Fully Built LS VTEC Turbo Kit Install and FIRST START!

Рет қаралды 36,015

2 жыл бұрын

Starting my Fully Built Turbo LS VTEC Honda Civic EG Hatch for the first time! Yes that was a mouth full. Seeing the built turbo lsv engine run for the first time is a moment that you all have been waiting a year to see. Today is finally the day. Also check out the new merch at the link below!
Rudz Racing Season Opener meet Is located at Rudz Racing at 6pm on 4/29: 610 Bennett Rd, Elk Grove Village, IL 60007
P. C. E. A.
Rudz Racing phone number: 847-258-3721
IG: @rudzracing
Instagram ► / boosted_john
Merch ► www.blownmotorclub.com
Music by Big Dogs ► / josh-noll-922986707
Music by Paniik ► / paniikmusic
Music by Impreza Beats ► / david-impreza-beats-anico

Пікірлер: 157

@boosted_john 2 жыл бұрын

Hope you guys loved the video! Thank you for all the support recently. The EG is back baby! If you guys would like to support the hustle, please check out the new merch at: www.blownmotorclub.com

@m.m.aautos6608 2 жыл бұрын

I still have no clue how you got this things ignition timing correct, your first video putting the engine back together I commented that your intake side cam gear spun when you went to tourqe it down, unless you fixed that then I wouldn't make any boost on this engine

@m.m.aautos6608 2 жыл бұрын

These are interference engines , make sure!

@kushmartin1880 2 жыл бұрын

Ya Florida EF Sedan homie✅🍊🌴

@andrewmitchell2189 2 жыл бұрын

John is the man! Dude makes more progress on his builds than most big KZfaqrs do with a whole team!

@theswampernation6265 2 жыл бұрын

Thick ranch dressing for the dub

@carsoncoopa 2 жыл бұрын

You're gonna do it John you'll make it big with the work you're putting in. Look at it this way these are gonna be the videos your million subscribers will go back to and binge watch you're setting yourself up for major success

@boosted_john 2 жыл бұрын

This is the best comment. Thank you.

@christophermusco6122 2 жыл бұрын

Thicker ranch all the way

@sagey2stanced7 2 жыл бұрын

Thick and creamy ranch dressing is the goat🐐 after boosted John ofc

@alexavila7369 2 жыл бұрын

Man just wanted to say your the reason I got my EG hatch. Honestly can’t wait to see your channel get more attention because your videos are always fire 🔥

@boosted_john 2 жыл бұрын

I really appreciate that bro. Have to started modifying it?

@alexavila7369 2 жыл бұрын

It’s bone stock other than the exhaust the previous owner put on it. I just got a B18C1 block to hopefully starting putting together a LS VTEC build. I’m super excited.

@rezurrec4777 2 жыл бұрын

Alex, if you wanna go Ls/Vtec you need a non Vtec block and a Vtec head. I’d recommend just going full B18c, or sell the vtec block and buy an ls block for way cheaper! Good luck with the build! 🤙

@alexavila7369 2 жыл бұрын

@@rezurrec4777 Yep I miss spoke I meant I’m looking for a GSR B18C1 head and I already have a B18B1 block.

@rdevney4 2 жыл бұрын

I love the build, I’ve been keeping up with your videos for the past 6 months. Amazing content keep it up!

@srt-4-thompson 2 жыл бұрын

I'm stoked to see this unit on the dyno!!

@bicboysam2347 2 жыл бұрын

Another Banger Video from my man Boosted Busch!

@boosted_john 2 жыл бұрын

Comment of the day forsure 😎

@bicboysam2347 2 жыл бұрын

@@boosted_john 😎

@save-the-civic6386 2 жыл бұрын

John your eg is gonna be a BEAST this summer! I’m actually going to boost my Lsvtec in my eg hatch probably within the next month I’d definitely want to be on the channel!

@rd95stang 2 жыл бұрын

Hell yeah, went pretty damn smoothly, can't watch t to see it tuned!!

@Ej1ohnny 2 жыл бұрын

Amazing time hope to see you there!!!

@boosted_john 2 жыл бұрын

Awesome man! Seems like quite a few of you guys go to this event.

@Ej1ohnny 2 жыл бұрын

@@boosted_john a lot actually if you have ever been to the dells it’s the whole strip lined with all different types of cars! Burnout competition Saturday and drift event Sunday every year! Keeps getting bigger and bigger

@playerinpink 2 жыл бұрын

So stoked for you man! You’ve come so far since the lsv eBay turbo kit. Love the 1320 ramhorn and purple cover that’s the plan for my bay as well! Looks fire 🔥 can’t wait to see what the car makes! Might have to make the trip to wisconsin since I’m in MN. It’s 3 hours from me

@boosted_john 2 жыл бұрын

It’s 3 hours from me too brotha 🙌

@pattyboi 2 жыл бұрын

Such a good video, great job editing my daddy Pasha! Excited to see it tuned :)

@JustPasha 2 жыл бұрын

Papi?

@markhondaturbo 2 жыл бұрын

Bro! I love the new merch design! B-series baby 🚘

@hoodrichracing3901 2 жыл бұрын

Great video and good job 👍

@jonathangutierrez9879 2 жыл бұрын

John I like my ranch like I like my ranch THICCC….. love the vids 🔥

@myPursesuitOfHappiness 2 жыл бұрын

Love the new merch! 🙌👍🌟 Great video as always! LY ❤️

@boosted_john 2 жыл бұрын

Thanks momma! You’re the true OG ❤️

@myPursesuitOfHappiness 2 жыл бұрын

@@boosted_john Awwww thanks! ❤️

@hondaccord2 2 жыл бұрын

I had the same block plug on my ls vtec and they aren't very good you see how they don't screw in correctly it was leaking a bit and when I tried to remove it it stripped inside the block I had to buy a huge tap and repair threads and use oem plug since it's steel and not aluminum just drill a whole in the middle and add a fitting you will think me later

@cmattdabrat 2 жыл бұрын

Moving along John! A proper tune will go a long way to keep her living.

@boosted_john 2 жыл бұрын

Coming soon brotha!

@cmattdabrat 2 жыл бұрын

@@boosted_john Right on!

@Up_North_Productions 2 жыл бұрын

Hell yeah bro!! Also thick ranch is better!!

@JustPasha 2 жыл бұрын

😎

@Slow_eg 2 жыл бұрын

Soo cool didnt know you where local till this video just started to watch your channel 😏

@dray4129 2 жыл бұрын

bought the hoodie as soon as i saw it. love the videos!

@DamianHyde 2 жыл бұрын

love me some B series... Trying to find a B18c at the moment, not easy in Australia!

@kearneyalmond1492 2 жыл бұрын

Thick ranchhhh🔥

@JustPasha 2 жыл бұрын

YESSSS!!!

@Dc2Vigil 2 жыл бұрын

Nice bro 🙏 Hopefully u get it Tuned with a good Tuner... That street Tunes gave me nightmares 😭...

@bradwillard8009 2 жыл бұрын

viscous ranch for sure

@KimboEK4 2 жыл бұрын

Hi John, great that the turbo is back on. I hope you will update everything step by step. What ramhorn brand u use and what turbo? Things I can not find for my future build is like : where to connect your aem wideband to the hondata s300? Would be nice about the flex fuel sensor how to install and setup with hondata. Most People are ging K-series but my car has original B16A2 so i want to stay with it. Great videos.

@venomoutlaw5780 2 жыл бұрын

man i saw you got to meet my buddy Geno! hope we get to meet soon! got a z6 turbo eg sedan

@firsttitlegaming3156 2 жыл бұрын

Great video

@krisflair4677 2 жыл бұрын

Your number one fan from Trinidad 🇹🇹

@KOYORIDE 2 жыл бұрын

Ranch should really have variable viscosity based on temperature. Oh yeah, cool car btw.

@boosted_john 2 жыл бұрын

Epic comment

@ruifilipe1316 2 жыл бұрын

Good channel mannnnn good job from 🇵🇹🇵🇹🇵🇹

@boosted_john 2 жыл бұрын

Thank you 🙌

@rebelbuilt3201 2 жыл бұрын

Ohh baby my delsol looks so good on the alignment rack haha

@boost_edjamesmathew2168 2 жыл бұрын

You only need a thin layer of Honda bond where the oil pump and rear main seal housing mating surfaces are the thin little cracks on both sides of the bottom of the engine they come with a thin layer of Honda bond from the factory as they tend to leak if no Honda bond is used

@89thstreetfilms 2 жыл бұрын

Don’t think I ain’t seen that delica lurking

@boosted_john 2 жыл бұрын

👀

@fryreartechnology7611 2 жыл бұрын

Ranch dressing... as long as it's blue cheese I'm good lol.

@Dylan_Cannell 2 жыл бұрын

Chicago land you said? I’m 45 minutes from Chicago. Definitely going to check that out 🤘🏼

@SpanishGrows 2 жыл бұрын

That lil tables a champ ! You were pushing that lil guy past rev limiter haha

@boosted_john 2 жыл бұрын

Lmao she’s a work horse.

@Wreckedekcoupe 2 жыл бұрын

That oil pan gasket is even reusable if tightened properly. No rtv just that gasket with metal in it. Speedfactory even sells that exact gasket. Hope it works good. Hopefully you dont have any metal shavings in your turbo or oil lines when the last motor went.

@Seeeeyaaaa 2 жыл бұрын

Hey John, Invest in a large rubber mallet to whack that oil pan off =D, also you can use a gasket + Permatex Ultra Black which is a flexible oil proof sealant, that usually stops it leaking well and try not to over torque the studs, I have the same pan.

@MarkyDGFX 2 жыл бұрын

Honda bond if used on a clean and dry surface is bullet proof main reason why Acura/Honda uses it as a sealant from factory on 80% of all sealing surfaces. Coming from an Acura Tech I even use it on my turbo e30 instead of RTV with my gaskets no problems…

@ericdrobniak9082 2 жыл бұрын

And engine is only as good as it’s builder !

@bseries8826 2 жыл бұрын

Trying to put together a budget turbo kit for my K EG too.

@ninjaStalker069 2 жыл бұрын

Downstar Hardware for the win!

@logankendrick591 6 ай бұрын

Hey John I was wondering what wheel and tire setup that is in the civic? Also I’m loving the videos I’m new to your channel and can’t wait to see much more

@jpahunna9988 2 жыл бұрын

Downstar bolts for the hardware 💯💯💯🔥🔥🔥🔥🔥💪🏾💪🏾💪🏾💪🏾

@DamianHyde 2 жыл бұрын

Agreed!

@juneeR6 2 жыл бұрын

Fucking love your car I can’t wait to build one🔥💯

@DamianHyde 2 жыл бұрын

Get in there. Building Honda's is a lot fun!

@dxcenataker 2 жыл бұрын

How many first starts this car had in past 2 years jeeeeshhh

@RyanW420692002 2 жыл бұрын

whats the wheel and tire setup and off set and all that good stuff

@sobczakj2005 2 жыл бұрын

Awesome work. I respect garage builds. I looked on your website for the cream shirt but didn’t see it as an option. Did you sell out?

@boosted_john 2 жыл бұрын

No it should be there! The cream one is so awesome.

@notone4029 2 жыл бұрын

Love this build series! John, could you maybe tell why you went with BOV on end tank of intercooler? Thanks in advance

@boosted_john 2 жыл бұрын

Other than it looks cool and the flange was already welded on, no reason.

@notone4029 2 жыл бұрын

@@boosted_john .K thanks. Yeah does look good there.

@lgamboa24 2 жыл бұрын

the best ranch dressing is that homemade restaurant style ranch thats more watery

@boosted_john 2 жыл бұрын

yeah bro. agreed.

@jacobgrzechowiak5231 2 жыл бұрын

Better hear that 2 step in the dells

@geraldgoodiii6993 2 жыл бұрын

The good kind of ranch is the kind left at the grocery store

@kylereeves2406 3 ай бұрын

Fuck yeah man i was at that auto motion in my fiat 500c gucci im gonna be going in hopfully a civic dx hatch

@skubasteeve8985 2 жыл бұрын

The Coolant fitting you installed is for what?

@boosted_john 2 жыл бұрын

Turbo coolant feed

@justinstirpe3672 2 жыл бұрын

Something hits different when ranch is more runny with steak fries at Red Robin

@boosted_john 2 жыл бұрын

Very specific. I like it.

@walkerbruchman8597 2 жыл бұрын

Are you located in Wisconsin? If so that’s awesome never find car tubers from my home state

@ktmclay 2 жыл бұрын

Check out mine. I'm in the dells

@austinpeterson4898 2 жыл бұрын

Nah man he’s from the Chicago area

@rowdy6087 2 жыл бұрын

Honda-bond on the oil pan gasket is 10/10 the worst decision to make, can vouch for this since it broke the studs off on the oil pump from expanding when dry lmao.

@jaimegonzales430 2 жыл бұрын

Honda bond is made for pans that don’t have gaskets. These engines are meant to only have gaskets due to the pan not being a flat matting surface

@rowdy6087 2 жыл бұрын

@@jaimegonzales430 Well put. The other problem was not using a Genuine Honda Gasket, Fel-pro always leaks.

@jaimegonzales430 2 жыл бұрын

@@rowdy6087 yes if you can get it from honda do it. I worked at a honda dealer for 8 years and most aftermarket stuff doesn’t work right in regards to maintenance

@rowdy6087 2 жыл бұрын

Also forgot to add that watery ranch is highly undesirable. 😂

@andreasyiangou770 2 жыл бұрын

Hey John. Ive got a b18c im gathering parts to build it for boost. Many guys who are into hondas in my country say that im gonna crack a sleeve at some point. Im putting in forged pistons, forged rods, arp headstuds and a block guard. I wanna run my high pressure around 1.2 bars and low around .7 bars. Im shooting for 300 to 350 at the wheels. What do you think? Will i get a cracked sleeve ? Boring it to 81.25mm using wiseco 9.9:1 comp.

@DamianHyde 2 жыл бұрын

It's possible you will hit 300hp without going to 1.2 bar. The block guard is definitely going to help. Have you considered re-sleeving the block for piece of mind?

@andreasyiangou770 2 жыл бұрын

@@DamianHyde i have considered but because i live in an island in europe it is a pretty expensive process. What i read is the reason sleeves crack is detonation. It would be good to know a few ways and measures i can take to prevent that from happening.

@johnmurphy1471 Жыл бұрын

Hidden valley ranch is the only ranch that is acceptable

@lifeintheboondocks7516 2 жыл бұрын

BTW, with honda bond, it degrades qnd clogs the oil sump after a longer time. Ruined more then one motors bc of that. I didn't put it on tho it was cars I bought

@tizchill5329 2 жыл бұрын

lets gooooooooooo

@DamianHyde 2 жыл бұрын

Lets...

@maximillion1629 2 жыл бұрын

Ranch gotta be thicc

@tri00azerath 2 жыл бұрын

if ranch was any thinner it wouldn't stay on pizza while you eat it, so thicker I suppose.

@DamianHyde 2 жыл бұрын

I agree

@CraaaigV302 2 жыл бұрын

That poor oil pan lol but used that perma dry felpro pan gasket over a year ago hands down best design ever if your oil pan leaks after installing 1 of them u shouldn't be working on cars

@parkerbethke 2 жыл бұрын

1.9 tdi swapped honda

@birdiesantos224 2 жыл бұрын

Check out downstar bolts

@DamianHyde 2 жыл бұрын

They are nice!

@FR11 2 жыл бұрын

#BLOWNMOTORFAM

@kavieshsadhoe4568 9 ай бұрын

Hi what,s the name of the engine

@jrmedina4720 Жыл бұрын

What brand turbo manifold?

@boosted_john Жыл бұрын

1320 performance

@krisandthearden5198 2 жыл бұрын

We have ranch here in the u.k bro 😂😂

@boosted_john 2 жыл бұрын

Nah man. No way. Not possible. Only Americans can obtain ranch. It’s intergalactic law.

@stephenclark6267 2 жыл бұрын

Runny ranch like my booty after tacobell

@boosted_john 2 жыл бұрын

YES KING 🙌

@9blockperformance948 2 жыл бұрын

I need my ranch thick like my chick

@DamianHyde 2 жыл бұрын

Dayum, second that!

@scotts7353 2 жыл бұрын

Kinda new viewer but u may want to drill the baffling out of the valve cover to make sure no dirt or sand from being blasted is in there. Heard tons of horror stories about that happening

@boosted_john 2 жыл бұрын

I never thought about this :/

@angel__soft9184 2 жыл бұрын

Ranch should def be thicker

@Wreckedekcoupe 2 жыл бұрын

I have gone to automotion ever since I had my license. It use to be very sick and respectful. Now its turned into a cop festival from all the brodozers and hicks. Last year people were throwing things at my civic, I was pissed. I love the car show and fri and Saturdays are the best days. There are alot of douche bags and drunk idiots but if you can avoid them you can have a great time. I love Wisconsin Dells, tons of waterparks and great attractions in the area.

@ishaiahsmith 8 ай бұрын

Thick ranch all day

@903sweetlife6 2 жыл бұрын

Let’s race

@egfi6 2 жыл бұрын

Runny ranch kind of guy

@arkabul9107 6 ай бұрын

ranch should be thick

@PopVtecZ 2 жыл бұрын

More viscous imo

@NickMoises04 2 жыл бұрын

I like my ranch like I like my girls. T H I C C

@DamianHyde 2 жыл бұрын

Dayum!

@karlinnaidoo3630 2 жыл бұрын

21:51 that welding is so sad

@boosted_john 2 жыл бұрын

It was my first time ever welding. I’m proud of my booger welds.

@seanh3355 2 жыл бұрын

Runny ranch is best for fries and pizza and thick ranch is better for salad

@hooknbooktv452 2 жыл бұрын

Niceee I just started my built gsr for first time check it out !

@boost_edjamesmathew2168 2 жыл бұрын

Magnetic oil drain plugs are pointless cause the bearing material is copper leaded bronze & aluminum 🤷‍♂️

@wesleybates5585 2 жыл бұрын

I dont like ranch dressing, maybe a little dip on hot wings but thats all.

@jameskay3310 2 жыл бұрын

You seem like a good dude and I like your car, but you keep saying boys like Kyle from boostedboiz, what up with that, just be yourself✊

@boosted_john 2 жыл бұрын

I grew up playing hockey. I’ve been saying that since I was 13 years old. I respect boostedbois a lot and would not intentionally copy them.

@jweeeo 2 жыл бұрын

I think ranch is better loose

@ktmclay 2 жыл бұрын

Thin ranch lol

@boosted_john 2 жыл бұрын

Ye skrt

@The_Redkween 2 жыл бұрын

Oh John, John, John……noooooooo on the block-fitting. If the threads don’t feel like they are working, stop the presses. That block-fitting obviously has the wrong thread-pitch and I’m hoping you didn’t crack your block forcing it in there. Buying a tap for that will be more expensive than that fitting. I’m guessing the block is a 1.25 pitch and the fitting was a 1.5.

@boosted_john 2 жыл бұрын

I sent it. It's not leaking. I'm happy.

@coltongrace5664 2 жыл бұрын

so about the ranch, i feel like ranch is supposed to be more thick than other traditional dressings. But I dont want my shit to be like mayo yanno what im sayin.