No video

Great FPV on a Budget - How to get a camera, transmitter and receiver (products from Banggood.com)

  Рет қаралды 246,714

Painless360

Painless360

Күн бұрын

Пікірлер: 314
@atschris
@atschris 9 жыл бұрын
Glad to see you found the same comparability issue between the rx and fatshark tx. I used one for some 'passenger' goggles and found much poorer range than my immersion rx, but thought it might just have been a bad rx so banggood replaced it which of course made no difference. It will be interesting to see how the camera/tx combo work in action.
@Painless360
@Painless360 9 жыл бұрын
atschris In action they work great for local field flying and getting into FPV. You get a huge 'bang for your buck' using this system and once people start to get into it then investments in more expensive kit makes sense. Saying that - still love the Quanum goggles - don't care if I look like Bender!
@byronmitchell1927
@byronmitchell1927 3 жыл бұрын
This video has really helped me out and have taken my fatshark off of the shelf..it's been there for a long time all because I didn't realize that I was not matching male with female anteanas..didn't realize I had all female anteanas!!!.like wow thanks a lot..back to the crawler
@echopark25
@echopark25 9 жыл бұрын
Just in the process of ordering bits and bobs to build my first ever quad, a wee 250 so this is prefect to keep the price down plus so easy to understand for a newbie like me. Can't wait to try this out!
@Painless360
@Painless360 9 жыл бұрын
echopark25 There is a link to a lovely 250 quad kit with all the components you need - kzfaq.info/get/bejne/pbeVgblevNicgnk.html. Just add a few more batteries, charger and a radio/receiver.. Happy building!
@UncleDoug
@UncleDoug 8 жыл бұрын
Excellent presentation.....clear and concise. Thanks for posting this video :)
@yellowbluerc5047
@yellowbluerc5047 9 жыл бұрын
After getting a broken transmitter from bevrc I got this to start fpving. I got the 305 receiver and they are a perfect setup for my bixler. I use the quantum DIY fpv goggles and can see everything fine to around 2km
@robinmorris3976
@robinmorris3976 9 жыл бұрын
I couldn't agree more. For the price, this little FPV setup is great! I use it on my 230 quad. And I am going to order another. To replace my Fatshark system, on my hexicopter.
@fuzzy_bear
@fuzzy_bear 2 жыл бұрын
Thank you. This has answered pretty much all the mind bending questions that have been bugging me.
@keyproductions100
@keyproductions100 9 жыл бұрын
im using Eachine fpv kits, a 200mw and a 600mw, they are sound, even when using the standard antenna, they handle low light really well, the only problem I found was when its getting dark and theres still a bit of light left in the sky the camera struggles to see the ground until you are in the shadows, other than that, its a perfect kit and the price is a bonus
@johanopperman8039
@johanopperman8039 9 жыл бұрын
Thanks for all the info. Very helpful for a beginner like me. You make it very easy to understand. Happy flying
@lo-res794
@lo-res794 8 жыл бұрын
Another great video just needed a RCA coupler joiner adapter for connecting the two females. Thought I was missing a lead at 10.34
@scottfirman
@scottfirman 7 жыл бұрын
I cannot wear fat shark due to glasses. I did get some nice goggles on sale,actually referbs at a dirt cheap price. I got the echine tx02 camara and also a seperate transmitter and receiver. I wanted it to run my run cam from. I wish Banggood would send me free stuff to test but thats ok,I just watch guys like you and figure out what it is I want. Good video.
@Paulmaddison2012
@Paulmaddison2012 9 жыл бұрын
Great video mate you should be a t.v. presenter, very clear and well described.
@miguelpires5856
@miguelpires5856 8 жыл бұрын
for the start this seams about right for me ... but for now ... no goggles ... how to plug the receiver on a laptop ... ? thanks amazing vid as always , you have been helping a lot , thanks
@Painless360
@Painless360 8 жыл бұрын
+Miguel Pires see our later videos in the 'Introduction to FPV' series..
@trancebynature4
@trancebynature4 8 жыл бұрын
this video is great thankyou...iwas looking on how to get my clover leaf antenna to work on my ts832
@moopoo123
@moopoo123 8 жыл бұрын
Hey mate, thanks for making really clear and concise videos! Subscribed.
@Painless360
@Painless360 8 жыл бұрын
+Jason Thank you. Welcome to the channel!
@sputniksam
@sputniksam 9 жыл бұрын
Great review😃 I have the same Eachine camera/vTX combo from the UK Bangood warehouse and found it to be an excellent all in solution, especially for the price. Regards Nidge
@thepresteign4364
@thepresteign4364 9 жыл бұрын
Great review! If we could see how to add an OSD to it and what the latency of this equipment is, that would be fantastic!
@Painless360
@Painless360 9 жыл бұрын
The Presteign You add an OSD to this in *exactly* the same was as any other system - search on my channel for 'MinimOSD' to see *loads* of videos that cover this. Latency is very low (
@HughD
@HughD 9 жыл бұрын
Nice review. The camera is CMOS and I think the CCD cameras, also inexpensive at about $17 from Banggood, are less prone to jello effects because of rolling shutter in CMOS devices. Thanks for exploring the more affordable options.
@Painless360
@Painless360 9 жыл бұрын
Hugh Dinwiddie Please point me to a cheap. 5v CCD camera... Thanks
@HughD
@HughD 9 жыл бұрын
Painless360 I don't have this camera, but this looks like a possibility: goo.gl/mNXCsu After your video I ordered this which seems to be the same camera as the link here along with the transmitter you had: goo.gl/F5AZwc
@Painless360
@Painless360 9 жыл бұрын
It is very similar but not the same, will have to get one and see.. Thanks and happy flying!
@TheEpikBeats
@TheEpikBeats 9 жыл бұрын
Nice video - FYI the different connextors are called small and rpsma if u didn't k ow already. Love your videoa, especially your APM series. :)
@Painless360
@Painless360 9 жыл бұрын
The Channel Formerly Known as Epik Beats Thanks for that - I did know that but most people get very confused and I've seen vendors also use the wrong names for the connectors to so showing the pin/lack of pin is a very 'safe'' way of letting subscribers know what they are getting/need. Happy flying!
@AeroHikeProductions
@AeroHikeProductions 7 жыл бұрын
6:00 chewbaca is that you
@d3dr0y24
@d3dr0y24 7 жыл бұрын
u mean c3p0 lmao ur so dumb
@stevec2196
@stevec2196 9 жыл бұрын
I built an FPV system like that with similar parts I got on Ebay. I probably should have ordered from Banggood though because the first seller I ordered from seemed to go out of business and was delisted from Ebay so I never got anything and had to order everything all over again from a different seller. I was going to use it on a quadcopter that I intended to build using a Pixhawk PX4 but since that's impossible to ever get working I'll probably use the FPV system to get video from a remote security camera instead.
@Painless360
@Painless360 9 жыл бұрын
Lots of other flight controllers to use if you have given up on the Pixhawk. Best of luck!
@stevec2196
@stevec2196 9 жыл бұрын
+Painless360 Yes I bought a KK2.1 that should be an upgrade from the worthless Pixhawk. Not as many features but at least they can be made to fly and you don't need any crappy shareware to run it.
@Painless360
@Painless360 9 жыл бұрын
The KK2.1 is BASIC so you've gone from one end of the spectrum to the other! Best of luck.
@kdanagger6894
@kdanagger6894 8 жыл бұрын
One thing I really hate about FatSharks is that they have horrid chromatic aberrations at the edge of the FOV. These guys don't have any grasp of good quality optics. Boscam goggles are somewhat better in this regard, but there is still room for improvement in them also. You would think that for the price that these goggles cost, they could provide some decent achromatic lenses.
@Painless360
@Painless360 8 жыл бұрын
+K Danagger The Dom V3 I am using are great. The first ever set I got (going back a few years here) were the Predator 2 and the lenses were 'ok' but had chromic blurring at the edges. The latest generations is a huge leap. Happy flying!
@KAFA2020
@KAFA2020 8 жыл бұрын
Could I used the TX/RX both for video and controlling
@aye.fpv_
@aye.fpv_ 2 жыл бұрын
Chewbacca spotted ❤️❤️ 5:57
@michaelbrewer7259
@michaelbrewer7259 8 жыл бұрын
Can you use an OSD with this setup? thank you for your brilliant videos, I've learned so much!
@Painless360
@Painless360 8 жыл бұрын
+Michael Brewer Yes, the OSD normally goes between the camera and Vtx. Best of luck!
@saddleryrepairs
@saddleryrepairs 9 жыл бұрын
Good job on the fpv video i get all my stuff from Banggood.com but not the batteries get them from Hobby King.
@Painless360
@Painless360 9 жыл бұрын
Sylvanus Houseman Yeah, not too many LIPO batteries yet in the Banggood.com site..
@Matthijsist
@Matthijsist 8 жыл бұрын
Can you trim around the edges of the camera backplate to make its profile smaller?
@winstonbanks1057
@winstonbanks1057 8 жыл бұрын
Hi thanks for the reply buddy correct phantom runs on 5.8htz so I'm looking for 2.4htz will fine
@joesoap7852
@joesoap7852 7 жыл бұрын
I have pzo420h with rc832 and ts832...can't get it working though...where do I plug yellow cable into ts832...
@rob182935
@rob182935 9 жыл бұрын
Thanks so much for the clear explanation of this FPV system. I am totally new to RC and quadcopters so I have just now ordered the kit above and the Emax frame combo kit you also reviewed, so excited. Can you recommend an entry budget level radio and quadcopter battery as well as the battery for the receiver/quanum goggles. Thanks so much I'll keep watching.
@Painless360
@Painless360 9 жыл бұрын
***** Hi Rob, there are a few videos on the channel about learning to fly and flying FPV. This playlist may be of use - kzfaq.info/sun/PLYsWjANuAm4rQfddw-7YZDzckoJ_KyOpm Radios are an investment for the hobby and something that can stay with you for many years. I still use my first 'proper' radio a DX7 and have had it for almost 8 years now. I would look at what your friends use and consider radios like the Turnigy 9XR. The battery to power the goggles doesn't need to be huge. I little 3s 500mah pack will run if for hours. Best of luck with the FPV, it can take time to get to grips with it..
@rob182935
@rob182935 9 жыл бұрын
Many thanks for prompt reply. I'll keep you posted as to how things develop. Cheers
@Painless360
@Painless360 9 жыл бұрын
Best of luck with it. FPV is a blast!
@saulwarren9611
@saulwarren9611 Жыл бұрын
nice info sir
@mk1v247
@mk1v247 9 жыл бұрын
Great Video. But please note, in most EU Countrys are only 25mW allowed.
@Painless360
@Painless360 9 жыл бұрын
Mario der Goombaplätter True, always make sure you comply with local regulations. See this covered in my video series 'Introduction to FPV'. Happy flying!
@stuartbailey1632
@stuartbailey1632 9 жыл бұрын
I found the 148 degree camera a bit too wide angle for me. They also sell the same setup but with a 110 degree camera which I find a lot easier to fly with.
@Painless360
@Painless360 9 жыл бұрын
Stuart Bailey Yeah, I normally fly with 110-120 degree systems myself but don't find the 148 degree tricky to use. I have used wider too and, for me, the detail in the centre of the screen became just too small. Happy flying!
@darzfpv1343
@darzfpv1343 7 жыл бұрын
What jst connector is it on the fpv transmitter? A wire came off and I can't get it back in so I will need to buy a new jst connector with wires. Thx.
@pushpasrivastava3739
@pushpasrivastava3739 6 жыл бұрын
Thanx friend
@johanopperman8039
@johanopperman8039 9 жыл бұрын
How does the Boscam RC 832 receiver compare to the one you just reviewed?
@grantanderson6066
@grantanderson6066 6 жыл бұрын
Instead of purchasing a monitor, are you able to hook this up to a lap top or a tv and get the image?
@Painless360
@Painless360 6 жыл бұрын
There are a few gadgets out there but I’ve not used them..
@JohnJonesRocketCity
@JohnJonesRocketCity 8 жыл бұрын
I can watch your videos for days!!! There is so much good information. Thanks for all the great instruction! Subd! I have a quick question. I saw a 600mw version of the tx kit from eachine on banggood. Would that be a better choice? Or does that not make too big a difference? Sorry if I missed that in one of your other videos. Oh yeah it will be used for racing and freestyle type flying. Thanks for any advice!
@Painless360
@Painless360 8 жыл бұрын
The more power equalls more range. A lot of countries only allow a certain maximum power for FPV transmitters so be aware of that when you order one. Best of luck!
@JohnJonesRocketCity
@JohnJonesRocketCity 8 жыл бұрын
Painless360 I will definitely remain aware of that! Thanks again!
@stavlad
@stavlad 9 жыл бұрын
Hi mate, you have helped me loads with this hobby!! Keep up the great work, appreciate it! I went down the Fatshark Predator route and thought they were ok'ish for my first FPV experience, I enjoyed it, but not what I hoped. Then I got the cheap HK Quanum as I thought bang for buck, they must be good..again, they were OK...too many wires!. Now I bit the bullet and went for the FatShark Attitudes V2 and even though only have 10 degree more FOV (its actually 40% more over the preds!!), I should have gone for them first time, this is FPV, they are a must, perfect kit!!! Anyway, long story short, compared to the fatshark cam and tx that comes with the goggles, how does this cam and TX compare in view quality? It looks and sounds too good to be true....for £20 are they that good??
@Painless360
@Painless360 9 жыл бұрын
PAUL DONOHOE The camera is ok, the transmitter is good. If you want FatShark quality buy FatShark ;)A number of people use the transmitter with a 5v FatShark camera (including me - you can see it on the Tri-copter videos)I would give these a try though on a model that you expect to crash. Happy flying!
@peterneumann9254
@peterneumann9254 9 жыл бұрын
Startersets are very good. Do you know if there is a WDR (wide dynamic range) system in camera? This makes the image not better but the contrast is much better. Maybe an idea for another Video. Have great weekend and thanks for so many informations.
@Painless360
@Painless360 9 жыл бұрын
Peter Neumann This is a camera and transmitter for less than £18 - what so you think? ;) Saying that, the image is excellent but if you want to spend a lot more there are other options for a camera you could connect.
@william1748
@william1748 9 жыл бұрын
I have purchased the"Budget FPV kit" and it works great, I says on the instructions that the tx supplies 5v to the camera, would it be OK to connect it to a Möbius then (providing I don't make a Horlicks of the connection), anybody any advice on this?
@Painless360
@Painless360 9 жыл бұрын
William Mckinstry Not tried it myself as I tend to use the Mobius separate. Anyone else have any ideas?
@blueripspyk
@blueripspyk 9 жыл бұрын
Hi, I really enjoyed your Video. I'm just a beginner . I don't seem to see much mention of good starter batteries ... would you point me in the right direction for batteries to suit the gear recommended in this video ? ( Cheers )
@Painless360
@Painless360 9 жыл бұрын
+Spyk There is a couple of series that I'd suggest you watch to help with your knowledge - the 'Introduction to RC' playlist and the 'Introduction to FPV' playlist. They should help. Let me know if there is still a question after you've been through them...
@axefixer
@axefixer 9 жыл бұрын
Brilliant series of vids, can't thank you enough for all the useful info. Can I ask if the low cost fpv gear from banggood can be used with a Möbius to display on a ground station? Thanks again.
@Painless360
@Painless360 9 жыл бұрын
Roger Williams Yes it can. You will need to make the cable to connect the USB/AV out cable that comes with the Mobius to the Tx though.. Best of luck.
@yoodoo122
@yoodoo122 9 жыл бұрын
Hiya Painless,can you show a vid on how to wire the Hobbyking G-OSD 3 Mini OSD System to this FPV system,I have tried numerous times but with no success as the wiring colours are different.
@Painless360
@Painless360 9 жыл бұрын
yoodoo122 Sorry I can't as I don't have one. Best of luck with it.
@yoodoo122
@yoodoo122 9 жыл бұрын
Painless360 Ok,thanks all the same.
@ctrway11
@ctrway11 7 жыл бұрын
great video, thanks.
@creeek3
@creeek3 9 жыл бұрын
Great review, really nice to know about this. I think compatibility is a great issue with FPV... and talking of compatibility, do you have any idea if this receiver work with the Walkera iLook camera? Thanks
@Painless360
@Painless360 9 жыл бұрын
sorry i don't and cant test it here. if it works with boscam or fatshark it should. .
@4DIYers
@4DIYers 7 жыл бұрын
Excellent video! I have a question that isn't RC related, but still is on the subject of wireless cameras. I picked up a security camera and would like to use it wirelessly over an IP so I can view it on my laptop. I know there are systems that can be purchase, but this is a high quality camera that I have next to nothing invested in. I'm hoping I just need a transmitter, but I'm not sure which transmitter would be suitable. If you could point me in the right direction, that would be greatly appreciated :)
@Painless360
@Painless360 7 жыл бұрын
+4DIYers sorry, Im not sure. I would normally use some kind of FPV system but Wi-Fi connectivity isn't something we tend to get involved in a lot here for remote control. Best of luck with it.
@4DIYers
@4DIYers 7 жыл бұрын
No problem and thank you for the reply :) I appreciate your honestly.
@Sp3ktral22
@Sp3ktral22 9 жыл бұрын
Is the RP-SMA adapter you quote in the mentioned products link above the correct one? or do I have to select which 'ends' I need when ordering. You guessed it.. I'm new to this FPV lark but I do intend to follow your advice on the strength of your videos here. Superb work! I hoping your setup here will be suitable for fixed wing out to 1500m?
@Painless360
@Painless360 9 жыл бұрын
The links are to the ones I am using in the video. Best of luck!
@bigboy-oh5kx
@bigboy-oh5kx 8 жыл бұрын
How do the quanum v1 and v2's compare to the fatshark predators? What has the best video?
@Painless360
@Painless360 8 жыл бұрын
+FPViking You're asking if a £20 or £set of goggles compete with a £280 set? It's very much personal choice. See our review videos of them all for more detail..
@MikeDesertHunterHale
@MikeDesertHunterHale 8 жыл бұрын
thank you so much
@Henchmedias
@Henchmedias 9 жыл бұрын
Over what distance would a system like this work (including the circular pol antennas)? Sorry I'm new to FPV, thanks
@Painless360
@Painless360 9 жыл бұрын
This is covered in the ' Introduction to FPV ' playlist. Hope they help!
@josiahnilsen2323
@josiahnilsen2323 9 жыл бұрын
What Type of antenna did you get? i mean L type or w type thanks
@vitaliyd193
@vitaliyd193 9 жыл бұрын
I m confused on 14:13, where is that interferance come from, is it solved by circular polarized antenna?
@Painless360
@Painless360 9 жыл бұрын
Vitaliy D Not sure what you are referring to, if you mean the distortion when using a FatShark Tx then not it will not. There are loads of 'Introduction to FPV' videos that explain it. Happy flying!
@ryandorman8005
@ryandorman8005 9 жыл бұрын
is your camera actually 148deg fov, I bought 2 of the 200mw combo and a spare camera all advertised as 148deg fov, I can tell and show (video a/b comparison filmed from a 7" screen with edges of fov marked for both) that the 3 that I recieived (2 in combo with 200mw 32ch tx 1 seperate seperate for quanam goggle mount cam) are nowhere near 148deg, they are substantially narrower view than a 131-132 deg fov mobius c lens camera, all labeled with little silver sticker as 148deg, all appear to be 110deg.
@mik439
@mik439 9 жыл бұрын
are you going to make video about how to make good quality of FPV video? LC filter, BEC and so on
@Painless360
@Painless360 9 жыл бұрын
Konstantin Mishenkov Not planning to - I've never had any of the problems with interference here using industry standard kit and common sense..Maybe I've been very lucky..
@mik439
@mik439 9 жыл бұрын
Painless360 i use BEC to power video without it video very unstable on maximum throttle
@snaprollinpitts
@snaprollinpitts 9 жыл бұрын
thanks, I needed that.
@robtucker9888
@robtucker9888 8 жыл бұрын
Thanks for the great video. I'm trying to order the parts and see that there are now right angled antennas available from the link you included. However, I am getting a bit confused between the various SMA connector types (male, female, SMA, RP-SMA), so please can you clarify which antennas and connectors should be ordered? Thanks,
@Painless360
@Painless360 8 жыл бұрын
I always rely on the image in a listing as some vendors get confused too! ;)
@villalji
@villalji 8 жыл бұрын
Hi mate, a big fan of your channel here, you helped me to get my tri-copter with multiwii and now I have build several quads with naze32 with your help. Now getting into FPV, and I'm fighting with a Eachine camera to make it work with the minimOSD, so far no success. I see you have used that camera in this video, I have almost the same system (Eachine 600 with 800TVL camera), can you point me to the configuration I need in the minim osd arduino code to make them work together? (Eachine camera with the minimOSD).Thanks!
@Painless360
@Painless360 8 жыл бұрын
All of the steps are covered in the video. Check wiring and also that both are set to the same TV setting (PAL/NTSC).. Best of luck!
@bishopvick6373
@bishopvick6373 9 жыл бұрын
Does any body really ever check the mw power of your video transmitter? Thinking about increasing from my uk 25mw...
@Painless360
@Painless360 9 жыл бұрын
Bishop Vick With the right antennas you can get 1.5km+ ranges with a 25mw Tx. See the videos on antenna choices for the ground station in my 'Introduction to FPV' series.. Hope it helps.
@trevorc6793
@trevorc6793 8 жыл бұрын
Thank you for a very informative video Painless, as this video is about 12 months old, are there better items to use these days? Im just getting into FPV so trying to get the best bang for my buck! TIA
@Painless360
@Painless360 8 жыл бұрын
+Trevor Crouch Great idea - this is due for an update! I'll add this to the list. See our latest reviews for the latest kit for this in the meantime..
@theinnocent714
@theinnocent714 9 жыл бұрын
Hi im new to fpv n I want to put together something like this but using my Teleporter V4. which I currently have from my RC RTF VAPOR combo. would u post direct link to the vtx n how to link it to my fatshark leleporter v4? thanx
@Painless360
@Painless360 9 жыл бұрын
V Tran I have a complete series on the channel - 'Introduction to FPV' that should help. Best of luck with it.
@CP_FPV
@CP_FPV 9 жыл бұрын
Hi painless does this RX run on 2s ? Also with the quanum goggles, Ive noticed ready made rc sell a 5inch dvr with built in RX and battery that has a higher resolution screen. I was just wondering if that would be an option to put that dvr in the qaunum head piece. It would be all in one
@Painless360
@Painless360 9 жыл бұрын
phats24 Specs say that it will run from 7v and up so maybe. Sounds like a nice idea - let me know how you get on!
@upperechelon3456
@upperechelon3456 8 жыл бұрын
Excellent!
@istvanpapp3257
@istvanpapp3257 8 жыл бұрын
Good video,,, thanks Excuse me, I would even be a question. How you can use the on-screen joysticks? You transformed the cable? or always brought out the video signal cable and power. Plugging the OSD cable and configure it? Oh, and how many volts using the camera hs1177
@Painless360
@Painless360 8 жыл бұрын
Sorry, we've not used those cameras. I assume that will be covered in the manual and specs. Best of luck..
@theinnocent714
@theinnocent714 9 жыл бұрын
direct link on banggood or the type of vtx. would any 5.8g vtx work on fatshark leleporter v4, or do I need to swap out module in the googles too?
@Painless360
@Painless360 9 жыл бұрын
V Tran I have a complete series on the channel - 'Introduction to FPV' that should help. Best of luck with it.
@jamesthompson4800
@jamesthompson4800 7 жыл бұрын
Has anyone setup a two vtx/rec for FPV having 2 camera's for stereoscopic vision ? I was thinking how cool it would be having multiple camera's
@Painless360
@Painless360 7 жыл бұрын
That's how some of the side by side systems do it. Look at the 3D systems from Skyzone.. Happy flying!
@Invisiblejihadi
@Invisiblejihadi 8 жыл бұрын
Chewbacca stomach rumble at 5:57
@Painless360
@Painless360 8 жыл бұрын
Yep :D
@stephenwood4053
@stephenwood4053 4 жыл бұрын
so howw do ya connect recever to a car monitor?
@Painless360
@Painless360 4 жыл бұрын
Please see my old video on building a ground station.. I did it there..
@infiknight6864
@infiknight6864 6 жыл бұрын
Hey nice video.. I have a problem in Eachine VTX03 Mini 5.8G 9Bands 72CH. It's getting hot quickly. Is that normal??
@Painless360
@Painless360 6 жыл бұрын
+InfiKnight some of the smaller video transmitters do get quite hot so it's important not to have them sat around too long and get them in the Air flying where they can be cooled by the passing breeze. It shouldn't get too hot though, if it's getting so hot that it starts to have a problem with the video then let the reseller now
@infiknight6864
@infiknight6864 6 жыл бұрын
Thank you
@Powershotknecht
@Powershotknecht 9 жыл бұрын
cool
@pushpasrivastava3739
@pushpasrivastava3739 6 жыл бұрын
Which battery should i use to power a 1000tv fpv camera with a 600mw transmitter.
@Painless360
@Painless360 6 жыл бұрын
Sounds like your are new to this. Check out the ‘introduction to FPV’ playlist for lots of the basics.. best of luck!
@hangfire5005
@hangfire5005 9 жыл бұрын
Is quid and pound the same thing?
@Painless360
@Painless360 9 жыл бұрын
Yep ;)
@ZubKS
@ZubKS 7 жыл бұрын
Hi again, I'm reading up about fpv and to me it seems the 2.3 ghz and 1.3 ghz frequencies better for penetration and signal but I can't seemed to find any equipment for them within the U.K. Law. Any ideas on what I can get for long range fpv without breaking the bank?
@Painless360
@Painless360 7 жыл бұрын
1.3 is not available for airnourne transmittion here in the UK. Check out sites like the www.fpvuk.org/fpv-law/ to see what's legal. If you use 100mw 2.4Ghz for the radio and 25mW 5.8Ghz for the FPV you're good. Other bands area available for specific things too..
@johnpollard6651
@johnpollard6651 8 жыл бұрын
Wood a boscam headset that's 250 mw go with a fat shark 250 mw transmitter
@Painless360
@Painless360 8 жыл бұрын
+John Pollard Watch the videos in the 'Introduction to RC' for all of the basics you need. Best of luck.
@kronosdarkangel5290
@kronosdarkangel5290 4 жыл бұрын
How about the range or distance?
@Painless360
@Painless360 4 жыл бұрын
See my videos in the introduction to fpv and antenna lab playlist. All covered in there...
@B0M0A0K
@B0M0A0K 8 жыл бұрын
Great video.I realize this is a little old now but Banggood have discontinued this receiver (RC58-32CH) - would you happen to have a recommended alternative please?
@Painless360
@Painless360 8 жыл бұрын
Id look at the excellent HobbyKing receivers we've looked at on the channel - they are also covered in the HobbyKing ground station video too. Best of luck!
@tahosrfr
@tahosrfr 9 жыл бұрын
What limits or decides/controls my FOV, the camera or goggles?
@Painless360
@Painless360 9 жыл бұрын
tahosrfr The camera, mainly. The screen/goggles you use may clip a very small part of the screen around the edges. Hope this helps.
@Leffelito
@Leffelito 9 жыл бұрын
LOL is that Cheubaka I hear at 05:59 ? :-P
@Painless360
@Painless360 9 жыл бұрын
+Leffelito Yep - he crops up all over the place on the channel. He's been away for months but is now back home again now. Something about filming a movie in London with some old friends? Not sure what he's banging on about but he's been very excited.. :S
@MrStevegibb
@MrStevegibb 8 жыл бұрын
Will this RC58-32CH Receiver work with the nighthawk pro 280?
@Painless360
@Painless360 8 жыл бұрын
+Stephen Gibb Should do..
@HyperJoe
@HyperJoe 9 жыл бұрын
I'm not sure if there's a problem here with My Transmitter, I've ordered 2 of these, the 600 mW version and the 200 mW version, I've recieved the 200 mW version already and during the bench testing everything seems to work perfectly, great video and good reception, everything.. My main issue is that the Transmitter gets extremely hot, almost to the point that you can't touch it, that's a bit worrysome. Is there a problem, or is that normal, should I maybe fabricate some heat sinks? And that's just the 200 mW, the 600 mW is I'm sure gonna be even worse.. :(
@Painless360
@Painless360 9 жыл бұрын
+Soco Joe They do get very warm, If you have a few little heat sinks it wouldn't hurt to pop one on the back of the inbuilt heat sink.. Best of luck!
@HyperJoe
@HyperJoe 9 жыл бұрын
+Painless360 Thanks very much for the reply, I just happen to have a Boscam 250 mW that never really worked right, why I bought these, such good reviews, I'll definately try to patch the heatsink from it to this new Transmitter.. Great Video, thanks so much for the Education, I'd never be able to do this without Your help.. ;)
@zacharybalov5353
@zacharybalov5353 8 жыл бұрын
do u need a battery for the video receiver AND the video goggles?
@Painless360
@Painless360 8 жыл бұрын
Usually you use the same battery for both..
@SaurabhPachpande
@SaurabhPachpande 7 жыл бұрын
can u plz suggest a cheaper reciever ?
@Painless360
@Painless360 7 жыл бұрын
These days I quite like the Quanum Autoscan receiver - works well and great screen for simple setup..
@gregcornwell3584
@gregcornwell3584 8 жыл бұрын
What is the range of this fpv before it breaks up? Also can you use a screen/monitor to see instead of the goggles? I'm new to this stuff.
@Painless360
@Painless360 8 жыл бұрын
+betactical Range is tricky to answer as it depends on the antennas used, local conditions, power of the Tx, sensitivity of the receiver, position of the craft etc. With decent antenna this will easily get you past 400ft and well beyond with the right kit.
@winstonbanks1057
@winstonbanks1057 8 жыл бұрын
High would this set up work direct on my phantom fc40 at the mo I'm running a sj4000 cam direct on its own battery power .
@Painless360
@Painless360 8 жыл бұрын
+Winston Banks Not sure, as we've not used the DJI products here. You should be able to make it work with a little cabling.. Best of luck..
@trancebynature4
@trancebynature4 8 жыл бұрын
will this system work with boscam transmitter
@Painless360
@Painless360 8 жыл бұрын
Should do, see the later video of this one where we look at the newer kit.. Happy flying!
@scalemodelbuilds3038
@scalemodelbuilds3038 8 жыл бұрын
Hi, i am looking at getting into FPV and was wondering if it would be possible to power the FPV equipment and aircraft off the same battery by using the balance plug for FPV and the normal power cables for the aircraft. would this work or would it damage the battery because of to much current being taken out too quickly. Will
@Painless360
@Painless360 8 жыл бұрын
+Scale Model Builds Absolutely. Normally I add an extra connection from the power distribution board on the model kzfaq.info/get/bejne/aM2YgNeGzryVaKs.html
@scalemodelbuilds3038
@scalemodelbuilds3038 8 жыл бұрын
thanks!
@G777GUN
@G777GUN 8 жыл бұрын
Can you tell me how much range this camera transmitter has. I am new to this FPV systems.
@Painless360
@Painless360 8 жыл бұрын
+G777GUN if you're new then watch our 'Introduction to FPV' series. It covers all the basics.. Best of luck.
@G777GUN
@G777GUN 8 жыл бұрын
Thankyou
@MrSpikebender
@MrSpikebender 5 жыл бұрын
off topic---- how much is a "quid"
@budmartin8297
@budmartin8297 5 жыл бұрын
google says it's slang for a pound.
@AshrafulmHaque
@AshrafulmHaque 2 жыл бұрын
Can I am connect cc3d flight controller
@Painless360
@Painless360 2 жыл бұрын
See my old CC3D series on the channel. I've not used one for a while!
@k.nishanthkamath8665
@k.nishanthkamath8665 5 жыл бұрын
how much range will i get with 200 mw
@Painless360
@Painless360 5 жыл бұрын
Depends on a lot of things - menacerc.co.uk/range-calculator can be very handy for checking things out..
@AlexisSLO
@AlexisSLO 6 жыл бұрын
Hello. I love your videos. But i think i made a mistake i cant check by now. Everyone says dont power up VTX withoit antenna. Whell i did and it was on about 30sec on 25mW. So how long does it take to burn it? I would like to test it, but i destroyed my VRX so cant recive video. I wonder if it can be burned, so i order new VTX now cos i would not like to wait 2 weeks for VRX to come and another 4weeks for the new VTX to come. I use TX001 Eachine VTX.
@Painless360
@Painless360 6 жыл бұрын
On lots of the cheaper transmitters it's usually very quick, a couple of seconds is all it takes to cause damage. On more expensive transmitters like things from TBS, they're designed to withstand transmission without the antenna attached for quite a long time. That's done so if you crash in the antenna snapped off then it doesn't fry your electronics. The only way you'll find out for sure, is to test it properly. Best of luck....
@AlexisSLO
@AlexisSLO 6 жыл бұрын
Crap... I tried it if it was hot, but was not. Now i dont know anyone to have vRX to test it. Is there any way to test it with multimeter? Like some setting that would tell me if it transmits the signal? Any responce would be good. I would meshure it on the board with antenna on. I dont have equipement for meshuring signal strenght like few people have as i saw in the videos. Thanx for your reply. Greentings from Slovenia ;)
@AlexisSLO
@AlexisSLO 6 жыл бұрын
Just one more question. Does it help if vTX vas set to 25mW and vTX has original soldered on 4cm pigtail with antenna mount or you thiink it is definetly burned? vTX is Aomway TX001
@AlexisSLO
@AlexisSLO 6 жыл бұрын
Whell the vTX is still alive. It did not got burned. Mavy helped that it was set on 25mW and it had original attached pigtail, so it took those 30sec without antenna It still works :)
@michaelbrewer7259
@michaelbrewer7259 8 жыл бұрын
I'm going to order everything listed above. I have a question about the antennas on Banggoods site they have 4 different types which is the correct one to get? L Type RP-SMA Male L Type SMA Male W Type RP-SMA Male W Type SMA Male
@Painless360
@Painless360 8 жыл бұрын
+Michael Brewer I'm not sure, depends on what antennas you have/are going to order.. I've not heard of W and L type..
@michaelbrewer7259
@michaelbrewer7259 8 жыл бұрын
Ok, your link redirects you to the page with the different antennas.
@Painless360
@Painless360 8 жыл бұрын
Check the images in the listing, looks like SMA male and W type (i.e. no L bracket). Check with the vendor before ordering..
@woozhi9218
@woozhi9218 7 жыл бұрын
how to increase my transmitter range amd how power booster work
@Painless360
@Painless360 7 жыл бұрын
Use a Tx with more Mw/power and use a high gain directional antenna. See the 'Introduction to FPV' series.. Best of luck!
@woozhi9218
@woozhi9218 7 жыл бұрын
Painless360 thanks
@christopherlyons7613
@christopherlyons7613 8 жыл бұрын
I have a couple questions regarding FPV: 1) You are using a 148 degree camera in this video. Do you find 148 to be the best choice for FPV? They also offer a 110 degree version. I think something narrower would be better. What are your feelings on the 110 version? 2) I'm from the US. So, what are the regulations for FPV use and power levels? I'm guessing this isn't an easy question but I'd like to get your take on this since I'm sure you are in contact with many US FPVers.
@Painless360
@Painless360 8 жыл бұрын
+Christopher Lyons I find the best views are 120-130 degree, any more feels like I loose too much detail in the centre of the image. Some fly up to 147 degree but that's the limit for me. I'd check with the local FPV resellers and check in the forums. I'd suspect that it's 25mw but every location seems to have a different law! Happy flying!
@christopherlyons7613
@christopherlyons7613 8 жыл бұрын
Thanks. What about 110?
@Painless360
@Painless360 8 жыл бұрын
See my previous answer ;) A lot of this is personal choice and what you are used to..
@djdaudeij
@djdaudeij 8 жыл бұрын
Hi! is the 110 degree camera the better choice for FPV? should I use CMOS or CCD (or does one of these options not work with the goggle?) can I power the camera/VTX with the flightbattery, or should I use a seperate one? thanks for the reply!
@Painless360
@Painless360 8 жыл бұрын
+djdaudeij Normally pilots use 110-130 degree field of view cameras for FPV. Any more and the important centre of the image starts to be very small. The camera technology will work with any transmitter, it's more about the voltage the camera works. Most will power the airside FPV camera and transmitter from the flight battery. Happy flying!
@djdaudeij
@djdaudeij 8 жыл бұрын
+Painless360 thanks for the reply!
@ShadrikEaston
@ShadrikEaston 8 жыл бұрын
Hey there. Will this set up work with a 2S setup? the connector looks like a 3S connector but the working voltage starts at 7v and goes up to 24. Any help would be appreciated.. kinda new at all this.
@Painless360
@Painless360 8 жыл бұрын
+Shadrik Easton Should do! Happy flying!
@ShadrikEaston
@ShadrikEaston 8 жыл бұрын
Thanks man. also, thanks for the quick reply :)
@CalisthenicsProgress
@CalisthenicsProgress 8 жыл бұрын
will this work with osd as I'd like to link it to my display. also is a 600mw better?
@Painless360
@Painless360 8 жыл бұрын
+CalisthenicsProgress Should do, any Vtx that lets you put the OSD between it and the camera should be fine.. Best of luck..
@valderja
@valderja 9 жыл бұрын
Nice review and a neat little package for the money. Can I just get the transmitter on its own? I've managed to smash the SMA connector off my 250mw Fatshark transmitter and after soldering back together, it's doesn't appear to be performing as well. Also, is the connector which goes into the camera the same as the Fatshark cameras connector? I have the 600TVL CMOS Fatshark camera which is good enough for me.
@Painless360
@Painless360 9 жыл бұрын
valderja Yep - I am using it with a FatShark Pilot HD camera at the moment on my latest build (tri-copter). Happy flying!
@valderja
@valderja 9 жыл бұрын
Thanks for that.
@valderja
@valderja 9 жыл бұрын
What kind of range do you find you're getting when flying a quad fairly low down with this setup using those CP/CL antennas?
@Painless360
@Painless360 9 жыл бұрын
I don't fly too low personally. there is a rule of thumb that your height should be 10% of the distance away from yourself to maintain a good connection. I have had the craft low about 240meters out and now had an issue though.. Hope this helps.
@valderja
@valderja 9 жыл бұрын
Good to know, thanks for the info. I found that I was having signal drop outs when I was a couple of hundred yards away when I was maybe only fifteen feet off the deck with my current setup. Signal is much better when I'm higher up
@tamimmahairy8321
@tamimmahairy8321 7 жыл бұрын
Greetings...could this FPV be connected to smartphone or Laptop?ThankYou
@Painless360
@Painless360 7 жыл бұрын
+Tamim Mahairy yes, a Google search should find all sorts of gadgets that will let you do that..
@mc7fifagamer158
@mc7fifagamer158 7 жыл бұрын
what's the range in this ? love your videos
@Painless360
@Painless360 7 жыл бұрын
Depends on what you end up with but 200ft plus should be possible on a 25mw Vtx with decent antennas.. Best of luck!
Budget FPV - Our favourite cheap kit, July 2016
8:59
Painless360
Рет қаралды 51 М.
Flipper Zero: Truth or Hype?
12:14
Hacking Modern Life
Рет қаралды 151 М.
Underwater Challenge 😱
00:37
Topper Guild
Рет қаралды 26 МЛН
Matching Picture Challenge with Alfredo Larin's family! 👍
00:37
BigSchool
Рет қаралды 38 МЛН
My Cheetos🍕PIZZA #cooking #shorts
00:43
BANKII
Рет қаралды 28 МЛН
I turned my Dyson Fan into a Bladeless Jet Engine
11:43
Integza
Рет қаралды 2,9 МЛН
Wireless Video Transmitter and Receiver from Aliexpress
5:51
Hacktuber
Рет қаралды 24 М.
DIY Lithium Battery - What could go wrong??
15:30
Linus Tech Tips
Рет қаралды 2,2 МЛН
5G Cellular Controlled Drone Boat - Long Range Test
24:24
rctestflight
Рет қаралды 542 М.
Review: ELGAE $26 200mW 5.8GHz FPV transmitter and camera
14:43
RCModelReviews
Рет қаралды 144 М.
Nest Cams are a BIG RIPOFF - DIY WiFi Security Camera Guide
9:40
Linus Tech Tips
Рет қаралды 2,5 МЛН
Which Amazon Gadgets Would Spies Use? | DEEP X
13:05
People Are Deep
Рет қаралды 237 М.
FPV Basics | Flite Test
13:30
FliteTest
Рет қаралды 641 М.
I waited 6 years for them to make this. // SKYZONE M5 ANALOG FPV MONITOR
11:09