Forging hardy tools using an anvil block

Forging hardy tools using an anvil block - blacksmith tools

Рет қаралды 29,335

6 жыл бұрын

I picked up an anvil block from Bob Menard at Ball and Chain Forge. This tool is used to form the shoulders on hardy tools during forging. While we will look at a couple of hardy tools in the video, this is more about the block than a tutorial on the tools I am making.
You may contact Ball and Chain Forge at
www.ballandchainforge.com/tool...
The Salt Fork Craftsman swage block is available at
www.saltforkcraftsmen.org/swag...
Thank you for watching. Black Bear Forge is a small one person shop located in Southern Colorado.
If you would like to take a more active role in the production of these videos, you may provide financial support through one of the two links below.
www.paypal.me/BlackBearForge
Or you may set up a monthly contribution through Patreon
/ blackbearforge
I have set up a Facebook group just for my KZfaq channel.
If you would like to share your work that was inspired by my videos
This is the place to do that
/ 101400907400310
Find my shop on line at:
www.blackbearforge.com
www.blackbearforge.etsy.com
/ blackbearforge
/ black-bear-forge-20986...
The following list provides just a few resources to help you find supplies and equipment for blacksmithing.
www.piehtoolco.com/
www.centaurforge.com/
www.blacksmithsdepot.com/
www.blacksmithbolt.com/
www.oldworldanvils.com/
www.nimbaanvils.com/
fontaninianvilandtool.com/
www.abana.org/
www.mcmaster.com
kensironstore.com/
Blacksmithing and related activities can be hazardous. These videos are not a substitute for competent professional instruction. Your safety is your sole responsibility. Always use appropriate safety equipment including eye and ear protection when working in the shop. Follow manufactures safety guidelines for the use of all equipment. In the event something shown in one of these videos seems unsafe, it is up to you to make the appropriate changes to protect yourself.

Пікірлер: 66

@JF-fx2qv 6 жыл бұрын

I'd enjoy every level of blacksmithing videos. From greenhorn to expert. Hand forged to power. From useful items made (esp. tools) to whatever you are passionate about creating.... makes for the best blacksmithing videos. I enjoy when others have ideas, and useful shared tips & tricks.

@5x535 6 жыл бұрын

I do too Joseph---all levels! I never fail to learn something when watching John. It was really fun to watch him work the 14lb-der. Swinging a big hammer is something that I really enjoy. Bought a beautiful 20 not long ago. It really does get the attention of a piece of hot iron.

@larryking606 5 жыл бұрын

John , Thanks for the information , as always , I can say , I do learn something good everyday ! You need to write a Book ! You have stock piled years of useful information ! Have a Blessed Day ! Keep Hammering !

@ChristCenteredIronworks 6 жыл бұрын

Hey John Really enjoyed this one getting to see the use of that power hammer especially :-) thanks for the video God bless

@BlackBearForge 6 жыл бұрын

Thanks. Its not a bad hammer, but it doesn't have the precise control of a self contained.

@willlothridge3197 6 жыл бұрын

Totally off topic of this video. I purchased a post vise this week and the spring needs rearched

@BlackBearForge 6 жыл бұрын

just heat it and bend it to shape. Post vise springs generally aren't hardened. It doesn't need much bend, just enough to push it open.

@willlothridge3197 6 жыл бұрын

Thank you

@lelandstone35 3 жыл бұрын

Holy Hannah, my sciatica flared up just WATCHING you swing that 14# sledge! :-) Thanks for another informative video!

@rjordans 5 жыл бұрын

These anvil blocks (the version you put in the hardy hole) also work a charm when forge welding. Draws a lot less heat out of your work piece and gives you a bit more time for working.

@3870TheDad 6 жыл бұрын

Another great video John, thanks.

@bentoombs 6 жыл бұрын

When I made my Brian Brazil style hot cut Hardy I used my Anvil and maybe I shouldn't have. thanks for the info John. I'm in the works to acquire a big swage block like that. 🔨on!!

@johndilsaver8409 6 жыл бұрын

I contacted ball and chain forge and purchased one of the anvil blocks like you have in this video. I haven't had any time with it -- it just arrived, so other than saying it looks great and was packaged extremely well, I can't give a more full review yet. Really looking forward to using it. Thanks for introducing it.

@jimhumphrey 6 жыл бұрын

Excellent! Enjoyed every minute.

@peterelliott2232 6 жыл бұрын

John, these upsetting blacks work great. Bob of Ball and Chain, is an officer of the he NEBA and he and his wife work tirelessly to support the group. They have other products available as well. Incidentally, he like yourself is a 10 7 firefighter out of Portland FD. Small world moment. Thanks for a good presentation. Peter

@bobwhelk2117 3 жыл бұрын

You tutorials are invaluable and I appreciate you sharing. Sorry for getting mushy but thought I’d get this off my chest. Whew- I said it. 🤣

@shadowcastre 6 жыл бұрын

I can see an anvil block being a quite useful tool! For anvil use I think I would modify the chains and use small chain binders for quick assembly and disassembly. Thanks for the video..

@a.marcelhernandezgonzalez8028 6 жыл бұрын

thank you very much for your videos we are very helpful for me that I am starting with this great trade greetings from Mexico.

@BlackBearForge 6 жыл бұрын

You are welcome

@johnjude2685 5 жыл бұрын

Thanks looks good...I would try a lock washer and second but it might hold that chain. Another good video. Thanks again Sir

@VintageWoodWorkshop 6 жыл бұрын

Great info, thanks!

@MauledByBears 6 жыл бұрын

Bob is a great guy! And he's one of the closest guild-connected smiths to me. I've emailed him with a couple of questions relating to blacksmithing in New England and he's a great resource.

@loul7239 6 жыл бұрын

MauledByBears are you an NEB member? Members get discounts on the NEB castings...including on that anvil block. The yearly dues would be payed for in savings on the block, the swage block and the mandrel.

@MauledByBears 6 жыл бұрын

Lou L Not yet, but as soon as I have the money for membership and some castings, I'm taking a trip to Portland!

@loul7239 6 жыл бұрын

MauledByBears the treasurer is in CT...but Bob is an officer. Check the NEB website for Karen Sims’ email. She is in charge of dues. Membership is $30 per year...well worth it. It forces you to get out and meet up with others. The learning curve improves dramatically then! Hope to see you at a meet soon. This June we are doing a tong making hammer-in at our learning center in Maine. Getting ready for hosting the national Abana meet.

@paulmorrey733 3 жыл бұрын

Thanks

@prestonklima7756 6 жыл бұрын

I have a block like this but with one Hardy hole. I've had it since before I got my first true anvil and was still dealing with ASO's. I always just called it my Hardy block.

@MarkDavisCFM 6 жыл бұрын

John, If I were in Colorado I'd be honored to be your striker!

@grandadz_forge 6 жыл бұрын

Love that power hammer. If I can keep my fingers out. Lol

@jarrodfillmore6247 2 жыл бұрын

John! Just a thought. Make a stake or two thats flat on the top but will fit the anvil block through to the swage block to lock it into place. One for each size

@currajeperm8418 4 жыл бұрын

Super maestro of albania thankes

@jimlopez1169 6 жыл бұрын

call it a swanvil

@draconusspiritus1037 6 жыл бұрын

You could make a bracket to hold it steady on your anvil using some angle iron like maybe from an old scrap bed frame rail that could slot into the hardy hole or pritchet(?) hole either or both

@jamesmcmillen4828 6 жыл бұрын

If I ever find myself in Colorado, I'll have to drop by and strike for you.

@user-gi3de6yq7o 3 жыл бұрын

Посмотрел на ваше оборудование на котором вы делаете прекрасные вещи и инструменты вызывает у меня восхищение восторг и уважение . Снимаю шляпу

@motome8 6 жыл бұрын

I’d love to come down for a day and help you out and absorb your knowledge. I am only about 2 hour drive. :)

@mattwyeth3156 Жыл бұрын

I'm wondering if it's more a cross between a striking anvil and a swage block

@lenblacksmith8559 6 жыл бұрын

Like this, a swage would be good, have no where to put it and don't have resources to make one, maybe one day.

@BlackBearForge 6 жыл бұрын

I have tools today that I never dreamed I would have 20 years ago. So keep your eyes open

@lenblacksmith8559 6 жыл бұрын

Yeah that's a good point John, i am slowly building up my tools.

@jalanham1 6 жыл бұрын

How long are your striking sledge handles?

@Andy-Gibb 3 жыл бұрын

👍🏻👍🏻👍🏻👍🏻

@WildBoreWoodWind 6 жыл бұрын

John, the 'anvil block' is more of a big bolster - when using it on the swage block, could you not put a bar of the appropriate size, through the anvil block and the swage and that would stop the anvil block twisting about?

@BlackBearForge 6 жыл бұрын

There are lots of options. But I think I will be making a stand for the smaller swage blocks and the anvil block so they are all well secured.

@truegeekified 6 жыл бұрын

John, the black hose behind your power hammer worries me. It seems very tight at the coupling. It got to really resonating the longer you ran the power hammer. You may need to look into a longer hose and some steel braided stress relief hose for the connections to the power hammer.

@BlackBearForge 6 жыл бұрын

That is just an exhaust hose going through the wall. it originally just hung free in the back. So it isn't critical and certainly not worth the investment in braided hose.

@truegeekified 6 жыл бұрын

Black Bear Forge Ah ok. That makes perfect sense. After I submitted that comment, I was like, No, John would not let a pressure line get that tight... Should have known my instincts were correct.

@fireeyeforge8267 6 жыл бұрын

I may have missed you saying anything about it, but is the block a hardened object? Is there any worry about damaging the face of the anvil when using it? Love your videos!

@BlackBearForge 6 жыл бұрын

Tools of this sort are typically cast from ductile iron and not hardened. So there shouldn't be an issue. If you are thinking of buying one I would consult Bob to get the answer.

@fireeyeforge8267 6 жыл бұрын

Thank you for the reply!

@danielmoss2089 6 жыл бұрын

Hay John hope your well? I really like your sledge hammer. What would you say if I sent you a sledge hammer that I forged?

@BlackBearForge 6 жыл бұрын

That would be awesome.

@BlackBearForge 6 жыл бұрын

The larger hammer is an old 14 pounder. When i moved to the swage block I was using a smaller 8 pound hammer.

@bc65925 6 жыл бұрын

I think I have an idea for your swage block to hold that anvil block from dancing around. I'll put together a simple drawing and email ya.

@BlackBearForge 6 жыл бұрын

Got it, thanks

@CockatoobirdmanBill 6 жыл бұрын

why did you use the power hammer and not the press

@BlackBearForge 6 жыл бұрын

No particular reason

@donstephenson9474 6 жыл бұрын

John, My 14 pounder is a straight peen like your 8 lb. I'm a little older than you but you're not a young guy either and we both know that swinging a 14 lb. hammer will whoop your butt, no matter what your age! Liked watching you work.

@BlackBearForge 6 жыл бұрын

What you saw in the video is about my limit for a big hammer.

@donstephenson9474 6 жыл бұрын

I weigh about 140 lbs. and that's about all I could do too, if that. I may be old and little but I'm tougher than a $2 steak. :-D