These "Getting Started with SketchUp" videos are very helpful. Thanks :)

an inspiring & friendly tutor

Really enjoyed and learnt a ton from watching these video series. For duplicating the windows, I learned that by grouping the window elements into a group and then creating a component of the group and then copying the component is far more efficient. When making future changes to the component, will also apply changes across to all of the copies of the component. I bet this workflow is covered in later videos.

The one who also experienced the same problem of entering 40'' and so forth don't include the apostrophe, I struggle a lot figuring this out :P, thank you so much man I appreciate it a lot

Love everything about this training series. I love it so much that I can forgive that you are not using the metric system :))

This has helped a lot. Thanks SketchUp!

this series is a LIFE SAVER :D

what measurement do you open the document on?? like is it the metric system or the American one because when I tried the American one then it doesn't work when you type in the measurements.

These videos are really helpful. Thank you! :)

Now how do you resize chairs because when I load it from 3d Warehouse it was so big it could fit in the room

Nice.. I learned alot from it nice.

all the series very helpful. Thanks!

I almost signed up for Lynda.com for paid instruction on using SketchUp. If I were to use this program for Professional use, I would of gladly paid. Just to get the basics down for a remodel, this is working out perfectly. I am in no way saying Lynda.com isn't worth it, it's a magnificent learning program, and have used it in the past. This is working out great for my purpose at this point for now.

Bravo...lot of thanks..

Great Video!

Learning a lot , thanks

Thank you so much! This helped me a lot!

how do you get the toolbar on the vertical left side ? thank you

at 2:37 into the video, you were able to use the push/pull tool to extend that rectangle part. I could not do that on my end, I did everything like in the video, but it wouldn't work. Any tips?

I found that pulling into the room to create the design of the wall very helpful. Creating a clean wall on the other side. This video helped me correct my idea design. Thank you!

Who else is doing this for school

for repeating the same window and i selected all the window then i copied and pasted it into the rectangles we already did is that ok ?

I'm loving this series! I have a question, how can I put the wood floor in the other direction? Also, I'm trying to download the chair from 3D Warehouse, and when I click "Download" it does nothing, how else can I insert furniture?

9:05 You mean there's no way to select that first window as an object and copy and paste it to where I want the 2nd and 3rd windows? Why not be able to select it, save it as an object to a custom library, and then pull it out and place it wherever you like? If you have a house with 30 windows you have to build them all one at a time?

Sketchup's inference is genius

Best tutorial I've come across

What template you use?! I keep getting smaller things then you have.

How do you use 3D Warehouse in Sketchup 2017? And on a Mac? I am not able to access it..

it wont let me type in measurements

This has helped a lot. Thanks SketchUp! cool

i have spent two days watching sketch up videos - i learnt more in in these 15mins - simple clear info - the others are very confusing

I am new to this and I am trying to put a door on the front of the house using 3D warehouse. I download it put itinand it looks like a line what am I doing wrong any help is appreciated

Can we copy paste the finished 1st window on the other two remaining windows ?

I am using trial version, when I try to add a 3D object from 3D warehouse, the object is always bigger than my sketch. this is due to trial version or there is something to adjust? Please advice

Is that possible to have a printed pdf of the text in the video?

Need some help...I have followed everything and it is working perfect until you get to the point of coloring the window frame. My issue is I can not get the color wheel to come up at all. When I close the materials window and open it as the default I get the window with all the textures/materials. Is there a way to get only the color wheel? I've tried using the edit option but everything is grayed out. Please any help appreciated. Great Video btw!! Oh yeah, using a windows 10 pc.

how do you make an object bigger

how did you dupe the rectangles

6:56 are they mullions or muntins?

Hi, SketchUp! I have a question for you. I am using an older version of SketchUp for my classroom, 2013 to be exact. When I click on download to put the chair in my model, it doesn't put it directly into the model. How else might I be able to put it in? Thank you!

Hi! Which template should I choose to create this kind of projects?

cool :o

hola cuando señalas el marco interno de la ventana, a mi no se me va todo para atrás debo hacer un grupo para que esto pase? yo borre las lineas pero al hacer push-pull son independientes.

I have a doubt🤚🏻 in this model on top surface i drew a line but it didn’t turn into roof (i used move tool)

Cool

At 9:45, why can't I find this pigment palette in window 10? Is that only showed in MAC? How can I select different colors like you do?

WOW

When I try making the windows with the lines that cross each other at 6:40, I don't get 4 separate rectangles, only 2. What am I doing wrong?

Can someone tell me what version he is using in here and also what version you are preferred to use?

ganda bideo o malhor na mainha opininum obgado plla atencum

🤩

is there a way to save as a stl file to be print

7:50

Wouldn't it be nice if we could push/pull several selected faces at the same time? And copying a selected group.

Why is it that when I draw a rectangle, depending on which direction I drag the cursor and enter exact dimensions, the rectangle does not end up oriented the same way? It's as if it doesn't know which is the x and y axes in your entry. For instance, I can enter 5', 20' for a 5 ft by 20 ft rectangle, but it will end up either being 5' in the x direction or 5' in the y direction depending on how and where I place my cursor on the screen while entering those numbers in the lower right box. Is there some rule for not making this happen. In AutoCAD the first number is always the X direction number and the second is the Y direction number.

Watch in 50% Playback Speed for best experience

I get ocd cuz my lines aren’t straight on my computer but yours is

excellent work

btw 3d wherehouse on windows is in file

teach me v ray please

i am not getting 3d warehouse.....

send me the link for this sketch up!!!!!!!!!!!!!!

make this vidioe more detailed on what to do

Agr eu sou solteira e ninguém vai me segura Daquele jeito !!!

bem fixe

who else is learning about this in school

surfaces counted:64

Thanks for a dead design lesson

why it to small

couldnt he have made the windows a component so he wouldnt have to repeat the process for all 3 windows.

why not just build one window then copy to the other two places?

Too fast. Cannot see where the cursor is placed. Have to keep rewinding video to watch again sometimes 2 or 3 times.

mas ca gamda bideo esto sinhe é cultura ficei emocioneado borreime todo em lagrimas afins

Who cares about the units. The important thing is the content of the procedures. Please use your brain a little. All theese videos are just great for beginers like me. Thanks a lot for teaching us.

Also, it DOESN"T depend on which way you move the cursor more, despite what another poster said. They said that the measurement box takes the first number as the number in the direction you moved your cursor MORE. Nope doesn't happen. Try this....select the rectangle tool, place it on the origin and drag it MORE in the green axis direction, and type in 5',20'. It will draw a rectangle as 5' in the red direction and 20' in the green direction (which contradicts that poster). Now using the rectangle tool again place the starting point of it at the mid point of the right long edge of the rectangle you just made. Drag the cursor MORE in the red direction and type in again 5', 20'. The rectangle now is 20' more in the red direction and 5' in the green direction. Is this a bug in the software? There's no rhyme or reason or logic to it. It would seem that you NEED to know and want to know which way this longish rectangle is going to end up when you are drawing and don't want to HOPE it's going to go in the right direction.

yee

hello webb children I AM WATCHING YOU

Ok

can you use Metric sistem? cm, m, ? thnks

is this sketchup pro or make?

im the exactly the 2100 liker of this video

this is sketchup and not pro, correct?

these are good instructions its just no one wants to watch a boring video so put in some fun stuff!!

BRUH MOMENT

funny how in sketchup creating n-gons by removing "extra" lines is called healing the surface lol, it might look neater, but is not a good 3D modelling practice...

Six years ago, it was possible to use 3D Warehouse freely, without problem. But after a few changes of ownership this is no longer the case, unless of course you are going pay out of your noses for annual Sketchup prescriptions… yeah. Sad really.

n sei fazer hastag borisso hastag:gandavideo

Comment avoir la conversion en Français ??? Merci !

8:25 You could've just made the whole a window a group and copied and pasted it lmao

FIRST

third

That beautiful moment you find out that America changed to metric system

noa noa

first

vamos conversar

epic

@ 7:26

uma grande meda

eu tb noa

thats a joke why does this guy have 440 k abos