Had my radio a while, but I'm rubbish with programming, but I learned stuff today. Looking forward to the future videos on the Taranis.

Thanks Andrew, very interesting to see a comparison of telemetry and setup, between the Taranis, and the brand that I fly.

The Taranis is a great radio I think I just got a bad one with poor range I returned it when I probably should of had them send me a replacement . That was when they first came on the market . Now they have many really cool features for the price . Great video Andrew .

Thanks for the video Andrew. You have taught me more about Taranis than any other channel. I always search your videos for my problems before I go anywhere else.

Hi Andrew, with you you always learn new things, you're a good teacher, thank you for existing. Merry Christmas to you and your whole family, a greeting from a faithful friend from Switzerland Carlo 😉

Very Useful and still current. Thank you Sir

Just got a new Taranis frsky radio last week.I'm a current spektrum user,so the learning curve seems a little steep.Thank-you for posting these videos,they are so much easier to follow than manuals.Lookig forward to learning about this Tx.

Thx !! EXCELLENT !!! Great balance between leading by handing and getting to the point. Packed with good settings

Very informative Andrew

Thanks for this and all your other videos Andrew. I have been trying to get FLVS-01 to work with my D8R- II Plus telemetry r/x for a while (I have 4 of them). The video link that you gave to Anton Neeshpapa may be just what I needed. I have used them with a 9XR Pro without telemetry. I have ordered a Taranis Q X7, hence my watching your videos of same. I have previously set up telemetry on a Fly Sky FSi6 which I found relatively simple to do and I have it showing t/x, r/x internal and flight pack voltages + altimeter and vario for my gliders. Again a lot of this was with help via your videos. When my Taranis arrives I hope to put Ersky9x onto it as that is what I am used to using. A video of this conversion would be great. Keep up the good work. Your videos are always interesting and easy to understand. Thanks again.

I'm learning a lot, thank you. Merry Christmas

Loving this Andrew. Answering so many questions. Please keep this going. This is also great fun. Now i can get my Taranis to work correctly. One thing I can't do is the arm, dis-arm, the electric motor, onto a switch, so that one setting covers all present and future added models. Thank you so much Andrew. Keith.

another great series :-)

Really useful Andrew, Merry Christmas :)

Great tips! Thanks Andrew - just bought the vario for my glider!

Excellent

Thanks... I'm begginer. I undestand everthing... Great video.

This is cool and comparable to DJI's "Find my model" but the gps sensor with logging is the sure thing in my opinion for my situation. This is good to know.

Very good video Andrew as ever! Wish I had seen this the forst time I set up telemetry! - you showed me a few extra features there I was not aware of and now added - thanks! One question though is I see you have SWR as a sensor input (on the view of your 9XD Display) - how did you get that as all I have read so far says the latest version of Open Tx (2.2.0 I think) did away with SWR and all you have now is RSSI unless you look in Analogs for RAS (not something you can see easily) so I'd be most interested to know how you get it please?

Grazie.

Great stuff, Andrew! Do the double male connectors used to gang the sensors come with them? If not, where do you get them? Thanks for your time.

Great information as always!!! Do you have a sensor you prefer to use more than others?

Both the OLED screens on my 2014 era Lipo Voltage Sensor and Servo Channel Changer don't work anymore. The Lipo Voltage Sensor still functions via the Smart Port. The Channel Changer is a bit to hard without a screen.

great tutorial, congratulations. Are you going to do a Lua tutorial for the Taranis? Thanks greetings

Very interesting I'm just getting back into this hobby after a 20 year break. Wow amazing. Only thing im really waiting to find out is if there is a pitot tube sensor for real time air speed, to reduce stall, receive low air speed warnings. Be more handy than gps ground speed

Nice video. Thanks to you I got GPS and voltage sensor in my RC plain. Do you know what to do in case of loss of signal the plain come back to the origin point?

Very good your video. I have a question to you: The reciber X8R only read sensor FRsky, or read anything sensor to connect at the fly board ?

Hi Andrew If the current sensor can display the pack voltage, what is the point of the Lipo voltage sensor?

Thanks for the awesome video. Are these sensors also work on S6R Receiver?

Andrew could you please make a video on how to do waypoints on the air3 inav board

Do you have to plug in and discover each feedback module individually one at a time or can you just daisy chain everything together how you wish to have it set up and just get it to discover everything in one go??

Hi Andrew..... I have to set my aileron in my multiplex heron and the surface have to go 7mm up and 5 down... How I could set it and may I put the plug of the aileron in different channel or have I to use a V connector?

Hi Andrew, I have Frsky Smart Port RPM with the 2 temp sensors and I am trying to connect it to a JHEMCU Dual F7 Flight Controller. I ask if you may know how to set it up in Betaflight 10.7.0. I am using a Flysky Nirvana Transmitter FS-NV14 2.4G 14CH with X8B Receiver (ibus).

Hi, thanks for your kind videos, which help me a lot. I have one more doubt that how can we add two sensors of same kind, say 2 current sensors FCS150A in a system. I am trying to change the id using the Frsky channel changer, and unable to get in discovery of new sensor process. If adding a custom sensor with address and changed physical ID then it is simply copying the value of the primary sensor. Please help me out. Thanks in advance

Another old one I ask "fresh" questions on 😄 Are these still your everyday sensors you use? I'm looking around at current sensor options and seem to be struggling to find any ?

Hi Andrew, nice video, I have a issue with the OpentTx (page telemetry) sensor called "FUEL", its default %, BUT, the problem is when I power up the model, this value just increase itself without anything is running or consuming amps, what is wrong? , its just started 10,15,16 % ....and so 100,111,115 and keep increasing with no sense or logic ... any idea ? thanks again and waiting for suggestions

Hi Andrew, does it all work in a similar way for the Taranis Q x7?

Could you tell me how you got the RSSI show on your Taranis with the X8R? I am reading things about having to install an LC filter?

The verio??? Can it be set up to warn if going above flying site height limits, warn of low altitude

Hi Andrew. What is considered as a low and a critical RSSI level? Thanks

It works with Rx frsky l9r?

Hi guys, you will be loughing, but I didn't pay attention on that the SMART port is required (I didn't know any difference between SMART port and side ports on a receiver). So now I got the telemetry FrSky FLVSS sensor as you are showing on the video, and a D8R-II plus FrSky receiver. I was sure everything will work as the receiver has "Telemetry" signature on it, but now I just realized that these two pieces of iron won't work together. Will somebody advice please the best way to make them work together (D8R-II plus FrSky receiver + FrSky FLVSS telemetry sensor) using any special additional device, for example... Or is it buying an X-series receiver is the only way to use the sensor?

Hi Andrew, can you connect 2x lipo sensors? I have tried, but the radio can only discover one????

Is there also a max speed value?

Good stuff as always Andrew. Thank you. Im just catching up with this stuff having recently picked up a Q X7 after my trusty 9XR Pro gave up the ghost. I've got a bit of a challenge for you...maybe...running OpenTX 2.2.2....do you think that once you've got a switch set to call up altitude ...you could instead use a Knob to call altitude AND create some sort of Logical Switch or Special Function to use a Knob to vary the time between calls.....so at the start of the Knob say it called the altitude every 20 seconds further round on the Knob would decrease the time between altitude calls...say 3-4 positions decreasing the time between calls by seconds in each position. Then you could have the vario running on a switch and have the altitude calls being called over the vario. Sometimes an update every 30 seconds is fine to know what the sink is actually like but then when you hit a nice thermal and the vario is screaming be nice to get the altitude calls every 3-5 seconds and really know whats going on up there. Anyhoo thx for you continued awesome vids.

Why would you use these instead of telemetry sensors on the flight controller? Most flight controllers can take data from barometer, voltage, airspeed, current and GPS etc. This can all be used on an fpv system as well as sent to the taranis

Yer gonna need a bigger plane.