Full skid plate installation on 5th Gen 4Runner (2020 TRD Pro)
Рет қаралды 5,406
Жыл бұрынIn this video, I demonstrate how I install a set of RCI aluminum skids on my 5th gen 4Runner.
Begin Disclaimer
This video is for demonstration purposes only. It is me demonstrating how I performed this modification. I make no warranties, nor do I take any responsibility for damage to your vehicle. Always seek advise or assistance from a trained professional.
End Disclaimer
Parts used:
CBI - TOYOTA 4RUNNER FULL SKID PLATES | 2010-2022: rcimetalworks.com/product/10-...
@LexusGX460-OFF-ROAD Жыл бұрын
Love the RCI skids.. we have a full set on our GX460 and we've bashed them to heck and so far so good 😅❤
@HudsonZRoamer 6 ай бұрын
Thanks so much for the video it helped me a ton installing everything on my 2020 T4R ORP W/ KDSS.
@InGratitudeIam Жыл бұрын
RCI makes great armor. I have a full set. I do think Hefty Fab Works though makes better armor because of all the gussets they add. Regardless, the lowest point on the 5th Gen 4Runner is the rear differential. You might consider getting that armored up. There are a couple of vulnerable points in the rear diff that need to be protected.
@AZOverland2017 Жыл бұрын
Nice Job!
@lucasr5675 Жыл бұрын
Very good content. When would you add the diff skid plate😅. Waiting on that video.
@rickdougherty1371 7 ай бұрын
great vid, thanks! I wonder if the blocker plate would work with the OEM bumper also, I need something to block the gap between the skid and bumper...the RCI blocker plate is quite narrow.
@scottzreality3061 4 ай бұрын
Thanks for the information
@mikecopros79 Ай бұрын
Great vid, did u purchase the steel or aluminum skids?
@user-xn6nz4xn4v 8 ай бұрын
Thanks for taking time to post this video, I will be doing this install next week with same setup as yours. Just curious if you had to do a body mount chop to fit the 285's on your Runner? Great looking rig!
@theoverlanded 8 ай бұрын
My setup is working quite well and the body mounts are not an issue. I dream of going to 295s and I know then a BMC would be required.
@lenaland 5 ай бұрын
Can you keep the OEM TRD Pro front Skid Plate and still use the RCI for everything else...???
@SUPaddict 7 ай бұрын
You ever regret going full aluminum and not steel?
@theoverlanded 7 ай бұрын
Not at all. The aluminum skids are holding up well and are light, which makes taking them off to clean for winter a breeze.
Baptism Overland
Рет қаралды 7 М.
Полярная звезда - Kuzey Yıldızı
Рет қаралды 7 МЛН
Braincatchers
Рет қаралды 7 МЛН
Vikings Garage
Рет қаралды 6 М.
Overland Pacific Northwest
Рет қаралды 23 М.
Jason Explains Things
Рет қаралды 39 М.
No Perfect Plan
Рет қаралды 175 М.
𝐆𝐀𝐍𝐉𝐔𝐁𝐀𝐒_26
Рет қаралды 173 М.
The One Place
Рет қаралды 7 МЛН
МАРТИН БОГАТЫРЕВИЧ garage
Рет қаралды 1,5 МЛН