Did the spark plugs on my FZ6 today (removed tank/airbox). With a ton of help from your videos. Thanks again sir! all the work I've done so far on my bike was with your help. Sorry I didnt sub sooner didnt even realize it.
@Calvinm Жыл бұрын
Glad to help!
@OzzyMoto279644 ай бұрын
how many miles were your bikes at when you did this. Im going to be getting in there for a throttle body and debating in doing plugs while I am in ther 9k miles on bike@@Calvinm
@popeye77ish5 ай бұрын
Great job Calvin. I just came across your channel yesterday. I have a Tracer 900GT. Thanks for these great videos. You provide great detail and instruction and I like how you are very methodical and provide lots of tips. Thanks for all the effort you put into making this available to me and making it easier for me to do my maintenance. Much appreciated. Happy riding From ON CA
@Calvinm5 ай бұрын
Thanks for the kind comment. Glad you enjoy my style of getting the information across. Happy riding! 👍
@NOOBAR84 Жыл бұрын
Hi Calvin, I just bought a FZ6-N 2006. I was looking up some things and found your channel. Great stuff, great info and nice bike's. Greetings from the Netherlands. (and of course I subbed ;))
@Calvinm Жыл бұрын
Awesome, thank you! 👍🏍️
@Denis-bc2zp Жыл бұрын
Thank you!!!!
@St3rmTig3r5 ай бұрын
Thanks for posting. Was looking for reference material before I attempt a spark plug change on my 2019 Niken GT. Similar engine, should be similar approach. We’ll see how bad it is to remove the ignition coil packs from the spark plug cylinders.
@mr.notsure9679 Жыл бұрын
You can completely eliminate the AIS and get it out of the way with an ECU flash. I haven't done it yet, but I am going to when I get into it this winter to change the plugs. It's all currently on there but has been disabled I just need to buy the block off plates.
@Calvinm Жыл бұрын
Ya I’ve seen people so that mod. I’ve read it makes it easier to tune the bike because a wideband O2 sensor can accurately read the air fuel ratio when they’re blocked. Hope your install goes smoothly!
@ehonda420814 күн бұрын
You should have just kept the FZ6. IMHO. I think its cool to have a bike for a friend to borrow if he needs. It comes in handy.
@sixton742811 ай бұрын
Good job. Thx.
@dibaridonato Жыл бұрын
Hello, I just bought a 2015 FJ09. I am writing to you from Venezuela. I wanted to know what scanner you recommend me to be able to make the adjustments for the bike. Thank you very much
@raymondcanedos577410 ай бұрын
Bro you sold the fz6??? I would have bought it, but I'm in California 😂 I would love to had yours and just kept mine for parts but anyhow. Love your videos keep up the good work God bless😊
@Calvinm10 ай бұрын
I did sell the FZ6… too bad we aren’t in the same country! Thanks for the kind comment 😁
@byggare104 ай бұрын
Great video. Do you remeber how long time the changing take? From removing all the fairings to reassembly everything.
@Calvinm4 ай бұрын
It would take about 3-4 hours the first time if I wasn't filming.
@shaundisch202011 ай бұрын
I used a pencil magnet to lower the spark plug down.
@Calvinm11 ай бұрын
That would work well!
@mr.notsure9679 Жыл бұрын
5:42 I see a bloody paper towel. How did you cut yourself? so I don't do the same when I change my plugs this winter.
@Calvinm Жыл бұрын
Wow keen eyes you have. I busted my knuckle while pulling out one of the coil packs. Didn’t notice it till it was already cut. I’m sure you’ll be fine.
@philippedesormeaux76947 күн бұрын
Hello Calvin, do you need to empty the tank before disconnecting the fuel hose or is there a check valve that will prevent fuel form flowing? Also, when I did my plugs, the elbow (pipe breather) coming out of the cylinder head cover, was completely loose. In your video it is solidly in place. I didn't see any kind of seal or sealant on the cylinder head cover that would help securing it in place. Is there such a thing ? How is yours secure? Thanking you in advance for any input!
@Calvinm7 күн бұрын
@@philippedesormeaux7694 you do not need to empty the tank. Somehow the fuel does not drain out the fuel line. I’m not sure if there is a seal that holds the breather pipe in place, I can’t recall.
@craigtaylortps9 ай бұрын
Good video cheers
@dean_ferguson2825Ай бұрын
Hey, please can I get your opinion. Got the same bike as yours. When I'm accelerating in 2nd or 3rd gear the bike hesitates/bogs/stutters as if it's low on gas. (It even cut out today when I got to the traffic light. Any opinions please
@CalvinmАй бұрын
Could be spark plugs, a tired fuel pump, or a bad ignition coil. Many things are possible, but try and eliminate one system at a time.
@Szadafaka Жыл бұрын
Thanks for the vid! how much time did it cost You?
@Calvinm Жыл бұрын
If I wasn’t filming this job would take 2-3 hours.
@MikhailSpiridonov3 ай бұрын
Hi, does it make sense to replace spark plugs on 2014 FJ-09 with only 6,000 miles on it? Never replaced, but also no issues. I replacred clutch cable using your videos revently, but for spark plugs it seems to be even more work and more hoses abd wires to disconnect. It scares me.
@Calvinm3 ай бұрын
If it ain’t broke… I wouldn’t bother. Things like the updated clutch cable can help but spark plugs last. There is no reason to replace them until necessary.
@MikhailSpiridonov3 ай бұрын
@@Calvinm thanks!
@raresbirzu243611 ай бұрын
There are 3 spark plugs to be changed on this engine, isn’t it?
@Calvinm11 ай бұрын
Yes
@billslicer3203 Жыл бұрын
I hesitate to just Drop the plug into the hole. I’m afraid it will hit, and close the gap
@Calvinm11 ай бұрын
If you have a quality spark plug socket you can use that to hold onto the plug as you lower it in. With that said I’ve never had the gap close down from lightly dropping it into the hole. Doesn’t hurt to be cautious though 👍
@marcusneiman21687 ай бұрын
I would only buy spark plug socket that come with magnet attach
@TOMYL27 Жыл бұрын
Is there no way to get through the radiator?
@Calvinm Жыл бұрын
You probably could, I haven’t tried though. I followed the process laid out in the Yamaha service manual. It might seem like a lot but you would have to take off the same plastics to get to the radiator.
@vwjapvideos54985 ай бұрын
I’m sure there’s a video of a mt-09 being done through the rad, but he was replacing the water as well
@simonwilson8911 Жыл бұрын
I really wish I knew why my FJ09 was so unhappy at about 3500RPM. There's a mechanical... something... that just gives me the heebie jeebies. It's not smooth at all. Is yours sewing-machine smooth?
@Calvinm11 ай бұрын
That’s odd. I don’t notice any weird vibrations around 3500rpm. Mine feels smooth through that range