Ford Fusion: Front Lower Control Arms / Tie Rod / Tire /Alignment

Ford Fusion: Front Lower Control Arms / Tie Rod / Tire /Alignment - PART I

Рет қаралды 193,581

6 жыл бұрын

In this video we start the process of replacing the front lower control arms / ball joints and the outer tie rod end on this '09 Ford Fusion. It came into the shop with a customer complaint of a "shimmy" and "clunk" in the front end. Doesn't take long to find the worn suspension parts and broken belt in the tire! -Enjoy
* Flip Socket (18.5mm x 19.5mm): amzn.to/2FJAOZf
* OTC 6295 Front End Service Set: amzn.to/2F47ZcX
* BIG NASTY: amzn.to/2GSK2Sk
* Astro 40SL 410 Lumen Rechargeable COB LED Slim Work Light: amzn.to/2F379x4
* .498 CHUCK W/ INSERT: amzn.to/2GUlDeT
* .498 1 Inch Dia. Hammer -2Pack: amzn.to/2FfKi0k
* WD-40 Specialist Rust Release Penetrant Spray: amzn.to/2F48EuX
Part I: • Ford Fusion: Front Low...
Part II: • Ford Fusion: Front Low...
Part III: • Ford Fusion: Front Low...
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: / southmainauto
THANKS A MILLION!!
--Eric O.
If you don't like Patreon feel free to use the "PayPal Me" link: www.paypal.me/SouthMainAuto
The South Main Auto Amazon Store: www.amazon.com/shop/southmain...
AES Wave Automotive Diagnostic Tools: www.aeswave.com/cart.php?m=af...
WANT AN "SMA" STICKER OF YOUR OWN!?!
Simply send and E-mail to SMAstickers@outlook.com including: your shipping address and e-mail address in the text, I in turn will send you a Paypal invoice for $5 each USA or $6 each international. Let me know how many you want and as soon as the Paypal invoice is paid I will ship them out ASAP! Thanks for your support of our channel!!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not South Main Auto Repair

Пікірлер: 496

@bigscout1584 6 жыл бұрын

Built Ford tough...tough to work on

@Mike-we3rb 2 жыл бұрын

Built like a moron*

@chungaleta1234 6 жыл бұрын

Looking forward to part 2. I came across the same situation working on my S10. Replacing upper and lower control arm bushings in my driveway. What was supposed to be a 2 hour job, ended up as a 2 day nightmare. No matter how much I learn from these vids... Without a big nasty and the rest of a shop's gadgets... I feel incapable of doing most jobs.

@funnypranker34 Жыл бұрын

Welcome to the rust belt buddy. Up here it’s easier to replace the entire suspension then just the bushings

@jmx10 6 жыл бұрын

Watching big nasty at work is so satisfying

@86CJ74U2NV 5 жыл бұрын

This is one of the hardest ball joints I have ever had to take out of a knuckle. Once it came out, the sleeve came with it. To get the sleeve back in, stick it in the freezer overnight. I used a grade 8 three inch bolt and washers to "pull" the sleeve into place. Worked like a charm.

@LaMaRaGe0622 6 жыл бұрын

Man watching you use the earthquake makes me want to buy it tomorrow. That thing is a beast.

@petersamuel6597 5 жыл бұрын

try the milwaukee 2676 its 1400 LBS torque best so far on market

@CheezyDee 6 жыл бұрын

I've worked on enough Fords of my own to know where to place strategic holes to remove nuts and bolts in dumb places. A really long prybar helps too.

@frugalprepper 6 жыл бұрын

Loosen the sub frame again pry the front corner of it down (while supporting the trans with a jack and board) and you will get the clearance. I did a 07 last year (or helped do one). Looks the same.

@BrianWilliams009 6 жыл бұрын

I lost it at 26:05! Wife was wondering why I laughed so loud:)!! Big O, you're pretty funny when you want to be.

@lasegundaenmiendagmail8170 6 жыл бұрын

Iwhat I like about your channel is the diversity. From simple to more complex jobs. I am learning a lot and entertaining myself at the same time!

@Cowboy_Ash 6 жыл бұрын

Why you little.... now I cannot sleep. To be continued!!! Very entertaining and informative. Thanks.

@KCautodoctor 6 жыл бұрын

Based on the amount of comments complaining about this design, they must not work on many modern vehicles everyday. This is very common now-a-days to have to remove major sub-assemblies to access bolts for replacement of parts that commonly wear out. Sadly the vehicle manufacturers are all about getting the assembly time down to the fastest at the factory, while trading that off for longer labor times once the vehicle has left the factory. I have a couple friends that work as engineers at various vehicle manufacturers - they are constantly pushed by the accountants to make assembly quicker at the factories, since that is where the manufacturer's spend the greatest amount on labor -- as long as the vehicle makes it out of factory warranty coverage then the accountants could honestly care less what the repair costs are for the customer. Strongly recommend people read a book by Bob Lutz (retired Vice Chairman of General Motors) called "Car Guys VS Bean Counters" to better understand how little control the engineers really have in the building of vehicles these days.

@Blazer02LS 6 жыл бұрын

So very true...........

@CubasAutomotive 6 жыл бұрын

That's true modern engineering. I may complain, but who doesn't out of frustration? I will never buy a new car. I love the older pre 90s vehicles, to the 50s, 40s, 20s, but to keep up with flow of traffic or DD, I stick to late 70s to early 90s.

@justingilmore6417 6 жыл бұрын

Being that type of engineer I can tell you that is 100% true. Engineers want to make things easier for people to work on stuff because I myself may be in that predicament. Sadly all anyone companies care about anymore is the bottom line

@gatekeeper65 6 жыл бұрын

It's a big part of the reason the U.S. has become so uncompetitive. Shareholders, and therefore, the bean counters insist on bigger dividends at the cost of innovation and quality. It all comes down to the ultra rich and their greed.

@sharedknowledge6640 6 жыл бұрын

It's still true Ford, FCA, and GM are less interested in repairability compared to say Honda and Acura. The Euro fans out there are unlikely to admit the sad truth is modern European cars are a train wreck of poor engineering that makes this Ford look positively simple to repair. A taillight related failure can leave your fancy new Mercedes stranded and needing to be towed and a headlight assembly in a BMW can throw 20+ codes and cost over $1k to repair. So it's all relative.

@northsouth9079 6 жыл бұрын

Not kidding at all I had 2008 fusion with the same problems today. Had two bad tie rod ends and both front tires had belts broke. Great content as always!

@mrau92me 3 жыл бұрын

Thank you, sir, for this video. There are a couple other videos on the front control arms for this car, but they only showed the right side being done, which of course is the side that doesn't involve the bolt being blocked by the transmission pan. I was able to use my floor jack and two blocks of wood to raise the pan, like you did in this video. Granted, I was very nervous because a good bit of pressure had to be applied to the pan to get it high enough to get the bolt out, plus I have the Mazda 6 which I thought might be enough different to cause a problem lifting on the pan. I was afraid it might crush the pan, so I kept lifting a little bit at a time until I got it out.

@ericcorse 6 жыл бұрын

My favorite kind of video all wrenching and some big Nasty.

@thefordmaniac 6 жыл бұрын

I remember these fusions when they were brand new at the dealer...and doing the basic checks during the brake job, alignment, recall, thermostat, whatever...I always said damn these ball joints are gonna be a PITA. Turned out they don't look too bad

@DefaultAccount100 6 жыл бұрын

I work third shift, Mr. O. Lovin' these late evening uploads!

@NebukedNezzer 6 жыл бұрын

another tire thing. I had an 88 nova(like a corolla). when I would drive faster it would pull harder to one side. The mechanic said tire problem. Swapped front and rear and pull went away. he said if its alignment the pull will not change much but if the tire has a bad belt, etc. it will pull harder at higher speed. worked for me.

@SouthMainAuto 6 жыл бұрын

We call that a radial pull, happens all the time :) Even with new tires!

@MXguy95 6 жыл бұрын

Dang it Eric, Well I wont sleep tonight wondering how it ended now.... Thanks. haha, ( patiently awaiting part 2 )

@jpdronesolutions8646 4 жыл бұрын

I’m a service manager and sales and finance manager for an auto repair shop and car sales lot in Minnesota. With that being said I truly know what the Rust Belt is. I enjoy your content keep it up great job Erik!

@VWWRENCHIE 6 жыл бұрын

When I see tire wear like that AND the customer had NO CLUE...I worry that all the technology that warns us of problems is also making us into drivers that won't be able to think behind the wheel. Auto braking ,lane departure warnings etc etc, as they keep"smartening up" the cars, they" dumb down" the drivers SCARY!

@SouthMainAuto 6 жыл бұрын

I say let natural selection run its course and remove all the safety warnings :)

@jamesberryman751 5 жыл бұрын

@@SouthMainAuto I agree 100%. We now have a crop of drivers coming up that don't even know how to do many simple things because the cars keep saving their asses...until one day they don't, that is...

@pfsantos007 4 жыл бұрын

Actually it started way before all that. It's called an automatic transmission. That's when drivers started learning less and less about their cars.

@frankm5019 Жыл бұрын

When was the last inspection sticker placed on the car? What shop put the last inspection sticker on the car?Ahh end of part ll "1st time at SMA.".

@andresara4711 4 жыл бұрын

Ford taught me a big lesson in life, thank you so much you saved me thousands of dollars plus the stress.

@comingundone27 6 жыл бұрын

Done plenty of these control arms. Easy work. Good video!

@codym4669 5 жыл бұрын

Nick maybe you can give me a few tips? Having issues with ball joints frozen and getting that sub frame lowered.

@pontiakgaSport 6 жыл бұрын

Proof that even a beast like Eric has moments of “wtf do I do now?” This will make me feel better when i stumble across some similar crap at work tomorrow lol. Now onto part two where he’ll make it look easy.

@chkr1610 6 жыл бұрын

Enjoyed the video as always, some chuckles along with sympathy for your frustration. Keep up the great work!

@justinbishop318 2 жыл бұрын

I just bought a 2012 Ford Fusion. Possibly need new ball joints and it has a shimy in the front end under load. I live 3 hours away from South Main, and most likely will take the trip to have him do the work along with a service/ assessment for preventative maintenance. They are hands down the most trustworthy shop I have ever seen. Anyone in the Northeast would be wise to have their vehicle's worked on by them.

@kinqivan7 3 жыл бұрын

Yaassssssssss for that 19.5 socket. Bro literally you are the first person whom I have seen own one of these. I used to use my 19.5 21.5 22.5 when I worked for a dodge dealer. They are amazing!

@attilaelekes5534 6 жыл бұрын

Thanks for all your videos!

@FredLarracuente 5 жыл бұрын

Great video! I was looking at a friends Mazda 6 and the suspension and the engine are almost the same as on my '11 Fusion! Other than the obvious Ford snafus, the car rides very nice and is nothing but extremely reliable. Just a little PITA for us DIYers. When I did the control arms on my Fusion, I lifted the transmission and was able to get the bolt out. My trans mount was sagging quite a bit. Maybe when they are new, the bolt can come out more easily.

@jeremyanthony9300 6 жыл бұрын

excellent video as always Eric. love your channel

@0509kj 6 жыл бұрын

This job beat me up when I did it on my Mazda 6. Fantastic bit of engineering on Ford's part. The bushings on those dual lower ball joints came out exactly the same and had to be pulled off with a puller. Wish I'd had a big nasty for it for sure.

@throttlebottle5906 6 жыл бұрын

they're under $10 each, so easier to toss in new ones in

@miguellopez168 4 жыл бұрын

Gracias amigo muy buenos videos dios lo bendiga por compartir su trabajo y ayudarnos

@76calidude 6 жыл бұрын

I do suspension work on a daily. I've actually had people bring me those Fusions who've had their so called "mechanics" put those in without the sleeves. Then they bring it to my shop complaining about a noise over bumps...😂😂

@jamespatterson9446 3 жыл бұрын

Those lowers definitely can be a pain. I had to heat the knuckle with a torch to get each one out even with a big air hammer. Finally them to come out. But good grief what engineer thought up that design? How does that just come out the air into someone's head lol. Anyways I appreciate you doing videos, it definitely helps on things I sometimes forget about if I haven't seen certain vehicles in a while. So much difference In vehicles and so many different issues it's hard to keep it all in mind. Thanks again. God bless you

@63256325N 6 жыл бұрын

I had a vehicle years ago with all four tires showing steel all the way around, so much steel they'd twinkle in the sunlight. Can't beat a good Michelin. Thanks for the video. Naturally I comment before the end of the video. Gotta say that's one screwy design to say the least, the trans. pan being in the way. Good luck man.

@wyattoneable 6 жыл бұрын

I like your parts counter. Yeah, a good place to walk away. All in all it went well to that point. See you on the next one.

@zainedaddario8911 Жыл бұрын

Man I just was doing a set of these on a friends car and ran into the same issues with the tapper/straight. Was able to torch and hit off the bushing off in my vice was a pain forsure nice video man glad I wasn’t the only person confused

@alexandriabowe 6 жыл бұрын

Eric I worked on two of these didn't know that collar comes off, thanks for teaching

@lamontsmalls6086 4 жыл бұрын

this guy's cool! And makes working on cars look easy

@isaiahwelch8066 5 жыл бұрын

Eric: I would recommend a change of penetrating oil. I would begin using a product called Freeze-Loc or Freeze-Off. It's available at local parts store, and it's basically liquid nitrogen in a can. Awesome for breaking apart rusted parts, because it breaks rust and corrosion at the molecular level. I started using Freeze-Loc in 2011 while rebuilding the engine in my Ranger. And I used it to take off the harmonic balancer without air tools.

@skokie23 6 жыл бұрын

AHHHHH!!! PART 2!!!! Great vid Mr O!! Please keep them coming!!!

@zerofriends5592 5 жыл бұрын

I enjoy watching your videos Mr South Main.

@baxrok2. 6 жыл бұрын

Yup, same on the Mazda 6's. No fun working DIY on the ground with these. Thanks!

@DanKfilmmaker 6 жыл бұрын

Thanks Eric O. Great video!

@georgebrandt6247 6 жыл бұрын

That impact is a beast

@dB_944 6 жыл бұрын

That's the bolt for the "lifetime" suspension, which just happens to be trapped by the trans with "lifetime" fluid! Ironic!!

@KCautodoctor 6 жыл бұрын

It made it past the factory warranty - that is all the vehicle manufacturer's accountants are worried about. It also goes to show how effective the vehicle manufacturer's marketing people have been into getting people to believe vehicles are disposable & if it ever needs repairing you should just go buy a new vehicle.

@pudermcgavin4462 4 жыл бұрын

Just gotta to drop the cradle ever so slightly now the cups attached the the ball joints they are freaking bastards

@richardcranium5839 6 жыл бұрын

i've seen some of those bushings with the holes offset to enable alignment

@joelaplnski5394 6 жыл бұрын

Good, Good stuff Eric, no kidding. I feel a little guilty, I’m at work and I can’t stop watching this vid. We’ll gots to get back to work, I’ll look at part 2 on break!

@databeestje 5 жыл бұрын

Thank you so much for this video! My car has a case of the weeble wobble at about 10mph and I checked the rim rotation with a micro meter which was in spec, no play in the arm or knuckles and it had me baffled. Just like you say, it goes away above 40mph and I've been driving it for about a year that way now. It does indeed feel like a tire compressing on a single spot, I just don't know which one. At something like 60mph there is a slight returning low frequency hum which is a telltale signal that a wheel is off. So, yeah, I'll check in for a alignment and see if one of the relatively new (2 year old) tires is at fault here.

@chickmagpunk 6 жыл бұрын

Mr.O at it again! Thanks for the video good sir

@hunterlinville423 4 жыл бұрын

I feel your pain working on this Ford. I replaced spark plugs and wires on Ford Five Hundred. It was a much bigger pain than it needed to be

@mrkttrdr2919 6 жыл бұрын

I luv the sound of big nasty in the evening

@tofadeisastart 6 жыл бұрын

Yes. Finally a hanging and banging video!

@sharonmullins1957 2 жыл бұрын

Came here to understand tie rods (just had replaced - 2009 fusion), stayed for the humor. SO funny!

@stephenlawrence4362 6 жыл бұрын

More work to get to the parts that need to be worked on. Thank you Ford

@Korrupted8787 6 жыл бұрын

Curious to see how you do alignments, I've only been doing them for a year now using a Hunter rack. Could always use some tips and tricks!

@SouthMainAuto 6 жыл бұрын

Stay tuned for part III

@keithwelton 6 жыл бұрын

Another nice vlog Eric O. We've had Mrs O wielding the spanners how about a video with Eric O in the kitchen preparing lunch?

@brandonlink6568 4 жыл бұрын

I usually get the high speed shimmy that starts around 50, stops between 65 and 70, then starts again above 70. Out of balance tires sometimes have a sweet spot.

@OGZeroLyfe 6 жыл бұрын

Hyundai engineers "We just put the caliper bracket bolts behind the control arm mount".... Ford engineers "Hold my beer"

@SouthMainAuto 6 жыл бұрын

Now that's funny right there lmao

@greggfidler4764 6 жыл бұрын

Well at least Hyundai fixed it on the 16 Elantra

@for2utube 6 жыл бұрын

ZeroLyfe The finest 12-pack engineering, as they say.

@0509kj 6 жыл бұрын

You win

@Jonathan11225 6 жыл бұрын

hahahha Kia also

@jackpatteeuw9244 6 жыл бұрын

The front suspension on that vintage Fusion is from a Mazda 6. I have done a couple of lower arm/ball joints on Fusion/Milan and the bushing ALWAYS pulled out.

@mnpyton 6 жыл бұрын

Do a little review on those Harbor Freight impacts

@papahoe6718 6 жыл бұрын

Just good folks👍 THANKS S.M.A🇺🇸

@aaronb845 6 жыл бұрын

WHAT?! No video on the Milano subframe replacement? That would be scary to watch. Worthy of two bags of popcorn.

@SouthMainAuto 6 жыл бұрын

Bahh, gravy job. in and out in a few hours

@joeg.2354 6 жыл бұрын

oh thank god you put up a video. i was bored beyond words tonight

@dB_944 6 жыл бұрын

The whole car was designed around that one bolt!!!!

@Blazer02LS 6 жыл бұрын

Not far off on some models...

@SlipFitGarage 6 жыл бұрын

David Browning Yes, that bolt was the very first part set onto the assembly line. The entire car was built around that bolt. On other makes and models it's typically the heater core that is the first part on the assembly line. Lololol

@jamesberryman751 5 жыл бұрын

@@SlipFitGarage kinda like a Northstar or Tundra V8, which were both built around the starter lol

@SlipFitGarage 5 жыл бұрын

@@jamesberryman751 Exactly! On a side note, I had a Northstar Cadillac many years ago. Luckily I got rid of that car before the head gaskets shit the bed. Lolol.

@cassyl460 3 жыл бұрын

Fun fact: at our dealership, when we go to quote out one of the front control arms they are described as "The Straight one or the Squiggly one"

@idrisazizi7651 6 жыл бұрын

Napa’s premium line is manufacture by Mevotech. So should last as long as MOOG.

@joelopez40oz23 6 жыл бұрын

7:52 back in the early days of me turning wrenches i did the classic reach around on a Ford exhaust pipe. Sent me to the emergency room to get 4 stitches. Sometimes you have to learn the hard way i guess.

@SouthMainAuto 6 жыл бұрын

I only mention it because I too learned the hard way....

@hewgull 6 жыл бұрын

All of the NCP (NAPA Chassis) Line is now made by Mevotech.

@jeffscomp 6 жыл бұрын

Brad mevotech is awesome I think.

@hewgull 6 жыл бұрын

I've had good luck with Mevotech. The previous NCP line was made by DANA. It was great as well.

@marv.mon.9845 4 жыл бұрын

I found out too that the bushingvcomes off. Had a hell of a time removing it! 07' mercury milan

@pfsantos007 4 жыл бұрын

I had no idea what the Chrome capped nuts were all about. Couldn't believe it when I found out this was actually done. Replaced all nuts with mcgard solid Chrome lug nuts. Couldn't stand that removing the wheel was the hardest part of most jobs. No more. Did the same on sister's car.

@grimsbycleethorpesdashcam 4 жыл бұрын

19:14 taking that sleeve off, use the ball joint splitter to put some pressure on it then give it a lil hit with an air hammer and it should pop off easy. also tapping with a hammer can work if thats all you have

@famusman5989 4 жыл бұрын

I seriously love it when u say win this war. Because it's so true dude it really is a war sometimes

@navajorezathlete1202 11 ай бұрын

Makes me thankful I live in AZ where my car never rusts or becomes corroded. But even then I had to beat the shit out of the end of the cv axle when I was removing it.

@jkunderwood3291 6 жыл бұрын

Woohoo. Been waiting on this since you teased it last night.

@jkunderwood3291 6 жыл бұрын

If you read this. I think your outdoors channel would be the perfect home for your Jeep build.

@ellobo8593 6 жыл бұрын

Justin Underwood, that comment needs a heart and pin

@SouthMainAuto 6 жыл бұрын

We will see when the time comes.

@jkunderwood3291 6 жыл бұрын

South Main Auto Repair well I hope it gets recorded. Love seeing how work is supposed to be done. If I can convince my wife to come to New York I’ll be sure to come get a service done!

@SouthMainAuto 6 жыл бұрын

Or just swing in man!

@johnbartlett5724 6 жыл бұрын

hey eric use your noodle take your pipe stand place it on something solid on the motor and let the car down motor mounts will move enough to let bolt out

@76calidude 6 жыл бұрын

John Bartlett exactly what I do...or have done. Tripod and chock of wood works like a charm

@orfeous 6 жыл бұрын

Yep

@williamedwards3546 4 жыл бұрын

PB blaster lubricant for the win 😁😁👍🏾👍🏾

@colintrout1095 6 жыл бұрын

I am seeing alot more of habor freight cordless impacts and impact sockets,In professional shops and delaerships

@andrewbabich5138 2 жыл бұрын

Do I need to disconnect the steering shaft at the foot well and secure the wheel when lowering the subframe for the rearward control arm? A TRQ video shows them do disconnecting the steering and exhaust but would love to avoid it if I can. Loooooove these SMA videos, entertaining humor and super educational. I couldn't find a big nasty but got a chief air hammer from harbor freight and it drove my ball joints for the most satisfaction I've ever felt in my life.

@gd5128 2 жыл бұрын

lol

@bigmac965 6 жыл бұрын

I'm scared, Mr. O, but get that bushing puller and give her the beans!

@jeffryblackmon4846 6 жыл бұрын

iIt is time for a grinder to adjust the clearance on that interfering part.

@SouthMainAuto 6 жыл бұрын

Might leak a little trans fluid if I do that :)

@elcheapo5302 6 жыл бұрын

You weren't kidding about the cliffhanger! Cant wait for part 2!

@bobdavis2554 2 жыл бұрын

Hey, appreciate the video really gave me a good place to start from with having to drop the sub frame. A question o have is the Haynes says to disconnect the steering and lock the steering wheel in place, I assume you didn't do that, did you have any issues on the backend with the way you dropped the sub frame?

@fordnut4914 4 жыл бұрын

That bushing comes off I just did one of these lol.i looked at it dumb founded too.

@randym119 4 жыл бұрын

I was working my girlfriend's rusty Mazda 6 this weekend and cursing Ford the whole time. My favorite part of this wretched platform is having to run an extension through the rear trailing arm to access the rear caliper bolt.

@zoltank.9757 6 жыл бұрын

I can’t wait to see the next part. Are you gonna do the other side too once you are done with this?

@SouthMainAuto 6 жыл бұрын

Nope just the side that is loose.

@2eagle86 4 жыл бұрын

I just did my lower ball joints, didnt have to loosen the cv shaft bolt

@joehyundaitech7961 6 жыл бұрын

I love the Idea the new invention of the straw they should have come out with it a long time ago. but I like there newest invention even better the new straw the metal one that you can bend around

@billbeckett1021 6 жыл бұрын

What kind of parts did you use on the Mercury? Did they come with new bushings?

@haywardsautomotive6156 6 жыл бұрын

Every time I break out the extra long breaker bar or ratchets I know it could go bad fast & hope a few hundred thousand bolt removals will keep me out of trouble. If engineers had to work on what they design they'd find out their design has a few flaws.

@GotWire 6 жыл бұрын

Greate video I hate when you get jobs like that where you taking everything off but the bad part just to get to it haha

@supergrendel 2 жыл бұрын

Were there some bolts behind those plastic splash guards that you had to release in order to get the sub frame loose? In the video you just had a couple vertical bolts that you released and then went straight to those splash guards.

@JVerschueren 6 жыл бұрын

About 10 years ago, I damaged my right rear tire on a traffic island at an unfamiliar junction, which damaged the carcass and the wobble was only noticeable at very low speed. The more pressing thing for me at the time was an inbalance in the right front tyre, which my dealer was unable to get rid off. Fortunately, my car still came with an actual spare, so I slapped that on and went to the tyre centre the next Monday, where the tech showed me the problem with the right rear and demonstrated it would blow at just 0.3bar above the nominal inflation pressure. Kind of unsettling, seeing as I drove home at about 95mph the night before.

@mrau92me 3 жыл бұрын

I'm in the middle of doing the front lower forward control arm on the driver's side of my '09 Fusion. I'm currently stuck on removing the bolt that is blocked by the transmission pan. Do you think it could have been removed while the sub-frame was dropped to remove the inboard bolt for the other (rearward) lower control arm? I'm also considering draining and dropping the transmission oil pan. It's been a bit since I changed the AT fluid.

@papahoe6718 6 жыл бұрын

HELLO FROM FLORIDA THANKS 1..2..BBQ👍👍😎

@crcdesign9886 6 жыл бұрын

I'm sure you already know but those inserts that are around the ball joint stud come off the end that goes into the knuckle. common on bmws..

@717Lucero 6 жыл бұрын

Good old Ford happy caps on the lugs I deal with that everyday

@vector6977 4 жыл бұрын

Love those single use lug nuts!

@alberth8073 6 жыл бұрын

I'm not super suprised. Got a driveway full of Fords and run into funky bolt issues like this with some regularity. Usually its the upper control arms that have at least one chinese finger puzzle bolt to fish out around brake and fuel lines or shock towers.

@timpayne6444 6 жыл бұрын

Eric something up with your shop air? seems like alot of cordless powered tools lately. ive actually started using alot more cordless stuff to keep down on the noise...

@SouthMainAuto 6 жыл бұрын

Air is all good, just seeing how these HF tools hold up in a real shop day to day use...