Fixing the $6K LS430's WORST Problem

Рет қаралды 242,999

3 жыл бұрын

We fix the tired and worn suspension and brakes on the Lexus LS430.
Proudly Support By Continental Tire: bit.ly/32blCAY #speedacademycontinental
Fortune Auto 500 Coilovers: fortune-auto.com/
StopTech Sport Pads and Rotors: centricparts.com/brands/centr...
Milwaukee Right Angle Impact: www.milwaukeetool.com/
Fluid Film: www.fluid-film.com/
Join Our KZfaq Community: goo.gl/n4m3Ez
Our Patreon page: / speedacademy
BUY Merch Here: speed-academy.myshopify.com
Conquer Helmets: www.roadbikeoutlet.com/?ref=s...
Favorite Tools:
EARNEST WORK APRON - USE 'SPEED15' for 15% OFF: earnestco.com/
Astro LED Work Light: amzn.to/2r70JUu
LED Bay Shop Light: amzn.to/2HHBw9D
Milwaukee Ratchet: goo.gl/2Cvuzm
Milwaukee Impact: goo.gl/kxnJTg
Miwaukee Sawzall: goo.gl/Sbw5FC
Fluid Transfer Pump: amzn.to/2ILVP9u
Uvex Face Shield: amzn.to/2jgZttO
Astro Rivnut Tool: amzn.to/2HAZN51
Rivnuts: amzn.to/2Fse0v8
Canon OES R Camera: amzn.to/2TzJqdo
Rode Microphone: amzn.to/2FsGeGa
Zhiyun Gimball: amzn.to/2WTtFww
DISCLAIMER:
Speed Academy videos are solely for entertainment purposes. Never perform any modifications to your vehicle that will void your warranty or in any way violate your local road going laws. We assume no liability for property damage or injury as a result of any of the information contained in this video. Use the information provided at your own risk.

Пікірлер: 463

@jobeppe 3 жыл бұрын

Guys, when you change the rotors ALWAYS clean the rust from the hub, it should be super smooth. Put some antiseize too. If the hub is rusty the rotor could cause vibrations and weird things can happen

@mihalym.6876 3 жыл бұрын

Could not agree any more. Additionally, in case of vibration problems worth to check the hubs running by a micrometer. Sometimes the hub has some wigle, ask Lexus about the tolerance. But if you have more than .05 - .08mm than definitely worth to check further. Anyway after a couple of thousand miles the truth will be unfold: if the vibration is occure again than it is not coming from the disc and the pads.

@Mark-wp4lw 3 жыл бұрын

That and clean the packing oil off of the rotor. I'm sure you guys did this but a bunch of noobs will watch this video, put on a new rotor straight from the box and contaminate their pads, guaranteed.

@lunarshteve 2 жыл бұрын

i was thinking the exact same thing, as an audi tech i would get a right telling off if i didnt get them as clean as i can, especially considering it would take them like an extra 1 min, it must be an american thing :D

@itshot7501 Жыл бұрын

@@lunarshteve aren't they Canadian?

@angeleruiz9650 4 ай бұрын

O@@mihalym.6876

@BeardedCarBuddy 3 жыл бұрын

I did enjoy the old school SA of showing every technical step, but I think this is a better video style for the masses. Quicker music transitions still show a good amount of details. Well done boys.

@walterharris6191 3 жыл бұрын

Yea idk more for the masses seem less specialized you know? I felt like SA was more like the grad classes of KZfaq but now they kinda feel like gen ed. And I know more people more money but they seem to be blending in more and idk how I feel about it 😕

@BeardedCarBuddy 3 жыл бұрын

@@walterharris6191 Yes, totally can see your point and agree. However, I am betting the cars they build will still be at that master class level.

@lahey5826 3 жыл бұрын

I like that they still explain enough

@rowancall2879 3 жыл бұрын

How to know that Dave is a father and an ontarian. "MarryiO Party"

@josesalvadorguillen 3 жыл бұрын

I lost it when he said Marriyo

@aronlechuga3452 3 жыл бұрын

Looked down here in the comment section as soon as he said it to catch a comment addressing this😂😂

@mr.jarfix6670 3 жыл бұрын

@@aronlechuga3452 haha same

@codymachado 3 жыл бұрын

Lmfao

@RubenHaeck 3 жыл бұрын

Rusty wheel hub/disc mating plate can give enough slinging in the brake disc to make it vibrate. Had the problem on two cars also. Love the build!

@MindUrBiznss 3 жыл бұрын

Yeah, is a very common oversight for the home-gamer. Leads to pulsation and come backs at shops. I hope this was cleaned up off camera but seeing rust through rotor around the studs isn't a good sign.

@jamest5149 3 жыл бұрын

You should clean your hub matting surfaces up so they are spotless, all that corrosion can cause brake wobble and make it hard to get the disc’s off. Use a wire wheel and flap wheel on the hubs, when clean use some Permatex zinc anti seize or ceramic grease between the hub and the disc and between the disc and the wheel. 👍

@smksukcdc 3 жыл бұрын

Biggest problem with this sport sedan battle is that.... one needs to be turned into a sports sedan first! Can't wait to see how it's done though, gonna be an epic journey for sure.

@d1sturb3d119 3 жыл бұрын

Slap spoiler, remove doors! RACE CAR :P In all seriousness though that thing would need a significant diet plus some stiff coilovers to be potent. Car can be quick if done right. Not fast. :P

@NuclearPineapple 3 жыл бұрын

d1sturb3d I wonder how an IS300 spoiler would look in the rear?

@d1sturb3d119 3 жыл бұрын

@@NuclearPineapple I wonder how wide the LS is compared to the IS.

@NuclearPineapple 3 жыл бұрын

d1sturb3d ls430 is 72” and is300 is 68”

@d1sturb3d119 3 жыл бұрын

@@NuclearPineapple Could work

@bloodysinner9456 3 жыл бұрын

The Milwaukee Fuel series of cordless tools are KING at the moment. Put my Snap-on stuff shame.

@davidchoy9560 3 жыл бұрын

It's great you guys are testing the suspension and brakes right after install. Helps to show the progress that's being made with the build. Looking forward to seeing more.

@james18114 3 жыл бұрын

The problems you describe are symptomatic of bad front lower control arm bushings. I had the shake under braking on my LS430 and it was resolved by new bushings. They are oil filled and if cracks form the oil leaks out and give you the symptoms you describe. You can see them from under the car without having to take anything off.

@bandwagon240 3 жыл бұрын

Agreed, my 97 LS had the beginnings of this issue at 173k miles, fixed it right up.

@speedacademy 3 жыл бұрын

We have new bushings for the lower control arms being installed soon!

@williamhavers7460 3 жыл бұрын

Are you going to change the brake fluid? I have had that problem before as it was too old and affecting performance

@Shady97342 3 жыл бұрын

"If you had a track Lexus for whatever reason...." sick burn!

@MkdMuzza 3 жыл бұрын

Loving this build👌I’d recommend inspecting the lower control arm bushings. They are a common wear point on these, and could contribute to vibration under braking loads. Also improves the steering feel slightly.

@vr6myk 3 жыл бұрын

absolutely. I have one of these cars. Had to replace mine when I bought it due to a previous incident where the hub and bushing were replaced on one side. The original side was super sloppy on my 150k mile car. Some people say theirs are fine at that mileage but mine was loose and visibly had significant movement. I put new OEM ones from an IS on mine with the aluminum housing. You could also use RC GS or RCF or ISF bushings. They all fit you just have to remove the dished washer. Figs and RR Racing make upgraded ones for the track. They are generally marketed towards the IS but fit the GS and LS

@MkdMuzza 3 жыл бұрын

@@vr6myk Good info! I've heard the IS ones would fit right in, but I wasn’t 100% sure. Did you notice any improvements/benifits from using the IS bush vs. the LS? I've got an '05 with 175kmiles and I've just replaced 90% of all the front-end suspension components. With the lower control arm bushing, it may visually look okay, but can still be sloppy.

@vr6myk 3 жыл бұрын

@@MkdMuzza other than getting the slop out, no. One benefit is the bushing comes in the aluminum bracket ready to mount for almost half the price of the stock LS bushing that you have to press into the steel bracket. Also you'd have to pay to get the bushings pressed in if you don't have a press. The ISF or RCF bushings are stiffer I believe and should offer some improvement via less deflection of the bushing under braking and steering. The FIGs version is even stiffer and the RR one is another step up in reducing deflection in all directions due to its design. Improvements in steering feel, and feel under braking. Cons would be more NVH. The stock LS bushings are built for comfort.

@FrldyZX87 3 жыл бұрын

What a cool build, something different! Can't wait to see the final result!

@commbubba1990 3 жыл бұрын

That rear center console falling over during the brake test. Lol

@skanetic 3 жыл бұрын

Kinda sad they missed it

@K03sport 3 жыл бұрын

You guys doing all of these projects makes me want to find an LS430/460 and go to town. So much potential.

@krle7970 6 ай бұрын

GS 430

@fuierago 3 жыл бұрын

I love the track videos, keep 'em comin', however this competition/build series are engaging and well produced. Keep up the good work, and stay safe!

@RobertKohut 3 жыл бұрын

You should do a "wheel restoration, worst case scenario" video with these wheels.... :-)

@K03sport 3 жыл бұрын

...I was thinking the same thing. Sand blast and powder coat. A nice gunmetal or dark bronze would be a nice color.

@OwenBuckingham11 3 жыл бұрын

My favorite thing you guys do is explain all the pros and cons of a part before you install it, I especially like when you explain all the aspects of a tire. My question tho is where do I find that information when I'm looking at a part myself?

@drewsplace007 3 жыл бұрын

Very nice work so far guys. I have same year and just did coilovers and figs engineering lower control arm bushings definitely compliments the coilovers highly recommended modification. Can't wait to see what you have in store for this E39 killer!!!

@franciscofiguereo6545 3 жыл бұрын

You guys have inspired me and taught me a lot to make my future cars look nice. And mod them as well.

@TheDIYTuners 3 жыл бұрын

Well my wife wanted me to clean the house but you boys just saved me... Thanks 👌

@Nick210 3 жыл бұрын

Your wife or your mom?

@TheDIYTuners 3 жыл бұрын

@@Nick210 wife... that's why I wrote wife and not mum

@SAMusement 3 жыл бұрын

Loving following along with these build series'

@justinhui384 3 жыл бұрын

I love this series too! its basically semi mod my car series since its a older car that yall pimping out and making it better. and keeping for yourself to daily drive

@umar6962 3 жыл бұрын

in Mighty Car Mods MOOG would definetly taste whatever organic goodies he found :)

@rafapozzan 3 жыл бұрын

Thank God this isn't MCM

@umar6962 3 жыл бұрын

@Mr. K i see your gentleman of culture 😲

@gloomyxyz 3 жыл бұрын

The Canadians are better than that. Minus Justin Trudeau.

@jackb9199 3 жыл бұрын

I can’t wait to see this thing fly down the track! Wish I had a track near me.

@jackb9199 3 жыл бұрын

@@mikea5205 thanks man. I think I might just get one or put it on my Christmas list

@DasCayman 3 жыл бұрын

I have an LS430 UL. Best car I’ve ever owned. But I use mine just for highway commuting and the “floaty soft ride” is highly welcomed!! Enjoy!!

@joshuasingh5438 3 жыл бұрын

Loving the ls430 videos! Makes me want to throw the parts on I’m hoarding on now

@Bob_Sacamano69 3 жыл бұрын

Great video series guys! I'm partial to the M5, but that Lexus is looking nice driving down the road.

@terryharris2805 3 жыл бұрын

This is the most important build you ever did we lexus owners are counting on you 😀 don't let us down. ✌🏾Ultra

@marqueviusroscoe1748 2 жыл бұрын

I swear

@marlingunworks6172 3 жыл бұрын

Love this series!

@devinherndon56 3 жыл бұрын

We appreciate you! Glad you're enjoying the ride!

@charlesfernandez-693 3 жыл бұрын

Just got home from work and it's a great way to mellow out. Shout out from Manila 🇵🇭

@JecNolasco 3 жыл бұрын

Yeah! MANILA!

@helplmchoking 3 жыл бұрын

Damn I'm loving the builds you guys have going on right now, a little different to the standard Supra, Skyline and FD builds floating around and some serious attention to detail

@RyantheGiraffe 3 жыл бұрын

Stoked for the build off series!

@davidteo9146 3 жыл бұрын

Pro Tip for removing the shocks on a double-wishbone cars: As you see, the vertical arm that goes from the hub to the upper ball joint is very close to the strut/spring. Turning the wheel all the way left or right moves the arm away just enough to easily remove the strut/spring.

@East17A 3 жыл бұрын

having smart enthusiast man like you is haven . i wish if i have someone like you around i will bring my vehicle with full confidence. knowing the upgrade will be super well done and safe plus you have visual taste when it come to wheels and tire width 👍🏽👍🏽👍🏽 you made poring car looks hot . something that Japanese car suffer . thankfully its fixable with the right people

@rowanlewisuk 3 жыл бұрын

Been gagging for the next episode of this build, awesome content

@lamboferruccio 3 жыл бұрын

Absolutely love the way it turned out wow

@matthewquinn937 3 жыл бұрын

great series, I hope you're getting the views you deserve

@JecNolasco 3 жыл бұрын

PHILIPPINES!! I'm learning a lot from you guys!!

@evajordan450 3 жыл бұрын

Stoked you guys are producing content again

@deano_s2k 3 жыл бұрын

Great episode!

@jedihair 3 жыл бұрын

The rust on the hub can cause enough runout for the shimmy when you brake. Hope you wire-brushed it off before putting the rotor on.

@kitastan 3 жыл бұрын

I don't think they did......

@supagreatman2826 2 жыл бұрын

@@kitastan damn

@Seikers 3 жыл бұрын

Loving these budget builds!

@RussellKirstein 3 жыл бұрын

so excited for this build

@MohammedAlshehhi21 3 жыл бұрын

I can't wait you guys to start detailing the LS

@feedingfrenzy123 3 жыл бұрын

Keen to see more on the LS430 and M5!

@ifbbprojonathan3711 Жыл бұрын

I recently went with AIRBAGS on my LS430 and instead of using Spring coil over set up, we did use a NEW struts and placed the bellow bags and it rides amazing

@jamalwalker2104 3 жыл бұрын

Thanks for the video. I’m getting ready to have mine replaced too.

@TrackDayMiata 3 жыл бұрын

You guys are awesome , don't ever think otherwise. To get more viewers just keep doing more Jdm nuggets with fun mods , maybe a kei car or two.

@JTheMoneyable 3 жыл бұрын

I’m really looking forward to these two sport sedan builds.

@mnwolves180 3 жыл бұрын

Love the video. You guys should definitely make sure to always clean the rust off of the hubs before putting the new rotors on. Also on the LS430s and 460s . The caliper bracket bolts are all a one time use bolt and should be replaced each brake job. Just an fyi. I work at a Lexus dealership lol.

@conradhernandez7364 3 жыл бұрын

When is the next episode scheduled to be aired? Can't wait to see what is next so I can do the same to my LS. Great job!

@PhillyDee215 3 жыл бұрын

I just fixed the sending unit on my 98' LS400, great cars👍

@MrBenstero 3 жыл бұрын

Brakes are so good that the rear arm rest opens up on braking. Well done so far guys.

@supagreatman2826 2 жыл бұрын

Lol wow

@rockervdrive 3 жыл бұрын

Now that you have a nice ride height on there, some nice wheels will really set it off! Can't wait!

@mapwheel00 3 жыл бұрын

Ratchet vs Impact Driver: You vs. the guy she tells you not to worry about.

@brianrobinson9979 3 жыл бұрын

Next we need to see Moose vs the Impact 😅

@bluezklewz8351 3 жыл бұрын

Impact wrench but yeah

@DS..69 3 жыл бұрын

Wtf are you talking about mehn? Lmao

@5t341tH 3 жыл бұрын

I have a 06 model. Rear toe can be adjusted slightly from the eccentric bolts. Also be sure to replace the front lower ball joints! You don’t want those to fail and the wheel comes off

@antbymcnair4297 3 жыл бұрын

FFS those wheels are triggering me lol

@mikea5205 3 жыл бұрын

haha me too i was hoping they'd change them this episode 😡

@Golo1949 3 жыл бұрын

A well known problem on early model Lexus, so people had new wheels supplied.

@kerrybrucem.8967 3 жыл бұрын

I own a 04 ls430 myself got it 9 years ago must say its a tank on wheels. Endless looks great highway car go gas mileage can't be compared its pure luxury. Best luxury car used i must say. Mine even has the radar cruise control something most cars didn't get til 2011 plus.

@350TPI 3 жыл бұрын

Now i LOVE this body style of LS but i can't help but wonder if the 3rd generation GS350 or 430 would've been better suited to take on the M5. I am loving this series and look forward to see how this progresses.

@andyhuang7526 3 жыл бұрын

Great job!

@breakyoself4423 3 жыл бұрын

Good job. Keep it up the car sits clean and mean

@Xxblaze191x 3 жыл бұрын

If you still have a vibration under braking after doing brakes and shocks check the lower control arm bushings and the lower ball joint. Common issue with these cars but very hard to diagnose. Also for exhaust I would recommend a 3rd cat delete and some straight through mufflers to wake it up

@willisnguyen4715 3 жыл бұрын

transformation is coming along!

@brummiescot 3 жыл бұрын

Chrome sockets on an impact driver? Surely you should use impact sockets to prevent damage to them

@BrandonK80 3 жыл бұрын

Can't wait to see the wheel choice!

@Martin.ac.85 3 жыл бұрын

I like this kind of mod and test videos.

@MrAudi220 3 жыл бұрын

Very nice you could see that the suspension does wonders.Pretty amazed about the stock brake setup on the lexus tbh.And yeah Moog from Mighty Car Mods loves his outdated snacks and alot of other delicious flavours coming out of a dirty cars floor carpet, and they seem to like feet too down there.😅🤣 Great video guys, did about the same thing today with my car, took out my coil overs to fit some harder rubber topmounts on and last week i replaced my heavy steel front controle arms with some aluminum ones(2.5 kg lighter in total so less unspung weight) along with a anti lift kit to add more caster in the front, if any is looking for a decent upgrade over coil overs i would recommend getting a anti lift kit for your fwd or awd car, steering feels amazing now.👍✌️👉

@38tech 3 жыл бұрын

I really want dave to win, just because that lexus is such an underdog.

@danielwotton9428 3 жыл бұрын

You missed your shot. Everyone knows that painting the callipers red adds 50hp.

@Golo1949 3 жыл бұрын

Now you tell me, I have refurbished my GS300 brakes and painted mine blue, matches the car.

@K03sport 3 жыл бұрын

...only if red or a hyper yellow. All other colors add under 20 hp.

@GGdevelopment 3 жыл бұрын

THE M3 LOGO ON THE CALIPERS ADDS STOPPING FORCE!

@bernardosellers369 3 жыл бұрын

Awesome channel

@navinpersaud8962 3 жыл бұрын

Would love to see you guys do a mashup with MCM. Keep up the awesome content!!

@ZeeChannelfamily 3 жыл бұрын

Keep the Lexus LS430 family growing!!! Shout out from Zee Channel 😊😊

@Scrrumy 3 жыл бұрын

Actually impressed with how much good stuff this car came with from factory

@michaelallen2501 3 жыл бұрын

If you can feel the pulsation while braking predominantly in the steering wheel, the front rotors are the culprit. If you can feel the pulsation in the seat, it's out back. If you can feel it in both, well, you know the story. Also, Dave's on point. SLA suspension blows Macpherson outa the water. All about that camber gain setup.

@tsubodzuka 3 жыл бұрын

Can't wait for the wheel reveal!

@loom63 3 жыл бұрын

Wow these stock front brakes are radial mounted!!!

@Dauntless.steadfast.fortitude 3 жыл бұрын

F1 technology

@PaulCuenin 3 жыл бұрын

man, this is great.... need and LS to match my wife's LX now.

@lexusls4305 3 жыл бұрын

Terrific video! What would your buddies recommend for an SC430? Ours needs new shocks and brakes - but you didn’t paint the calipers!

@vr6myk 3 жыл бұрын

Need to look into those Fortune Autos. I wanted to run Tanabes and OE sport suspension shocks but they don't make the Tanabe springs anymore. Would probably lower even less than you guys did but I'd love a sportier feel while driving. Otherwise the LS is one of the best cars I've ever owned.

@mrnicktoyou 3 жыл бұрын

It does feel like I'm watching an ad at times. Lucky the content is still great.

@deciplesteve 3 жыл бұрын

The content has to make money somehow.

@presentlypresentingmyprese7058 3 жыл бұрын

Each episode is one giant add with other adds in them..I wonder if this is why they were scratching their heads to their sub numbers...I get they need sponsors for the vids but this is nearly the worst on KZfaq for it. Great content as usual though. The two guys aren't annoying either which is refreshing

@deciplesteve 3 жыл бұрын

@@presentlypresentingmyprese7058 by that standard, Cleetus McFarland is one big Texas Speed wank fest, Cooper Bogetti is a Motion Race Works wank fest, Donut is a Hyundai wank fest, and Mighty Car Mods is a Ryobi wank fest. They all do what they have to do to afford to bring us this content. Don't like it, don't watch.

@mrnicktoyou 3 жыл бұрын

@@deciplesteve yeah but this episode felt like The Truman Show at times. Especially that torque wrench.

@bandwagon240 3 жыл бұрын

@@mrnicktoyou Parts, rent and cars aren't free. Gotta work some angles so that content keeps rolling in.

@slicktop2jz855 3 жыл бұрын

Wheel cribs saved my life 👍 I use 6x of them. One for each wheel, one under each sil

@sebastiaanpeters7358 3 жыл бұрын

Good change the vibration whilst braking is due to all the rust on the mating surface of the hub. Get a wirebrush and remove all that rust, and put a bit of anti-seize on the hub before you put the rotor on.

@snape1464 3 жыл бұрын

There's options for sporty airride these days (There's a Subaru time attack car running Air Lift stuff). Would've been a nice opportunity to do something different, we've heard your compliments about Fortune Auto often enough

@UnWrecked 3 жыл бұрын

I just fixed up a gs300 I got for $700. That thing was a nice ride

@martinsteele3259 3 жыл бұрын

New Sasha build... Brought to you by Milwaukee!

@CoverageGenius 3 жыл бұрын

Really nice video guys. I have a 2005 MB S430 which has an air suspension that needs to be replaced. Do you think it's worth replacing the whole air suspension system with OEM parts or go the route of just going with regular struts. I found a company called strutmasters that has a replacement system. Have you heard of them? Also, would fortune auto's struts work?

@christschiffely8030 3 жыл бұрын

Are you guys torqueing moving suspension bolts while under load? I noticed on this and the miata sale prep video you've torqued A-arms while in the air. I've always understood that final torque should be performed with full weight on wheels. Another great one guys, keep em coming- enjoyed this one with a cup of coffee and oatmeal on a snowy Colorado morning =) Cheers

@basedemt6608 3 жыл бұрын

Honestly these guys aren't the best. The last video they made me facepalm so hard, and they're always doing sketchy stuff. They are not mechanics. I watch the videos just to see what they do next that'll make me cringe more.

@speedacademy 3 жыл бұрын

Yes, the front A Arms were tightened after raising the suspension, the rear point isn’t a flex joint so no need for it. 80% of the time consuming cumbersome work isnt shown on video

@speedacademy 3 жыл бұрын

What?! You mean we ARE the best, we’ve spent decades training off of KZfaq videos and consider ourselves pros and every video we make includes every torque spec, proper installation techniques in meticulous fashion...that’s what the internet wants to watch right Cory? Or perhaps it’s all for entertainment purposes to make sure you facepalm yourself and keep coming back to watch our cringeworthy content MUAHAHA

@christschiffely8030 3 жыл бұрын

@@speedacademy I figured that may be the case- no sense in showing the world the struggles of crawling under the car while it's on the wheel jenga towers to torque bolts you cant hardly see! Again, enjoying all the content! Thx

@DoktorHalloween 3 жыл бұрын

A request: Please show more of the work!

@jimz6076 3 жыл бұрын

Hello, Do you have any ideas what to look at for a rattle on the front right when going over bumpy surfaces? I replaced the struts.

@antoineleclair3290 3 жыл бұрын

Cosmetic wise i would replace these halogen headlights bulbs with leds and have the window tinted. Can't wait to see new wheels as well.

@grandtheftauto1233 Жыл бұрын

Fresh brakes should always be broken in - you have to evenly distribute the pad material to avoid pulsation. Nice work guys LS430 is awesome

@AKSD1985 2 ай бұрын

I have the 04 ls 430. The brakes are good still. However, when I run over pot holes and small holes in the ground at around 15 mph, I hear rattle coming from the front left/right area of the vehicle. Not sure if it's the brake hardware or suspension components in the front (ie. Front strut bar or strut mount). Also, when I step on the brake lightly, the rattle does not happen. Not sure what is up?

@joebotelho248 3 жыл бұрын

you know it's all connected when SA mention Mighty Car Mods

@joshm.2216 3 жыл бұрын

“Nintendo DS cartridge for a Mary-O Party” 💀

@daneitor97 Жыл бұрын

You know if the shock bag from pneumatic suspension is available? I have LS400 and couldn't find some for my leaking shocks

@w3rdnama1 3 жыл бұрын

Did you keep the default 12k Front/8k Rear spring rates? I'm about to purchase the FA 500 Series coilovers for my LS but am curious as to what you guy's used.