Рет қаралды 14,830
Continuing from part 1, here we will continue wiring and reassembling our tail lights.
Watch part 1 here if you haven't already:
• G35 Coupe HALO tail li...
Below is a list of tools and materials you'll need to get started. Additional tools may be necessary.
Tools, parts and materials:
Gloves (Mechanix and latex)
G35 coupe tail lights
LED halo rings, 90mm and 110mm (bit.ly/qasimhalo)
Flat tip screwdriver
Phillips head screwdriver
Ratcheting wrench with 8mm deep socket
Wrench, 8mm
Acrylic knife (bit.ly/acrylicknife)
Hot knife OR dremel with plastic cutting disk
Drill with 7/64 bit
Alcohol wipes
Surface to paint on (ie cardboard)
Clear storage container
Primer
Spray paint
Fishing line
Super glue
Butyl headlight sealer (amzn.to/33eDOY8)
Soldering iron kit (amzn.to/2no47vs)
Rosin core solder
Wire strippers
Heat shrink
Various clamps
Diode Dynamics Tail-as-Turn (optional)
----------------------------------------------------------
All Music by LAKEY INSPIRED.
Track 1 - Warm Nights
Track 2 - Good Morning
Track 3 - The Process
Track 4 - I Found Me
Track 5 - Better Days
Track 6 - Warm Nights
Track 7 - Blue Boi
Official Soundcloud: / lakeyinspired
License for commercial use: Creative Commons Attribution 3.0 Unported "Share Alike" (CC BY-SA 3.0) License.
creativecommons.org/licenses/...