Foam tire recycling Westside Tire using Corghi tire changer
Пікірлер: 183
@glenellis73279 жыл бұрын
I worked hard, I mean really HARD, for hours and you outwork me in 8 minutes. My hat is off to you, Sir.
@get-the-lead-out.45936 жыл бұрын
Heck yeah! That guy's job is a cake walk compared to how we gotta break down our farm tractor tires... pry bars, cheater pipes on the pry bars, sledge hammers and blocks of wood to beat around the bead of the tire, and even setting the tire down on the ground and driving my 4x4 truck up a 2x6 board that's laid on the bead of the tire and then often having to sledge around the bead!!! I just can't imagine what even the cheapest model tire machine would cost that can do these large tires :-O
@stevenbryant19545 жыл бұрын
I did the same thing on my Corgi with a sawzall. OMG I won't do that again! I like your cutting attachments. That's what I'll make next. Nice Job!! Those negative comments? You have not done this job before! Better to been seen and not heard!
@mikaelabowen57816 жыл бұрын
What a great machine, this is really interesting. Quite therapeutic to watch, too. With the tyre removed the foam filling just looked exactly like a 1950 Dinky Toy tyre!
@redskiclayton4 жыл бұрын
Nice job there Ricky Nuggets, you with your knife, pistol, chain wallet, shiny blue jeans, biker mustache.
@aaronholmes85687 жыл бұрын
Did you guys make the blades for this yourself? Great work by the way.
@harrisonp37275 жыл бұрын
Very labor intensive process.
@johndoyle47237 жыл бұрын
Like the Pizza cutter wheel at the end. Some find these videos boring, me, I find them fascinating the ingenuity that is used to design the machine is amazing. Actually no recycling at all just tyre removal.
@santoshpagad92804 жыл бұрын
Q
@PeterAlexanderWelch6 жыл бұрын
Hell of a lot quicker than the way I used to do it. Using a knife to cut the tyre and then hack away at the foam filling, to rescue the rim. Used to take me about 30 mins for a 12.5-16.5 solid filled bobcat tyre.
@Pushyhog6 жыл бұрын
Bet the famers and etc love this machine, saves a fortune, and reuse the foam. I can see the machine is used and used and used and used. Tires are 350 to 500$ sometimes not including the foam and set time. But the tractors and such make big money per hour. Thanks.
@trenzmeister7 жыл бұрын
hell of a machine
@rickey53536 жыл бұрын
Voted- The Most UN-imaginative Machine Of All Time !!!!!
@powly79467 жыл бұрын
What a long Process for one tyre
@javiermaldonado1899 жыл бұрын
What you make at the old poly fill?
@TheShop.7 жыл бұрын
Very cool.
@RobertCiampa91126 жыл бұрын
What does Jerry Bentwell have to say about this operation?
@cloverdale877 жыл бұрын
I have worked in the foam filled tire industry for over 15 years. We had to do this all with a forklift press plattern. Sawsalls The "Foam is 100% recyclable also" Cut it in chunks and put in another tire that will be foam filled. This kind of work destroyed my body. I wish to all mighty that we had a machine like this. My back has no discs left in it. The foam fill industry was made up after the MFG of these tubeless rims. A 2 piece rim is a tube type tire A 3 piece rim Has a O ring and locking flange 1 piece rims are tubeless and [need no tube] Tube repairs are far more costly then "plugging" the hole in a reg air tire.
@casadelshed91284 жыл бұрын
cloverdale87. Hello what industries or places used the foam filled tyres. What was their advantage over air filled tyre.
@jafferhussainmohammed89476 жыл бұрын
where did this machine get
@larryalongi31735 жыл бұрын
It last longer then being aired up you can run over rebar and it won't go flat.
@screwsnutsandbolts4 жыл бұрын
Impressive 👍🏻
@EwDirt9 жыл бұрын
I can't believe I just spent 8 minutes of my life watching a tire spin.
@josephsimmons276 жыл бұрын
Ew Dirt right
@DmiA6 жыл бұрын
we need tire spin ten hours version
@MrGichinfunakoshi6 жыл бұрын
Plus 30 seconds to write your comment
@CENTAURE13124 жыл бұрын
Vu le temps qu'il faut pour un pneu et vu le nombre de pneus qui se réforment, y a intérêt à fabriquer des machines de démontage.
@user-zp4yt1ph2j5 жыл бұрын
а для чего такая процедура
@JimNichols6 жыл бұрын
Why not cold cap the tires ...
@digranni1286 жыл бұрын
É por isso q as coisas são caras😐
@JavierRodriguez-or6mn4 жыл бұрын
Ya iventen una llanta, inponchable para,autos y motocicletas.
@dm556 жыл бұрын
I have to start reading ng the comments before watching the video.
@ablepuentes40774 жыл бұрын
You don't have to sweat going to work now,
@munirmir41684 жыл бұрын
I don't know what they are doing. What is the end result.
@user-rh9yf2eg6f4 жыл бұрын
Непонятен смысл этих движух, Покрышку порезать?
@franciscorodrigues54463 жыл бұрын
Sucesso. Ai no canal
@aamirshahaamir16673 жыл бұрын
Apna number sand karo
@micromachine79548 жыл бұрын
I wonder why they don't use 2 piece wheels (bolted together in the center) on these? Removing the beads around the 7:00 minute mark reminded me of peter griffin driving the forklift hahaha.
@PerthBoyz7 жыл бұрын
Ron Garvin you mean a "split-rim"
@BMCUSN807 жыл бұрын
Not a split rim, a two piece wheel bolts the left side to the right side, a split rim just has a split ring that keeps the bead on, two different types of rims, split rims are also extremely dangerous to mount, lots of guys have been killed by them over the years, that's why they are no longer used.
@user-ij6sz5mz9k6 жыл бұрын
Micro Machine تصليح تركته في
@krishnaponnusamy23996 жыл бұрын
Micro Machine
@jimmywillis50284 жыл бұрын
A 2 piece rim will not work that tire with foam weighs over 1000 pounds and the application of tire is for heavy duty equipment. A 2 piece rim will flex to much causing bolts and nuts to come loss . A safety ring rim or 3 piece is extremely dangerous
@CHIBA280CRV6 жыл бұрын
Fantastic thanks
@srenjustsen67495 жыл бұрын
Det var nok den mest langtrukne måde at få et dæk af.
@viktor9766 жыл бұрын
Most of the commenter don't even realise, that this wheel is filled with solid rubber and can weight more than 400kg. They have already seen a bicycle tyre, so they know better everything.
@charleslove23195 жыл бұрын
Viktor Szigeti I thought the video said it was filled with foam not rubber
@amirltehrani14924 жыл бұрын
آموزنده
@greenspiraldragon6 жыл бұрын
Sure beats a pry bar and a sledge hammer.
@gulabk654 жыл бұрын
Very good
@omar159116 жыл бұрын
I feel it would be cheaper and easier to just retread the tires
@juriy36006 жыл бұрын
why not just disassemble the tire?
@charleslove23195 жыл бұрын
I can’t imagine how much it cost them to fill that enter tub with foam.
@bond007agent25 жыл бұрын
А непроще сразу снять покрышку целиком. Зачем такие сложности?
@user-ce6cv5cn3h5 жыл бұрын
Вот это дебилизм!
@adamwilliams51188 жыл бұрын
awesome! that would of taken ages by hand.. imagen trying to get that off with a crowbar and flathead screwdrivers!
@yoanharvey61046 жыл бұрын
Guix6gl,.,hkigkivtu k c,.😹😖
@TerranMarineCore6 жыл бұрын
Believe it or not it's faster doing it by hand. You need a sawzaw, tire bar, and a forklift
@user-jv1mb5tp8q4 жыл бұрын
хорошо что мне так не меняют резину на машине.
@RRRIBEYE6 жыл бұрын
Seems awfully involved - and I bet wasn't cheap. When I needed new tires for my Bobcat 7753, I just used a sawzall and cut off my bald, solid rubber filled tires and they made some heapin' smoke signals on our bonfire that night! Rims cleaned up like new - then refilled again for their 2nd life!
@baskerwille93358 жыл бұрын
What a slow process...
@kashifshahzad3594 жыл бұрын
Nice boy
@bedouintrader6 жыл бұрын
and ?
@deanmurray49538 жыл бұрын
where do you get them filled and how much does cost howard county arkansas
@javiermaldonado1898 жыл бұрын
advantagetires in chino California
@frankstocker54756 жыл бұрын
I was tired after watching this.
@SLTravel118 жыл бұрын
why am i watching this.
@get-the-lead-out.45936 жыл бұрын
because you chose to click on and watch it ;o)
@user-mc3px7hm4i4 жыл бұрын
Wtja.gjp
@topmastermind4 жыл бұрын
nano ini?
@aqsinabdullayev92924 жыл бұрын
Super 🇦🇿🇹🇷🇦🇿
@lah34214 жыл бұрын
casi amanece y aun no sacan la llanta...muy lento
@BulletmanDoom6 жыл бұрын
Tell me I didn't hear you whistle at a work colleague? I see no dogs.
@balazspetho5070AgroGO7 жыл бұрын
Cut, cut, cut, after 5.5 minutes take away the tube (0.3 kg) by forklift. In a busy day this way make a nice quarter money :D
@limsiewlai66574 жыл бұрын
U
@cristic7679 жыл бұрын
I like machinery but I don't know what is the purpose of this job. Could you explain to me in couple of words? What people do with the result of this job? Tx!
@bbyeahwhatever8 жыл бұрын
The tire is foam filled instead of air filled so it doesn't have flats. Once the tire is worn out the only way to get it off is to cut it off.
@micromachine79548 жыл бұрын
+Cristi C They put the foam into a new tire and mount it on the wheel...
@get-the-lead-out.45936 жыл бұрын
The video shows the initial process of recycling a tire whereby removing the tread and the inner foam filler which will later be used to make other things, and now a new tire can be reinstalled onto the rim. Tire treads are often turned into small chips and then used to make things like "welcome" mats that you would lay outside of your door, but unlike what another commenter said, I personally have never heard of the foam filler being reused whereby putting them back into another tire.... although they may actually do this now, what I have experienced is after a new tire is put onto the rim, it is refilled through the valve stem with new foam. I only know this because I own a couple Cub Cadet garden tractors and a Ford 9n, 8n, and a 3600 and 2 of them have foam filler because I was frustrated with getting flats... my grandpa who owned this property before me had a very questionable knack for tossing broken bottles and used nails in the back yard :o/
@larryalongi31735 жыл бұрын
Well , it's like this,they are removing the old tire and the rubber that's inside because the tire is no good anymore so what They do is clean the rim add a new valve stem mount a new tire and foam fill it .
@Ch.Parvezz6 жыл бұрын
Nice but too slow
@get-the-lead-out.45936 жыл бұрын
then change the settings to watch it in a faster speed. I just checked and youtube still has that option...just click the gear icon that's located directly under the video screen in the right hand corner. Different browsers may have it located somewhere else close to the video screen
@kolyanhiace24505 жыл бұрын
Это, похоже, не пневматическая шина. Вместо воздуха какой то компаунд
@user-ii5xi4hs8h5 жыл бұрын
На диске штуцер-ниппель присутствует.
@user-ii5xi4hs8h5 жыл бұрын
Хрень какая то
@paxan_dlslel17995 жыл бұрын
Я бы болгаркой разрезал быстрей в 2 раза и не поперек а в Доль
@user-mv9mz7td7o4 жыл бұрын
Сколько дисков знаешь, ушлобы пока ты поперёк только резал?
@LottsaLasagna14 жыл бұрын
So what Now.you put on a new tire with the foam back in.
@AliAli-jc3uw4 жыл бұрын
اكل خرة
@luispichamba67994 жыл бұрын
Es vien
@jjmcq23276 жыл бұрын
I have to recycle some foam filled tires.
@tirewiz6 жыл бұрын
Please contact me at 763-420-2100 I will help you with that. Shawn J Leuer Westside Tire
@sethrollin84506 жыл бұрын
i need that machine
@nextlevelhd98694 жыл бұрын
tired
@marshalllhiepler4 жыл бұрын
Towards the end ... I started getting "tired".
@angaraniadia65794 жыл бұрын
Machines
@kolyanhiace24505 жыл бұрын
this is not an inflatable tire
@belhouaritubehd88514 жыл бұрын
ακόμα κι αν σας κατάλαβα καλά
@allenmaccarthy71084 жыл бұрын
What is the point of this video?
@user-ts5cu8lp5o5 жыл бұрын
На фиг Я это смотрел 😂
@kenankerimov71244 жыл бұрын
Да не говори 😁😁😁я тоже так думаю какого хрена я посмотрел
@user-sn5ij6sf7s4 жыл бұрын
Тоже зачем
@lytken8 жыл бұрын
that is the biggest waste of time and a lot of energy ever
@ChaotiX18 жыл бұрын
It takes 40% more energy to make a new tire. Might as well recycle it. Moron.
@dougiequick17 жыл бұрын
The 40% got a whole lot ATE UP running the machine and , making the machine, maintaining the machine...But if one insisted, I would think a big ol ban saw could cut the whole friggin affair in HALF in about 30 seconds...done and DONE
@ChaotiX17 жыл бұрын
Doug Chaney Oh I forgot, new tires dont require machines to be made. Fucking idiot.
@MikeBaxterABC7 жыл бұрын
Used rubber from destroyed tires cannot be used to make new tires ... the rubber can only be vulcanized once.
@jjmcq23276 жыл бұрын
I use a Saws-all
@999locke5 жыл бұрын
cheaper to take the trire to the dump
@ScottSmith19935 жыл бұрын
Whatsapp me:+86 15107149073
@funwithyou143 жыл бұрын
Waha youTube 12 years lod video suggest me
@alyxlyon13 жыл бұрын
I ididn't ge tthe idea of this video. So you recycle the rubber and what of the steel wire core? Why cut the tire in the first place and spend 8 minutes doing so when you can just take of the tire and replace it with the same amount or even less time spend. So taking of the layers -> for recycle? Only reason i would do that. Tho we don't even need to do it here since theres far more effective ways to do that.
@BMCUSN807 жыл бұрын
Because you reuse the old rim, a new skid steer rim is over a hundred bucks, and that one was twice the size, throw a new tire on it and refill with rubber. saving probably over 200 bucks.
@Shinichi8936 жыл бұрын
How is this profitable ???
@ScottSmith19935 жыл бұрын
Sir,Know more information in whatsapp:+86 15107149073
@zafarbux62836 жыл бұрын
Postmatom
@savvaspouloukou99696 жыл бұрын
zafar bux .
@clintkysar14465 жыл бұрын
Save money and time, shave and retread the tire no new foam to buy no expensive corgi machine just bring it to a retread outfit
@dougiequick17 жыл бұрын
Yeah why not pass a law that that they HAVE manufacture these rims as TWO PIECE...what a big DUHHHH! no?
@PerthBoyz7 жыл бұрын
Doug Chaney it's called a "split-rim"
@2Truth4Liberty7 жыл бұрын
And the locking ring of the split rims took so many a tire changers life, that they dumped that idea.
@PerthBoyz7 жыл бұрын
2Truth4Liberty yep it would take ya head clean off if wasn't done right
@2Truth4Liberty7 жыл бұрын
I still have split rims on an old(1960) grain truck but most shops won't touch them today. I certainly do not blame them because even with a tire cage there's no guarantee ;-0)
@realanimal36027 жыл бұрын
Yea on a pneumatic split rim the air pressure holds the lock in place so long as it seats properly in the rim. There are bead lock rims that use a bolt-on lock ring that is much safer and I bet would great for these tires.
@azharqadri64623 жыл бұрын
Ser this machine give me
@ghosthunter6795 жыл бұрын
Strange video....turned a 2 min job into a 8 minute job
@user-jg4ru9px8n2 жыл бұрын
До чего обленился народ
@user-cn2jo1lu3s3 жыл бұрын
Very pad
@evgeniypeliasov4133 жыл бұрын
И нахуя такие сложности, мне бы понадобилось уголок, кувалда и две мантировки
@user-ix8mi6kj1g3 жыл бұрын
Это апарат для страдателей хуйней
@averygentry357 жыл бұрын
what was point of this video?
@Orbit123456777 жыл бұрын
In the title dummy
@averygentry357 жыл бұрын
Orbit , the title is why i ask ........point?
@aaronholmes85687 жыл бұрын
avery gentry they're demounting a foam filled tyre so the rim can be reused
@get-the-lead-out.45936 жыл бұрын
avery, you asked "what was the point of this video?" orbit replied with an obvious answer of how it's "in the title dummy" you replied to him "Orbit, the title is why I ask........point?" ...and so if you still don't get what the point of the video is even after reading the title which CLEARLY says "Foam tire recycling with Corghi tire machine" and then the video showing what the title says, then you must be one of the more clueless people.... the video CLEARLY shows the initial process of recycling a tire whereby removing the tread and the inner foam filler which will later be used to make other things, and now a new tire can be reinstalled onto the rim.
@willem8784 жыл бұрын
It's a "to stupid to watch" video
@user-jl2bq5kr6t3 жыл бұрын
И в чем блять суть этого видеооооо????
@larrysorenson47893 жыл бұрын
Lots of work for scrap rubber. I suspect that this process does not make viable economic sense.
@bogey190186 жыл бұрын
gotta be something faster
@arifsetiawan90914 жыл бұрын
C
@rogerhurd64346 жыл бұрын
holy hell what a time consuming process.
@Sintatnun6 жыл бұрын
I'm faster when I'm doing it the right way
@onwardstanley19984 жыл бұрын
Why would you put garbage on you tube
@user-rt3lx6sk1d4 жыл бұрын
ى ر ل
@alhadathmobile75824 жыл бұрын
😂😂😂😂😂😂😂
@JodBronson7 жыл бұрын
WTF? Just send a Person over to grab the Foam Tube. WTF? This is some serious shit!!!! LMFAO - Man, this is STUPID and I agreed with most People here !!!!
@ptvetter7 жыл бұрын
That "foam tube" weights about 600 lbs. Not going to just grab that and walk away with it.
@michaeljulian49976 жыл бұрын
I think I could have done that with a pair of fingernail clippers in that amount of time....
@ScottSmith19935 жыл бұрын
Sir,Know more information in whatsapp:+86 15107149073
@trevoraldrinmatanjun8624 Жыл бұрын
So slow , who build this michine so slow for one tyre.
@Rene-up1dl Жыл бұрын
Bought a heavy duty wheel lately? $$$!
@TTomky4 жыл бұрын
What a joke. Process does not work
@arifshah81965 жыл бұрын
Tyre ki cutting kahan sele Karen Plz send party contact no.
@ScottSmith19935 жыл бұрын
Sir,Know more information in whatsapp:+86 15107149073