how to install fog lights on honda element 2003

No video

how to install fog lights on honda element 2003

Рет қаралды 34,570

ghostlyrich

Күн бұрын

please like this video :)
Facebook: / ghostlyrich
Twiiter: / ghostlyrich
made a quick video hope it helps

Пікірлер: 53

@MrBeekermc 12 жыл бұрын

Thanks man, I just used your video to get my fogs installed. My E is identical to yours, and i also live in BC. Maybe I'll see ya out on the roads;). Cheers!

@animeWORLDuser 7 жыл бұрын

props for doing this in the rain bro

@AnthonyJ350 12 жыл бұрын

Nice video, very informative and easy to follow!

@mishabear9261 4 жыл бұрын

Your video helped me a lot! I got my lights installed and am ready to go except I have one difference. Your power has a brown plug to plug in. Mine has a bare wire and a wire splice. Any idea what wire to splice into? I am hopeless when it comes to electrical.

@rm4213 3 жыл бұрын

I having the same issue. That's plug that he shows is a hot wire so the light on my switch stays on when the car is parked. I tapped into the cigarette lighter for accessory only and it blew the fuse on my fog kit I replaced it with the same amp fuse then it blew my cigarette lighter fuse and has continued to do so. I'm trying to find a location to connect it to only work when the car is on and when it's off the fog light kit get no power but since the kit has a 30amp fuse I'm assuming anything less than that it will blow the circuit.

@mishabear9261 2 жыл бұрын

@@rm4213 I took your advice and I tapped into the rear wiper arm. It was the least used item. But I have to make sure I turn OFF the fog lights before I use it or I will blow a fuse.

@rm4213 2 жыл бұрын

@@mishabear9261 I ended up tapping into the power mirror fuse I've had no issues at all.

@ghostlyrich 12 жыл бұрын

glad it helped! lol its my aunts E i just installed the lights for her.

@troydavis84 8 жыл бұрын

thanks alot for this because i just wanted to know how to remove the bumper click so i can change the condenser.. great video anyway now I'm inspired to get fog lights to

@ghostlyrich 11 жыл бұрын

the power wire should be. if its a aftermarket kit you will have to track the wiring and spot the fus or the fuse that connected to were your getting power from. check the fuse box under the hood and under the dash for fog light fuse for factoryor aftermarket aswell

@joanchamberlain5678 11 жыл бұрын

thanks - hopefully my mechanic in italy can follow. really good video

@robertomcdonough4708 3 жыл бұрын

Were did you get the fog lights

@beachboy4928 Жыл бұрын

Thanks, was this the OEM switch/wiring/fog lights.

@acousticreflections1 6 жыл бұрын

Your headlights look amazingly good, originals? Changing out my headlights also, faded and peeling. Weather not as hard on them up north?? Cheers and thanks......

@rm4213 3 жыл бұрын

Hey got a question I just installed fog light kit just like yours. But my fog light switch stay lit up and when I press the switch it gets brighter indicating that the fog lights are on inwhich they are. But my concern is the light on the switch staying on when the car is off and parked. Should I get another switch?

@ghostlyrich 12 жыл бұрын

no probs glad it helped

@Crazieboy86 12 жыл бұрын

Thanks men it helped me alot

@p.granger8824 4 жыл бұрын

This video was posted a long time ago, so I was wondering how those WinJet aftermarket fog lights held up. The reviews on those are well, not good. Did you get any condensation, water in them or the housing rusting out? It may do some good for anyone seeing this to know, as it isn't the easiest job to do. Especially if you are cutting out the bumper.

@ghostlyrich 4 жыл бұрын

Bit of condensation happened. Definitely stick to the plastic lens the glad ones get cracked very easily

@p.granger8824 4 жыл бұрын

Thanks for the reply. I think I’m going to retro in some new OEM factory lamps from Valeo. I would have vultured them out of a Ford in a junkyard if I would have been able to find the right model. But no luck, so new it is. I’m not sure if the valeo is glass or plastic lens, but I’m sure the lens is probably tougher than on aftermarket.

@ChristianJohnsons 12 жыл бұрын

great how to! thank you.

@ghostlyrich 12 жыл бұрын

sorry man was trying to get a good shot but didn't have anyone to hold the camera well i drilled

@BooneTennis13 10 жыл бұрын

What type of kit did you use for this? I am looking to put fog light on my '03 E too.

@ghostlyrich 10 жыл бұрын

bought it off ebay lol

@BooneTennis13 10 жыл бұрын

ghostlyrich was there a name or parts number?

@ghostlyrich 10 жыл бұрын

i cannot remember :( all i did was type in year make and model with fog lights at the end on ebay

@applepoop10 2 жыл бұрын

Does the fog lights have glass lenses?

@ghostlyrich 11 жыл бұрын

what turns the radio on and off sorry? tell e exactly what your working with

@johnpaulmccormick 11 жыл бұрын

Having issues with my fog lights on a 2004 EX. One burned out. Replaced the bulb and the other went out as well. Now I have 2 new bulbs and neither lamp works. Is there a dedicated fuse for these or an inline relay or something that could be bad?

@Kid617 5 жыл бұрын

where did u buy your foglight kit from

@olivialoris4841 2 жыл бұрын

i really wanna install fog lights on my E like this but im just scared ill mess something up

@Plancton25 11 жыл бұрын

Looks like your are deft with wires around Honda Element. So I got question about radio connection. I bought one of those conversion kit but all what it does turns radio on and off. I got no sound coming to speakers.

@jameswarner300 2 жыл бұрын

Dude you did way to much skipping in this video.

@JamesTorrey 8 жыл бұрын

Where did you get your kit? Did it come with the switch?

@ghostlyrich 11 жыл бұрын

could install a diffrent switch. its not to bad

@ghostlyrich 11 жыл бұрын

i posted it like that because it worls for both.

@ghostlyrich 11 жыл бұрын

hopefully. this should be pretty simple for him :D

@ghostlyrich 12 жыл бұрын

thanks mate

@atxjax1 7 жыл бұрын

has that fog light kit got any condensation / water inside the lights?

@ghostlyrich 7 жыл бұрын

Jackson Cruz over time it did a little so resealed them :)

@ghostlyrich 10 жыл бұрын

only had that day off and had to get it done. haha its only rain

@Bayward 12 жыл бұрын

wish i could have seen that hole saw part, not sure how you did that. great video

@ghostlyrich 12 жыл бұрын

thanks

@Mikenopolis 11 жыл бұрын

I wish I feel more comfortable with this. the wiring is what confuses me. I really want fog lights on my E. also both those button holes are already used. Cruise and VSA =(