Floor Levelling Compound: Essential For Vinyl Plank Flooring Installation! See How It's Done

Рет қаралды 45,268

Күн бұрын

Floor Levelling Compound How to level floors + What You need to know about floor levelling compound to get smoother, flatter floors over concrete or tile. Learn how to use self-levelling compound, how to prime your floor, how to mix two buckets at a time. How to pour self levelling concrete and use a spiked roller to create a smooth, ultra flat finished floor. TIPS to make your floor levelling compound sit smooth and flat. Spiked roller are best for levelling 1/4" - 3/4" of self-levelling concrete. Have a question or comment? Have your say in the comments!
Subscribe for more Tutorials: / darudhillon
Tools:
SPIKED ROLLER (in video): amzn.to/48rknxf
Roller frame: amzn.to/3Ha91lf
Spiked shoes: amzn.to/41P8Zsx
Primer: amzn.to/3vpoPh8
Extension pole: amzn.to/47whqde
Floor levelling compound: amzn.to/3SjNjkS
Timers: amzn.to/3U1Ny5o
Amazon Affiliate Links. As an Amazon Associate, I earn from qualifying purchases. At no cost to you. Thanks for supporting my channel!
Amazon storefront (US): www.amazon.com/shop/darudhillon
Amazon storefront (CAN): www.amazon.ca/shop/darudhillon
Videos You May Like:
Bathroom Exhaust Fan Replacement - • Bathroom Exhaust Fan R...
Best Recessed Lighting - • Recessed Light Install...
Connect on Social:
/ darudhillon
/ darudhillon
/ darudhillon
www.tiktok.com/darudhillon/
Please follow your local building codes, electrical codes and proper safety measures when working on your home or undertaking any DIY project. Use manufacturer's recommendations when installing all home improvement products.
TimeStamps:
00:00 Smoother floors advantage of spiked roller intro
00:18 Prepare floors for levelling + vinyl plank flooring
01:16 Spray foam: why you need it? How to use it?
01:51 Layer of Defence: Reservoir
02:29 Why Primer is Critical + how to apply it on concrete or tile
03:33 How 2 Mix: 2 Bucket Method floor levelling compound
04:04 How to Pour Self-Levelling Compound + Use spiked roller
04:28 Best Tool: Spiked Roller
#FloorLevelling #SelfLevelling #FloorLevellingCompound
About: Levelling floors and filling in grout lines before installing luxury vinyl plank flooring to avoid cracking your vinyl plank flooring. How to level uneven floors: concrete or tile. DIY beginner tutorial. Tips and tricks to levelling floors with self-levelling compound. Why spiked rollers are important. How to use a spiked roller. Do you need a spiked roller for self levelling compound? What primer to use on ceramic tile, how to prime tile or concrete floors. How to mix floor levelling compound, how to pour self levelling compound. Vinyl plank and grout lines can lead to cracking if over 1/4". Be sure to check your installation guide. or use leveller. How to make your floor levelling flat and smooth. How to remove air bubbles is floor levelling compound. What tools you need. Before installing vinyl plank floors over tile you need to level your ceramic floor to fill in grout lines. This is how you do it. DIY tips for beginners. Everything you need to learn how to do it yourself. Home improvement tips and tricks to levelling floors. Subscribe for more with Daru Dhillon.Why using a spiked roller is AMAZING! Absolutely, a must have for me. Learn how to prep a floor for floor levelling over tile or concrete. How to prepare ceramic tile for floor levelling, how to keep compound from spreading too far. TIPS: how to use spray foam insulation for levelling floors, how to install a sill gasket/sill seal to keep compound from making a mess. DIYERS: This is a simple DIY to level your floors. I'm using Ardex V1200 and P4 Primer.

Пікірлер: 88

@bravocompany1072 2 ай бұрын

Love the job you did and the explanation. The easiest and cheapest way to fix a floor that is unlevel.

@DaruDhillon 2 ай бұрын

Thanks! It was quick and easy.

@kkutube1972 Ай бұрын

I love you basic instruction step. I have done this before about 4 years ago and needed a review. Thanks.

@DaruDhillon Ай бұрын

Thanks, I appreciate you letting me know. You’ll do an amazing job!

@CindyOsborne-TDWP 3 ай бұрын

Young lady, you are my new BFF. I'm gonna get this job done today! Thanks and God bless you richly.

@DaruDhillon 3 ай бұрын

You can do it Cindy! Follow the directions to the T and use a timer. You have 10 minutes to spread it out so that it bonds properly.

@CindyOsborne-TDWP Ай бұрын

@DaruDhillon Wish I could attach a photo! I followed your instructions and it turned out perfect.

@DaruDhillon Ай бұрын

@@CindyOsborne-TDWP Awesome Cindy! You rock! So glad you did it.

@budduggly7781 2 ай бұрын

You are a very good teacher! We are having to contend with a very rough kitchen floor, and now we can monitor the process and understand what our contractor is going to do. Great job!!!

@DaruDhillon 2 ай бұрын

Thanks! It’s really good to be informed as a homeowner. Whether you are doing the work or hiring out. Good job!

@vincentnieto7792 4 ай бұрын

Wow great job Daru! You always make a home improvement topic way easier to understand. Makes total sense to cover those pesky grout lines.

@DaruDhillon 4 ай бұрын

Glad you think so Vincent! Covering those pesky grout lines are so much easier than ripping up the tile too.

@charlesstutts4578 2 ай бұрын

Incredibly helpful video, you are awesome at this! Thanks I am going to level a floor some just like this.

@DaruDhillon 2 ай бұрын

You can do it Charles! Awesome to hear from you.

@V85Rex 3 ай бұрын

We use these rollers for cementitious coatings, it didn't even cross my mind to use them for leveling compound. Good video, hoping to dive into my remodel soon will definitely be using it.

@DaruDhillon 3 ай бұрын

It's interesting how rollers are used for different coatings, like you say. I really like it for smoothing out multiple pours for thin coats. Good luck with your project! Good to hear from you.

@AmenMama-qe4sq 2 ай бұрын

Oh my gosh… YOU’RE BACK!!! ❤

@DaruDhillon 2 ай бұрын

Hello! ❤️ it’s great to be back.

@frankcampos1251 4 ай бұрын

Hey it’s great to see you in my infeed again. I was wondering if you had retired to a sunny Caribbean island 🏝️!! Thank you so much for your videos, they are very instructional and I always learn a lot from them!

@DaruDhillon 4 ай бұрын

Hi Frank, it’s good to hear from you! Thanks. The Caribbean would be amazing! Hope you’re doing well where you are. Anywhere close to water is a dream.

@Grizz-one 4 ай бұрын

looks great! well done!

@DaruDhillon 4 ай бұрын

Thanks! Glad you think so.

@noshrinkingviolet007 13 күн бұрын

subbed! Thanks for the demo. I think I'm going to try this myself...

@DaruDhillon 12 күн бұрын

Thanks! Give it a try. Believe in yourself and what you can do.

@barbrathompson9798 26 күн бұрын

Imprresive work 🎉🎉🎉

@DaruDhillon 26 күн бұрын

Thanks a lot 😊

@dginta7932 4 ай бұрын

Another great video. Just did this over tile. Worked so amazing. Daru is the best, bester, bestest ever.

@DaruDhillon 4 ай бұрын

Great to hear that you did this project! Doing this saves thousands in labor and disposal too. Well done!

@garzon53 4 ай бұрын

I would humbly add - that Daru is the most best, morer bester and the mostest bestest on KZfaq😇

@DaruDhillon 4 ай бұрын

@@garzon53 You've got great energy and I'm sending more of energy that back at you. 🙏

@DaruDhillon 4 ай бұрын

Hi everyone, If you're looking for a thin skim coat over your floor a concrete spreader, before the roller is helpful too. I did this solo, but if you have a friend who can mix while you pour, that's even better! Good luck and if you have any questions or comments please share!

@roba2722 Күн бұрын

Can you suggest a spreader?

@DaruDhillon 13 сағат бұрын

@@roba2722 I don’t have a specific brand to recommend for a spreader. Amazon should have some that are well priced compared to stores. Cheers!

@davidalau 4 ай бұрын

Super video Daru! Maybe it’s just me and my lack of experience using the stuff, but it would be useful to see a list of situations where one would need a floor levelling compound and maybe a list where it shouldn’t be used.

@DaruDhillon 4 ай бұрын

Good call! Appreciate the suggestion. It’s a smart idea to to help clarify and streamline the process of choosing the right compound.

@kkutube1972 Ай бұрын

Yes, I use spike roller.

@DaruDhillon Ай бұрын

Good to hear from you! Word is getting out. That’s awesome.

@JBONMETUBE 2 ай бұрын

Hey Daru, Gotta say this was very educational, and I've watched this a number of times to learn. Thanks for that! Questions (1) is the Sill Gasket , Foam Spray + Silicone really necessary, as not many vlogs actually show this? (2) when u add the Foam Spray, then Sill Gasket on top, then Silicone over that ... and THEN lay the concrete, HOW are u still creating an expansion gap ... as the concrete will be over the Silicone and touching the Sill Gasket ?

@DaruDhillon 2 ай бұрын

Hi, you can absolutely skip the gasket. That’s an added layer of insurance in case you make a mistake or miss a spot with your self-leveling compound. The gasket is made of foam and will compress. When in doubt, skip it. Thanks for the questions!

@SpaceDino6928 Ай бұрын

Thank for the great content, and awesome shoes! What are they?

@DaruDhillon Ай бұрын

Thanks! The shoes are awesome because you can walk over the floor without leaving marks. Better than doing the old body stretch with a trowel hand. The spiked shoes are linked in the description box.

@razorcop Ай бұрын

Thank you so much, Daru! That was soooo helpful. Question: I want to use self leveler on my garage remodel and need about a 2 inch high lip or step into the garage to keep the rain out. wondering if I can put a long 2x4 down where I want this threshold, let a couple layers of the mixture set up against the 2x4 and then remove it when it dries to reveal a step? When I remove the 2x4 will it be a wooden/concrete disaster or is there a material I could put between the 2x4 and the mixture so it would be a clean break once it dries?? Forgive the long Q

@DaruDhillon Ай бұрын

Good to hear from you, I appreciate you watching! You can absolutely use a 2x4 as a form to stop the flow of concrete. You are definitely on the right track. Just seal it so it doesn’t ooze out the sides or bottom. Also check the instructions that your self leveling compound is the correct thickness. For thicker areas you may have to patch that first and layer on top. You got this!

@robomaster4882 Ай бұрын

Do you have to do the entire floor at once or can you do part one day. Let it dry and do the other part(s) another day.

@DaruDhillon Ай бұрын

It’s much better to do it all in one day so that it forms a consistent smooth surface. I have pored a large area over a couple days. I gave the joint a sand and it was good to lay a floor over.

@robomaster4882 Ай бұрын

@@DaruDhillon Thank you!

@chrisziemba3889 Ай бұрын

very nice, wish you had showed from the doorway. panning from the door to show how you delt with a door opening.

@DaruDhillon Ай бұрын

I was unable to due to space. I poured the entire area and exited from by the exterior door. I rolled it and was wearing my spikes so it left no trace of me. Watch out for blowing leaves. 🍃 ;)

@talanslate 2 ай бұрын

I always thought you had to remove the tile and self level over the wood subfloor? If I’m planning to do a polished concrete look will this crack if I go over the tile? Thanks this video is awesome.

@DaruDhillon 2 ай бұрын

That’s the beauty of it. New technology and products come out that solve problems. I didn’t think you could do this until I researched and found this product. Removing tile is best but it’s more labor and budget heavy. This worked beautifully. It’s solid concrete and it looks really nice as is. I’d follow the instructions from the manufacturer. There’s a link in the description to the self-leveller. Thanks for the question. It’s a good one!

@talanslate 2 ай бұрын

@@DaruDhillon thanks for taking the time to reply. I’m hoping to do some DIY polishing also. Might be over my head but the tile that is in my bathroom is terrible so can’t be any worse than that 😁. Any tips on hand grinders?

@DaruDhillon 2 ай бұрын

@@talanslate wear a respirator or a good mask. The work will pay off and you’ll learn something along the way. You’re leveling up your skills and that’s great!

@The2009An 4 ай бұрын

What do you do with the sill gasket after the compound dries?

@DaruDhillon 4 ай бұрын

I trim it back with a utility knife at the base. If you feel confident using spray foam you can also just do that alone. Gasket is insurance if you’re unsure or so you don’t miss anything. Thanks for the question! Hope that helps.

@Asmrandlifewithrobinann 3 ай бұрын

Where do u get the pink form edging or whatever it’s called? Trying to find but no luck.

@DaruDhillon 3 ай бұрын

I have a link in the description box to my Amazon store. It has a section on Floor Levelling with everything I used. If you are good with spray foam you can also use that on its own. The pink sill gasket is in case anyone misses a spot so you can rest easy. Both options are good.

@Asmrandlifewithrobinann 3 ай бұрын

@@DaruDhillonthank u so very much!!

@littlegnomeone2121 2 ай бұрын

So im doing research on comcrete methods to use when i remodel my gramdmothers basement. The tile has been destroyed and a tenant tried to rip them out themself. So there is tile glue and broken bits across the entire floor. My question is will this method work if the floor isnt smooth or level underneath?

@DaruDhillon 2 ай бұрын

You would have to follow the manufacturer’s recommendations. Tile needs to be bonded correctly to your substrate and clean. Another step if it’s a gloss tile. Information on the self-leveller I used is in the description box. The floor I did looks great and I’m pleased with the results. It’s a solid, smooth concrete floor.

@vae-lj1qm 2 ай бұрын

Did you remove the pink sill after? Or leave it and cover with the base boards?

@DaruDhillon 2 ай бұрын

I cut it with a utility knife at the base. It peels away really easily.

@cindylactawen7162 2 ай бұрын

Once the floor is cured after self leveling, do I have to put anything on it or can I just keep as is? it's for indoors. Thank you in advance.

@DaruDhillon 2 ай бұрын

I would check with the installation requirements on the package. I installed vinyl over this as is. You can use the floor as is once dry. The concrete looks great I don’t remember if it needs a sealer. The product info is in the description and the company website has the information. Thanks Cindy

@Cali_wow_HC Ай бұрын

I have a very similar tile and want to put vinyl over it...do you think it would be enough to just use the primer and fill the grouts? Maybe sand down the area where it is too high? It's the entire common area over 1100 sqft with lots of corners, walkways, etc. I think the self-leveling compound just seems too much work and messy.

@DaruDhillon Ай бұрын

Self leveling is the easiest route. 1100 sq ft is a large area. Filling and sanding will be far more labor intensive and the results will be less uniform. I’ve watched DIY videos on filling and it’s very uneven from my perspective.

@PHOTOCONVENTION 18 күн бұрын

Maybe I missed it but what do you do with the door of the room. doesn't it just spill out?

@DaruDhillon 18 күн бұрын

You can apply a line of spray foam on the floor to form a dam. Make sure the foam is taller than your pour.

@ableaquariums5480 4 ай бұрын

We have painted plywood floors that are not very level and will need floor leveler at some point before a final flooring option can be put on top. Can this be applied over painted plywood?

@DaruDhillon 4 ай бұрын

Yes they can. You have to make sure the self-levelling compound you choose is designed for use over plywood and the primer too. The one in this video is not for plywood but I’d do the same steps. Remember to use a lot of spray foam around your toilet flange and doorway.

@ableaquariums5480 4 ай бұрын

@@DaruDhillon and is it ok that the plywood has paint on it?

@DaruDhillon 4 ай бұрын

@@ableaquariums5480 if your paint is in good shape not a problem. I sand over any loose paint.

@ableaquariums5480 4 ай бұрын

@@DaruDhillon Thank you.

@jameswalter3136 2 ай бұрын

Good instructions, but why are you covering a good CT floor with vinyl???

@DaruDhillon 2 ай бұрын

Lots of people wouldn’t but sometimes you want a change. Good question James!

@709andre 3 ай бұрын

I thought for vinyl plank you could use some OSB boards to level the floor instead of pouring levelling compound over the tiles.

@johnnyjiujitsu2008 3 ай бұрын

That would just raise the floor, new underlayment wouldn’t make it flat.

@DaruDhillon 3 ай бұрын

You could do other methods. This was quick and easy. I also wanted to test this method out and the product. A+

@michaelhudson452 26 күн бұрын

Do you leave ur foam ?

@DaruDhillon 26 күн бұрын

Yes. I trim back the pink stuff after it's pored. That's it!

@torontorox 4 ай бұрын

i ripped up old linoleum and there's a sticky uneven mess under it. do i have to scrape or sand it down or can i put other sticky tiles over it as is. i don't want to level....

@DaruDhillon 4 ай бұрын

I would scrape, clean or sand down the mess. Adhesives will stick best to clean surfaces even. If your floor has a gentle slope it should be ok.

@torontorox 4 ай бұрын

@@DaruDhillon drag. i was afraid of that

@DaruDhillon 4 ай бұрын

@@torontorox your intuition was right.

@Eyehearttravels Ай бұрын

She’s a strong women’s I know is a lot of guys can’t even carry a 50lbs bag

@DaruDhillon Ай бұрын

Thanks!

@_JimmyBeGood Ай бұрын

Do you need a husband?

@nuttjobsucks245 2 ай бұрын

What is the pink stuff that goes around the perimeter of the room and where do I get it?

@DaruDhillon 2 ай бұрын

It’s a sill gasket. There’s a link in the description. You don’t have to use it. You can just use spray foam. It’s added defence in case you miss a spot.