Ford 9 Inch - Disc Brake Conversion - RuffStuff Specialties
Рет қаралды 162,214
Күн бұрынProject Green Machine continues
Ford 9 Inch - RuffStuff Specialties complete weld on disc brake conversion!
RuffStuff Specialties
www.ruffstuffspecialties.com/c...
And a big thank you to Rock & Road Performance in Loomis, CA. For the shop space!
rockandroadperformance.com
If a BleepinJeep video has ever helped you consider returning the favor by:
• Supporting us on Patreon here: / bleepinjeep
•Buying a T-Shirt Here: www.bleepinjeep.com
•Or Just leaving a kind comment on FB here: / bleepinjeep
This product is meant for entertainment purposes only. Your mileage may vary. Do not try this at home. Void where prohibited. Some assembly required. For off-road use only. Slippery when wet. Batteries not included. Do not use while operating a motor vehicle, heavy equipment, cherokee XJ, wrangler TJ, wrangler JK, or any Jeep vehicle, especially the newer Fiat ones. How-to videos may be too intense for some viewers and children under 30 years of age. Please remain seated until the 4x4 ride has come to a complete stop. Studies have shown viewing these videos causes increased cancer risks in laboratory test people. I am not a professional, I have no training, I'm not even particularly good at horse whispering. Don't believe everything that you know. Please keep your hands in the vehicle at all times. Do not tap on glass. Do not eat anything that has been on the floor for more than 3 days. Keep your hands to yourself. Not to be taken internally. Reproduction strictly prohibited. Driver does not carry cash. Objects in Bleepinjeep mirrors may be farther than they appear.
09521
@thomasboak5996 5 жыл бұрын
Probably the "VERY BEST" made Video's ever! This young man is a true "PRO"
@Ken19700 7 жыл бұрын
That axle is a work of art.
@bleepinjeep 7 жыл бұрын
Thanks man! I'm excited to have it done and under the Jeep! - Tim
@rc3140 7 жыл бұрын
Nice job,I went through the same thing with my late model circle track car.
@DestDroid 7 жыл бұрын
That looks like a sweet shop.
@josephtucci3666 7 жыл бұрын
Nice vid my friend Man you guys do like HEAVY stuff! Best of luck.
@TheDanguruss 7 жыл бұрын
Dude your total bad ass on the welds. Thanks for the video.
@bleepinjeep 7 жыл бұрын
Thanks! Thousands of hours laying beads eventually pays off. Lol. Tim
@gilliland426 7 жыл бұрын
great job Tim!
@JUMBOs-RC 7 жыл бұрын
Nice video... I wanna do this on my '78 F-150
@ameyers67 5 жыл бұрын
I'm super jealous of your welding skills.
@meanemt 7 жыл бұрын
adapt and overcome, nice work
@neilhansen5663 3 жыл бұрын
Nice job young man
@azizebrahim6377 Жыл бұрын
Nice job very perfect..skil full👍
@Freebird67 6 жыл бұрын
Nice video thanks for posting
@t54760 7 жыл бұрын
Another vote for those welds. Beautiful. I know BleepinJeep isn't probably the right venue (or is it) but I wish you would do some welding / fab videos. Those of us that would like to up our game would love to see how you do it. I really enjoy Matt's fab ingenuity too.
@bleepinjeep 7 жыл бұрын
We have some fab vids and some basic welding how-to videos. Is there something specific you'd like to see? Give me a few examples and I'll give it some thought! I appreciate the input and the compliments. Thank you! - Tim
@bleepinjeep 7 жыл бұрын
He's a master in his craft. - Tim
@MrMrsregor 7 жыл бұрын
i would love to see a good video on cheap diy weld on beadlocks for steel wheels !! you have a nice mix of jeep knowledge and great looking welds, so i would love to watch really anything tim is willing to video as he custom makes it or welds onto a jeep. keep up the awesome work and great videos!
@t54760 7 жыл бұрын
I think I've caught all of the videos from BleepinJeep. Also I've been a subscriber to Welding Tips and Tricks for years. My cc no stranger to the Weldmonger store. Love the double tig finger. Tim as far as welding suggestions go. A great tutorial for me would be to duplicate how you did any of the welds on the truss to 9" axle. Those were just one example of the works of art you call welding. Thanks again for all of the videos.
@MrMrsregor 7 жыл бұрын
thank you for posting the "make your own rock rings or beadlocks" video ! i am guessing that i just got lucky.?. but i feel special, like you made the video for me. THANK YOU TIM !
@mtutone 7 жыл бұрын
Way cool video. Thanks
@squidusn71 3 жыл бұрын
Old video, but the way you guys grinded that axle flange and set the caliper in place by actuation of air is freaking pure genius. Well done sir!
@RobotJustice 7 жыл бұрын
I'm enjoying these vids! That "kit" though. There's only one unique part, the mount, and if you've got the equipment to make it work then you've also fit the equipment to make it yourself out of steel plate.
@bleepinjeep 7 жыл бұрын
RuffStuff also sells all these parts individually.
@RyanWithAviators 7 жыл бұрын
If the caliper has dual bleeder screws it definitely is able to be either a right or a left caliper. I feel like that would save on manufacturing expenses too.
@Kurnacopia Жыл бұрын
I've purchased these. They fit perfectly on the left or the right. Great quality as well.
@Skiridr22 7 жыл бұрын
Great vid.
@Granite 4 жыл бұрын
I see a dual caliper setup in my future. I think the brackets come pre-bent now.
@redwhiteblue7831 7 жыл бұрын
You must be the smart one from Bleepinjeep... lol Nice work
@wayneberry1048 5 жыл бұрын
Great job
@chanelkuini5883 Жыл бұрын
Very good
@drubradley8821 7 жыл бұрын
Is there such a thing for the alignment on the rotor to the axleshaft... "centric rings"... ???? Or maybe two centric rings in one.... meaning, one side of the ring aligns the rotor to the axle shaft, and the outer most of the ring (the other side) will align the wheel to the axle shaft???
@miketalbot6974 4 жыл бұрын
Good job
@777smitty4 5 жыл бұрын
there kit is sold out how about sharing the part numbers from the kit i’m shur the caliber is a gm
@josephallen9972 4 жыл бұрын
From the flange of the axle shaft to the housing flange it looks like you have some sort of spacer is that to make up for the drum backing plate? Also what is the 4 bolts that hold the axle shaft in torque spec an the third member nuts torque spec please an thanks?!
@BJBTJF54 3 жыл бұрын
Would rear disc brakes from a 8.8 Explorer diff bolt on? I fitted aussie late model falcon rear discs to a '65 aussie falcon diff. Almost a bolt on conversion That system had the bendix emergency brakes built in. Cheap.
@Mr.Titanium1911 5 жыл бұрын
Brake rotor/drum must sit on the axle's center hub, not on the studs though. Did you install adapters?
@Adanchavez52 3 жыл бұрын
What welding wire is being used on this and what welding settings are recommended?
@caiimaneromocsinaloa 7 жыл бұрын
Doin a conversion on a rear dana 60 8 lugs to a 5x51/2 ANY ADVICE
@mitchcoop1 4 жыл бұрын
we would make a fitting to put compressed air in caliper while tac welding bracket to axel tube (Wich kept everything in place realworld conditions) also we would do more tac welds than in this video to hopefully keep things aligned before releasing air. Also squirt water on caliper & mounts to keep "O" rings and caliper seals cool when doing Tac/Partial welds before disassembly and finish welds. Over kill? probably, but pad placement on rotors and caliper alignment was dead on. (This for stock car racing where brakes have to be on the money)
@charlespartak2435 3 жыл бұрын
sure you got that rotor to slip on the shaft, but your axle registers are way off the same size. how or do you plan on addressing that?
@dehota007 7 жыл бұрын
I love the safety squints lol
@bleepinjeep 7 жыл бұрын
Flash burn sucks. If you don't squint hard enough, it'll get you through your eye lids. I squint super hard. Nonetheless, I don't condone this act and I recommend wearing a welding helmet even when tacking. Its much better for your face... Even though I never seem to wear it until I'm welding.... Tim
@thecatfelix2988 6 жыл бұрын
DJ goralski . I wasnt even paying attention. yes no helmet welds 😃😷👀perfect way to get blind.
@arthurblackburn921 5 жыл бұрын
By adding disc brakes how many inches should be gained if any at all?!
@zachattack745 7 жыл бұрын
The rotor mounts on the inside of the axle flange. Can you make a video on brake lines and proportioning valve?
@phantomwalker8251 5 жыл бұрын
no,p/p valve,with disc.
@jahryljacobs6729 6 жыл бұрын
If you have to do all that cutting and grinding then they need to make a better kit
@PolecatCreekGarage 4 жыл бұрын
@Rick P. some of us cant afford $800 brakes
@UsedEveryDay 4 жыл бұрын
Exactly! Need a caliper mount that bolts in with the four axle bolts, done!!
@waynespyker5731 3 жыл бұрын
If the opening diameter is too small it should be corrected before halving the bracket plate.
@nate5388 5 жыл бұрын
Is that light blue Wrangler a TJ? It’s gorgeous.
@dondeubler3446 3 жыл бұрын
First off , Beautiful job here it looks perfect. Question though. Was the rotor made to go on the inside rather than the outside of the axle. Pulling the studs and putting them through the rotor first may have saved time bending the brackets and lowering the height at the same time.
@frankpryor8308 7 жыл бұрын
Nice...Thx👍
@troutandbassslayer 7 жыл бұрын
Sweet
@coolHandLuke5150 7 жыл бұрын
the stock 28/31 spline shafts will not take much abuse. Been there, done that.
@lelandeggleston1041 7 жыл бұрын
What Dewalt model impact gun is that please.
@bobhope5259 7 жыл бұрын
NICE
@lanceramanui3944 2 жыл бұрын
What did you do about the park brake.
@angeshdarsan8606 4 жыл бұрын
What about emergency breaker?
@robijamalludin1603 4 жыл бұрын
How with hand rem?
@halnywiatr 6 жыл бұрын
@ 15:39 Portable band saw.
@iflytango 5 жыл бұрын
You said ruff stuff came down and had a solution but you came up with bending the brackets. What was ruff stuffs answer?
@bleepinjeep 5 жыл бұрын
they started manufacturing the brackets like that as well.
@BREMSA 5 жыл бұрын
brake rotor should have been on the other side of the axle.... inner side, then it would have fitted and brake disk would have been in place once wheel is removed. longer bolts and no issues.
@pkuudsk9927 7 жыл бұрын
Axle bearings now dickered ,It is a good kit if you have all the other tools .Other wise it is just 2 gm front calipers and a pre cut sort of fit bracket. The hardest part would be making the caliper bolts fit/align right otherwise. How do you get replacement parts now call ben dover.? Cheaper to make it yourself might take longer but just a couple of hours cutting up,drilling and taping a plate of steel. Using the rotor for centering the caliper you're now at the mercy of how well they were cut,some of the cheap one are FAR from drilled right. Beautiful welds and well done to make a one size fits all bracket work.
@omarjacielacostaduarte4823 4 жыл бұрын
Amigo este disco de freno a que carro corresponde ósea para comprarlo como lo pido
@WaffleCopterCO 6 жыл бұрын
Did you have to add a spacer to the bearings on the axle shaft for this kit? I'm looking to switch from explorer brakes to this kit and need to.know...
@bleepinjeep 6 жыл бұрын
Nope.
@WaffleCopterCO 6 жыл бұрын
BleepinJeep awesone thanks! You guys are the best.
@ramkishunkushwah7058 4 жыл бұрын
कौन सी गाड़ी के है भाई डिस ब्रेक
@johnathonjsmith 3 жыл бұрын
Is that a 4in axel?
@dailyfilmfix469 7 жыл бұрын
I want that axle..
@rustybrowneye 7 жыл бұрын
i appricate the video and showing the kit and i will used this video as a reminder of what kit not to buy. i wont beat a dead horse and repeat what the others have already said below me, and i agree with them. the thing i see most trouble some is the rotor covered and renderd usless the centering ring for the wheel at the end of the axle. im sure theres a name for it but i dont know what it is. so now the studs have to carry the weight of the vehicle instead of the ring in the middle. that dosent seem to desirable when bounceing around off road. some one help me out here on the name,, if u know what im talkin about
@352poboys4x4 7 жыл бұрын
if u read the description on ruffstuff's page, he should have put the rotor on the back side of the axle flange not the outside
@rustybrowneye 7 жыл бұрын
Jew Bacca aaaaaaaaaaa ok,
@bleepinjeep 7 жыл бұрын
There are generally two different ways wheels are centered. Hub-Centric, and Lug-Centric. Hub-Centric meaning there is an exact size hole in the center of the rim that matches the vehicle hub and achieves center by seating on the hub as you're describing, and then there is Lug-Centric, which nearly all aftermarket wheels are, which use the lug pattern of the vehicle to achieve center. If you're lug nuts are torqued down, either one is perfectly suitable for offroad, or any other conditions your vehicle will encounter. - Tim
@bleepinjeep 7 жыл бұрын
I didn't want to go that route either. way too much work and that makes replacing rotors or a broken shaft on the trail a nightmare. I don't expect to have any issues with the way I set things up. Thanks - Tim
@garysgarage.2841 2 жыл бұрын
The one thing about this kit that bothers me is you have to bend the bracket to offset it so it sits properly on the axle. Having that metal bender is convenient but most people won't have equipment like that.
@thecatfelix2988 6 жыл бұрын
Nice disc conversion. But were is the hand brakes?😕
@JuanHernandez-ub3ez 4 жыл бұрын
Who needs e brake?
@bobhilly546312156332 6 жыл бұрын
Not where I was expecting to see ford videos
@elmersimon1175 5 жыл бұрын
I have 1996 ford f250 7.3 I would like to know if I can find parts I wanna convert my brake drums to brake disc
@UsedEveryDay 4 жыл бұрын
It's pretty easy to just get the rear end out of a later model Super duty that came factory with disc brakes.
@elmersimon1175 4 жыл бұрын
@@UsedEveryDay oh wow do you what year can be the same?
@UsedEveryDay 4 жыл бұрын
Elmer Simon check this arrival out. Plenty of videos on KZfaq also. wesleyhansen.wordpress.com/2012/10/21/94-97-rear-axle-swap/
@dandahermitseals5582 Жыл бұрын
You coulda got a disc brake Dana 44 off a Ford explorer.
@seapeddler 6 жыл бұрын
Why isn't the rotor hubcentric to the shaft flange ?
@bleepinjeep 6 жыл бұрын
Hubcentric is for wusses
@seapeddler 6 жыл бұрын
I'm SHOCKED !
@gamesofcontent 4 жыл бұрын
God i'm stupid. I closed my eyes and looked away for like the first 4 welds. Instincts take over too fast sometimes.
@chrisstephens6957 Жыл бұрын
I'm surprised they don't include rotors with a deeper "hat" to prevent this from happening...
@biblethumpr2161 5 жыл бұрын
The truss should have been last as a 360 degree weld to the axle tube would be strongest then weld truss to bracket would have been a bullet proof install. Install a schrader valve on caliper to keep pressure on while welding. Who's rotor and caliper are used? Dodge it looks like to me..........if you ever run into trouble a parts store is closer than 3 days away from kit supplier.
@russtynuts 5 жыл бұрын
parking brake ?????
@wlehtola 4 жыл бұрын
Who else automatically closes their eyes to welder flash? Bahaha felt silly but its reflex
@markdrewett149 5 жыл бұрын
Don't cut the retainer bolt down.... cut the hole into a slot... Aussie ingenuity mate.
@1bmwrider 6 жыл бұрын
At 15:48 somebody stole your saw
@redxj4968 7 жыл бұрын
seems like a lot of work just to run only 33s.
@bleepinjeep 7 жыл бұрын
Yep! Sure is - but what the heck... I'm a believer in "over-axled" rigs. Tim
@redxj4968 7 жыл бұрын
Definitely not a bad thing if you decide to go bigger later. I wouldn't consider myself under axled with d30/d44 and 33s, although I shouldn't go much bigger than 35s. But.. If I want to go bigger I might consider going your route so these videos should give me a idea
@PowerlineRider 7 жыл бұрын
numero uno
@240impala 5 жыл бұрын
There are hundreds of disk brakes kits for 9 inch axles and this one obviously isn't the best
@harrygatto 5 жыл бұрын
"hundreds"?
@jdirt1982 7 жыл бұрын
Dis nigga can weld. Exalento
@spiderbrandt4066 5 жыл бұрын
No hand Brake ? the rest is good .
@jameshorrocks2939 5 жыл бұрын
I dont believe your eye lids provide enough protection for welding.
@keithw372 7 жыл бұрын
i say that is a chevy big car caliper .. looks very much like speed way eng. stock car stuff
@bleepinjeep 6 жыл бұрын
GM half ton caliper basically.
@steveogregg6940 5 жыл бұрын
To many mods . Indicates to me . Its not a bolt on kit. Im a welder. But have no brake to bend the metal bracket.
@bradywilliams2666 7 жыл бұрын
So reading the comments. Am I correct that this isn't even the correct way to use this kit, and he screwed up by bending and welding the bracket with the rotors on the front? I was wondering what was supposed to keep the rotor centered.
@bleepinjeep 7 жыл бұрын
Lug-Centric. The studs keep them centered. I don't anticipate any issues with the way I set these up. Thanks - Tim
@bradywilliams2666 7 жыл бұрын
How is the stud going to keep it centered when you have a wheel in between? You show the rotor getting centered with the lugs. The lugs will not reach the rotor unless your running the shoulder style lugs that actually go into the wheel. Used on aluminum wheels. Sorry but that rotor is going to rock.
@bleepinjeep 6 жыл бұрын
1 year later and 15,000 miles on this set up. No issues at all, brakes work great and I have yet to experience any rotor rock. I'm honestly very pleased with the set up! - Tim
@MrWildwilly48 2 жыл бұрын
No way of knowing for sure but if he did not have that rear greased he could well have ruined the ring and pinion they do not like to be turned dry.
@thomashunt7717 5 жыл бұрын
Aye man why not put some new studs on it...
@phantomwalker8251 5 жыл бұрын
9 1/6.but then,why not fit a d60.??.or get full float for the 9".
@phantomwalker8251 5 жыл бұрын
specially made calipers,mmmmm,use chevy 5".same.
@kenmcdade8368 4 жыл бұрын
Spend some money and get a better kit .tight wod
@codysett1 5 жыл бұрын
Wow fuck that kit
@nascarboy445 7 жыл бұрын
number two
@kens11031103 2 ай бұрын
That kit sucks...I've done several 9 inch conversions and bracket should bolt to t bolts on back of axle retaining ring
@johnday2192 5 жыл бұрын
An
@dandahermitseals5582 Жыл бұрын
Hell that kit don't even fit.
@Razorfish 7 жыл бұрын
Autozone rotors? WTF man? Lucky if that shit lasts 1 year on a Civic.
@Razorfish 7 жыл бұрын
Well I guess there is no comeback for that. hahaha
@barrettmills856 6 жыл бұрын
Life time warranty lol on my 3rd set no issues
@bleepinjeep 6 жыл бұрын
Been a year now and 15,000 miles later. The entire rear brake set up including the rotors are still in great shape! - Tim
@bruceisaacs1058 6 жыл бұрын
Looks like a GM brake caliper
@phantomwalker8251 5 жыл бұрын
no e brake,no good.9" axle not good bearings.light duty only.-----,,d60..kits all bolt up,no grind weld.no probs..i would of sold the 9" to some chevy guy,that would pay for 2 d60,s.YESSSS.
@rbuggs3658 4 жыл бұрын
Way too much customizing for this kit... no thanks!!!!
@williamschmidt395 6 жыл бұрын
That is an old Chevy caliper. Nothing special there
@LibertyRocks54 7 жыл бұрын
Ruff Stuff parts are GARBAGE...300 bucks for brake calipers and rotors from AutoZone, and a Shitty made conversion bracket i could fabricate myself.. Terrible product
@bradywilliams2666 7 жыл бұрын
I Used their 14bolt caliper bracket. It fit and worked perfect. But I bought my own rotors,calipers and lines.
@bleepinjeep 7 жыл бұрын
I disagree. RuffStuff has some of the stoutest parts available for serious offroad applications and thousands of people run their products year after year without failure. Primarily they make "builder parts" and have countless items available in that field. To say their parts are "GARBAGE" is simply not the case. They are one of, if not the most innovative and successful companies in the industry and they didn't get there with garbage parts. I did have some trouble with this particular kit on this particular axle, setting it up this particular way, however, I contacted them with my issue and concerns and without delay they gave me new brackets that addressed the problem. I decided to go this route instead of using the replacement brackets. Tim
@tomd1939 7 жыл бұрын
300 bucks for a complete kit that's made for the fabricator is pretty inexpensive I think. most disc conversions run 2 to 3 times that price.
@oilfieldron5800 3 жыл бұрын
Heck gym. You should have just fabricated the whole thing. Ruffstuff kit sucks
Speedway Motors
Рет қаралды 75 М.
Muddy Beards 4X4
Рет қаралды 22 М.
J.C. Bartle
Рет қаралды 15 М.
Контент
Рет қаралды 9 МЛН
Aerox_Tim
Рет қаралды 3,9 МЛН
I met a female trainee driver by chance on narrow road, but I didn't expect her to operate like this
One Day 2.0
Рет қаралды 7 МЛН
😳Тамаев НОВЫЙ ВЫЗОВ ИЗ УЗБЕКИСТАНА GTR НА 2.500 ЛС VS M5 CS LEVEL! #wengallbi #mercedes #cls #1000hp
jamoloniy
Рет қаралды 810 М.