precor 932i error 30 fix your treadmill IFT repair

Рет қаралды 25,724

5 жыл бұрын

If You find this video helpful, please subscribe! I upload a repair video every week.
Precor makes a good treadmill and their tech support is some of the best in the business. However, they don't go this in depth. Getting your equipment back up and running the same day,maybe a quick, easy, repair away. Not to mention you could a save a few hundred dollars. if this video helps you out be sure to like and subscribe. Thanks for watching.
Capacitor replaced in this video - amzn.to/3LlYOmy
rosin core solder - amzn.to/2VVdOzw
soldering wand - amzn.to/2O45ARk
Disclaimer:
Due to factors beyond the control of Grim Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Grim Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Grim Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of Grim Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not Grim Repair.
Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you.

Пікірлер: 94

@superspiderman60 11 ай бұрын

Brilliant video man. With your help, I replaced the bad capacitor myself, and now have a working treadmill again. Saved me hundreds. Thank you!

@germainayala3643 10 ай бұрын

Thanks brother

@teknisitreadmill Жыл бұрын

Nice master...

@youknow5569 7 ай бұрын

Nice Video. The first concern is a new controller is about 1500.00 from Precor. There are a few places that repair these controllers on eBay. And most people can't do component level soldering.

@ronaldroberge7585 4 жыл бұрын

GREAT VIDEO, THANKS. I NEED TO GET MORE TECH ON THE INVERTER I AM IN ELECTRICS AND NEED TO KNOW THE schematic DIA AND VOLTAGE OUTPUT IN THE 8V DC SIDE. I HAVE NO POWER ON THE SCREEN. WHEN I TAKE A READING FOR THE LAST TWO LEADS ON THE INTHEMET CABLE SIDE I GET 8V BUT IT JUMPS AROUND. USING A lDIGITAL METER.

@novltz 4 жыл бұрын

The authorized repair service charged $150 for a diagnostic (which is fine), and then wanted $1100 for this exact repair. Couple of handy folks at the office fixed it in 20 minutes for a $3 Capacitor and $7in tools...cant recommend this video enough

@GrimRepair 4 жыл бұрын

Great!

@GrimRepair 4 жыл бұрын

If you haven't already, make sure you check the dB resistor. If it is bad it could blow your now repaired ift drive again. It's easy here is a video I made on that. kzfaq.info/get/bejne/op5gdqp23KnMpnk.html

@treadmillrepair754 3 жыл бұрын

I fix this type of inverters for many years., Cybex use a similar inverter also. Some times is very easy, maybe one or two capacitors but sometimes went the power module blowup is not easy to fix it at all. I have many expensive tools, for do this. I earn a flat rate for any repair, easy or not. Best Regards.

@chrisb5917 4 жыл бұрын

Good on ya bud! I do PM and Repair on commercial fitness in the Middle Tn area and can appreciate your issues with these Precor Error Codes. Really helpful videos... especially on ERROR 15... Cheers!

@GrimRepair 4 жыл бұрын

Thanks, happy to help. If you need anything just let me know.

@Nanomi369 5 жыл бұрын

If you are clearing out errors, do they have to be done individually or can they be cleared out all at once. I have an error 30 msg. and it is the only one not clearing so I will check things out as you've demonstrated. Thanks for the demo. It looks like your screen is not reading.....you're not using it I presume?

@GrimRepair 5 жыл бұрын

I am not sure if you can clear them all at once - I am away from the equipment at the moment - but if error 30 won't clear you have something wrong. Everything works on this treadmill I think it's just the camera making the display look that way, and the TV screen up top was turned off. Thanks for watching!

@txguynnh 5 жыл бұрын

What’s your source for capacitors? Subscribed

@GrimRepair 5 жыл бұрын

Local electronics shop, like radioshack. The capacitors have numbers stamped on them. You could order them online if you don't have an electronics shop in your area. Thanks for subscribing.

@jasonher7641 3 жыл бұрын

Hey Grim Repair. Great video. Getting errors 15 and 30. Checked DB resistance and looks good. Possible it's the capacitor, but the thing that is surprising for me is all the clicking in the background. Still consistent with capacitor? Also if I take to Precor Authorized deal, will they try to fix the capacitor for me or just try to get me to spend $700? If so, then I figure I should try myself first. Thoughts? I can also send a video.

@GrimRepair 3 жыл бұрын

Thank you. Precor will probably want to sell you a whole new computer. I would spend a few bucks on a capacitor. there is a link in the description. Mine was also clicking.

@jasonher7641 3 жыл бұрын

@@GrimRepair thanks I was trying to figure out whether the clicking sound gave any other clues! Thanks again - ordering transistor today!

@jasonher7641 3 жыл бұрын

@@GrimRepair I did the repair, you are amazing!!!

@GrimRepair 3 жыл бұрын

@@jasonher7641 cool dude!

@HenryRodriguez-tu5ip Жыл бұрын

I’ve got error 28 on mine. I think it’s the fan. Doesn’t anyone know if their fans start upon turning on the treadmill or are they supposed to turn on based on temp.?

@user-nc9zu5tv2b Жыл бұрын

Hi colleague , I 'm from Russia . I also repair household appliances. please tell me what kind of soldering iron and breast pump you have, marking. thanks for earlier.

@sahilvahewala7612 5 жыл бұрын

Where do you typically get your IFT drives from and for how much? Just trying to make sure I do not get ripped off.

@GrimRepair 5 жыл бұрын

The last time I bought an ift drive I got it directly from precor. I belive it was about $700. That was probably about 7 years ago. Did you open yours up to see if it had any bad capacitors? Capacitors only cost $1.50.

@GrimRepair 5 жыл бұрын

Also before you install your ift back into the treadmill, you will want to check the d.b. resistor. Make sure it is good, or you may blow the ift drive again. Here is a video I made on how to do that. kzfaq.info/get/bejne/op5gdqp23KnMpnk.html

@fitnessingenieros6361 5 жыл бұрын

very good job you could help me with the reference of the capacitor or capacitor to have a reference point. thank you

@GrimRepair 5 жыл бұрын

Glad the video was helpful. I believe you're wanting to know the capacitance rating of the capacitor? I will check tomorrow and let you know. Was the same capacitor swollen on your ift drive?

@fitnessingenieros6361 5 жыл бұрын

@@GrimRepair excellent and thanks for responding, apart from this error code that other tips you can use on treadmills that you can help me, I am in Colombia and it would be very useful for me, very grateful for your attention.

@GrimRepair 5 жыл бұрын

@@fitnessingenieros6361 I will be filming all equipment repairs in the future. I encourage you to subscribe. If you turn on notifications you won't miss them. I don't have any tips at the moment, but if you have any specific issues I would be happy to help if I can just let me know.

@fitnessingenieros6361 5 жыл бұрын

@@GrimRepair thank you for your collaboration I will be aware

@GrimRepair 5 жыл бұрын

The capacitor I used was 330uf 10v capacitor

@santiagojosevelazquezcabre2280 4 жыл бұрын

Buddy, I'm looking for ift driver. Do you know where get it in ny or any state?? I need your help with that. Thks

@GrimRepair 4 жыл бұрын

Precor 1-800-347-4404

@771blahblah Жыл бұрын

hi, what does PW mean on the display panel? the unit turns on but the belt/motor doesn’t work, thanks

@GrimRepair Жыл бұрын

I'm not sure

@jeffbarnes7147 2 жыл бұрын

What tool/size do you use to remove the 4 bolts securing the IFT drive? It seems like it’s an 8 mm but all of my tools are too thick to get around it

@GrimRepair 2 жыл бұрын

I don't remember, it wasn't any thing special though.

@HenryRodriguez-tu5ip Жыл бұрын

Yea had same issue, replaced them with different bolts later. Try different sockets same size. Some makers make them thicker. Also use extensions.

@MariJani1 2 жыл бұрын

Do you have another link for the capacitor. The one provided they are sold out. Just want to make sure I buy the right one. Please and thank you

@GrimRepair 2 жыл бұрын

This should be the Same amzn.to/3LlYOmy

@MariJani1 2 жыл бұрын

@@GrimRepair thank you so much!

@MariJani1 2 жыл бұрын

I try to weld it in the back like you did because I came across the same issue but on wont wanna weld to the board. What could be the problem. ☹️

@GrimRepair 2 жыл бұрын

@@MariJani1 I would watch a video on soldering circuit boards.

@fanone7225 4 жыл бұрын

I have a 956i, there is no error, but once you set the speed at the beginning, you can’t change it. Any ideas?

@GrimRepair 4 жыл бұрын

Sorry, I am not familiar with that unit.

@rajulg5881 2 жыл бұрын

Sir The speed control pad is available

@GrimRepair 2 жыл бұрын

The speed control pad is fine, it's the cameras frame rate making it look that way.

@rajulg5881 2 жыл бұрын

@@GrimRepair I have 3 numbers of these model treadmills precore 932i it’s speed control key complaint get me the touch keys speed incease key Kindly give me your Wats up number I send the photos

@ganeshthavare4924 2 жыл бұрын

Error 20 means

@mesutyilmaz8169 4 жыл бұрын

Please repair the stuck key error.

@GrimRepair 4 жыл бұрын

What do you mean?

@virendrabarde2234 2 жыл бұрын

Sir error 30 comes in DC motor treadmill precore , please tel me what to do

@GrimRepair 2 жыл бұрын

? did you watch the video?

@shussing 5 жыл бұрын

I got the same error on my machine now. I also hear a clicking noise. Did you hear that as well?

@GrimRepair 5 жыл бұрын

I believe I did have a clicking noise every 5-10 seconds. After you repair the ift drive you will also want to check the dB resistor it's that rectangular bar with 2 brown wires on each end. It isn't causing the treadmill not to work, but if it's bad it can damage the ift drive. I will be making a quick video on it probably today. I will try to upload it tonight, so stay tuned.

@shussing 5 жыл бұрын

@@GrimRepair Thanks for the response. I am trying to get back to the error message using the 3 button sequence, but i dont know what it is for this unit.

@GrimRepair 5 жыл бұрын

@@shussing press reset,6,5, then use the up, down keys to scroll to the error log, press OK to see the errors and scroll through them using the up down keys.

@shussing 5 жыл бұрын

Grim Repair Hey Thanks! Interestingly i am seeing 2 Errors - Error 30 and Error 15. I wonder if my kid walking on it in reverse w/o the power being on has anything to do with the sudden failure. 😓

@GrimRepair 5 жыл бұрын

@@shussing I think error 15 is the dB resistor. If the resistor is bad it can damage the ift drive (which is error 30). I am headed home now and I will upload the video on how to test the resistor it also explaines what it does.

@Goomba_Smash Жыл бұрын

I bought a 444, and the IFT drive is missing!

@GrimRepair Жыл бұрын

Sorry, you can order them new from precor, or get one from ebay. Hopefully that's all that wrong with it.

@lisygonzalez242 Жыл бұрын

How about it says stuck key?? Error

@GrimRepair Жыл бұрын

Usually the red stop button is stuck, because some one hit it to hard. pop it back up. Let me know if that's not it.

@Ravenstalk 5 жыл бұрын

Hi, can you please write me? You are very handy, I need help with one treadmill. It throws error 30 and I dont know much what to do. Because it worked fine just before transport. Thank you :)

@GrimRepair 5 жыл бұрын

Well error 30 means the bottom half of the treadmill isn't able to communicate with the top half. Every time I have had error 30 it has been an issue with the ift. You could check the cat 5 cable that runs between the 2, if you took it apart to transport it it may have gotten pinched. Also make sure its plugged into the right port on the top half one is for the tv. Let me know what you find. Thanks for subscribing!

@Ravenstalk 5 жыл бұрын

@@GrimRepair I tried that cable, put it out and back but it seems pretty OK. I switch it off and back but nothing happened. Can you also get me email or FB or other comunication please ?

@Ravenstalk 5 жыл бұрын

It worked, I bought it today from a person who has it at home. We moved it by car and then taken to my gym. And after connection it puts on that ERR30. Cable looks alright. Can the moving of it damage some capacitor or something like that? It is the one more prehistorical than you have :)

@GrimRepair 5 жыл бұрын

@@Ravenstalk I would run a new cable from the ift to the upper board. You don't have to run it up the leg just to test it you can run it outside between the upper and lower.

@GrimRepair 5 жыл бұрын

@@Ravenstalk moving it could damage something if your not gentle. Did you disassemble it to move it? Have you opened up the ift and looked at the capacitors?

@danielp.6917 4 жыл бұрын

I got an error 15. Range was 98....now said an error 30, turned off and back on and now I get an error 15 again

@GrimRepair 4 жыл бұрын

Have you done a visual inspection of the inside of the ift drive?

@danielp.6917 4 жыл бұрын

I did yes...took off the ift drive as you did and got the circuit board off, noticed what seems to be the same capacitor swollen as you replaced. Everything else seemed ok

@GrimRepair 4 жыл бұрын

@@danielp.6917 I would replace that capacitor it will clear error 30 if that's all that's wrong and if your db resistor/ wiring is ok error 15 should also not come back.

@ganeshthavare4924 2 жыл бұрын

Plz reply