FX Pocket Crony fix
Рет қаралды 5,491
Жыл бұрынHaving issues collecting crony data from your Fx Pocket Crony...This may sort it out for you...After a super frustrating day with no data only good old-fashioned pencil and paper( well #zanprojectiles card inserts) make for great dope cards! Nice one Zan!
....I took a look inside.
@MartinHealy Жыл бұрын
Hi, Thanks for sharing. I haven't had any serious issues with my FX Chrony to date apart from it occasionally failing to register a shot. I was a little surprised at the iffy quality of the construction given the FX reputation. A tip I will share with you: If your rifle allows it try putting a couple of Orings round the end of the air cylinder and mount the chrony on the cylinder rather than the barrel. This arrangement works well on my HW100. The advantage is that the POI and barrel harmonics are not changed as it would be if the chrony is hung from the silencer. All the best, Martin
@stigcarboncreative Жыл бұрын
Hey Martin, Yeah I was a bit too, Just looked a bit odd. Ha ha, The ghost shot! I made a carbon phone and crony holder that works a treat, but I do put it on my scope too which also works well. Yeah, hanging off your moderator is not the way to go. I've been doing laser deflection tests..Very interesting results. have fun! Stig
@ThePneumanicHunter Жыл бұрын
This is a good fix. It worked for me too. Thanks for the video.
@stigcarboncreative Жыл бұрын
Super cool. You are most welcome bro.
@stigcarboncreative Жыл бұрын
Tested for 3 days...She never missed a beat!! Fix a go peeps!
@martdod Жыл бұрын
Good information. Thank you!
@stigcarboncreative Жыл бұрын
Most welcome bro, Let's hope this is the issue..Every shot after has been picked up! I have cut the pad down now...So testing to see if that has worked. Keep ya posted Mark! 🤟
@martincook3459 Жыл бұрын
Mine records shots I haven't taken, going to give this a try.
@stigcarboncreative Жыл бұрын
Yeah, super frustrating! Let me know how you get on!! Stig
@martincook3459 Жыл бұрын
That's done the trick, works great now, thanks.
@stigcarboncreative Жыл бұрын
@@martincook3459 Super cool dude!
@rellmonger7935 Жыл бұрын
Kool infor, thanks
@stigcarboncreative Жыл бұрын
Most welcome, hope it helps.
@ThePstorm Жыл бұрын
By pushing down you appear to be disconnecting the front three pin connection? Im sure the sensor is supposed to be at that angle.
@stigcarboncreative Жыл бұрын
Yes, The pad is higher than the connector block, The jury is still out I guess but all I know it's working fine now.
@josephrickard7973 Жыл бұрын
I'm going to give that a shot. Mine will miss a few in a row here and there. I'm more concerned with the accuracy though. I'll shoot through a full size chrony on a tripod at the same time and I get way more consistent readings on the Caldwell full size than on the FX pocket chrony. My impact M3 will be dead on at 50 yards, shot after shot. Caldwell will read 1,001 to 1,005 in 10 shots, FX pocket will read 970 to 1,009. But all my shots are within a half inch group. So I wasn't that impressed with the FX pocket chrony. Convenience is nice but not if it's not on point. 34 grain javelin slugs 1,004 fps.
@stigcarboncreative Жыл бұрын
Yeah seems to be working fine now mate, I tested it a few more times since and every shot was picked up...Yeah that can be super frustrating, I have two Cronys so I put them mid and end-range...Trying to get super accurate data is hard if one is not reading right...So time-consuming but very important. And very rewarding to get better ES-SD than March-grade ammo. The Lab system seems to be good, but super pricy! Keep ya posted!🤟
@fxpeter22 Жыл бұрын
Hi, using your data the point of impact change at 50 yards between 970 and 1009 fps is less than 0.2", so well within the 0.5" groups you are shooting. Even at 100 yards the POI change is only around 1" . I think the FX is doing a better job than you think. Hope this helps with your thought process. Happy shooting
@stigcarboncreative Жыл бұрын
@@fxpeter22 Hi Peter, It does do an amazing job..I love it, so handy ( I did do a power hack on her) ha ha..I test a shed load of my own carbon fiber creations..So data collecting is very important to me...As you know when one or two links of data are lost so goes chunks of time. Always! 😁You too! Br Stig
@ku4nz Жыл бұрын
thanks, will check mine
@stigcarboncreative Жыл бұрын
Most welcome, The power hack is working well too.
@woynoff 9 ай бұрын
Put some hot glue on the connector and it will never ever move again.
@stigcarboncreative 9 ай бұрын
Yeah, hot glue or RTV. I was going to lower the foam pad as an option too. The jury is still out. 🤔
@graffitinorthwest3877 Жыл бұрын
Mine will not work on my pcp Airguns. Only my co2 or pump guns. 😢
@stigcarboncreative Жыл бұрын
Give it a go fella, may sort you out!
@arthurmow262 11 ай бұрын
Have you chosen the right profile for the PCP? There is a CO2 profile that is tailored to slower fps, but may not be enough for a PCP rifle.
Fabiosa Best Lifehacks
Рет қаралды 37 МЛН
UpNorth AirGunner | Airgun Hunting
Рет қаралды 10 М.
Precision Airgunning - Long Range Target & Hunting
Рет қаралды 24 М.
Airguns & Pesting Ch.
Рет қаралды 7 М.
Будни ММА
Рет қаралды 588 М.
ФУТБОЛ ӨМІРІ
Рет қаралды 952 М.