From No Engine to (Almost) Running in FIVE Days

From No Engine to (Almost) Running in FIVE Days | M60 Swapped e30!

Рет қаралды 18,639

3 жыл бұрын

So, you might have already seen Hamish's M60 swapped e30 run and drive in a previous video, but here is more of what led up to that. This is the first car Hamish has ever built and you can see the stress of the deadline getting to him as time wound down. Give this guy some love in the comments for his awesome slicktop e30. He worked his ass off and the end result was epic.
Merch? Merch.
dbo.storenvy.com/
Follow The Team On Instagram!
@DenverBeerAndOil
@DBOChris
@Mile_High_Euros
@LounsberryFab
@HamDoesThing
Music:
Easy by Ron Gelinas Chillout Lounge | / atmospheric-music-portal
Music promoted by www.free-stock-music.com
Creative Commons Attribution 3.0 Unported License
creativecommons.org/licenses/...

Пікірлер: 37

@youngdust6730 2 жыл бұрын

FYI to all you m60 swappers who consider swapping, you cant get the engine in from the top with the trans on, the bell housing hits the tunnel and the oil pan gets stuck on the front core support so you have to remove the oil pan or do it like he did. On my m60 swap, I ran the e34 540 stock brake booster setup with custom welded bracketry for the best "stock" brake feel. (cheaper too)

@REALSHYT666 3 жыл бұрын

Hamish worked his ass off on this E30 M60/62 swap. He put in the work & made a Monster 👹 of a BMW Congrats Bromigo. that was a pretty good cigar Louis came in clutch with that 👌.

@DENVERBEERANDOIL 3 жыл бұрын

Thank you for all your help man! Seriously appreciate it!

@paulpateman6723 3 жыл бұрын

This channel is the bomb 💣 love the content BMW’S are the ultimate driving machine like the way you have fun to 👍👍🇬🇧🇬🇧

@tedschultz365 3 жыл бұрын

fun to watch this progress... i think all true car guys have been there through the struggle. Its how you learn. Looking forward to getting my caged e30 on the road and maybe it will meet your m60 318is (rumor has it the m42 car out of your car, ill have to check if it has a vin stamp)

@kinetickiwi9032 3 жыл бұрын

You've come such a long way from harassing the birds at the parrot place... And by birds, I mean parrots

@whiskeyactual. Ай бұрын

I'm interested in you guys brake plumbing/booster setup, as I noticed you are not using a retrofitted e34 booster setup.

@physicsofdemolition 28 күн бұрын

I went for the wilwood manual setup! A pain to setup but works quite well, just an adjustment

@illegalworks892 Жыл бұрын

How u show me how u comnected starter cables to wiring or chassis?

@lancecowen3604 3 жыл бұрын

Awesome build brother type are inspiring to get my swap done! You’re killing it.. impressed. What is the easiest way to go about the wiring and also what computer? Did you use a kit?

@DENVERBEERANDOIL 3 жыл бұрын

Thank you man! I went pretty head first into the wiring, e34 manual harness, I looked up a bunch of wiring diagrams and threw it together, really surprised it worked as well as it did haha! That being said finding any diagram and making sure to use the pinouts instead of the wire color is the way to go! We're sponsored by Sssquid tuning, Sssquid.com. Jay from over there has been super helpful, sends you the correct dme, you just have to provide what you'd like in the tune and he'll make it happen, ews delete if it applies etc, etc

@dominiclostaglia4300 3 жыл бұрын

You know how long I've wondered about those damn GTR's. Finally got my answer as to why they have never moved. 🤣

@DENVERBEERANDOIL 3 жыл бұрын

GTR content coming soon. Chris is finally getting off his ass and doing something with them.

@dominiclostaglia4300 3 жыл бұрын

@@DENVERBEERANDOIL you know me. I'll be patiently waiting...

@luciaramirez3849 2 жыл бұрын

Hello I still continue with my problem in his video I see that he also does not have it on, why was it? my swap did not part you used the original computer thanks

@vezebuhlepaul8409 Жыл бұрын

Which engine mountain did you use?

@physicsofdemolition 28 күн бұрын

Used stock m60, but just switched to garagistics poly mounts now that they’re available on their eebsite

@victoryem6066 3 жыл бұрын

Hello, what did you do for your driveshaft?

@DENVERBEERANDOIL 3 жыл бұрын

I used the front section from a manual e39 540 and the rear section from this 318is, had to get it shortened if I remember correctly

@victoryem6066 3 жыл бұрын

@@DENVERBEERANDOIL okay nice thank you for the quick response. And did the front section of the E39 driveshaft connect to the rear section of the E30? Also by how much did you shorten the driveshaft if you can remember. Thanks

@jaimepulidom.5665 3 жыл бұрын

Hello brother I hope you are well greetings from Chile, I am in a swap identical to yours, I have a problem that it does not start, reviewing the diagrams I find that it has an immobilizer relay, the M60 has an immobilizer ??. why didn't you turn it on, could you help me thank you. 👍👍👍

@DENVERBEERANDOIL 3 жыл бұрын

With this swap I didn't have to mess with any immobilizer, could be a market difference between the countries, sorry

@TheGangstaman777 3 жыл бұрын

When super ETA stroker?

@DENVERBEERANDOIL 3 жыл бұрын

Engine was completed and installed. All videos have been published for it.

@boogiewoogie3175 3 жыл бұрын

Is it possible to do a m60 swap on an e34 m20?

@DENVERBEERANDOIL 3 жыл бұрын

Yes. For sure.

@boogiewoogie3175 3 жыл бұрын

@@DENVERBEERANDOIL Great! By far you’re the first guy that ever said to me that its possible to do so. I have an e34 with an m20b20 motor in it. Never really like em. I have my uncle’s e32 (m60b30) with an auto tranny and I’m looking forward to swap em out. By the way I enjoyed watching your videos keep em coming dude peace

@DENVERBEERANDOIL 3 жыл бұрын

It's really not all that big of a deal you just need a donor car to get all the parts off of it it will be labor intensive for sure but it's definitely possible

@nicholasangeletos762 3 жыл бұрын

e34 came out with m60s in them so its not a big struggle to do it :)

@X3R0D3D Жыл бұрын

@@nicholasangeletos762 i have an e34 with an m60, its canadian market but its stock.