsman edger the blade will not stop turning do you know a way of how to fix it, also after watching your video I wound up buying a new carburetor and gas tank everything installed running fine just now the blade will not stop turning

@BlackHoleDIY 3 жыл бұрын

Hi Frank. You can first try adjusting the idle screw at the carburetor to slow the idle speed so the clutch disengages. Otherwise the clutch assembly may be worn and need replacement.

@raymiller764 Жыл бұрын

If when you push the bulb it fills can you assume the hoses are ok? I think I put wrong gas, the oil gas mix in mine and am trying to trouble shoot it not starting? Also which was is choke and is choke easier to start?

@BlackHoleDIY Жыл бұрын

@raymiller764, yes that's a safe assumption. However, if the hoses are hard or brittle they really should be replaced. You'll want to use the choke for cold starts.

@Ginoinny Жыл бұрын

Why do they make those blades spin the wrong direction like that?!

@larryvidal7641 2 жыл бұрын

Would one work on a cruiser bike

@BlackHoleDIY 2 жыл бұрын

Hi Larry. I am not sure. I dont know all that is involved with modifying a small engine like this to work on a cruiser bike. I imagine it is possible. Hopefully there's someone who reads your comment and is able to provide some insight.