Ford 223 6 Cylinder

Рет қаралды 52,748

14 жыл бұрын

Restoration of my 1955 Ford F-100. The first part of that project is complete. Engine was totally rebuilt and Clifford Performance Header and Intake were added. Engine hasn't run in 27 years.

Пікірлер: 43

@user-hb8be5wb4q 2 жыл бұрын

Mr. Hassle Rumley had one of these in his 1953 Ford. We went to the same church when I was a wee lad that read car magazines and dreamed. Imagine my eyes getting big when he opened the hood of his car. We had no idea he was a hot rodder at heart. Mr. Rumley, R.I.P., got a big jolt up our respect of car guys after that view. His son has a 1956 Tbird, premium!!!! Blue blood runs deep!

@BonerMaroner 6 жыл бұрын

I had a 1957 ford with a 223 6 cylinder a manual 3 speed with over drive a 4:11 rear. I could smoke them in 1st and 2nd get a chirp in 3rd. Great motor if they are rebuilt correctly. Love your dual exhaust

@asslowshop396 2 жыл бұрын

I run out of gears pretty quickly with my 3 speed. I must have close gear ratios, I love hearing stories like yours. Reminds me of my grandpa.

@unhingedplays2203 Жыл бұрын

Have the engine and transmission in my truck I sure about the diff though.

@tjtharp2432 2 ай бұрын

Sounds really good!

@rgs4x 10 жыл бұрын

I had the same set up and I found with the weber I couldn't get the thing to idle correctly. I ended up switching it out to a autolite 2 barrel off a mustang 289 and it worked perfectly. This combo really warms a 223 engine up.

@myoltruck 13 жыл бұрын

Nathan, I got the intake, header and carb from Clifford Performance. Bolted up real nice and sounds good. Haven't finished the truck yet but hope to have it done in the spring. If you do a google search for Clifford Performance it will come right up. Jim

@SHERIFFWoody 12 жыл бұрын

sweet video's like this keep me going on my 64 -I6-223 :) keep up great work would love to see more of the truck

@timdavis665 10 жыл бұрын

might run better with the two brass bibs capped off !

@fatotis6273 6 жыл бұрын

Those are just for water to heat manifold.

@hoss73ford 11 жыл бұрын

I decided I'm going to put a 223 in my '59 F100. I didn't know until a few days ago that headers were available for this engine. A six sounds neat with glass packs. Until now the only ones I've seen are Chevy 235s with such a set up.

@slick4x4 12 жыл бұрын

that is a later than 1955 engine (or head)...... the valve cover on a 55 has the bolts in the center at the top of the cover holding it down sweet engine ! most everybody chucks those motors & installs a v-8 glad to see one getting a new life

@deanpowers9352 9 жыл бұрын

I Had a Ford 223 That Was Bullet Proof............

@jamesmorgan818 2 жыл бұрын

Awesome

@fackyoutoobe2 13 жыл бұрын

You had it running really smooth at one point how much did the engine rebuild cost and did you do it your self

@padrex5718 7 ай бұрын

Know anywhere I can find the water pump that has just the pulley on it for a 223?

@lovethegame777 10 жыл бұрын

Hi, I'm rebuilding a 1956 Ford Customline with the 223. Will the header and intake work on a 1956 223 for a car and truck, or only a truck?

@charliehamilton8010 7 жыл бұрын

Are you still running a "Loadomatic" distributor? I have a 52 with a 215, and wanting to go with the setup but have heard a lot of bad things about the setup with a "Loadomatic".

@randyrhodes8469 3 жыл бұрын

Hello, I realize this is an older video, but what are your comments on how the added Clifford parts improved performance? Were you happy with it compared to stock?

@randyrhodes8469 2 жыл бұрын

@2muchtv is bad Thank you for the comments on your 223. I plan on doing the same to my 63 223. So many people pull out the six for a V8. Not me! I looked into the double carb setup, but for a cruiser I think the single carb is good enough. I will remember your advice on the headers. I am sticking with the standard three on the tree. What rear end gear ratio are you using for this setup? Thanks.

@heavymetalworks6375 2 жыл бұрын

what carb are you using?

@jeremysimpson1432 5 жыл бұрын

I have. 63 ford 223. How much power was an engine like this rebuilt able to produce? I am kicking around the idea of rebuild the 223 I have in mine and changing the gearing so I can get highway speeds out of it. Or just swapping in a V8 (obviously with some front end fabrications)

@midnightraiin4035 4 жыл бұрын

Jeremy Simpson what is a stock 223 capable of on highway without racing the engine. i live in ny and some highways call for 65mph

@mongrott 4 жыл бұрын

Probably around 150 - 175hp. A 292/312 v8 is a direct bolt in though.

@EVILDR235 3 жыл бұрын

If you like 215 and 223 Ford sixes, you should check out a Ford 262 a member of the same engine family.

@RodBeauvex 3 жыл бұрын

Rare to see on YT though.

@connydomig-strohle6926 8 жыл бұрын

Hello from where you can get such a manifold ( EXHAUSING system ) ??

@ballesteros67 3 ай бұрын

The brand is called clifford

@totalupgradeautomotive7276 4 жыл бұрын

hey Jim just wondering how the progress is coming on the truck?

@myoltruck 4 жыл бұрын

TU Auto Care Haven’t finished it yet. It’s all about money and a place to work on it.. I’ll get it done someday..

@chasealphin8958 4 жыл бұрын

Is there a specific kit you used to rebuild this?

@ballesteros67 3 ай бұрын

The brand is called Clifford

@ChuckHeil 11 жыл бұрын

I bet it was loud.

@N8-T 13 жыл бұрын

Where did you get the intake and headers?

@ballesteros67 3 ай бұрын

The brand is called clifford

@DeanMk1 3 жыл бұрын

What carburetor were you running on this engine?

@myoltruck 3 жыл бұрын

Webber cards, don’t ask me to the part number but I bought them from Clifford performance with the headers and intake.. Still don’t have it finished. Maybe some day when I have the money. Thanks for the interest..

@DeanMk1 3 жыл бұрын

@@myoltruck I thought it looked familiar. Nice running engine anyway. Sounds great. If nothing else, you did a nice job on the motor. Good luck. -b