How To Remove/Install a LEAKY/NEW SHUT-OFF Valve (Compression, Soldered or Push fit) | GOT2LEARN
Рет қаралды 1,626,167
Күн бұрынIf you have a leaky shut off valve, whether it's COMPRESSION, SOLDERED or PUSH FIT, here's how to remove and install a new one the CORRECT way!
Join my plumbing forum for FREE!
got2learn.freeforums.net/
Stuff I used in this video from Amazon:
Compression sleeve puller: amzn.to/3xD050e
1/2" drill brush tool: amzn.to/3jIV5SR
Bicycle wrench kit: amzn.to/3CzRu2f
Sharkbite depth gauge: amzn.to/2VAHqFK
Soldering heat shield: amzn.to/3F8SJWA
Pencil reamer: amzn.to/2tBuhKW
All-in-one deburring tool: amzn.to/3B9dLUv
Sharkbite video: • Beginners Guide To SHA...
INTRO - 0:00
WHY REPLACE ONE? - 0:23
TYPES OF VALVES - 1:12
COMPRESSION VALVE - 2:24
SOLDERED/SWEATED - 4:25
PUSH FIT - 6:22
DISCLAIMER: Got2Learn is NOT responsible for any damage done to a property of which the plumbing wasn't done by a professional, I do not recommend doing your own plumbing if you are unsure about what you are doing, always hire a LICENSED contractor when doing any type of plumbing so you can be covered by insurances if something does happen, these videos are for entertainment purposes only!
@commoncentstx 2 жыл бұрын
One thing I do to future proof supply valves in my house: I have a mix of compression and soldered supply valves around my house. When I replace one, I sweat on a male threaded fitting, and then I install a female threaded 1/4 turn supply valve. Using this method, I can get the benefits of the solid, reliable connection formed by the solder and threads, while still being easy to replace if necessary. I have had issues with both compression and shark bite fittings leaking in certain situations, but I always know I'll get a good connection with solder and threads, as long as the parts are not damaged. I want to renew mechanical aspects of my house in a way that will be easy to maintain and last a lifetime. That is why I started using this method.
@deathmerchant8662 2 жыл бұрын
I just wanted to let you know that I have been watching your videos for years now. Every one of them is spectacular. At first your first couple, you could tell you were a little more nervous. But I absolutely love them all. I like the fact that you don't show yourself pulling up in a truck and then explaining how this is your friend's house that you've known for 20 years. When im just Trying to figure out how to debur a pipe. So keep up the good work, make as many as you can because the world needs decent information. And Without a bunch hype. Because as you obviously know your work should always speak for itself and yours most certainly shows you have integrity. . Sincerely, Deathmerchant
@moonphasetoys Жыл бұрын
It's 1:30am and your video just saved my house from a flood. THANK YOU!
@Got2Learn Жыл бұрын
🥴👍
@lenharding72 5 ай бұрын
Great video, Glad it was the first one KZfaq search gave me. I have to remove a leaky soldered value and want to replace it with a compression fitting. Since I am just a DIY'er I like to confirm my knowledge before tearing things apart! You did a great job at that. I feel a lot more prepared and have a couple of new tricks that I didn't know before.
@Got2Learn 5 ай бұрын
Glad it helped!! :)
@beefjuicer4808 2 жыл бұрын
You are the apprentice of the plumbing gods. Phenomenal work dude.
@Got2Learn 2 жыл бұрын
Thanks man!
@johng9562 2 жыл бұрын
A big THANK YOU for your channel ~ you have taught me everything I know about soldering copper pipes. I have already managed to do a few repair jobs on my own house for a fraction of what a plumber would cost.
@Got2Learn 2 жыл бұрын
💪💪💪🙏🙏🙏
@richardmay1961 Жыл бұрын
Great video helped me out a lot. My local hardware stores didn’t carry compression sleeve pullers. Was able to pull the sleeve off with just a pair of channel locks pliers. Thanks again. 3:36
@alext8828 Жыл бұрын
Always great videos..and always room for suggestions. When removing a soldered valve, take out the valve stem and just warm up the valve body only. A little light pulling pressure on the valve will tell you when it's ready to leave. You'll need much less heat if the valve is disassembled first. On the press-fit valves; the escutcheon can be used as the removal tool by just pulling it forward to the valve. The use of low temp solder is wise. As is the use of eutectic solder.
@johnnypham3410 Жыл бұрын
OMG! You're amazing. You just save me some headache and having someone to do it for me for the compression valves. Thank you.
@briankeys9313 Жыл бұрын
Thank you! I was able to replace soldered valve with a new compression valve. Your presentation was well communicated to include the pipe insertion depth chart. I was in and out in less than 30 minutes!
@Got2Learn Жыл бұрын
Awesomeeee!!!
@T.E.P. 2 жыл бұрын
this is def one of your masterpieces of a video. and they are all incredible. can tell you love making the vids and sharing your experience. TIME STAMPS RULE!!! U RULE TOOO!
@Got2Learn 2 жыл бұрын
Wooohoooo ⚡⚡⚡⚡
@davidpierce9065 2 жыл бұрын
I like your accent. I've always just damaged and replaced the escutcheon. I didn't know that tool existed. I always suggest replacing a ball valve with a quarter turn shut-off. It's the modern way. Great Sharkbite tips.
@DL101ca 2 жыл бұрын
A ball valve is a quarter turn valve. What you're referring to is a gate valve.
@davidpierce9065 2 жыл бұрын
@DL You are correct; I did mean ball valve over a gate valve. Thank you.
@lolinpinguin Жыл бұрын
I love your username “davidpierce9065”
@tinali9200 5 ай бұрын
@@davidpierce9065sorry he is married. No more “like your accent” flirting needed lol
@sarahnei9030 5 ай бұрын
@@tinali9200 What a weird ass flex 2 years later. Gain some confidence in your relationship then you don't have to post weird comments 2 years later.
@gordonjustin4787 Жыл бұрын
I liked this presentation ! It covered different types of Shut-Off Valves that I never knew about in detail. Thank You !
@Got2Learn Жыл бұрын
Thanks Gordon!!!
@damianpokoj1065 2 жыл бұрын
As always - good, thorough explanation and no fluff. Thanks!
@givennameidk4515 2 жыл бұрын
Thank you for these plumbing videos please keep them coming .I really enjoy them .
@Got2Learn 2 жыл бұрын
🤘🤘🤘
@laumuseka 2 жыл бұрын
This is awesome! I literally just recently found one of these valves that needs to be replaced because it’s seized, and I need to replace that toilet. I didn’t even know they used compression fittings or had a tool for that. You saved me probably two or more trips to the store! Legend!
@Got2Learn 2 жыл бұрын
Awesome!!!!!
@johnepperson8867 2 жыл бұрын
This guy is so AWESOME !!! I've learned so much about plumbing from him. Plumbing has become a hobby for me, it's so intriguing.
@rosacuore15 2 жыл бұрын
Me too 🙂 We had a pipe leaking last December, couple days before Christmas. I put a bucket under the pipe, shut the cold water off, then called my husband to let him know to call the plumber. While waiting for plumber , I began searching on KZfaq and came across this channel; watched few videos for about an hour, then decided to drive to Home Depot to get shark bite, copper tubing cutter, and caliper to measure the pipe. I was like; okay I ‘ll give it a shot , if I screw up the plumber will come over, anyway. Few hours later, when the plumber came in, I was told, the pipe it’s fixed for few months. And of course, I decided to create a notebook for plumbing stuff, purchased some tools and keep on learning from this channel. I know it’s not a job for women, as well as carpentering, electronic stuff ( learned how to..from KZfaq) but I don’t care, because I can save thousands of dollars and make money 💰 too. 😁
@johnepperson8867 2 жыл бұрын
@@rosacuore15 GOOD for you Ramona !!!! Pretty soon the plumbers will be asking you for advice 😊😊😊. Sure, plumbing is for woman too. I don't see a lot of women plumbers on KZfaq, I do see a lot of really good women in carpentering and have learn from them on that craft. Take care & keep on saving money on plumbing, we both probably do a better job then a lot of "pro's" since their more into quantity then quality. Homeowners are into QUALITY since the fix belongs to us !!!
@windsofmarchjourneyperrytr2823 Жыл бұрын
@@rosacuore15 I'm bothered by that. Why not "for women?" I've heard this about drums and they don't realize WOMEN (priestesses) were the very first drummers.
@davidg4288 2 жыл бұрын
Nice pointers on the compression type and the push on type! For the solder type I'd recommend removing the stem first to avoid overheating the seat washer and packing washer.
@tubefr71 2 жыл бұрын
Wow was replacing in my kitchen a compression shutoff valve today and your video was thorough and super useful. Thanks!
@Got2Learn 2 жыл бұрын
Glad it helped!
@DMEN34 Жыл бұрын
Perfect video instructions! Just what I needed. Thank you!
@SB-jv6ie 2 жыл бұрын
Thanks for this great video. You are so clear and so detailed. Much appreciated!
@samsen3965 2 жыл бұрын
Thanks for sharing the knowledge, so clear and neat.
@sovereigntyplumbing9339 2 жыл бұрын
I always learn something new watching other professionals do their job #staymeek
@WJHandyDad 2 жыл бұрын
another great video. I knew a lot of this but I always learn something from your videos!
@Got2Learn 2 жыл бұрын
😇😇😇
@DallasBoricua 2 жыл бұрын
Never knew anything about these valves. Thanks for sharing.
@GunnyPhillips 8 күн бұрын
Excellent tutorial. Wish I'd found it sooner but I definitely feel better prepared for future work.
@milesharlan1 2 жыл бұрын
Thank You, Thank You...I always find your videos educational!! Keep up the good work!
@Got2Learn 2 жыл бұрын
🙏🙏🙏
@64arguz 2 жыл бұрын
Exactly what I was searching for 👍
@sanurshenoy5739 Жыл бұрын
Superb video explaining different types of valves used and method to remove/replace each type. One of the best how to DiY videos I have seen. No unnecessary drama/rant. Minimalistic approach but fully adequate. Thanks and add more videos for the DIY guys like me.
@Got2Learn Жыл бұрын
😇🙏
@akyl109 9 ай бұрын
W
@jacobsandoval9970 2 жыл бұрын
Great video! I usually replace multi turn stops with quarter turn
@Got2Learn 2 жыл бұрын
Yes 100%
@nickgulizia4681 2 жыл бұрын
OMG THANK YOU FOR THIS CHANNEL! I’m a Maryland apprentice this is amazing thank you!
@Got2Learn 2 жыл бұрын
😇😇😇😇😇
@fredsasse9973 Жыл бұрын
As an experienced DIY'er I thought I'd not learn a thing from this video. However, I never knew a ferrule removal tool existed! Thanks!
@Got2Learn Жыл бұрын
🙏🙏🙏
@tsetendorjee9040 Жыл бұрын
This is an excellent KZfaq of the How to Remove or Install show and we love it very much ! Thank you very much !!! 😍❤👌
@Got2Learn Жыл бұрын
🙏🙏🙏
@cfb8960 13 күн бұрын
Thank you thank you thank you. That tool advise was amazing for the compression fitting. You saved me a couple of hundred buck. God bless you.
@townman1 2 жыл бұрын
Good tutorial, thanks for explaining the compression valve type.
@Got2Learn 2 жыл бұрын
🤘🤘🤘
@DripsOne 2 жыл бұрын
Hey man sad that there are no new videos - just found your channel and as a german it is really interesting to see how you guys do stuff over there
@TB6491 Жыл бұрын
Excellent! Thanks for making this video!
@tonym6920 2 жыл бұрын
Great video, very informative, thanks! 👍👍
@lynnwestfall3078 Жыл бұрын
Excellent presentation and informative!
@camom494 Жыл бұрын
The multi turn valves you can rebuild those. You can get new seals and nylon stem at a hardware store. I would try that first before replacing. Great videos as usual keep it up 👍🏼
@donsmith9478 Жыл бұрын
Yep. My under sink kitchen shutoffs were replaced this way. I removed the innards and replaced them with those from new valves bought at the big box store. This was instead of replacing only the washer that had started coming apart and pieces were ending up inside my faucet ceramic valve. Since they were both about 20 years old, I replaced both hot and cold while the water was off. The quarter-turn innards would not close completely, so I used the multi-turn valves.
@rzh3443 6 ай бұрын
Absolutely. $2.98 for the kit at the Depot. Lot cheaper and easier.
@daddydawg1902 2 жыл бұрын
Thank You so much for the link to this. THIS is the video I have been searching for!
@Got2Learn 2 жыл бұрын
Glad it was helpful!!!
@jtfox8851 2 жыл бұрын
Ur videos are so good please never stop making plumbing videos
@timothycort228 Жыл бұрын
Great instruction video right to the point and easy to understand
@Got2Learn Жыл бұрын
Glad it was helpful!!!
@celsoampy5425 9 ай бұрын
Very explained!. Your tutoring how to do it very well illustrated and simple and direct.
@Got2Learn 9 ай бұрын
I appreciate that!!!
@juans6639 Жыл бұрын
EXCELLENT INFORMATIVE LANDSCAPE VIDEO.
@insanecomicdude 9 ай бұрын
Super helpful and great explanation. Thanks!
@moxnix 2 жыл бұрын
I hired a local tile company to demo and retile my second bathrooms. My first bathroom I did the demo and their install went great. The second not so great, another crew. One of the demo guys cut my copper pipe off to the remove a sink value. I told him "You shouldn't have cut the copper line, all you had to do was unscrew the fitting and slide it off. Plus I had told the tile company that I would take of the sink and toilet plumbing, as I did in their last tile job. They also tried to charge me for their plumbing issues. I guess a lot of people that don't know anything about construction are taken advantage of. I thought they knew that I did part time construction consulting and had worked with a home inspector.
@oldpossum57 9 ай бұрын
Très content, parce qu’un canadien français profite de YT pour instruire le monde. Bravo!
@jkwo2007 Жыл бұрын
very clearly explained, Thank you very much for sharing.
@walterpavon4788 2 жыл бұрын
I learn a lot with your videos Thank you for sharing your knowledge Walter to Argentina
@Got2Learn 2 жыл бұрын
👌👌👌
@johnmurphy9688 Жыл бұрын
Thanks buddy. I've learned a lot about plumbing and other tricks from watching your channel. Keep up the good work my friend👍
@user-vt7kg3bp4f 10 ай бұрын
Thanks for showing me how to remove the compression nut. You even impressed the folks at the local hardware store who wanted me to saw the pipe to get the nut off. That would have created even more headaches. 4:18
@gpraceman Жыл бұрын
I've tried to use ferrule ring pullers, but some refused to budge and just dug into the pipe. I ended up getting a Dickie Dyer "Olive Splitter" and that makes quick work of it on any size piping. Though, I could only find such a tool in the UK, so there was the added shipping cost to the US.
@artyzinn7725 2 жыл бұрын
I love your vids, so clear, well described, quick. It teaches me one thing , I'll pay the plumber, he's or she's worth it.
@Got2Learn 2 жыл бұрын
😇😇😇
@fredrickbaker5262 Жыл бұрын
Great content, very good video and great information shared. Thanks.
@Sam-ey1nn 2 жыл бұрын
Can I suggest a few topics for a future video? PVC fittings, how PVC sizes work (inc. schedule 40/80, etc) and how they compare with the DIY polypropylene crap home stores sell for DIY. I've found there is very little good information on these subjects available.
@cusimilooking4965 Жыл бұрын
I used some high potency vinegar to clean the copper tube out let just so that the copper ring would slide of. It took a few minutes..Thank u Lord cause I did not want to return to the hardware store to purchase a puller. The ring was loose between 2 millimeters but would not go up or slide done. Loose enough but maybe some very small particles was not letting it slide off. Thank u.
@j.arevalo4461 2 жыл бұрын
Thank you, very well explained!
@Got2Learn 2 жыл бұрын
🤗🤗🤗🤘🤘🤘
@PlumbingExplained 2 жыл бұрын
The Ferrule blaster is the best tool to remove ferrule's, The olive puller is cool so are some of the other pullers but theyll either break or stretch the pipe when theyre really corroded on.
@dyrectory_com 2 жыл бұрын
Thanks for the video! 👏🏻
@wincychan7791 Жыл бұрын
Very useful information 👍🏻
@kevin7151 2 жыл бұрын
Very good and informative video. Thank you for putting this out there for your viewers. There is another alternative to consider that I do in my own home. I have replaced these kind of shutoff valves with quarter turn FIP valves. These turn into a chrome pipe nipple which then turns into brass drop ear elbow that sits behind the wall. I prefer this installation as the elbow can be anchored behind the wall resulting in no movement when installing the pipe nipple and valve. In the event the valve goes bad, it is very easy to turn the old valve out and replace with a new one. If one is renovating any area that requires new shutoff valves, I would recommend this approach. It costs more to do it this way, but it does pays off down the road.
@mouradbelkas598 Жыл бұрын
Thank you, well explained..
@lequang2296 2 жыл бұрын
Crystal clear Great instructions Like & Shared
@Got2Learn 2 жыл бұрын
Thank you so very much!!
@vargheseabraham7573 11 ай бұрын
Good explanation. God bless you.
@DuyPham-on5cv Жыл бұрын
I don't even have any leaking problems yet but I just enjoy watching and preparing this before I encounter one. You just make it so easy and doable! Thank you for these videos and I look forward to more to come from you!
@Got2Learn Жыл бұрын
Thank you so much!!!
@windsofmarchjourneyperrytr2823 Жыл бұрын
In old houses expect it to get WAY more complicated fast. Not saying don't do it, but just have someone on call to help. Pay them well enough to pick up the phone in emergencies before you REALLY have one.
@Kainosktisis 2 жыл бұрын
Since the pipe on a compression type valve is normally "compressed" which can cause a problem trying to remove them damaging the pipe, when changing them I worry less about the ferrule's shape, since were talking about soft copper and brass, being soft metals they will "reform" when compressed to the new shape since that's what there designed to do. By applying a little white Teflon pipe dope over the whole ferrule before reinstalling the new valve body which takes care of any "misshaped" filling any micro minor void worries and reduces the potential for pipe damage if it leaks a quick 1/4 turn usually fixes the problem, worse case if it doesn't work you can always go back and try the puller and hopefully you wont damage the pipe, great video 🤜🤛👍
@Got2Learn 2 жыл бұрын
Heee hawww!!!
@cessealbeach Жыл бұрын
Man you Nailed IT! Thanks
@pedrodog7855 2 жыл бұрын
You can also solder on a 1/2 male copper adapter and they make angle stop FIP
@soldiersvejk2053 7 ай бұрын
Very informative. Thank you！
@ContemporaryCompendium 2 жыл бұрын
Dude this was amazing! Thanks so much for the info!
@Got2Learn 2 жыл бұрын
🤘🤘🤘
@oneclick1066 10 ай бұрын
Great to share this video. Thank you.
@thudang3039 Жыл бұрын
Thank you for sharing and creating this content!
@Got2Learn Жыл бұрын
🙏
@gy9969 6 ай бұрын
Great video! I learn so much from this video. Thank you.
@Got2Learn 6 ай бұрын
😇😇😇
@tenthdimension9836 2 жыл бұрын
I've got two comments. 1. At 0:38 you show a valve that's leaking and mentioned that they can't be fixed leaving no choice but to replace. In my experience 80% of the time this particular leak is repaired by tightening the nut to better seat the packing on the valve stem. I think you should have mentioned that as a first step before going to the trouble of replacing the valve. It's a legitimate option. 2. At 3:20 you show a Superior brand ring pulling tool and mention that you like to put oil on the threads to increase its life. In my opinion Superior tools are absolutely the poorest quality. I have rigid pipe cutters that are 50 plus years old and the threads have never worn out. I consider Superior tools to be disposable and have been disappointed more than once. Just my two cents thank you.
@Got2Learn 2 жыл бұрын
1) Yes, if you have a 2 piece model, you can tighten the pack if it's leaking there, some models are only 1 piece so there's no option for this. 2) I treat my cheap tools the same as I do my good quality tools ;)
@carlosvasquez8229 Жыл бұрын
Very helpful video 👍🏼👍🏼
@splanzza 2 жыл бұрын
Hey G2L I have a bit of off-subject topic but I think you might find a kick out of it. Drum roll please … Removing Old Kitchen/Bath Faucet! To be more precise, how to undo nuts that hold faucet to the sink. And all of that as a replacement, as usually is, meaning - from underneath the existing sink. Too bulky basin wrench (ALL are) fits never, hand works once in a blue moon etc. and even then only on larger plastic nuts. Not to mention an under-sink spaghetti city of various pipes. On top of that, level of intensity depends on previous artisan installer from 1873. Any video online is filmed in 100% controlled environment with new faucets and shiny crisp nuts. LOL If you could find one and show a tricks and tips, internet gods will be grateful and you might end up in copper-heaven. Hope all is well with you. All the best and happy holidays. 👽
@windsofmarchjourneyperrytr2823 Жыл бұрын
They've utilized evil now. 😈 They're inordinately hard to get to/remove/replace. I know there's a trick, but last time my back hurt 3 days.
@TonyOhio 2 жыл бұрын
very details guide. thank you very much
@Got2Learn 2 жыл бұрын
🤗🤗🤗
@aaragon6866 Жыл бұрын
Nice video. Thanks
@magorasmask101 9 ай бұрын
Flawless Instruction
@gerrymcintosh4477 Жыл бұрын
Great video with some useful tips. Thanks
@Got2Learn Жыл бұрын
🙏🙏🙏😏
@crumdoggy Жыл бұрын
Excellent work!!!
@Got2Learn Жыл бұрын
Thanks a lot!!!!
@jazzs2965 Жыл бұрын
Excellent content on this video…… Thanks
@TheMegansdad 10 ай бұрын
Terrific video! Very informative.
@Got2Learn 10 ай бұрын
Glad you enjoyed it!!
@Irrigationplus 2 жыл бұрын
I learned some thing new👍🏼
@anjanean 9 ай бұрын
Nice job! Thanks
@Got2Learn 9 ай бұрын
👌👌👌
@Yourengineeringstandpt 4 ай бұрын
Use a ball valve, and put a reducer on it with a 1/2" to 3/8 " so you can add a 3/8 male adapter to your sink ball valves last way longer then a ordinary sink valve .
@pacremodel9745 2 жыл бұрын
Great video. I like using the Paso 4661 compression sleeve puller to pull off the compression ring. Just make sure to ream the inside of the copper pipe so that the nose goes inside the pipe easily. The only thing I don’t like about compression ring angle stops is if the previous installer tightened down the nut so tight that the compression ring won’t come off. Makes for more work to get it out.
@Got2Learn 2 жыл бұрын
Thanks for the info!
@theequalizer2727 2 жыл бұрын
It’s Pasco 4661 Fully Machined Compression Sleeve Puller, not Paso. How is it better than one in this video?
@Wayne--O 2 жыл бұрын
:36 if leaking at the handle.. just hold the valve body and tighten the nut behind handle. Great tutorial
@Got2Learn 2 жыл бұрын
That's a good idea!!!
@craigpattison5762 2 жыл бұрын
That's what I did also on the valve to my bathroom sink hot water line. Leak fixed!
@waltw918 Жыл бұрын
I got a surprise… was all good then I heard a gurgle sound and then it got bad fast. 😂. Lesson learned.
@Got2Learn Жыл бұрын
🤣
@yottabyter 2 жыл бұрын
Dude tell me your not done making new content. Great stuff here. Keep it coming!
@Got2Learn 2 жыл бұрын
Taking a long break 🙏🙏🙏
@vitaliiv3882 3 ай бұрын
Very useful! Thanks big boss, I’m electrician but sometimes I need to fix some plumbing at my home.
@Got2Learn 3 ай бұрын
🍻
@Got2Learn 2 ай бұрын
Thank you, don't forget to share, it really helps the channel!
@chaliebear 9 ай бұрын
good video very clear and understanding, thanks
@Got2Learn 9 ай бұрын
🙏🙏🙏
@MrWhitelightning73 8 ай бұрын
Outstanding
@jonathana9045 Жыл бұрын
Thank you
@manaoharsam4211 Жыл бұрын
Very good.
@abedhalawani5634 5 ай бұрын
Beautiful thank you
@yotoad 2 жыл бұрын
You tha goat for this
@Got2Learn 2 жыл бұрын
😇😇😇
@user-ff5tn9uk1z 5 ай бұрын
Thanks for your video, it really helped me understand the install. Cheers! :)
@Got2Learn 5 ай бұрын
You're welcome!!!
@rachelparis2892 Жыл бұрын
Thank you SO MUCH!!!!!
@Got2Learn Жыл бұрын
🤜🤛😇
SOFIADELMONSTRO
Рет қаралды 65 МЛН
seejanedrill
Рет қаралды 1,3 МЛН
Home Repair Tutor
Рет қаралды 1,3 МЛН
Got2Learn
Рет қаралды 10 МЛН
DIY Plumbing Guy
Рет қаралды 56 М.
HouseBarons
Рет қаралды 33 М.
SOFIADELMONSTRO
Рет қаралды 65 МЛН