Giant 1:6 Ghostbusters Ecto-1 unboxing, Review & build tips.

Рет қаралды 202,927

Meanwhile in the man cave

4 жыл бұрын

We unbox and put together Blitzways 1:6 scale Ghostbusters Ecto-1

Пікірлер: 318

@InglesSpanishConversation Жыл бұрын

...I think the last time we all had toys "this big", was when we were 1 year old...its just that WE were scaled down. I say that because I swear I have memories of playing with cars that were longer than my arm...that has to explain it. Perhaps, this is one of the best ways to feel like a kid again .

@Meanwhileinthemancave Жыл бұрын

Best comment ever! So true! Thank you for watching!

@eldo59 3 жыл бұрын

Wow! I have several Ecto-1 models but this looks to be the crown jewel of them all. Very nice!

@Meanwhileinthemancave 3 жыл бұрын

Thanks for watching!

@cheddarcollectables5218 3 жыл бұрын

Wow nice score! Your going to need a bigger house!lol

@mikeecko Жыл бұрын

Holy nostalgia overload!!!! Right off the bat ,. Ecto-1 is so impressive. It's actually a beautiful fabricated piece of art. The engineering that went into this piece is kind of mind-blowing. The attention to detail is what every company that's going to put out pieces like this should take notes from. Congrats on getting this monster. Now on to busting some ghosts 💯💯💯👏🏻👏🏻👏🏻👏🏻👏🏻🙌🏻🙌🏻🙌🏻✌🏼👍🏻

@Meanwhileinthemancave Жыл бұрын

Thank you so much! It was almost three long years of waiting for it to come after ordering it but it was worth the wait. Did you check out the life-size Slimer we unboxed on the station?

@MrNpack Жыл бұрын

kzfaq.info/get/bejne/fKeqYNdppr6wgac.html

@rdizzo1313 Жыл бұрын

Its plastic…

@erock1779 3 жыл бұрын

Thanks for showing the underbody. Very nice details with the exhaust system and front suspension.

@Meanwhileinthemancave 3 жыл бұрын

Thanks for tuning in!

@halloweenjack3565 Жыл бұрын

Looks bloody amazing ! characters are so lifelike as well.

@Meanwhileinthemancave Жыл бұрын

Thanks for watching! Happy holidays!

@Greego 4 жыл бұрын

Very helpful video. You specifically answered my primary question in it.

@Meanwhileinthemancave 4 жыл бұрын

Thank you for watching! What was your question?

@Greego 4 жыл бұрын

@@Meanwhileinthemancave I have my Blitzway Ecto-1 on the 2nd level of my home. I was debating on whether to assemble it upstairs then carry it down to my basement after I had it assembled. But giving the reported size of the piece, I decided to check out KZfaq videos to see if someone would advise against this or not. It was a long shot but you actually not only answered that question, but you also reiterated it multiple times in the video which made the point loud and clear for me. My basement won't be the best place for me to assemble it due to comfort/ergonomics but I took your advise to heart on this one. Thanks. Subscribed!

@Meanwhileinthemancave 4 жыл бұрын

Glad to help! Hope you love your new car!

@ChesterSaldivar Жыл бұрын

Missed out on this one but pre-ordered the Ecto 1 Afterlife version. I hope it’s as awesome as the first version. Thanks for the vid! 👏👍

@Meanwhileinthemancave Жыл бұрын

Hope you enjoy yours as much as we love ours and thank you very much for tuning in!

@unrewritable 2 жыл бұрын

What a beauty but prices are insane in the secondary market. The only way of getting this now for us collectors is if Blitzway decides to do a reissue.

@Meanwhileinthemancave 2 жыл бұрын

Very true and I think the price has gotten worse with the anticipation of the new movie. Thank you for watching!

@lulaflorentino2741 Жыл бұрын

Gostei do giant 1;6 chotsbusters unboxing and build

@azheat1416 4 жыл бұрын

I got my Ecto and for your lights that are not rotating...the silver part in the middle is the motor with a single gear in the middle. Mine didn't rotate and i slightly pried it up away from the light bar and it engaged the lights. Try that and it should work. Plus i lightly sprayed my light bar gears with teflon lube which quieted them a lot plus i offset their rotation for more realistic look as they rotate!

@PhilShepardLLC 4 жыл бұрын

Awesome tip! I just received mine today and the rear light bar wasn't rotating. Prying up on the silver part got them working. They are quite noisy though. How did you get to the gears? Does the silver part come off with some force or what did you have to there?

@azheat1416 4 жыл бұрын

Yes....I took mine completely off and there rotating lights have non motorized gears that i rotated out of sync. The silver middle does all the work. I just reglued the silver part back on after that but i lightly sprayed teflon lube on the gears

@Meanwhileinthemancave 4 жыл бұрын

Cool tip! I tapped mine on center a little and they seem good now.

@transamin85 4 жыл бұрын

@@azheat1416 do you have pics of you taking the lightbar apart?? I would love to change out the leds to 360 led instead of ones that shine up

@SpiderHulkThing 4 жыл бұрын

God bless you Az Heat. Serious you may be my favorite person on the interweb

@OneLovePsych 2 жыл бұрын

Blitzway Afterlife ECTO-1 is on the horizon, I’ll finally have a 1/6 ECTO-1! Nice vid bro, I’m just watching old unboxing videos to get ready for it!

@Meanwhileinthemancave 2 жыл бұрын

Awesome! I read about that one, it has all the working features from the Ghostbusters afterlife version including the Ghost trap. Thanks so much for watching!

@roma9506 Жыл бұрын

cool big car ghostbusters

@Meanwhileinthemancave Жыл бұрын

Thanks for watching!

@J0r-El 4 жыл бұрын

Thanks a lot, this was helpful!

@Meanwhileinthemancave 4 жыл бұрын

Thank you for watching we really appreciate it!

@jasonrusso9808 Жыл бұрын

1959 Miller-Meteor Ambulance. La Mothe Cadillac.

@michaelmackenzie336 3 жыл бұрын

I want one of these. I love this car

@Meanwhileinthemancave 3 жыл бұрын

Thanks for watching! Hope you have a happy New year.

@jtuttle11 10 ай бұрын

You ALWAYS open and inspect for damage BEFORE you sign the receipt and send the delivery driver on his way!

@Meanwhileinthemancave 10 ай бұрын

Unfortunately the driver dropped off with no signature required we were lucky everything seems to work fine on the car now and it looks great in our Ghostbusters display. Thanks for watching!

@vadoraid2517 2 жыл бұрын

Wow.. this piece is amazing. I’ve got a cool echto-1 but it’s 1/12th scale. If I had room, I’d totally hunt one down.

@Meanwhileinthemancave 2 жыл бұрын

Eaglemoss has an Ecto-1 that looks pretty cool too. We had the 1/6 Ghostbusters so we had to jump on this. We were on pre-order for about 4 years. Thanks so much for watching and commenting we've really very much appreciate it!

@Tubester001 4 жыл бұрын

Try giving your front light bar a few good slaps. My rear light bar wasn’t spinning at first, but it seems it needed a couple good knocks to get it going. It’s been working perfectly since. Such an AWESOME piece. Totally worth every penny. Enjoy!

@Meanwhileinthemancave 4 жыл бұрын

You ROCK man!!!

@SuperAgentman007 Жыл бұрын

I’ve seen 1/6 scale models before I’ve seen a Ferrari and that cost around $30,000 due to the fact that it was metal and the detail to it and that it was built by a prestigious model building company as well as a limited production number. As a matter fact I remember seeing that also on Jay Leno‘s garage once i’m not that one that you have by that company but by a different model company. It’s up on KZfaq

@Guttalaser Жыл бұрын

I would have a lot of fun weathering and beating this shiny thing to get it really movie-correct!

@kreepyits-o7761 Жыл бұрын

Looks awesome 👌 what pisses me off is when you find a smaller scale of the ecto-1 they always forget the little blue round lights in the front and back on the roof

@Meanwhileinthemancave Жыл бұрын

Thanks for tuning in we really appreciate it!

@New_Jax_City Жыл бұрын

Looks like RAY STANZ was a damn DJ sitting back there working that madness. When someone asks you if your a god???? YOU SAY YES!!!!!!! Hahahha

@Meanwhileinthemancave Жыл бұрын

True that! 😂 Thanks for watching!

@michaelwood4661 2 жыл бұрын

So cool my partner loves ghostbusters she has the movies 1+2 and official license tee so far

@Meanwhileinthemancave 2 жыл бұрын

Thank you for watching!

@stanleybaker1520 4 жыл бұрын

He slimmed me,I feel so funky🤪🤪

@Meanwhileinthemancave 4 жыл бұрын

Someone brought a cougar to a party and it went berserk 😆

@chasedixon320 Жыл бұрын

Good lord that thing is huge

@Meanwhileinthemancave Жыл бұрын

Thanks for watching and Happy Holidays!

@LoganMagee Жыл бұрын

I love the Ecto-1

@Meanwhileinthemancave Жыл бұрын

We do too, thanks for watching!

@snakebandit 4 жыл бұрын

"I did not think it was gonna be this big". That's what she said. SORRY! i couldn't resist :-)

@Meanwhileinthemancave 4 жыл бұрын

LoL!

@pgdmed Жыл бұрын

The best part of this video is you have the best wife! She shares your enthusiasm even if it may not be her thing. Mine would have divorced me if I bought something like that. I live vicariously through you.

@Meanwhileinthemancave Жыл бұрын

Thanks for the kind words and thank you for watching. Happy Holidays!

@davesmancaveirl 9 ай бұрын

Great video, know it’s along time ago but did you manage to fix the issue with the front lights

@Meanwhileinthemancave 9 ай бұрын

Yes, thanks for asking. It was actually an easy fix, there was a little bit of plastic flashing on the gear. It runs absolutely fine now. Thanks so much for tuning in!

@tyymclarenfan 4 жыл бұрын

The roof rack system is hidden in the top cover to the right of the instruction book 👍

@christianjosephkarner Жыл бұрын

Thats huge!

@Meanwhileinthemancave Жыл бұрын

Moving the model through a doorway or stairwell is very awkward. Thank you for watching!

@mr.mirchenstein6549 3 жыл бұрын

WOW 👻 This looks amazing! I'd love to have one of these bad boys. Next best thing to owning a real driveable one lol. How much this set you back, if you don't mind be asking?

@Meanwhileinthemancave 3 жыл бұрын

The secondary market is the only place that have seen them now and the price is now outrageous. Thanks so much for watching!

@Jordizzan Жыл бұрын

This is cool as hell

@Meanwhileinthemancave Жыл бұрын

Thanks for tuning in and happy holidays!

@amj Жыл бұрын

Beautiful miniature, the problem is that the originally white plastic solid with the passage of time exposed to natural or artificial light, it turns yellowish.

@superharrisonxd-o-rama3163 Жыл бұрын

18:30 Actually it was both an ambulance and a hearse. It was an old combo car. They don’t make them anymore though

@Meanwhileinthemancave Жыл бұрын

Happy holidays and thank you for watching!

@BloodyBamPot Жыл бұрын

Cool I’ll get one for my 6 year old . My 13 year old is already too old . Yep

@Meanwhileinthemancave Жыл бұрын

Never too old for Ghostbusters stuff... Thanks for watching!

@Mekazas Жыл бұрын

Neato, I would take the non working light bar off and unjam the gearing to make it work. It was obviously mishandled during shipping.

@Meanwhileinthemancave Жыл бұрын

We got it working there must have been some plastic flashing in the gears and they work fine now. But you are right that box looked like it went through a tornado. Thanks for watching.

@user-qi4nl9hh6j Жыл бұрын

It was actually an ambulance Hurst combo you could use it for either or

@Meanwhileinthemancave Жыл бұрын

Grim but True! Thanks for watching!

@dennish4304 3 жыл бұрын

Is there a vinyl sticker covering the two curvy rear tail light sections? Near the silver tail light trim. They originally mistakenly left the section White and corrected it with a red sticker. I'd rather them just leaving it White since the vinyl sticker might peel in the future. All that beautiful detail and someone put the front license plate on crooked.

@Meanwhileinthemancave 3 жыл бұрын

I think your right. I never noticed that before. Thank you for watching and the information!

@a68k_de Жыл бұрын

wow that's a huge monster ;-) you really need the space for it haha Amazing and alll the details ... ok 4k ... but you get something for that money! yeah agree, the dash should be lit ... may be you can add this did you fix the front turning lights?

@Meanwhileinthemancave Жыл бұрын

We did fix the turning lights. One of our viewers had the same issue and a few gentle taps must have knocked away some flashing or something and it's worked fine ever since. Luckily we didn't even come close to paying 4k but we had to wait years to get it. I did see that they are going for that much now, ouch. It is a beast, it barely fits in the shelf we put it in. Thank you for the support!

@Slimyousri 3 жыл бұрын

Awesome👊👊👊😎😎😎

@Meanwhileinthemancave 3 жыл бұрын

Thanks for watching!

@Slimyousri 3 жыл бұрын

@@Meanwhileinthemancave you're very welcome👌👌😎😎😎👍👍

@tripyramidpictures9224 Жыл бұрын

It already has a ghost in it!

@Meanwhileinthemancave Жыл бұрын

LoL We did get the front lights spinning they just must have had some plastic flashing on the gear. Thanks for watching,!

@Michigunner 4 жыл бұрын

Some other youtubers said sometimes have to wait a bit before they start spinning

@Meanwhileinthemancave 4 жыл бұрын

We left it for a while but still nothing...

@erickbrown4695 Жыл бұрын

How much do they cost approximately with all the figures?

@Meanwhileinthemancave Жыл бұрын

I don't know of any place where you can get the figures anymore outside of the secondary market. I've been hoping for a rerelease for years so I can get Winston and Slimer. The Ecto-1 is getting a rerelease but the price is jacked way up it's on Big Bad toy store. Thanks for watching!

@user-wl7um5rp4h Жыл бұрын

hello. It is currently on sale at a Japanese net auction for US$3411. how much was it when you bought it.😄

@Meanwhileinthemancave Жыл бұрын

Less than half that price thankfully. Wow 😮. Thank you so much for watching!

@chellej911 Жыл бұрын

WOW!

@Meanwhileinthemancave Жыл бұрын

Thanks for tuning in!

@viknzilla8625 3 жыл бұрын

box : do not use blades to open ! Everyone : im using a blade.

@Meanwhileinthemancave 3 жыл бұрын

LoL So true! Thanks for watching!

@zombrakinze.3610 4 жыл бұрын

Wow it’s pretty sick “Ecto1” Question How much did you paid for it!?

@Meanwhileinthemancave 4 жыл бұрын

They are getting in shorter supply now so I noticed places have started jacking the prices up. Sideshow I think is about the cheapest right now but it's a waiting list. www.sideshow.com/collectibles/ghostbusters-ecto-1-ghostbusters-1984-blitzway-903261 Thanks for tuning in!

@zombrakinze.3610 4 жыл бұрын

Meanwhile in the man cave thanks!!

@robertshabarekh610 Жыл бұрын

JUNK!😂

@richardvyse6975 Жыл бұрын

I have one but how do you get the MP3 player to work?

@Meanwhileinthemancave Жыл бұрын

You have to use a USB cable and power block you do need the sounds you want on a Memory card though.

@jamesshirrell3677 3 жыл бұрын

Cool were did u find it

@Meanwhileinthemancave 3 жыл бұрын

I put it on preorder as soon as it was announced. If I remember correctly we waited almost 3 years. Thank you very much for watching!

@DeanPorterEsq 2 жыл бұрын

Do you have a link of where we viewers can buy it to build ourselves?

@Meanwhileinthemancave 2 жыл бұрын

It's only available in the secondary market now.

@DeanPorterEsq 2 жыл бұрын

@@Meanwhileinthemancave as in fully made or unmade so as a buyer I can make?

@Meanwhileinthemancave 2 жыл бұрын

@@DeanPorterEsq These come mostly together with just minor assembly required.

@andrewcroasmun9155 3 жыл бұрын

As I say on others, imagine if they do an Ecto 1A?? That would be one heck of a model too.

@Meanwhileinthemancave 3 жыл бұрын

That would be cool but I don't think they will I think the production on this one was much more difficult than they had planned. Im hoping they release some slimed Ghostbusters figures so I can get my Winston finally. Thanks for watching!

@andrewcroasmun9155 3 жыл бұрын

Meanwhile in the man cave absolutely, but just wish upon a Star and it may happen.. I just want to see it, I can’t afford to get divorced by even buying Ecto 1.

@Meanwhileinthemancave 3 жыл бұрын

@@andrewcroasmun9155 LOL!

@PB-420 Жыл бұрын

Very cool. But wheres Winston?

@Meanwhileinthemancave Жыл бұрын

Wanted the pack that had them all and the 1/6 Slimer, but the place I got them only had the Doctors you can't find those two anywhere without them being outrageously expensive on the secondary market if you can find them at all. Hopefully Blitzway will rerelease them or Hot Toys will make them so we can finish the set. Thank you for watching!

@mooseyman74 4 жыл бұрын

Good vid 👍🏻 no Winston though?

@Meanwhileinthemancave 4 жыл бұрын

They were sold out and he is so expensive on the secondary market. I'm holding out for a re-release 😢 Thanks for watching!

@mooseyman74 4 жыл бұрын

@@Meanwhileinthemancave I was just wondering because they were sold in sets of three or four. I always kind of think of the original trio because they form the business while Winston has no interest in the supernatural and just wanted a job.

@Meanwhileinthemancave 4 жыл бұрын

@@mooseyman74 I'm glad I have the 3 we have but it would be nice to have the complete set! We need a slimer as well!

@mooseyman74 4 жыл бұрын

@@Meanwhileinthemancave and a Rick Moranis... and Zuul.. and a terror dog.... and the firestation... (I wish 😁) Blitzway did a great job with these!

@slavamaksakov2043 3 жыл бұрын

He’s racist

@donivanpotter2762 Жыл бұрын

Considering the model. It would have been a cool thing if the maker has snuck in a voice recording to the small phone of the four characters saying something just as a surprise to some lucky buyer. Cool model though.

@Meanwhileinthemancave Жыл бұрын

Thanks for checking out our channel!

@triplec1131 Жыл бұрын

Why don't the front light bar spin like the back?

@Meanwhileinthemancave Жыл бұрын

We fixed it there must have been a piece of flashing in the gears. We had one of our audience that had the same issue and said he just tapped it a little to get it to start. Tried it and it has not been a problem ever again. Thanks for watching!

@raynekraven 2 жыл бұрын

at 1300$ you would think you'd have something without issues were you able to fix them?

@Meanwhileinthemancave 2 жыл бұрын

Yeah there must been some plastic flashing in the gears that run those lights that came out, they work fine now. Thanks for watching!

@raynekraven 2 жыл бұрын

@@Meanwhileinthemancave your welcome! glad to hear all is good.

@Meanwhileinthemancave 2 жыл бұрын

@@raynekraven We should have a cool Slimer unboxing on here soon. We have been waiting on it for over a year. Again thanks for watching we really appreciate the support!

@MorsDengse Жыл бұрын

"Look how big it is, compared to my arm" Well, dont think I need to add anything to that.

@Meanwhileinthemancave Жыл бұрын

😂 😂😂

@brandonpierce5507 3 күн бұрын

That's looks like the same car they used on the first Ghostbusters movie

@Meanwhileinthemancave 3 күн бұрын

It is. We don't have the afterlife version.

@HughsReviews 4 жыл бұрын

Is this a metal body or plastic?

@Meanwhileinthemancave 4 жыл бұрын

Plastic

@tyymclarenfan 4 жыл бұрын

Gently tap those rotators, as they should start spinning

@Meanwhileinthemancave 4 жыл бұрын

One of the other guys on here suggested that too and they have been working ever since 👍

@tonypodowski5818 4 жыл бұрын

Very good review ,hope you get the lights stored out, I am very concerned about delivery damage, in particular my one has to travel to UK with over $500 delivery and tax payment I would expect a premium service and no damage on delivery.

@Meanwhileinthemancave 4 жыл бұрын

The shipping box was trashed but the inner box was fine. This one had to travel across the US from the West coast to the East coast by ground so you're vehicle may not have to go through as much handling as ours did. Thank you for taking the time to watch we really appreciate it!

@michaelchristianson3179 Жыл бұрын

I would do an RC conversion.

@Meanwhileinthemancave Жыл бұрын

That would be amazing! Thanks for watching!

@festivalgeoff Жыл бұрын

How much did it cost?

@Meanwhileinthemancave Жыл бұрын

They are releasing it again but at a much higher cost believe they have them on big bad toy store.

@katelin_mgood Жыл бұрын

No siren?

@Meanwhileinthemancave Жыл бұрын

Had to use the installed mp3 player for that . Now it does the siren and Ghostbusters theme. Thanks for watching!

@jacobfeinstein4402 Жыл бұрын

Wher did you get that

@Meanwhileinthemancave Жыл бұрын

We had it on order for at least 2 years before it even shipped so it's hard to remember. We were starting to doubt it was ever going to come out at one point. It was kind of the same thing with the life size wall mount Slimer we have on the station that was about 3 years if I remember right. Thank you for tuning in!

@garyhallsworth5029 Жыл бұрын

Where can you buy this model from

@Meanwhileinthemancave Жыл бұрын

They are releasing the Ghostbusters Afterlife version next year sometime. Thanks for watching!

@themilkman1188 4 жыл бұрын

suprised they didnt use the shiny plastic for the chrome

@Meanwhileinthemancave 4 жыл бұрын

I thought that would bother me but it looks pretty good in real life it just looks unpolished.

@chasedixon320 Жыл бұрын

How much did that cost

@Meanwhileinthemancave Жыл бұрын

Not even 1/8 of what they are going for now. But we waited for it for almost three years.

@DarkWolf-et3dx Жыл бұрын

where is the winston figure? and where is slimer?

@Meanwhileinthemancave Жыл бұрын

They came in a multi-pack and the place I got them didn't have that pack now Winston and Slimer are priced so crazy on the secondary market it's crazy. Only hope is a rerelease or Hot Toys making them. We did unbox a stylized version of Slimer on the station that is close to that size. Thanks for watching!

@topbanana4013 4 жыл бұрын

. i have seen other users complain about the fittings very lose and they use glue! or blue tack to hold in place. only turn off to me it looks to toyish , it needed some metal in there even the blue pipe is solid plastic. auto world model is fabric and bends, yes its only 1.18 but something this price ??? , and also to big for most people, might as well get the real thing store in a garage as a project lol

@Meanwhileinthemancave 4 жыл бұрын

Lol you do have to plan for it like a piece of furniture. Thanks for watching! If you're a Ghostbusters fan we did a video for the terror dog bust as well.

@princeknight1620 3 жыл бұрын

They should put the horn thsts like the main event

@josealvarado2564 Жыл бұрын

Dónde puedo comprar uno igual o algún otro modelo o nave.

@Meanwhileinthemancave Жыл бұрын

These have been out of production for a few years but they are doing a Ghostbusters afterlife version of the same scale at some point. I think it is available for preorder on Blitzway. Thank you for watching!

@pasqualetripodina5995 Жыл бұрын

Oooommmgggggggggg❤❤❤❤❤❤

@Meanwhileinthemancave Жыл бұрын

We love it too. Never thought they would come out with one in that scale. Thanks so much for the support!

@snextime Жыл бұрын

I like how the box was already pre opened and badly taped back up 1:35

@Meanwhileinthemancave Жыл бұрын

I think it may have started to pop open in shipping and somebody tried to seal it back up. That box had taken a beating before we got it. Thanks for watching!

@colingarner6175 Жыл бұрын

Nothings up !!!

@Meanwhileinthemancave Жыл бұрын

😆 Thanks for watching!

@ChilesRussellTaylor Жыл бұрын

For Ivan Reitman & Harold Ramis. R.I.P.

@Meanwhileinthemancave Жыл бұрын

Thank you for tuning in!

@buster5661 Жыл бұрын

i dont know how this is going to compete with your lightning McQueen tv

@Meanwhileinthemancave Жыл бұрын

😂😂😂

@MADMAX-rj3uw Жыл бұрын

id upgrade the lights, and turn it into a R/C version, that would worth the $1900

@Meanwhileinthemancave Жыл бұрын

Thanks for watching!

@JoshuaModerwell Жыл бұрын

Who else is also excited for the ECTO-1 based on how it was seen of Ghostbusters: Afterlife coming soon from Blitzway?

@Meanwhileinthemancave Жыл бұрын

Cool idea but no way I'd have enough room for another one! Thanks for watching!

@JoshuaModerwell Жыл бұрын

@@Meanwhileinthemancave I have seen photos of the Afterlife ECTO-1 prototype through Google Images. I hope you'll find a way to make room for it. Blitzway should also have 1/6 scale action figures of Peter Venkman, Ray Stantz, and Winston Zeddemore made to look like how they had appeared of Ghostbusters: Afterlife in the likenesses of Bill Murray, Dan Aykroyd, and Ernie Hudson in their old age to display with the old, beat-up ECTO-1.

@Meanwhileinthemancave Жыл бұрын

@@JoshuaModerwell They also need to rerelease the younger versions so I can get Winston and Slimer to complete my set.

@JoshuaModerwell Жыл бұрын

@@Meanwhileinthemancave I was wondering why the figures of Winston and Slimer weren't also included of this review of the Blitzway ECTO-1.

@Jamester2 Жыл бұрын

no siren sound?

@Meanwhileinthemancave Жыл бұрын

We have it on the built in mp3 player along with the Ghostbusters theme song. Thanks for watching!

@joelsavage_yt1182 3 жыл бұрын

We’re can you get one

@Meanwhileinthemancave 3 жыл бұрын

I think they are only on the secondary market now.

@hiramrivera2140 3 жыл бұрын

Tap the light

@Kal824 2 жыл бұрын

No love for Winston? Hmmm

@Meanwhileinthemancave 2 жыл бұрын

We haven't been able to find him or Slimer from Blitzway on the secondary market for a reasonable price so we are hoping Blitzway will do a re-release in the future. We have him in a pop figure that we still have to unbox but we weren't even able to get the Soldiers story version that came out. Thanks for watching!

@Kal824 2 жыл бұрын

@@Meanwhileinthemancave Ahhh. I see. I showed my wife this video, and she asks me "How much does it cost?" And I replied "Does it even matter? Are you seeing how big she is? In our current living situation, I wouldn't even have a good place to put her". I can't even imagine where you've found a spot to put her, lol.

@Meanwhileinthemancave 2 жыл бұрын

We are building a cabinet for it...a really big cabinet out of MDF and Plexiglass. Hopefully it comes out good. I did some for our 1/18 Tanks years ago and want to do something similar. Thanks for watching!

@pbisbad 3 жыл бұрын

No Winston?

@Meanwhileinthemancave 3 жыл бұрын

The place I got them from didn't have him in stock and now he is so darn expensive on the secondary market we can't touch him. I'm hoping another company does a set so we can pick him up. We only have him in a pop figure right now.☹️

@robertzieg3893 Жыл бұрын

According to the instructions you have the hose clamps reversed.

@TZAG Жыл бұрын

And what's the price of it?? It must have cost as if it's the real busters car.

@Meanwhileinthemancave Жыл бұрын

It is for the rerelease but the original was reasonable. I had to wait over three years to receive it though. Thanks for watching!

@michaelodoherty8893 Жыл бұрын

I've got 1, JUST 1 Question... MUCH?

@Meanwhileinthemancave Жыл бұрын

I will tell you it was about a quarter of what they are going for now. But I think it was about 2 years of waiting. Thank you for watching!

@billy1673 Жыл бұрын

I’m betting the money you spent on this, you could’ve bought a real ‘58 caddy ambulance.

@Meanwhileinthemancave Жыл бұрын

Not then but if you wanted one now that would be about right. They have inflated the price so much for the re-release. We waited 3 years for it from some place originally and thought we would never see it. Thanks for watching!

@MrMalfador65 3 жыл бұрын

Embedded with Digital Audio Player with siren! so where is YR SIREN?

@Meanwhileinthemancave 3 жыл бұрын

It has a goofy setup that needs power from a USB cable and BYOD sound via a micro SD. It does work, just not particularly practical.

@SurvivingTheApocalypse 4 жыл бұрын

Its such a nice looking model, but the issues would just bug me too much. Some of the design decisions are just stupid. Even Playmobil could get the light bars right and their ‘toy’ cost $30.

@FFDGFDOFD 2 жыл бұрын

I don’t understand why they would have Lights that are supposed to be ON Steady FLASH! And Lights that are supposed to Flash be ON STEADY… Drives me absolutely nuts, all that work in the detail to fuck that up.. 🤣

@SovereignKnight74 3 жыл бұрын

I like it but not enough to pay $2,700 for it, yet alone figure out where to put such and unwieldly item! I'll settle for the 1:18 Hotwheels Elite Ecto 1 and Hasbro Plasma Series Ecto 1.

@Meanwhileinthemancave 3 жыл бұрын

The secondary market has inflated the prices so much!

@SuperAgentman007 Жыл бұрын

I believe that model probably cost about as much as a real Standard size car😮

@Meanwhileinthemancave Жыл бұрын

It didn't when we ordered it but with the way the secondary market is they do now. That's why we haven't been able to get a Winston or Slimer from this line. Hopefully they will remake them or someone like Hot Toys or Sideshow gets the license to make them in this scale. Thank you for watching!

@joeygaming2987 3 жыл бұрын

How much was that

@Meanwhileinthemancave 3 жыл бұрын

Too much! But we love it. They are going for way way too much now on the secondary market. Thanks for watching!

@johntaphouse5235 3 жыл бұрын

why even accept a box in that condition geez, and did you not see the "do not use blades to open",

@Meanwhileinthemancave 3 жыл бұрын

The inner box was fine and the process to return without opening after waiting so long was not something we were willing to do. We could've returned it if we opened it and found issues. As it is now everything works including the lights. There must have be some flashing on the gears from the molding process that was preventing the rotation. They work totally fine now.

@billy1673 Жыл бұрын

Where the hell is “Winston Zedmore” /Ernie Hudson???

@Meanwhileinthemancave Жыл бұрын

@MacGivre Жыл бұрын

C'est un corbillard à l'origine, pas une ambulance :p

@Meanwhileinthemancave Жыл бұрын

Thanks for watching

@gordonw9911 Жыл бұрын

Where is Winston??

@Meanwhileinthemancave Жыл бұрын

@neoone5942 Жыл бұрын

Where is Winston?

@Meanwhileinthemancave Жыл бұрын

The place we got them from didn't have him in stock and now he is so darn expensive on the secondary market we can't touch him. I'm hoping another company does a set so we can pick him up. We only have him in a pop figure right now.☹️ Or hopefully they do a rerelease. A company called soldier story did them as well but they are impossible to find at a reasonable price. The pack we wanted had them all in it and Slimer all they had were the Doctors. Thanks for watching!