Ford Escape - Exhaust From The Flex Back

No video

Ford Escape - Exhaust From The Flex Back

Рет қаралды 120,148

Күн бұрын

In this video I bring you along as I swap out the exhaust system on this 2015 Ford Escape. I do the intermediate pipe, the resonator and the muffler. Not a bad job but you definitely want to do this one on a lift.
-Enjoy!
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: / southmainauto
CHECK OUT OUR "SMA SWAG" STORE! Go on Teespring and get your very own SMA merch!
teespring.com/stores/the-sma-...
If you don't like Patreon feel free to use the "PayPal Me" link: www.paypal.me/SouthMainAuto
The South Main Auto Amazon Store:
www.amazon.com/shop/southmain...
AES Wave Automotive Diagnostic Tools: www.aeswave.com/cart.php?m=af...
Thank you for all the continuing support!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.

Пікірлер: 912

@howardscott7521 11 ай бұрын

I've seen lots of impressive things on this channel. but getting a cat to sit and shake for a treat may have just taken the cake😀

@robertdoane2164 11 ай бұрын

You may have wanted to boil them weenie's.

@SouthMainAuto 11 ай бұрын

I have taught he a couple of tricks. She really likes her treats haha

@howardscott7521 11 ай бұрын

You are a man of many talents, lol. Welding, soldering and cat training!@@SouthMainAuto

@G31mR 11 ай бұрын

Agree!!

@Android_Warrior 11 ай бұрын

@@SouthMainAuto : You fix cars and cats too!!!!!!!!! 🤣🤣😂😂😹😹😹😹

@JohnnyTalia 11 ай бұрын

Living in Michigan and owning older cars, the efforts to keep up with rotted and broken exhausts have been -- well, exhaustive. No lift, no torch, just the joy of laying on your back grinding and sawing and swearing while the rust crumbles into your retinas.

@shadetreemech290 11 ай бұрын

Yep. Been there done that.

@thegreatiam316 11 ай бұрын

No camera guy , no fancy editing tools , no fluff, no BS, just good ole knowledge sharing to help others. That’s America! 🇺🇸

@jameswasher3938 11 ай бұрын

20 years of using a torch... but let's not forget that hollow-shaft shock absorber fire. That was fun.

@SouthMainAuto 11 ай бұрын

Well there was that one time haha You must be a long time viewer lol

@dans_Learning_Curve 11 ай бұрын

@@SouthMainAutowasn't that long ago!!?? Or was it?! I guess I'm getting old too!! That was quite the show!!

@jasontexter1721 11 ай бұрын

Yeah hit a gas shock with the torch see what happens 💣💣💣

@Averna222 11 ай бұрын

Dang, I haven't seen that one. I don't think I have it in me to look for it, though.

@jamespfitz 11 ай бұрын

Link please

@AlAmantea 11 ай бұрын

The larger flange is there to add weight. This changes the resonance frequency to help control NVH inside the cabin. Some think it's to add rigidity to the flange, but I don't think so. Anything outside of the bolt spread would be useless for that. Using the torch (blue wrench) to remove the old exhaust is actually easier, safer, and faster than any other method. A grinding wheel is difficult to use in tight spaces. A reciprocating saw requires clearance for the blade and could cut through the body tunnel. It would also have tons of vibration, and will bind as the exhaust comes loose and moves, pinching the blade. Not to mention the noise. A torch also has the advantage of "It can't be stuck if it's liquid!".

@SouthMainAuto 11 ай бұрын

I was wondering about the weight aspect of it. Ford has always had weights dangling off their exhaust systems. Way back into the early 90's they had weighted exhausts. Seems legit.

@fascistpedant758 11 ай бұрын

I concur.

@mikemaccracken3112 11 ай бұрын

@@SouthMainAuto The large flange is sacrificial here in the Northeast. Think of it like zincs on the bottom of a salt water vessel😂. Just kidding folks

@dans_Learning_Curve 11 ай бұрын

@@mikemaccracken3112decoy to distract salt from vital components! 😂😂

@joeashbubemma 11 ай бұрын

Or, the factory screwed up and instead of wasting them, they just welded them on. I doubt aftermarket mfrs. care about resonance over material cost when they could have added that mass somewhere else using cutoff/waste material.

@alanmorrison3598 11 ай бұрын

Nothing like coffee and an Eric O video first thing in the morning!! I must be nuts!

@merln1 11 ай бұрын

In my 45 years + in the exhaust world, the blue tip wrench is your best friend.

@billziegmond4943 11 ай бұрын

My grandfather was foreman in a foundry and taught me how to use a torch. In the rust belt a torch is your best friend. I watched Rainman Ray do an exhaust the otherday using a cut off wheel. I found myself yelling fire up old Vic and chop it off already.

@riaanlouw1874 11 ай бұрын

I also watched that Rainman Ray video on the Mustang exhaust, and after the 3rd or 4th cut-off wheel, I had the same feeling. Saying to the screen..."Just get a torch, like Eric O."

@mikeburdi3464 11 ай бұрын

@@riaanlouw1874 I don't think dude really knows how to use a torch or a welder for that matter. But I'm sure he might be good at other stuff.

@ralphsullender2474 11 ай бұрын

Mrs. O has a lot of patience with you. Watched a guy at a muffler shop cut exhaust off with a tool with roller cutters. He said some times he would torch them off cause the tool wouldn't fit the space, he didn't like getting burns from sparks and hot ends. The end result is what counts!

@LadyAnuB 11 ай бұрын

And you get practice for stealing catalytic converters 🤣

@johnt.848 11 ай бұрын

Pipe cutters are more practical for manufacturing, not so much for disassembly on the vehicle.

@waltstrait5807 11 ай бұрын

Watching you with Luna shows us why Mrs. O chose you she knew you had a good heart and that you treat things the way they should be treated!😻

@grahamjackson2823 11 ай бұрын

Everyone needs a workshop with the work ethic of Mr and Mrs O. I’d take my car there but it’s a hell of a drive from the north east of England.

@izzydizzy1115 11 ай бұрын

I recently watch another KZfaqr mechanic from another State do an exhaust on a Mustang. He used sawzall's and cut off wheels and seem to be struggling in my opinion. I kept thinkig, dude, don't you have a torch? I guess I'm old school and am retired, but when I turned wrenches for a living, the torch was my friend. Keep on Torching Eric O! Love your channel.

@jamesbruno5896 11 ай бұрын

Mrs O is a national treasure! Nice repair & thank you for the video!

@NurseRobert 11 ай бұрын

Mrs. O needs her own youtube page..

@ronaldclark1178 11 ай бұрын

A someone who has used a torch all my like (I'm 74) it is amazing how few people can wash a nut off bolt and still use the bolt. Great job Mr. O. Love your videos!!

@BigEightiesNewWave 11 ай бұрын

Eric O is the torch-bearer of KZfaq mechanics.

@4b131 11 ай бұрын

I'm with you, torch is king. The fact that your skill with it allows you to cut off nuts without damaging the stud threads should quell any concerns as to how precise the torch can be. Nice job, I'm off to my shop now.

@rickconstant6106 11 ай бұрын

I'm in the UK, and I had a diesel Peugeot from new. After 15 years, the original exhaust needed replacing, so, as the rest of the car was still good (no serious rust problem here), I decided to spend a bit extra and fit a genuine factory system. 4 weeks later the car was rear ended at a red light and wrecked.

@markh.6687 11 ай бұрын

OUCH!!

@Tegelane5 11 ай бұрын

I'm from Estonia and had 13 year old diesel Xsara- it's downpipe broke off straight from turbo- had only that welded together- no problems from exhaust for a few years I drove it more. With OEM stuff I would rather repair just that broken bit- cheap aftermarket stuff "Walker" etc would be worse in a year than "temporarily" welded OEM stuff. Maybe it's not option in UK, but OEM exhaust parts (and body panels) are few things that should be taken from car wreckers.

@bradensmith888 11 ай бұрын

I'm trying to fix up an old Peugeot 505 turbo diesel here in the states. Any chance you could buy parts for me and ship them my way? Lol

@johnhutchison9782 9 ай бұрын

It could have happened when you were leaving the exhaust shoppe😅

@jasonhenry5396 11 ай бұрын

Whoever invented the hanger removal tool is a blessing to all mechanics.

@billmalec 11 ай бұрын

That's something I don't miss after moving South. Haven't had to have any exhaust piece replaced in 25 years. Used to be every few years it seemed liked.

@markh.6687 11 ай бұрын

I drove vehicles for years in the Salt Belt (Illinois) and never changed exhausts, so they must have been the factory stainless ones.

@fredmalito9869 11 ай бұрын

Never question a man who trained an outside cat how to sit and shake. He has way too much patience for you! I’m wondering if you could send that Walker exhaust out to be jet hot coated, maybe that would make them last a lot longer.

@johndelta00 11 ай бұрын

I’ve had great results with just using VHT high temp paint. I don’t live in the salt belt anymore though so I can’t speak for its salt resistance.

@zx8401ztv 11 ай бұрын

Mr O, you always do the best you can with available parts, i wish all shops were like yours. That exhaust looks spot on :-D That cat is lovely, such a friendly little sole. ( i don't think it's just the food you give it )

@christopherhorner9380 11 ай бұрын

That was very impressive. Getting a cat to sit and shake. True skill!

@cal4625 11 ай бұрын

Everybody's an expert now days. Thanks for the video!

@bassiclymike 11 ай бұрын

Mrs O. Is fabulous, and that is a super sweet kitty. Hang on to them both!

@pirtatejoe 11 ай бұрын

About the flange sizes: According to a Ford engineer, with the larger size primarily on the down-pressure side, their testing said it helps with creating a tight seal with the gasket and allows for tighter torque to be applied without deforming the flanges and prevents flex between them.

@AceOnFire28 11 ай бұрын

As a mechanical engineer, I have a hard time believing that anything larger than the area between the two bolts, or larger than the mating flange for that matter, is helping. Thicker flange? Sure. It will increase the rigidity. But to add more material outside the "clamped" area doesn't make sense to me. That being said, I'm sure Walker just matched OEM and didn't put an iota of thought into it lol.

@thewayidoit8895 11 ай бұрын

@@AceOnFire28I have paper to be a mechanical engineer, chose a different career. However, I concur.

@jeffkosiba1071 11 ай бұрын

My guess would be for NVH. The added mass likely used for changing or moving an exhaust mode resulting in less Vibration / drone. Cheaper than adding a tuned damper.

@Nitrodr1 11 ай бұрын

More than likely, one style fits many applications

@dddevildogg 11 ай бұрын

It's what Walker sourced from wherever they got them (take a guess)

@JoseSilveira-newhandleforYT 11 ай бұрын

Good job, Eric! All tools are dangerous - it's up to the operator to use them safely. Many years ago, I was told "a tool is only as good as the person who uses it", and you know how to use a torch 🙂

@danblack8774 11 ай бұрын

From a dealership automotive tech to an awesome shop tech/owner. Top notch diagnostic job ol son,and excellent job breaking it down for the viewers. 👍🏻

@tombeilman5579 11 ай бұрын

The cat asked if you washed your hands before giving me a treat. You need to teach Rainman how to use a torch. Lol

@Parknest 11 ай бұрын

Eric used his cutting torch day in, day out so I'm sure he knows what he's doing and is entirely comfortable with it. I only recently got the sheep reference with the Fluid Film and I used to work in the wool textile industry many moons ago. I'm sure Walker supplied Ford with OE exhausts at one time.

@lyndonsia5868 11 ай бұрын

He knows what he is doing. Thanks.

@smarthome2660 11 ай бұрын

Good morning Eric, One of my female cats love hugs, so I taught her to put both front paws into my hand once she is on the arm of my recliner to get a hug. She snuggles in close and seems to want to stay forever. My other female gets up on an ottoman next to my chair and does a little mew, then leans over and lays her head down on the arm of my chair to get a hug. The youngest tucks me in bed every night by laying on one of my hands till I start to dose off, then moves down to my feet. I am allergic to cats, go figure, I have 5 of them. BTW, my cats only get treats if they come in for the night. They also don't get wet breakfast if they stay out all night.

@freetolook3727 11 ай бұрын

Here in The Great Industrial Northeast, a cutoff torch is the number one tool for convenient fires on old vehicles! 😂😂😂

@porkchop4604 11 ай бұрын

The best thing about SMA is the burning, the grinding, the smashing and the ole UGaduga sounds. Progress in action! All the best Eric. Love your comment about the hotdogs, garbage meat. Get the smoker going!!!!!

@s.j.5850 11 ай бұрын

The hardest part was taking the plastic off the muffler tips! As for the oxy/acetylene cutting torch the main concern (for me) would be those hot sparks. Saw one guy get a hot one fall in his shoe!

@kd7cwg 11 ай бұрын

Those walker tips look better than the ford ones that you could see the exhaust pipe.

@fernando13e 11 ай бұрын

I just showed Luna to my mom and she was genuinely impressed.

@mikeburdi3464 11 ай бұрын

The torch is my Canadian speed wrench! 👍🏻

@user-ro6xx1yl3c 11 ай бұрын

Torch is fast, nice and quiet. Great for the neighbors.

@robpeabo509 11 ай бұрын

The gas axe is the tool wee need to see from time to time on your channel Eric! Who doesn't like a naked flame & spark flying every where. Plus the occasional "You Mother Lover" as a piece of molten metal makes gentle contact with your skin is part of the entertainment! Keep cutting with whatever tool you see suitable for the task at hand 👍.

@jeffelliott689 11 ай бұрын

Watched a old video of Ms Hanna changeing her front brakes on her Malibu an I must say you taught her well. She even did the thing with the brake cleaner perfectly. When you retire she can carry on your legacy Mr O.

@gilberesrepairs 11 ай бұрын

Good job 👍 Where the aluminium heat shield meets the steel studs and nuts, it will always get eaten away because they are “dissimilar metals” and this causes “galvanic corrosion” That back box has a shocking junction with the centre pipe. We have Walker Exhausts here in the UK and they are low grade here as well 😂 Excellent vid as ever 👍

@curtgomes 11 ай бұрын

Appreciate these really informative videos. I live in California. I have a 1995 Toyota P/U with 200K. The exhaust system is in perfect condition after almost 30 years. For those of us not in the rust belt this stuff always amazes people like myself...

@mod_incllc3235 11 ай бұрын

I've got a 95' T-100 myself w/180k and the original exhaust in sunny FL.

@curtgomes 11 ай бұрын

@@mod_incllc3235 Mine also is a T100 SR5. Honestly, in 28 years it has never failed to start or run. These trucks were know for easily rusting. I doubt there are very many of these left in the rust belt...

@dwb812 10 ай бұрын

Love the "Don't be a doofus" speach referencing the use of cutting torches! 😅

@handymandev03 11 ай бұрын

I do remember Eric you set fire to a shock absorber from memory 🤣🤣

@larrygreen1915 11 ай бұрын

Luna is the ONLY cat that I know of that sits and shakes on command...cute

@miket1322 11 ай бұрын

Eric, you take a lot of flak over your welding, but the beads you have welded on flanges look superior to the bead on that factory jumbo flange!

@AntonioClaudioMichael 11 ай бұрын

Luna Sitting and Shaking hands for a treat nice work Eric O 21:00 @South Main Auto Repair LLC

@gcrauwels941 11 ай бұрын

Awww Luna. My wife had a Siamese mix before we got together. Misu looked derpy but I taught her at age 11 how to give a paw, then the 'other paw' for a treat. She was such a good girl. As far as the cutting torch, if you know how to use it, it's the best time saver.

@user-rq7wq9hr7w 11 ай бұрын

Always waiting for the next video. Hello from England, sunny for once. 😅

@ronomdalen3186 11 ай бұрын

Eric I guess between your generation and mine we didn’t have all the battery tools so we learned to work with the tools we had, although in this area gas and oxygen have become very expensive but what hasn’t. KEEP UP THE GOOD WORK I ENJOY YOUR VIDEOS

@Guysm1l3y 11 ай бұрын

Yeah exactly, it's not like sawzall blades or cutoff wheel discs have gotten cheaper lately.

@donaldpeterson9521 11 ай бұрын

Erik a HUGH difference between having the knowledge and skill to use a torch and sitting in front of your computer telling some one how to use a torch. Learned torch use at 12 years old, and have not yet burned down anything that I did not intend to burn, over 60 years with a torch!

@BigAlWillis 11 ай бұрын

I grew up working on cars in Michigan ,so yeah know all about the rust. I moved to Georgia over 20 years ago & my 15 year old vehicle still has the original exhaust. That's one thing nice about southern vehicles. You will never need a new exhaust unless you're changing the sound because its not going to rust that's for sure. Enjoyed the vid

@chucktx5957 11 ай бұрын

😄 This video is the definition of "Not my first rodeo". Watch, listen, learn. 👍👏😉

@dozn1111 11 ай бұрын

You always make fixes look so easy 😂

@mikechiodetti4482 11 ай бұрын

AP and Walker. Back in the 60's and 70's, those were the systems my Dad installed at his shop in Franklin Massachusetts. And like you, those systems didn't last more than 2 years. Salt and sand corroded out the car (before aluminumized exhaust systems and body parts), so maybe 6 to 8 years with a car or truck and time for a new vehicle. Good one Mr. O. Nice to see Mrs. O and of course your dependant..the cat.

@williamschmitz971 11 ай бұрын

Mrs. O is sure a good sport for putting up with you Eric!!

@darinworthington 11 ай бұрын

For stuff like that 9:55, you can use VW style push washers. They are not threaded, but look like a bunch of fingers pointing toward the middle.

@danielluber209 11 ай бұрын

I love it when you use either the torch or welder!! I've learned so much information from your techniques and repairs..

@robertcochran7103 11 ай бұрын

I want to approve of Mrs. O's cooking with cast iron cookware. I use an enameled cast iron dutch oven for cooking omelets and find it gets my omelets done quite well. Cleaning enameled cast iron is easy. You are a great family guy. Your videos are essential viewing for me. That is a good exhaust pipe replacement, too. I am learning how it is done from you.

@JamesBrown-cx3xf 11 ай бұрын

The exhaust A+ , the hot dogs OMG ! Put them in a bowl or dish cover them with a bowl or dish , microwave 1 . 5 minutes , put them on a freihofers bun slit them down the middle add mustard in the the slit microwave for 8 to 10 seconds and enjoy . Simply the best !

@timerickson7056 11 ай бұрын

I use a torch but I gotta say a machinist I knew he was a old timer and made a lot of heavy logging equipment in his stop. He made his own tools lathes and crap . Anyway when the big drive line shop was charging $400+ to build a drive shaft he charged $35+ parts . I did a lot of custom stuff and he made me a pile of drivelines and I never had a comeback for a driveshaft. Anyway one day I went to his shop and seen him tearing out of his shops driveway in a station wagon hauling ass down the road leaving a trail of fire behind him . He drove 3/4 mile to the fire station where they put out the flames no harm . He drove back to his shop leaving a small trail of gasoline. He was doing a weld on trailer hitch on someone's car and touched his rod to the gas tank and blew a hole in it as the gas trickle out it ignited probably on the weld he didn't want to chance losing a fire with the shop extinguisher. So he drove to the professionals. He was about 1000 years old when I met him . He just couldn't stop working.

@MickayG 11 ай бұрын

I think the torch is more precise/easier to handle and will fit into tighter spaces... Sawzall you always need the extra space for the moving blade and it can be kinda jerky and bouncy, a cut off is difficult to use in a lot of angles and spaces.

@markh.6687 11 ай бұрын

Don't forget using a jigsaw in a pinch with a metal-cutting blade. It has a shorter blade stroke.

@wirefeed3419 11 ай бұрын

@@markh.6687 A jigsaw is too bulky to work in the tight space, You can get a full variety of type and length of blades for the Sawzall, like anything pick the correct tool makes the job go easier. The problem is good blades are not cheap don’t last if used wrong. A torch will last a long time be safe and get the job done quickly in the right hands.

@markh.6687 11 ай бұрын

@@wirefeed3419 Certainly the jigsaw won't work for every job, just as a torch won't. And yes, those Sawzall blades get pricey; I burned through several cutting old drywall with plaster on it; never knew that ate the blades up like that, so had to get some higher-end ones made of Unobtainium or whatever until deciding to just sledgehammer the drywall down and be done with it.

@thewayidoit8895 11 ай бұрын

2 hours down I86 we have a nice little exhaust shop in Busti, NY. Does custom stainless, very reasonable. Carlson's muffler and Brakes. Friendly. His opening line : " did you gou to jamestown high?" Year graduated? 1980- whips out the yearbook! Hahaha!

@ginamiller6015 11 ай бұрын

I don’t use an oxy-acetylene torch because I don’t have one. I get the job done with either a cutoff wheel on the grinder or some other cutting method. Not nearly as fast as the torch but as a DIY-er I don’t need to be profitable. Thanks SMA for showing us how to get ‘er done, and all of your excellent videos. I’m a much better mechanic thanks to you!

@isaacwalker7863 11 ай бұрын

Let’s be honest, a torch is just more fun because there’s fire. Any excuse to use fire, we will use it.

@thomasedwards3372 11 ай бұрын

Another job well done. Good work Eric. 😎

@DirectCurrent4u 11 ай бұрын

With almost a Million Subscribers i wouldn't change a single thing! Keep doing what Your doing my friend!🙏🏻👍

@TargaWheels 11 ай бұрын

The big flange might be for a variety of cars, not just that one.

@RDLouks 11 ай бұрын

As being an old retired mechanic working for flat rate you learn the "Old Victor" is a real time saver. One thing I have noticed is when you are using the cutting torch you tend to have a carburizing/reducing flame, is that by design?

@sewing1243 11 ай бұрын

Long ago when I was stationed at NAS Key West I took my vehicle to a one man shop ran by a retired Navy Chief. He had a franchise from a company that supplied him with an exhaust pipe bender, the various sizes of pipe (in if I recall correctly 8 or 10' sections), mufflers, and misc hardware. He had an index of cards that showed where the bends went (and how much to rotate the pipe at each bend) for most makes and models of cars. I had a 1969 Javelin at the time with headers. He just welded the bolt on collector to pipe adapters to a section of straight pipe and then used the card for the AMC Javelin to bend the pipes that went over the rear axle to fit. Instead of the recommended stock mufflers he installed some Corvair Turbo mufflers that made the care sound good (reasonably quiet at idle with a nice low frequency rumble, but you knew when I got into the throttle 🙂🙃😉😊). His prices at the time was good (even as a poor enlisted guy I was easily able to afford the fee for the complete dual exhaust system.)

@kaafromoz 11 ай бұрын

Eric I could watch you cut stuff all day with the torch, no idea why people have issues with it I like the fire and flames and smoke. I think the exhaust flange was a buy 1 get 1 for free offer available in one size only. And also nice to see Mrs.O taking good care of her man as she always does. Keep Safe Keep Strong 🦘🦘🦘🦘💖💖💖💖

@tomoconnor7543 11 ай бұрын

Love your work Mr O. Thanks for all your hard work.

@iamnoone. 11 ай бұрын

My guess is that the flange is used on many different exhaust systems, so they use one size blank for it

@chipdayton1625 11 ай бұрын

That was my thought, too.

@billbrown6889 11 ай бұрын

When I was in college, '70s, I stripped military jeeps for parts for the rural fire program in kansas. I learned real quick which bolts never came out so I just torched them off. I never set any of them on fire

@Don_Iocco 11 ай бұрын

The Walker rot right around where the hangers are welded on. In the PRNY. I put 3 whole cat back exhaust on a 2000 Camry. Thanks for the video Mr. O!

@calholli 11 ай бұрын

You really should get a plasma cutter Eric. It's just like a little welder that you tie in your air hose to, and as it's striking an arc -- your air blows it away like the torch does. It would pay for itself 5x over just by the amount of gas you save by not using your torch as much.. You can usually find them used for well under 200. Totally worth having in the shop.

@beast36001 11 ай бұрын

bad move too much sparks, are u drunk? air moving the sparks all over, 200? lol you get junk for that

@calholli 11 ай бұрын

@@beast36001 That "junk" will cut just as good as the torch up to a certain size. It doesn't sling any more sparks than the torch. The torch will still be used for a lot of things -- heating up bolts etc. etc.. But you can get away with using a plasma cutter on most of your simple cutting and not waste gas. Also you can take any little handheld sheet metal shield and direct the sparks any direction you like-- it' not an issue. If you've never used one and don't know what you're talking about, then you should probably not give advice about it.

@jptrainor 11 ай бұрын

I use a peice of aluminum as a heat shield washer to avoid growing the size of the whole. My aluminum of choice happens to be a cat food tin lid.

@AntonioClaudioMichael 11 ай бұрын

Great exhaust install as always Eric O @South Main Auto Repair LLC

@loisrinehart6755 11 ай бұрын

Fire can be your friend or enemy. However, any tool in the wrong hand can be your enemy. I've used a torch since I was 15. That's somewhere in the neighborhood of 60 years. Torch is much faster and easier to use, I think. I sti;; like an oxy welder to. Great videos sir. Keep em coming.

@charlesschneiter5159 11 ай бұрын

Hmmm... re exhausts rotting away this quickly: Would it help to cover the exhaust with high-temperature resistant color (like the one you use to paint ovens and some such)? Just a thought... Thanks for another entertaining and instructional video of yours! Oh - quite impressing how you trained your cat! Can I send in our dog for some additional training? 😄

@rickconstant6106 11 ай бұрын

What would work better would be the makers using a better quality and gauge of steel.

@markh.6687 11 ай бұрын

Exhausts also rust from the inside, due to water vapor and condensation from combustion, so the painting might not buy much time. That, and Walker apparently using metal-coated thin cardboard nowadays. Used to be a respected brand.

@charlesschneiter5159 11 ай бұрын

@@markh.6687 Ahhhh... silly me - didn't think about condensation... well, if Walker and others would use decent steel plus perhaps the coating, that would probably give a more decent life span..?.. It's a pity that the flood of China crap inundating us all has pushed prices down so much that good quality is considered 'expensive' now a days...

@markh.6687 11 ай бұрын

@@charlesschneiter5159 The typical American CEO's gotta earn those huge bonuses somehow, so they destroyed quality along the way. The more junk they sell, the more junk parts they sell to repair it; the accountants approved it. Everything is by the lowest bidder to the lowest quality standards that will make it through the warranty period (if that; sometimes they barely make it off the dealer's lot!).

@MoparDan 11 ай бұрын

Eric, my guess is that the flange on the resonator is a larger size to help dissipate the heat during operation. I enjoyed seeing your trained kitty in this video. I didn't realized a cat would do dog tricks as well.

@paulwelch6336 11 ай бұрын

Not just north eastern thing. Knowledge confidence brother is a must.

@johnjames432 11 ай бұрын

I watched a guy at the salvage yard cut off a gas tank shield with a torch for a ford 1 ton that the dealer wanted 350 for new for 50 bucks, it was a good day for both of us

@GarnConstructionInc 11 ай бұрын

I hope you Escape the torch drama. My shoulders get exhausted just watching overhead repair work!

@deanturner72 11 ай бұрын

I've got a 2008 Town and Country that I've owned for 8 years and never had a leak in the exhaust system. I'm in Alberta Canada, a windshield won't last 6 months before you've got a crack but the body of cars last a long time. No salt on the roads in the winter just sand and the odd small rocks mixed in. Side note we have a Luna in our family but she is a dog. Keep up the great videos, I watch them regularly.

@1232bluejays 6 ай бұрын

They actually do use salt in Alberta

@deanturner72 6 ай бұрын

It's a mix of 3 percent salt and 97 percent fine gravel when temperatures are minus 10c or lower. Which would probably be most of our winter. Not enough to rust out my van.

@sixfivedome 11 ай бұрын

The “push push push” line is gold! If I’m not mistaken it’s from when Mrs. O was in labor. Been watching you for years. Keep up the great work man!

@dentech4710 11 ай бұрын

Mrs O is a good sport. Enjoyed the exhaust job.

@2-old-Forthischet 11 ай бұрын

Playing with fire is such a satisfying thing!

@yam91racer 11 ай бұрын

I was waiting for the after market junk comment Mr O didn't disappoint

@grahamcooper3399 11 ай бұрын

Everybody (well, almost everybody) is talking about the use f cutting torch. I think/trust Eric completely. Seriously, someone who can train a cat to sit and shake a paw for a treat?? Now THAT'S impressive! I'm curious how the meat sauce turned out! :)

@rickharper1497 11 ай бұрын

Enjoyed the video as always, I like my sausage dogs done on the grill with fried green peppers and onions on a hoagie bun. Like chilli dogs too!!

@jimwilhelm4343 11 ай бұрын

Great video. Extra credit for some Luna action. Thanks. Good kitty

@steverichdrummr 11 ай бұрын

Mr O., I have watched quite a few of your videos and have massive respect for you and I learn so much from you, as I'm a non professional who just tries to do what I can myself. But, lol, I'm calling you out on this one. How dare you have a complaint to the poor and tolerant Mrs. O. About those perfectly cooked dogs? My wife would tell me buy 'em yourself and cook 'em yourself. You don't know how lucky you are.

@LesReeves 11 ай бұрын

The only thing I don't like about a gas axe is I don't have one & can't afford one Cheers Mr & Mrs O. Thanks for the video.

@kenmohler4081 11 ай бұрын

Long ago I worked at a tire shop that also did about anything under a car. We used the torch on exhaust and to cut the nuts on the single nut end of shocks.

@patarmitage2250 11 ай бұрын

Cutting torches are a must in a shop. Especially in the north. Back in the day we use to have to cut slack adjusters off dump truck to replace them. I learned the hard way not to do it when the customer was watching 😅😅

@patarmitage2250 11 ай бұрын

I have a mini set at home. Very handy.

@kevinkoepke8311 11 ай бұрын

A friend of a friend of my 2nd cousin on my mom's side told me the reason for the oversized flange is that the same exhaust pipe is used on the APU for the M1 tank. And I'm sticking to it. Thanks, Eric!