When I put new motor in mine I would go and when I hit break it’s shut off tps was cheap easy fix. So you could’ve eliminated that issue that was bound to happen at any time. Great job fellas. Now hit it with that paint you did on your bumper and side panels and time for a lift 🤙🏻
@NajarOffroad2 жыл бұрын
That’s great that we replaced the sensor now then! Yup it’s looking clean! I have my old 2.5 spacers we might throw own for the time being 😜
@casket_candy2 жыл бұрын
Mine has a weird problem with all 4 02 sensors and I still have no idea what it is. I hope it works out well for you guys
@Love2Wander2 жыл бұрын
Chris cool your WJ is running well
@NajarOffroad2 жыл бұрын
I’m glad it was just the pcm
@Love2Wander2 жыл бұрын
Ours in the shop she was running yesterday sounds nice there just finishing up. When she gets home lift and tires. Hope to see you guys on the trail. Stay safe
@ctdope2 ай бұрын
My gas gauge wont show all the way full, stops almost a 1/4 from full. My 4.7 has issues after cold starts driving around 5 min, then starts to act as if it wants stall, shakes like crazy, only started to shut off 2 times so far. Changed the TPS today, so will see tomorrow. Probably will change IAC also. Temp sensor couldn't change, wont go into intake, dont want to break it. Idk if a "new" PCM would help. Have new O2 sensors to go in also. Hope it runs better.
@Mattmazz772 жыл бұрын
Wow, I definitely don't think I would have jump to a pcm so quickly so good deal.
@NajarOffroad2 жыл бұрын
Yea all the forums kept saying Pcm. So after testing the resistance on the idle air control valve which is new also and replacing the tps and checking all the wires to make sure there wasn’t a short is when I ordered the pcm that was the last thing it could have been
@Mattmazz772 жыл бұрын
@@NajarOffroad I would have definitely read the forums so I guess it would have been possible that I would have changed the pcm after the first 2 test.
@NajarOffroad2 жыл бұрын
Yea what surprised me is the gas gauge was fixed with the new pcm😂 I had checked the wiring to the fuel pump for shorts to haha
@rustyshackelford58922 жыл бұрын
Where did you get the computer? Need one for my 5.9 dakota
@KingOfTheCurves2 жыл бұрын
Hopefully you don’t run into my problem front brake calipers locking down while driving (2000 Jeep wj limited with the 4.7)
@CraigAndrewBruce2 жыл бұрын
Yessir 🔥
@IMV-Pro3 ай бұрын
Do you have a link for the pcm guy on eBay?
@danielhernandez55522 жыл бұрын
Hey what’s man could you do a video on how to remove and replace the front and back bumpers.
@NajarOffroad2 жыл бұрын
Ok that will actually be part of next weeks video for Monday
@danielhernandez55522 жыл бұрын
Najar Offroad right on I have a Jeep wj that I’m slowly fixing up lol
@charleycastillo63652 жыл бұрын
Thank you for all the information. My PCM is bad, where did you order the one for Chris’s WJ from? I need one for a 2004 limited WJ.
@NajarOffroad2 жыл бұрын
I searched on ebay
@charleycastillo63652 жыл бұрын
Thank You. Keep the info coming. Have a good weekend
@Epiclights2 жыл бұрын
Full tune up like spark plugs? Need to do that to mine soon
@NajarOffroad2 жыл бұрын
Has brand new spark plugs and coil packs! We did check them when trying to find why it wasn’t running right. I’m guessing previous owner tried to fix it but gave up
@erict31402 жыл бұрын
How can I program mines.. send me a link of your video please
@NajarOffroad2 жыл бұрын
Program what?
@HoLeeShitUSA2 жыл бұрын
Did you do the SKIM disable on that new PCM?
@NajarOffroad2 жыл бұрын
I don’t think so got it from eBay and came flashed to my vin
@HoLeeShitUSA2 жыл бұрын
@@NajarOffroad I just had mine reflashed to disable the SKIM because something in that circuit was causing it to immobilize my WJ. Still randomly shutting off but at least it's not a security issue anymore lol.
@norcal8718 Жыл бұрын
Yeah I got the same problem it's idling like around 1700 RPMs so I put a IAC and a throttle position sensor which brought it down to about 1,000 rpm's but it is still high. I think I have a vacuum leak from my hoes by the back spark plug somewhere. But anyway was wondering if you got the "death wobble" yet?
@mindofdelta48262 жыл бұрын
Do you know where I could buy a mileage programmed 2004 Grand Cherokee Limited 4.7 gauge cluster?
@NajarOffroad2 жыл бұрын
I am not sure
@illegalcanine83652 жыл бұрын
I got lucky and found one at a pick n pull so try there.
@mindofdelta48262 жыл бұрын
@@illegalcanine8365 Did it show your vehicles original mileage on the new one?
@jorgeaguilar38502 жыл бұрын
How about when rpms jump while cruising At 50-60 mph what would be the issue
@NajarOffroad2 жыл бұрын
Hmm that’s interesting do you get any codes for misfires?
@jorgeaguilar38502 жыл бұрын
@@NajarOffroad misfires yeah
@jorgeaguilar38502 жыл бұрын
Also there would sometime be like whistling noise when I would start it up
@chrisgarage9002 жыл бұрын
@@jorgeaguilar3850 check for vacuum leaks
@jorgeaguilar38502 жыл бұрын
@@chrisgarage900 alright thanks
@micheal233882 жыл бұрын
Lmao Chris is such a goofy guy lol
@NajarOffroad2 жыл бұрын
😂
@illegalcanine83652 жыл бұрын
My wj has always had a rough idle and I cannot figure out why does anyone have any ideas?
@Bukie6782 жыл бұрын
I have a i6 and i had rough idle and i simply replaced the idle control valve and make sure u get a oem piece because i had one from a local autozone and it went out after a year
@jeffreystine70682 жыл бұрын
i would recommend a compression test
@jeffreystine70682 жыл бұрын
Hey Najar!.. im an eletrical issue i believe ive narrowed down to PCM aswell.. the car stalls .. all gauges drop.. skim .. check gauges.. and the gas light come on dashboard.. ive finally figured out when i wiggle the connectors to my pcm it starts back up because i here the relays click. I guess my question is. Is that From the pcm itself.. the connectors.. or a short in any of the grounds? i hope you can help me I dont want to order one or send out my pcm if i dont need to. I am almost positive this started happening right after my mechanic changed my engine mounts. I belive he had to remove the pcm or atleast move some wires around it to do the job. Any help guys would be great im so close to my WJ being 100% road reliable. Thanks in advance for any help!
@NajarOffroad2 жыл бұрын
Take off the plugs and make sure the wires are in good by tugging on them. Also check your battery terminals! I had something similar and it was caused by a bad connection on the battery
@jeffreystine70682 жыл бұрын
@@NajarOffroad i cleaned battery.. and cleaned up most of the grounds.. i think ive missed 2 grounds.. i also noticed my ground straps are old and dirty i may get new ones.. re attached the connectors.. i bought some electronic cleaner and will clean each attached part.. im also going to remove entire pcm in about 5 minutes and check the ground connection on the back of the computer or the chassis there... is there any way to check to make sure the proper voltage is running from the computer or connections with a multimeter? bought one the other day still getting the science of it. thanks bro!
@jeffreystine70682 жыл бұрын
also i noticed once i wiggled the connectors and the car came back on.. still shows the skim light on my dash.. ?
@CraigAndrewBruce2 жыл бұрын
How much was the pcm?
@NajarOffroad2 жыл бұрын
$200ish on eBay
@306-fromthestix2 жыл бұрын
Smog check, fuggin California
@NajarOffroad2 жыл бұрын
😂 it is what it is
@306-fromthestix2 жыл бұрын
@@NajarOffroad where I lived the rules aren't crazy like Cali