Ford F100 ABS headliner install plus cleaning tips and tricks Episode 336 Autorestomod

Рет қаралды 41,795

Autorestomod Manic Mechanic Gasoline Media

6 жыл бұрын

How to install the National Parts Depot 1967-1972 F100 ABS headliner part number F-51968-7P. We show tips for reforming the headliner. How to install an ABS truck headliner alone. How to clean up the visors. Tips and Tricks for how to get the correct color for interior trim components. This headliner is for the 1967, 1968, 1969, 1970, 1971, 1972, Bumpside Ford F100.
www.autorestomod.com/ / autorestomod
Thanks for watching!
Jeff Ford Contact:
Jford@autorestomod.com
Parts:
www.npdlink.com
Headliner Abs-Plastic Paintable: F-51968-7P
Acousti-Shield Kit, Sound And Temperature Insulation: F-011180-6AK

Пікірлер: 42

@ipdjbt 6 жыл бұрын

Scrubbing Bubbles bathroom cleaner is surprisingly gentle and works very well on vinyl. So sorry to hear about your loss, Jeff.

@AutoRestoMod 6 жыл бұрын

We'll try that Maxey. He was a great man, I will miss him horribly.

@M6T7Y 6 жыл бұрын

I am sorry for your loss. My condolences to his family and yours.

@TimmyMoza 6 жыл бұрын

RIP David Thompson. Sorry for your loss. Great vid series thanks for putting this out.

@CarManiac125 6 жыл бұрын

Again thanks for the install vid I'm gonna be doing this next summer. Sorry for your loss brother, your in my prayers

@nated7229 3 жыл бұрын

Love the quote at the end, a friend of mine came to mind makes me appreciate him more. sorry for your loss even now as time has passed im sure it's easier but the void is still there. God bless

@AutoRestoMod 3 жыл бұрын

May God bless you as well. Yes, I miss David, he was a great friend.

@elizabetharredondo6043 6 жыл бұрын

Jeff....you know I needed this!! 😂✊ thank you!! Love watching your vids! We gonna get along just dandy 👌😁

@randydarcey2947 2 жыл бұрын

Sorry for your loss.

@AutoRestoMod 2 жыл бұрын

Yeah that one still messes with me even today.

@randysrestoration 6 жыл бұрын

Jeff, You should get yourself a Hotsy & a bit of "Magic Soap" in about 10 seconds per side you would be amazed. Seeing the magazine covers on wall reminds me My '70 Cyclone Spoiler was on cover of one of the first ones.

@cutworm59 6 жыл бұрын

God Bless you BOTH!

@theovallas 6 жыл бұрын

Good tips, as always. The trim around my headliner is chrome ('72 Ranger). I used some 0000 steel wool & it made the little rust spots disappear. I can't wait to add some heat shield & sound deadener. Sorry to hear about your friend. You're in my thoughts and prayers.

@DavidDelgadoMusic 11 ай бұрын

Love your videos. Learned so much. What I am wondering is if it is possible to use an abs plastic sheet to make a headliner for 67 mustang. With shipping the one pieces from npd is almost 800. Any help would be great.

@rob69270 6 жыл бұрын

That headliner looks great! Sorry to hear about your friend.

@williamford6142 6 жыл бұрын

Another goodun..Love you Bro.

@jupitergrl 6 жыл бұрын

Thank you, Uncle Jeff.

@AutoRestoMod 6 жыл бұрын

You are welcome hon.

@uniflo2609 6 жыл бұрын

I am sorry for your loss.

@stephengouze3896 6 жыл бұрын

My condolences Jeff take care

@howardwhite9773 6 жыл бұрын

Condolences Jeff. Peace to all.

@mattfarahsmillionmilelexus 6 жыл бұрын

Sorry for your loss, Jeff. I think most of us know how it feels. It's pretty bad.

@tjhamer3 6 жыл бұрын

good vid

@elaineshoffner518 6 жыл бұрын

i have a 1972 ford f100 i gat same car wash to clean my inteior it woks good as dawn

@dumbass3770 6 жыл бұрын

If you use shark skin it will seal the metal and keep the metal from rusting again

@davidsullivan7455 6 жыл бұрын

Condolences. Tough to lose a friend...

@TheZaciechan 3 жыл бұрын

The headliner I received came with a Velcro strip. I’m assuming it should go down the middle and attach the center of the headliner to the support brace to help it from drooping. Did you do this as well?

@AutoRestoMod 3 жыл бұрын

There wasn't a Velcro strip on ours but they may have changed the headliner since then.

@subaruVaggos 6 жыл бұрын

My condolences Jeff...May his soul rest in peace... As for the video I have a question. If the ABS plastic reacts to heat and becomes soft when the car left to direct sunlight with windows closed, wouldn't the headliner sag down by the heat created inside the cabin? Shouldn't be glued directly to the roof then support it with the trim?....

@AutoRestoMod 6 жыл бұрын

No, no glue, the headliner is designed to float to a degree. It won't go super soft, only accept a "roll" in a change of temperature.

@chrissplace392 6 жыл бұрын

My condolences.

@Redneckofgaming 2 жыл бұрын

Can I just use thin sheet of wood wondering because those headliners are not cheap and it already has old wooden headliners in

@AutoRestoMod 2 жыл бұрын

use this: www.lowes.com/pd/47-75-in-x-7-98-ft-Smooth-Brown-Wall-Panel/3014304 That is essentially the same product as Ford used.

@Redneckofgaming 2 жыл бұрын

@@AutoRestoMod thanks so much showing what I needed

@webslinger67 4 жыл бұрын

you didnt use the spring clips?

@AutoRestoMod 4 жыл бұрын

Mine were missing.

@jedclampett6466 3 жыл бұрын

I would have laid down a wet tee shirt and then used a clothing iron on low heat to relax the sheet of abs.

@AutoRestoMod 3 жыл бұрын

Good plan! I might try that when I go back in (Had to remove it for paint recently).

@sansui1968 6 жыл бұрын

oven cleaner is my friend less alumina brass copper everything elks ill squirt it on God bless you n prayers in Jesus name for your loss

@brunoreinoso2409 Жыл бұрын

hahaha i really know how that feels 2:30 min

@AutoRestoMod Жыл бұрын

Perhaps one of the most frustrating headliner installs I've ever done lol.

@MrCaprinut 6 жыл бұрын

I am sorry for your loss.