GOING ALL OUT WITH MY DRIFTCAR ENGINE PART 1

Рет қаралды 64,442

6 жыл бұрын

the long awaited engine assembly video! I recorded so much detail into this that it turned out to be a really long video. splitting it into 2 or 3 parts to cover everything. some of you may have already seen it on Adamlz openhouse video. its alive and stronger than ever! took me a few days of straight working on it to get it done for the event. had to sacrifice uploading videos the whole weekend but it was a great turnout. was able to meet a lot of you there and had a ton of fun.
BE SURE TO CHECK OUT THE BIGBOOST MERCH
My STEERING WHEEL IS AVAILABLE AT
usperformancelab.com/products...
and shirts are available at
BIGBOOST MERCH: www.lzmfg.com/big-boost-v2-tee/
V1 shirt only a few sizes left www.lzmfg.com/big-boost-tee/

Пікірлер: 234

@TwInKiEmAn99 6 жыл бұрын

Your the only channel doing this full engine breakdown stuff. We love you.

@AllMyDaysFeelTheSame 6 жыл бұрын

Basile Bishop Nah man, carpassionchannel has the most detailed videos you'll find

@TwInKiEmAn99 6 жыл бұрын

Samiata sorry, I mean BMW m and s motors.

@joonatanaapa4626 6 жыл бұрын

there is also channel pazi88

@martijn826 6 жыл бұрын

Agreed with joonatan. Pazi88 has way more in depth videos on bmw engines

@HotboiEngineering 6 жыл бұрын

Jafromobile went to OCD levels of detail on his 4G63 build.

@richardhalley6895 6 жыл бұрын

Alberto very professional my friend great job in describing the parts . 👍🇦🇺

@SarahnTuned 6 жыл бұрын

That torque wrench! 😍

@ALBERTOBIGBOOST 6 жыл бұрын

best one money can buy. 0 regrets on buying it

@rubensantana8601 6 жыл бұрын

Sarah -n- Tuned bigboost could torque it downnn

@frontspring1 6 жыл бұрын

Sarah -n- Tuned do you even know what a torque wrench is noob

@tiffanydolby1912 6 жыл бұрын

Grab America by the Flaps what cus she a women she not ment to know get out of here with ur dumb ass comments

@frontspring1 6 жыл бұрын

Tiffany Dolby here comes the captain save-a-hoe crew checking in.

@TheKaziCo 6 жыл бұрын

so cool to see the process in depth, a lot of youtubers just cut all the detailed stuff out. keep up the awesome work alberto, hoping to see you winning some competitions soon!

@thegtagas 6 жыл бұрын

Best car guy on youtube. The only one who shows the whole process. And does it 3 times in few months

@BBBoiko2004 6 жыл бұрын

Alberto, add "E36 Engine assembly M52" on your title. That way, anybody looking for that tipe video, will find yoour chanal.

@wrldisyours3328 6 жыл бұрын

Do a few giveaways with the pistons. That would be kinda cool.

@tarikmoore3612 6 жыл бұрын

You are a great teacher and I think everyone else can contest to what i am saying your channel is very educational even if there is somewhat of an language barrier but you explain things to us common none mechanical inclined people, which we can understand and for me I am happy that I can learn from you that is why I subscribe to your channel

@akemesquire2287 6 жыл бұрын

Yeas the BMW is finally back in one piece #HardWork🖒

@ALBERTOBIGBOOST 6 жыл бұрын

thanks yeah it sounds soo good. you can see it at work in adams video

@kylewhiteley8655 6 жыл бұрын

Alberto sitting in a chair drinking coffee is just missing two things: a fancy had and a fireplace in the background

@ALBERTOBIGBOOST 6 жыл бұрын

i could set the washer machine on fire :)

@drumerboy456sx 4 жыл бұрын

I also though it was pretty laid back. Would be classier if you had a nice desk in the shop where you can sit at to give an intro to your videos

@jdob8086 6 жыл бұрын

Alberto after a haircut - "Allright i gotta get all the girls away from me now"

@ALBERTOBIGBOOST 6 жыл бұрын

loool

@Revedance2002 6 жыл бұрын

You gonna still keep KIKI on that Turbo D though, right?

@jdob8086 6 жыл бұрын

albertos gona be a dad?!?!? lol

@ALBERTOBIGBOOST 6 жыл бұрын

well that escalated quickly..

@numinous4789 6 жыл бұрын

Except for Kiki... amIright? :-D

@slashe346 6 жыл бұрын

I have the same torque wrench, and also love it. Just a little info for you, you don't have to torque zero or angle zero it other than before the first torque of each step. Also you don't have to wait for the display to stop flashing to do the next bolt torque, once its gone green beeped and vibrated it is ready for the next one. Always good content as usual

@slowrps13 6 жыл бұрын

I polish my own piston sometimes 🤔

@Xempt_One 6 жыл бұрын

BenniBenson yours is a 2-stroke aye?

@joeyg29jgjg 6 жыл бұрын

That comment and then the comment on the comment. I'm dieing 😂😂

@dr.5471 6 жыл бұрын

loving the videos Alberto keep up the good work!

@ALBERTOBIGBOOST 6 жыл бұрын

been working all weekend to get it done. then got to show it off at the open house yesterday

@dr.5471 6 жыл бұрын

You're a very persistence man lmao, wish I had as much motivation as you do

@rickeycallen 6 жыл бұрын

Those old pistons would be a cool giveaway item, they make for nice ashtrays, paperweights and you can use a full piston/rod combo to build a cool magnetic tig torch holder too

@HowlerBikeVlogs 6 жыл бұрын

as an m50/m52 enthousiast it's great to see a man with such amounts of knowledge do such an in-depth build. i'm pretty sure i will one day refer to this video when i'm building my own m52.

@czza2949 6 жыл бұрын

i would get much better sleep at night knowing i own a torque wrench as bad ass as yours lol

@Simon-bl8su 6 жыл бұрын

why is it bad?

@czza2949 6 жыл бұрын

NegativE badass not "bad

@Simon-bl8su 6 жыл бұрын

ahhh my bad bro xD

@18Elitegamer 6 жыл бұрын

Looking fresh with that cut. But Adams video already went up with spoilers you did it in two days. I swear you are like the hardest working youtuber. I want to rebuild an engine in two days correctly.

@ALBERTOBIGBOOST 6 жыл бұрын

hard to do especially filming everything too. if I had a camera guy it would be a lot faster

@metalfruttolo9855 6 жыл бұрын

Rebuilding an engine in two days is not impressive, but doing so while filming, moving cameras trillions of times and explaining all you do is very impressive indeed

@18Elitegamer 6 жыл бұрын

Kodiakcatdog hmm 🤔 i have a lot more to learn about cars. This is pretty interesting.

@ferguscruickshank4120 6 жыл бұрын

One of the best videos so far imo, keep up the good work, loved the sit down introduction as it somehow added a more professional feel to it and the new mic was great, looking forward to more videos

@developmentdivision122 6 жыл бұрын

you can put a rag over the cir-clip that holds in the wrist pin.. that way, if it tries to fly away, it hits the rag and stays on the table and away from your face!

@icee0711 6 жыл бұрын

I loved how detailed this videos is. You should do a giveaway with your broken pistons. I wouldn't mind having one.

@CJ-is4nb 6 жыл бұрын

Loving the new mic set up and the solid camera angles too, great informative video.

@luckylegs8547 2 жыл бұрын

Without these videos I’d be lost

@tomasburianek7131 6 жыл бұрын

The sountrack from Mousehunt in the backround of timelapse just made my day way batter. Great choice and keep going and growing man! Awesome work.

@robhawn2842 6 жыл бұрын

Your audio with the lapel mic I perfect now. Can't wait to see you shredding tires again bro! I'm certain this time it's gonna last you. I also can't wait to see the car with all the body work finished. She's gonna be perdy.

@TheAmazingKraken 6 жыл бұрын

Really enjoy the raw feel of your videos!

@jerryseebaugh231 6 жыл бұрын

Kiki will be happy.....lol

@DodgyBrothersEngineering 6 жыл бұрын

You shouldn't rotate the crank until you put the main caps are on and torque them down. All that achieved was to put assembly lube between the main cap and the block (bearing acts like a scraper). If you must rotate the crank to ensure it is seated properly move it back and forward a tiny amount, not rotate in one direction.

@Z32orDIe 6 жыл бұрын

Having polished piston tops is a performance mod it helps to reduce knock and the carbon buildup which in the end does equal power just not enough for people to notice but that is most definitely a performance by my friend and a good one that most people overlook I will be doing the same to my motor with my Pistons as well as the combustion Chambers in the heads will both be polished to a mirror finish that way carbon can never collect to the surfaces of the combustion chamber which will help to reduce the chance of knock or detonation

@Jmac7o7 6 жыл бұрын

I love how informative your videos are, keep up the awesome content bro!! Cheers

@tyewvarnes 6 жыл бұрын

Great vids! I always liked how in depth you go compared to other channels. Even better that your now working on the same motors as me! Good luck to you!

@REAPER0D 6 жыл бұрын

same thing with the timing cover on a 7m from a 3rd gen supra.... gotta have the block decked with timing cover on or you cant bolt the head down evenly and will constantly blow headgaskets

@Real_Richmond_510 6 жыл бұрын

Awesome step by step. This engine is going to handle the boost very well with forged pistons and forged bottom end. Bored over for less compression. Equals more boooossstttt!

@eloyoquendo8293 6 жыл бұрын

Good vid so far, and glad we got to talk at Adams warehouse

@fernandosalcedo4292 6 жыл бұрын

Alberto " you won't have an eye anymore"😂

@ZLK29 6 жыл бұрын

Dude the tracks you selected for this video had me cracking up! 😂

@AZ-Patriot 6 жыл бұрын

I got so excited when I heard Ravel’s Bolero Concerto start up early on. I thought you were going to throw it all together in a time lapse. Then you went and got all talky again.

@MrNicoe36cabrio 6 жыл бұрын

Nice video Alberto. Also great details. Keep up the good work. Regards from Holland!!

@dariussmith6997 6 жыл бұрын

Video was so clear!

@rubensantana8601 6 жыл бұрын

More videos like this big boost!

@blackinblue11 6 жыл бұрын

Must be a bloody good feeling to install Wiseco pistons with a forged rods in your own block:)

@armourshooter5517 6 жыл бұрын

Saw your car running on Adam's video, lit 🔥

@Ferr_ALV 6 жыл бұрын

Love your videos Alberto! Wish I could rebuild my KA for my 240 but i dont have the guts lol.. Keep up the good work 👍

@FarFromAvgJoe 6 жыл бұрын

I've heard polished pistons resist deposits better, no idea if it's true but it sounds possible. Smoother surface has less area for things to grab onto, just like buffed and well maintained clear coat keeps your car clean for longer.

@uscrunch 6 жыл бұрын

This video is gold

@ja51onpip 6 жыл бұрын

Its called a gudgeon pin (wrist pin) in the UK. Love the engine vids big boost.

@MyNameIssaSimon 6 жыл бұрын

21:00 When you're not sure if you dun goofed and are trying to press the pin from the wrong side 😂

@estebanquito356 6 жыл бұрын

33 minutes went so fast, nice video alberto!!

@Zakattack430 6 жыл бұрын

This was great!

@JeromeLimbourg 6 жыл бұрын

I love to see a giveaway with those pistons with maybe a autograph on it or such that would be awesome!

@devin4369 6 жыл бұрын

That BC hat is dope

@TreatsOnTheStreets 6 жыл бұрын

Fun to watch the rebuild! What do you think caused the ringlands to crack?

@mattwourms3726 6 жыл бұрын

Get the clip for wrist pin hooked with your pick and cover it with a rag. Should stop it from flying away

@sherwyn2581 6 жыл бұрын

Big boost n coffee!

@MultiTerpen 6 жыл бұрын

It is soo satisfying to see you build engines!! When are you gonna build the 2jz?

@randy80ism 6 жыл бұрын

What do you recommend to clean out the motor if it's all dirty when you do a oil change? Thank you for your videos they are great

@THECONDOR98 6 жыл бұрын

Technically you do gain something from polishing , it could potentially reduce carbon buildup/deposit which could lead to hot spots and premature ignition

@SERGMOTIVEGARAGE 6 жыл бұрын

polished pistons help prevent carbon build up on the tops as well, correct?

@onhawaii 6 жыл бұрын

The intake side is always colder then the exhaust side of the engine. And the inlet valve side of the pistons stay cleaner because the fuel air mixture hits it and vaporizes on the piston. Nothing to do with the break in of the engine... just after many miles it is not that obvious anymore.

@AlienInfamous 6 жыл бұрын

I want a Piston that would be so cool!!!!

@jzaDale 6 жыл бұрын

Don't know whether I missed it but shouldn't you have checked the gap on the main crank bearings? Love the in depth detail of your build.

@drakeweston1031 6 жыл бұрын

Dig the build man. When are you going to paint it?

@THECONDOR98 6 жыл бұрын

I am interested in perhaps buying one of those pistons if you’re not keeping them! I own a Bmw too and you’re an awesome inspiration. Been watching your channel since I met you own Adam Lz

@michaelc51388 6 жыл бұрын

Are you using tungsten rings to handle expansion and contraction?

@alexchulzhanov 6 жыл бұрын

Do you have a complete parts list of the engine components? Including the size of the turbo and all :)

@Kaidmz 6 жыл бұрын

Rest in peace buddy, 16:19

@KinigosGeorge 4 жыл бұрын

nice work alberto! i have a question for you.. at 24:23 of the video,wiseco tells us to have a gap of 0.0050 x bore .. why do you use the 0.21 mm ?

@SavouryLobster 6 жыл бұрын

You should live stream builds on twitch. That’d be nice, plus it allows live questions and answers. Or I guess you could use KZfaq too.

@meddial-mandhari9509 6 жыл бұрын

Great video big boost.. Try using a cloth on your hand to avoid the clip to fly

@jonathannavarro8978 6 жыл бұрын

Where can I buy those pistons and rods ? Also what bearings and head gasket are you using?

@johny79action 6 жыл бұрын

You should try putting a screwdriver inside the wrist pin, then it will hit the handle when it pops out :).

@catshaveearsonhead 6 жыл бұрын

What brand torque wrench is that, it looks great

@kingerikkillmonger1286 6 жыл бұрын

2 questions, 1. Why do u have to "gap" or grind the piston rings to a certain measurement. 2. U said to place the piston rings 180 degrees from each other, why not put the lining up the same why way? Great video and very informative

@samtalkington3442 6 жыл бұрын

Only one insect was harmed in the making of this film. RIP Jeffery, you will be missed. @16:19

@waaooo 6 жыл бұрын

sooo much work :) the takeaway from this is buy a stock 1jz or 2jz

@nhowards2 5 жыл бұрын

What is the part number on the pistons. Did you have to bore the block.

@DrPrutteklutt 6 жыл бұрын

Your a really nice Guy Alberto! greetings from Germany :-)

@appliedpressureextacts6083 5 жыл бұрын

Is this the m50 block or m52 block? You Mr. Big Boost along with Mr. LZ have inspired me to get into the drifiting scene. Im going to be building a 318 E30 and am trying to decide on a motor and trans combo to use. Any Suggestions?

@theFLORIDAman 6 жыл бұрын

Clean your feet thoroughly with rubbing alcohol and a paper towel before going out side and the mosquito won't bite as much if at all!

@RaxonRC 6 жыл бұрын

Is that a steel m50TU block or aluminium m52 block?

@Ricqu 6 жыл бұрын

Alberto, you were aiming between "blown race only" and "street moderate turbos/nitrous" with the piston ring gaps, but 0.19mm = 0.0075" and 0.21mm = 0.0083". So basicly they are looser than "Nitrous race only" or did i miss something?

@andybobandy641 5 жыл бұрын

Yes. I know... this is years old .....but I would love to know what ECU you are using to tune this beast!? What's your Management System now?

@michaelmichaelmotorcycle2174 6 жыл бұрын

This is why you do it right from the beginning so you don’t have to rebuild twice. The money for both builds could’ve been put together for one awesome build. Not hating tho you can still build an engine in 3 hours compare to me in 3 years

@ALBERTOBIGBOOST 6 жыл бұрын

hard part is having the money to build it

@a.taka_ 6 жыл бұрын

Videos like these make me debate if I should keep my m50 and rebuild it or just swap a 2jz in my e36

@ziptone779 6 жыл бұрын

Isn’t the oil squirter for the Cam chain?

@MyNameIssaSimon 6 жыл бұрын

The Run GTX works for cars and computer. Garrett GTX and Nvidia GTX

@camaro45rs 6 жыл бұрын

did you get a new camera? the video looks so crisp

@ALBERTOBIGBOOST 6 жыл бұрын

same camera. using better lighting and the lav microphone

@devlinbarnes287 6 жыл бұрын

Is the torque wrench snap on?

@TheMrhotrod 6 жыл бұрын

I can't remember for the life of me, are you running a m50 or m52 block?

@bengrams6289 6 жыл бұрын

Bigboost, you should send me a piston, thatd be dope!

@1knowsnothing1 6 жыл бұрын

6:50 bug crawls across bearing #2.

@nikosptheodorakis6871 6 жыл бұрын

Love the audio and angle shots !! Also next time put your mic's cable to the inside of your t-shirt that way it will not bother you...Keep up the good work!