FREE OXYGEN FOR WELDING USING A MEDICAL MACHINE oxy acetylene gas bottle same kit gauges torch hoses

No video

FREE OXYGEN FOR WELDING USING A MEDICAL MACHINE oxy acetylene gas bottle same kit gauges torch hoses

Рет қаралды 2,676

Күн бұрын

FREE OXYGEN FOR GAS WELDING. Medical Oxygen machine supplies free oxygen.
Weld with Propane and Oxygen, rather than oxy acetylene. Propane gas is easy to get hold of and burns really hot, it is a very similar gas to acetylene.
You can usually find a used set of gas welding gear from around £30 to get you started.
Propane is available at most fuel stations or hardware stores.
The mini gas welding bottles are a cheap and convenient alternative.
Paid links:
Oxygen Concentrator: amzn.to/3sQUve5
mapp gas torch kit : amzn.to/3DrIvSn
acetylene adapter: amzn.to/3O22mwm
mini gas welding kit: amzn.to/3Oy7c61
mini gas welding bottles: amzn.to/3OyM6o4
oxy acetylene welding torch: amzn.to/47cz1rZ
oxy acetylene welding kit: amzn.to/3rInMXL
As an Amazon Associate, I may earn from qualifying purchases
Channel Support:
With the current cost of living crisis we all know how important is is to save money where we can.
My mission is share my knowledge to help and support you to make some real cost saves if possible.
www.buymeacoff...

Пікірлер: 13

@johngranata5515 2 ай бұрын

Now all you're lacking is an acetylene generator ...

@fredsasse9973 11 ай бұрын

All of the medical oxygen concentrators I've seen for home use (which is what you show in the video) also sell a compressor kit to use with the concentrator to allow users to refill their portable oxygen cylinders at home. One thing though, it is not "free". O2 concentrators pull as much power as a refrigerator running 24/7.

@andyfireblades 11 ай бұрын

thanks for the info. that would be good , to be able to refill as well. i will look into that. yes you have got the electric to pay for. nothing is free, except for sunlight

@i-love-comountains3850 11 ай бұрын

@@andyfireblades solarr panels cost money, setup costs your time. still, i love the ingenuity! another way to get liquid air is acetone and dry ice🎉

@paulmuff9883 2 ай бұрын

Hi , love the video how many Lt per minute does your machine give out, and what’s the least you would recommend? Manny thanks. Paul 👍👍

@andyfireblades 2 ай бұрын

5l and it does light welding. you want at least that, i wouldnt get a small machine cheers andy

@giacomoorru3420 10 ай бұрын

Fino a che spessore puoi saldare? Riesce a gestire un cannello grande? Poi con il gas gpl va bene?

@andyfireblades 10 ай бұрын

not very thick. i havent tried lpg gas

@giacomoorru3420 10 ай бұрын

@@andyfirebladesma non bisogna avere 4 bar di pressione dell' ossigeno per saldare? Questo generatore di ossigeno produce solo 1 bar

@andyfireblades 10 ай бұрын

@@giacomoorru3420 this is ok for small work only

@stanweaver6116 11 ай бұрын

If you are cutting with it it certainly won’t work.

@andyfireblades 11 ай бұрын

yes, there wouldnt be enough flow rate cheers andy

@paradiselost9946 11 ай бұрын

@@andyfireblades not just flow rate but purity. i would have to dig for the chart, but iirc, a drop of 1%, from 99 to 98% doubles the time to make a cut. dropping to 95% makes it almost unworkable. too much nitrogen and nonreactives in the way.